CS 5.5 screen size - required vs. recommended

Hi -
I installed CS 5.5 Design Standard on my desktop, which has a 1440 x 900 monitor, and it works fine. I plan to buy a new Windows 7 laptop and want to install the software on that machine as well. I'd like to get a smaller 15.6-screen laptop, but they have a resolution of 1366 x 768. The bigger 17.3-screen laptops have a resolution of 1600 x 900.
The CS 5.5 Design Standard tech specs on the Adobe site say 1024 x 768 is required, but 1280 x 800 is recommended. So it sounds like I can get the smaller 15.6-screen laptop because that fits within the requirements. But the second dimension is just a tiny bit smaller than what Adobe recommends (768 vs. 800). Will CS 5.5 still work well on the 15.6 laptop? How will it be affected by the screen size?
By the way, the main function of my new laptop will not be to do intense graphics work. I'll mainly use Word and other Office programs, plus watch movies, use the web, etc. So while I will be using CS 5.5, it will not be my focus, so I'd hate to buy a bigger laptop for that purpose alone.
Thanks for whatever help or advice you can give.
- Jan

jmalex wrote:
Thanks, Manish_1988. I guess I'm wondering what I will be missing by having 768 instead of the recommended 800. Will some menus disappear off the bottom of the screen, or anything like that?
It's a scaling issue; there's no cropping.

Similar Messages

, why do I get "Color Finesse requires a minimum screen size of 1024x768 yet I've got two full HD sc

Hello,
Once I try to open 'full interface' on color finesse 3 on After Effects CS5.5, why do I get: "Color Finesse requires a minimum screen size of 1024x768" yet I've got two full HD screens?
Thanks.

In addition to Dave's suggestions, if you haven't already done so, restart your computer. All we do is ask the OS for the screen size and check against 1024x768. We've seen on Windows that the OS gets confused sometimes and reports an incorrect size. Restarting fixes that.
When checking your screen size, be sure to subtract the size of the toolbar and any similar add-ons you might be running. Those all reduce the usable screen size, and we've seen cases (mostly laptops) where that reduces the height of the screen below 768.
Bob Currier
Synthetic Aperture

Embedding and Screen Size Recommendations?

When embedding a Captivate movie in a course that uses PowerPoint/Artculate do you embed the Captivate in the slide as a Flash movie or do you have it open in a seperate browser window? And for each option what size do you recommend recording the Captivates?

Use VitualHub instead. Works great.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

How do i make this page adapt to all screen sizes???

if i copy and paste my index code can someone please tell me if theres anything i can add so it will adapt to all screen sizes??
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Nicola Campbell Photography</title>
<style type="text/css">
#apDiv1 {
          position:absolute;
          width:1001px;
          height:170px;
          z-index:1;
          left: 438px;
          top: 221px;
#navbar {
          height: 40px;
          width: 900px;
          margin-right: auto;
          margin-left: auto;
          border-top-style: none;
          border-right-style: none;
          border-bottom-style: none;
          border-left-style: none;
</style>
<script src="js/modernizr-2.5.2-respond-1.1.0.min.js" type="text/javascript"></script>
<script src="js/jquery-1.7.2.min.js" type="text/javascript"></script>
<script src="js/jquery.flexslider-min.js" type="text/javascript"></script>
<script src="js/jquery.mousewheel.js" type="text/javascript"></script>
<script src="js/jquery.easing.1.3.js" type="text/javascript"></script>
<link href="css/style.css" rel="stylesheet" type="text/css" />
<link href="css/flexslider.css" rel="stylesheet" type="text/css" />
<script type="text/xml">

</script>
<style type="text/css">
#apDiv2 {
          position:absolute;
          width:901px;
          height:49px;
          z-index:2;
          left: 487px;
          top: 51px;
          text-align: center;
          color: #FF99FF;
          font-size: 80px;
          font-family: HaloHandletter;
#apDiv3 {
          position:absolute;
          width:409px;
          height:56px;
          z-index:3;
          left: 768px;
          top: 96px;
          color: #999999;
          font-family: "Adobe Garamond Pro";
          font-size: 24px;
#apDiv2 div {
          font-size: 100px;
          font-family: HaloHandletter;
          color: #999999;
#apDiv4 {
          position:absolute;
          width:901px;
          height:449px;
          z-index:4;
          left: 451px;
          top: 202px;
#apDiv5 {
          position:absolute;
          width:848px;
          height:152px;
          z-index:11;
          left: 433px;
          top: 201px;
#apDiv6 {
          position:absolute;
          width:200px;
          height:115px;
          z-index:5;
          left: 1250px;
          top: 138px;
#apDiv7 {
          position: absolute;
          width: 891px;
          height: 42px;
          z-index: 5;
          left: 552px;
          top: 174px;
#apDiv8 {
          position:absolute;
          width:48px;
          height:50px;
          z-index:6;
          left: 102px;
          top: 51px;
#apDiv9 {
          position:absolute;
          width:49px;
          height:51px;
          z-index:7;
          left: 152px;
          top: 51px;
#apDiv10 {
          position:absolute;
          width:49px;
          height:49px;
          z-index:8;
          left: 202px;
          top: 51px;
#apDiv11 {
          position:absolute;
          width:52px;
          height:52px;
          z-index:9;
          left: 252px;
          top: 51px;
</style>
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<meta name="Description" content="Welcome to Nicola Campbell Photography. I am based in Lancashire and specialise in Wedding Photography." />
<meta name="viewport" content="width=device-width" />
<link href="untitled.css" rel="stylesheet" type="text/css" />

