CS 5.5 ME: upgrade possible to CS 6 (without ME)?

Can I upgrade from the ME Design Premium Suite 5.5 to CS6? As I read, CS 6 is capable of setting Arabic and other right to left languages. But I did not buy this ME product from Adobe, so I am not sure if upgrade is possible.

Yes. Since CS6 there are no ME editions anymore. Contact support directly by phone or web chat, if you have specific questions and want your eligibility verified.
Mylenium

Similar Messages

  • What is the maximum ram upgrade possible on a Mid 2011 iMac 21.5-inch

    I have an iMac 21.5-inch, Mid 2011 running OS X 10.9.5 which currently has 4 GB 1333 MHz DDR3 Ram. The Hard Drive has 149.87 GB free out of 499.25 GB. It has been running slow for a while now. I would like to know what is the "TRUE" maximum Ram Upgrade possible. The reason I say "TRUE" is because the specs say one things when I find others saying another. I would like to install the maximum Ram that will increase the speed to its optimum. I have read some information that this particular computer will not take advantage of anything past a certain amount of ram.
    So with all that said, I am asking for specific numbers, types of ram, suggestions etc etc...
    Thanks

    Here's what you can do and need:
    Maximum Memory
    32 GB (Actual) 16 GB (Apple)
    Memory Slots
    4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
    Sources for memory I recommend are:
    OWC
    DataMem
    Crucial.com

  • Can I upgrade my version of Mavericks without being forced into Yosemite

    Can I upgrade my version of Mavericks without being forced into Yosemite ?
    Apparently, Yosemite breaks iMovie HD (a.k.a. iMovie 06).   I am considering a new Macintosh with 10.9.1  I would like to go to 10.9.5.
    Thanks

    Yes. You can run the Mac OS X 10.9.5 combo updater manually.
    (114891)

  • Is it possible to create l3vpn without enabling mpls in the core and PE routers .

    Hi 
    i have below setup , in this PE1,P,PE2 routers do not have mpls support , it have only MGRE and GRE tunnel support ,
    is it possible to create l3vpn without mpls here .
                              bgp session between PE1 and PE2, 
    CE1---------------PE1-----------------P---------------PE2------------CE2 .
    PE1,P,PE2 do not have mpls support .
    Thanks
    Duraipandi

    hi durai,
    you can use the vrf-lite model but this is complex to manage in larger networks.
    for example:
    CE1 ---PE----core(x)---P------PE---CE1
    CE2  --/                                    \----CE2
    in this case, without mpls, I need to create on the core(x) link 2 vrf's with 2 vlans to go to "P".
    and the same on the other PE and link.
    Now if you think that there are more P's with backup paths or more CE's that linkage exponentially increases to define those vlans and in all your P routers is that awareness of every CE route!
    MPLS just simplifies this; single core link,by just using labels. Your P routers only see PE next hops and are opaque to the number of vrf's you carry/service. Adding another P or PE device integrates into the routing naturally and MP BGP takes care of the PE advertisement. So expanding and rerouting are more natural and graceful here too.
    So while technically MPLS can be omitted, it is just not a smart thing to do from a design perspective in l3vpn.
    cheers!
    xander

  • I have mac OS X 10.5.8, can I upgrade to OS X Lion without going through OS X Snow Leopard?

    can I upgrade to OS X Lion without going through OS X Snow Leopard?

    Yes.
    Instead of upgrade, you can do fresh install Lion into another partition and so you would have multiboot 10.5.8 and 10.7.
    If you wish to use the the exisiting 10.5.8 partition to install 10.7 Lion, you can first create a 10.7 DVD. And use the 10.7 DVD to do installation instead.
    Here is how to create 10.7 DVD.
    http://lifehacker.com/5823096/how-to-burn-your-own-lion-install-dvd-or-flash-dri ve

  • How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since not enough hard drive space in my PC., How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since not enough hard drive space in my PC.

    How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since my PC not enough hard drive space.

    You'll have to delete sufficient GBs from your HD or transfer GBs to a second HD to free up sufficient space.
    Also look at these links.
    Windows - Change iPad default backup location
    http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
    Windows - Changing IPhone and iPad backup location
    http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
     Cheers, Tom

  • Upgrade bootcamp to 2.1 without running windows?

    I want to install Windows for the first time. I have Windows XP SP3 install disk, but I see I need BC 2.1 to install SP3 and I have just BC 2.0. Do you have any idea how to upgrade bootcamp to 2.1 without running windows, that I can't install without BC 2.1? Thank you.

    You are in a catch-22.
    BC 2.1 is suppose to improve device driver support. No harm trying, just backup OS X first, allow for partition size you can live with.
    When you have it running, insert Leopard, let it run Apple drivers, and see if BC 2.1 is offered. But given the trouble and reports, 'if it ain't broken' probably applies and wait before doing the update.
    I would take a look at WinClone and create a Windows image for restore purposes in OS X, just in case anyway.
    Just look at the long threads on BC 2.1 results!

  • Is it possible to transport variables without the planning areas??

    Someone knows if it's possible to transport variables without the planning areas, only the variables?
    Regards
    Guilherme

    Hi,
    Yes, if the p.area is available in target system.
    Use this report: UPC_TRANSPORT_BPS_ALL
    Regards,
    Suan

  • IS O&G - is it possible to use MPL without activating the ECC- DIMP?