<link href="iphone.css" rel="stylesheet" type="text/css" media="only screen and (max-width:320px)" />

<link href="ipad.css" rel="stylesheet" type="text/css" media="only screen and (min-width:321px) and (max-width:768px)" />

<link href="desktop.css" rel="stylesheet" type="text/css" media="only screen and (min-width:769px)" />
<style type="text/css">
#apDiv12 {
          position:absolute;
          width:1013px;
          height:648px;
          z-index:1;
          left: 321px;
          top: 299px;
</style>
</head>
<body onload="MM_preloadImages('navbaroriginalroll_r1_c1.jpg','navbaroriginalroll_r1_c2.jpg','n avbaroriginalroll_r1_c5.jpg','navbaroriginalroll_r1_c6.jpg','navbaroriginalroll_r1_c7.jpg' ,'navbaroriginalroll_r1_c8.jpg','navbar_r1_c4.jpg')">
<div id="apDiv2">
<div align="center">nicola campbell</div>
</div>
<div id="apDiv3">P H O T O G R A P H Y</div>
<div id="apDiv7"><a href="index.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('navbar','','navbaroriginalroll_r1_c1.jpg',1)"><img src="navbaroriginal_r1_c1.jpg" alt="c1" name="navbar" width="111" height="40" border="0" id="navbar2" /></a><a href="Aboutme.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image13','','navbaroriginalroll_r1_c2.jpg',1)"><img src="navbaroriginal_r1_c2.jpg" name="Image13" width="111" height="40" border="0" id="Image13" /></a><a href="Gallery.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image21','','navbaroriginalroll_r1_c5.jpg',1)"><img src="navbaroriginal_r1_c5.jpg" alt="c5" name="Image21" width="111" height="40" border="0" id="Image21" /></a><a href="Blog.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image22','','navbaroriginalroll_r1_c6.jpg',1)"><img src="navbaroriginal_r1_c6.jpg" alt="c6" name="Image22" width="111" height="40" border="0" id="Image22" /></a><a href="ContactMe.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image23','','navbaroriginalroll_r1_c7.jpg',1)"><img src="navbaroriginal_r1_c7.jpg" alt="c7" name="Image23" width="111" height="40" border="0" id="Image23" /></a><a href="Clients.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image24','','navbaroriginalroll_r1_c8.jpg',1)"><img src="navbaroriginal_r1_c8.jpg" alt="c8" name="Image24" width="111" height="40" border="0" id="Image24" /></a><a href="Weddings.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image25','','navbar_r1_c4.jpg',1)"><img src="navbar_r1_c41.jpg" alt="" name="Image25" width="111" height="40" border="0" id="Image25" /></a></div>
<div id="apDiv5">
<script type="text/javascript">
// BeginOAWidget_Instance_2827522: #OAWidget
$(window).load(function() {
      $('#slider').flexslider({
              namespace: "flex-",             //{NEW} String: Prefix string attached to the class of every element generated by the plugin
    selector: ".slides > li",       //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
      animation: "slide",
             easing: "swing",               //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
      direction: "horizontal",   //String: Select the sliding direction, 'horizontal' or 'vertical'
    reverse: false,                 //{NEW} Boolean: Reverse the animation direction
    animationLoop: false,             //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
    smoothHeight: true,            //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
      slideshow: true,                //Boolean: Animate slider automatically
      slideshowSpeed: 5000,           //Integer: Set the speed of the slideshow cycling, in milliseconds
      animationSpeed: 600,         //Integer: Set the speed of animations, in milliseconds
      initDelay: 0,                   //{NEW} Integer: Set an initialization delay, in milliseconds
      randomize: false,               //Boolean: Randomize slide order
             useCSS: true,                   //{NEW} Boolean: Slider will use CSS3 transitions if available
      touch: true,                    //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
       video: false,                   //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
      directionNav: true,             //Boolean: Create navigation for previous/next navigation? (true/false)
      controlNav: true,               //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
      keyboard: true,              //Boolean: Allow slider navigating via keyboard left/right keys
      mousewheel: false,              //Boolean: Allow slider navigating via mousewheel
      prevText: "Previous",           //String: Set the text for the "previous" directionNav item
      nextText: "Next",               //String: Set the text for the "next" directionNav item
      pausePlay: false,               //Boolean: Create pause/play dynamic element
      pauseText: "Pause",             //String: Set the text for the "pause" pausePlay item
      playText: "Play",               //String: Set the text for the "play" pausePlay item
      startAt: 0,                //Integer: The slide that the slider should start on. Array notation (0 = first slide)
      pauseOnAction: true,            //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
      pauseOnHover: true,            //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
      start: function(){},            //Callback: function(slider) - Fires when the slider loads the first slide
            controlsContainer: "",          //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is                                                             not found, the default action will be taken.
       manualControls: "",             //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
       // Carousel Options
    itemWidth: 0,                   //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
    itemMargin: 10,                  //{NEW} Integer: Margin between carousel items.