    Hi
    We are an Oil and Gas industry and activated IS oil and gas in ECC6.0, our requirement is to use functionality such as Master Parts list which is there in ECC-DIMP under configuration control, as some companies within same group where MPL is required .
    The question is it possible to use MPL without activating the ECC- DIMP
    Request you to please help us to understand.
    Regards

    Hi Venkat,
    If a report is created over a DSO, it pulls data from the active table of a DSO. So as suggested in all the posts above it is not possiable to report on the DSO without activating it.
    Activation of DSO only allows to generate SID's to link transaction data and master data, SID's could also be generated at the time of reporting (When the report fetches data from BI server, but for the SID generation data is needed in active table). Also activation checks the correctness of data etc.
    Could you please let know why you want to report on the unactive request, is it having some problem with activation?
    Regards,
    Pankaj

  • Is it possible to use SCOM without an Opertaional database?

    Is it possible to use SCOM without an Opertaional database? (and without the data warehouse).

    Hi,
    No, it is not possible, you must at least have the Operational Database. But please check Microsoft Monitoring Agent, is that what you are looking for?
    Monitoring with Microsoft Monitoring Agent
    http://technet.microsoft.com/en-us/library/dn465153.aspx
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Is it possible to highlight text without a pop-up  being made in Acrobat XI?

    I am trying to figure out if its possible to highlight text without a pop-up being made as I am using the highlighter tool to just mark  important information for quizzes and do not need a pop-up made each time I highlight! Is there a way to disable pop-ups being created? Thank you for your time.

    Thanks for your reply Dave, but I want to know if a pop-up has to be created internally when highlighting. Can you disable to sticky note part of the highlight?
    Here's an example: I highlight my college books and don't need all those pop-ups being made behind the scenes. In Acrobat X, all of my highlights would slow down the program immensely,
    thankfully in XI, it doesn't happen at all, nor do I want it to in the future. Thank you for your time.

  • Is it possible to recieve imessages without sending them?

    My phone plan has unlimited texting but an extremely finite amount of data, so to save money I prefer to send and recieve sms text messages rather than imessages. Initially I had imessages completely turned off, but since I couldn't recieve imessages people thought that I was ignoring them when I wasn't. I just never got there imessage. (Why the stupid imessage system wouldn't change the message to sms or at least inform the sender that the message couldn't be recieved is annoying and a whole other problem, but I digress.) So I turned my imessages back on, but the dilemma of not wanting to waste my data by sending imessages still remains, and now every text I start wants to send as an imessage. So I ask my question: Is it possible to recieve imessages without sending them?
    On a related note, is it also possible to retrieve imessages that were sent to, but you never recieved because you had imessages turned off?
    Thanks! I really appreciate your help.

    Does anyone no anything about this? Thanks!

  • Is there a way to upgrade JDK on oracle 11g without upgrading oracle?

    Hi,
    I want to have the latest version of JDK on my oracle 11g server. Is there a way to upgrade JDK on oracle 11g without upgrading oracle?
    My Oracle version is 11.2.0.3 and java version is 1.5.0_35. Want to upgarde to 1.6
    Thanks.
    Edited by: 945559 on Jul 10, 2012 11:42 AM

    945559 wrote:
    I want to have the latest version of JDK on my oracle 11g server. Is there a way to upgrade JDK on oracle 11g without upgrading oracle?Even if you upgraded Oracle it wouldn't be a new version.

  • It is possible to unlock iphone without connecting itunes?????

    it is possible to unlock iphone without connecting itunes?????

    You cannot unlock from the carrier yourself...only the carrier can process and send the unlock...and you MUST use iTunes to process and implement the unlock.
    If your iPhone is disabled for another reason, you need to follow the article above, http://support.apple.com/kb/HT1212.

  • Is it possible to print wirelessly (WITHOUT A WI FI INTERNET CONNECTION) .Using my ipad 3 to an HP air printer.

    Is it possible to print wirelessly (WITHOUT A WI FI INTERNET CONNECTION) using my ipad3 and a HP air printer ?.

    Christina,
    The purpose of the AirPrint system was to permit printing directly from iDevices to printers that are AirPrint enabled without going through an intermediary device.  The catch is the printer must be an AirPrint enabled printer.  The iPad's apps will then recognize the printer and print seamlessly.  Follow the link Demo gave you to see the specifics from HP since that is the printer you asked about using.

Maybe you are looking for

  • Windows 8 All-In-One 1210v printer that stops and starts printing process

    My printer has worked well until a few days ago when it suddenly  started to load and begin printing, only to suddenly stop and "rest" then start again and do the same thing. This problem continues. The only thing I did that I thought might be the pr

  • How do I resize n A4 pdf to A5 pdf

    Hi Can anyone please tell me how I can resize an A4 pdf to A5 pdf or other format easily. Thank you

  • Working in the background and Displaying an image on top of everything

    Hi, I have two question 1-) How can I implement a program which would run in the background. For example while I am writing a document, my program will print the entered keys on the console. 2-) How can I draw an image without using Frames or anythin

  • Round up

    Since I am not a Very good English speaker ((-: I could figure out from the documentation how to round. I want to round up a number (integer) leaving only to digits after the decimal point. The 6.123 should become 6.12 but the 6.555 should become 6.5

  • Need help on complex configuration

    hi all, i share internet access with my neighbour. in order to do it i bought two airport express base station and configured them using wds. the main station is installed in my neighbour apartment; the remote station is installed in my apartment and