    minItems: 0,                    //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
    maxItems: 0,                    //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
    move: 0,                        //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
            before: function(){},           //Callback: function(slider) - Fires asynchronously with each slider animation
      after: function(){},            //Callback: function(slider) - Fires after each slider animation completes
      end: function(){}               //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
<script type="text/javascript">
// BeginOAWidget_Instance_2827522: #OAWidget
$(window).load(function() {
      $('#slider').flexslider({
              namespace: "flex-",             //{NEW} String: Prefix string attached to the class of every element generated by the plugin
    selector: ".slides > li",       //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
      animation: "slide",
             easing: "swing",               //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
      direction: "horizontal",   //String: Select the sliding direction, 'horizontal' or 'vertical'
    reverse: false,                 //{NEW} Boolean: Reverse the animation direction
    animationLoop: false,             //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
    smoothHeight: true,            //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
      slideshow: true,                //Boolean: Animate slider automatically
      slideshowSpeed: 5000,           //Integer: Set the speed of the slideshow cycling, in milliseconds
      animationSpeed: 600,         //Integer: Set the speed of animations, in milliseconds
      initDelay: 0,                   //{NEW} Integer: Set an initialization delay, in milliseconds
      randomize: false,               //Boolean: Randomize slide order
             useCSS: true,                   //{NEW} Boolean: Slider will use CSS3 transitions if available
      touch: true,                    //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
       video: false,                   //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
      directionNav: true,             //Boolean: Create navigation for previous/next navigation? (true/false)
      controlNav: true,               //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
      keyboard: true,              //Boolean: Allow slider navigating via keyboard left/right keys
      mousewheel: false,              //Boolean: Allow slider navigating via mousewheel
      prevText: "Previous",           //String: Set the text for the "previous" directionNav item
      nextText: "Next",               //String: Set the text for the "next" directionNav item
      pausePlay: false,               //Boolean: Create pause/play dynamic element
      pauseText: "Pause",             //String: Set the text for the "pause" pausePlay item
      playText: "Play",               //String: Set the text for the "play" pausePlay item
      startAt: 0,                //Integer: The slide that the slider should start on. Array notation (0 = first slide)
      pauseOnAction: true,            //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
      pauseOnHover: true,            //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
      start: function(){},            //Callback: function(slider) - Fires when the slider loads the first slide
            controlsContainer: "",          //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is                                                             not found, the default action will be taken.
       manualControls: "",             //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
       // Carousel Options
    itemWidth: 0,                   //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
    itemMargin: 0,                  //{NEW} Integer: Margin between carousel items.
    minItems: 0,                    //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
    maxItems: 0,                    //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
    move: 0,                        //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
            before: function(){},           //Callback: function(slider) - Fires asynchronously with each slider animation
      after: function(){},            //Callback: function(slider) - Fires after each slider animation completes
      end: function(){}               //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
<div id="main-container">
    <p> </p>
    <div id="main" class="wrapper clearfix">
      
      <div id="container">
        <div id="slider" class="flexslider">
          <ul class="slides">
            <li> <img src="hollie.jpg" width="500" height="600" /> </li>
            <li> <img src="slider2.jpg" width="500" height="600" /> </li>
            <li> <img src="slider3.jpg" width="500" height="600" /> </li>
            <li> <img src="slider8.jpg" width="500" height="600" /> </li>
            <li> <img src="slider4.jpg" width="500" height="600" /> </li>
            <li> <img src="slider5.jpg" width="500" height="600" /> </li>
            <li> <img src="slider6.jpg" width="500" height="600" /> </li>
            <li> <img src="slider1.jpg" width="500" height="600" /> </li>
          </ul>
        </div>
        <div id="carousel" class="flexslider" style="display:none;">
          <ul class="slides">
            <li> <img src="hollie.jpg" width="500" height="600" /> </li>
            <li> <img src="slider2.jpg" width="500" height="600" /> </li>
            <li> <img src="slider3.jpg" width="500" height="600" /> </li>
            <li> <img src="slider8.jpg" width="500" height="600" /> </li>
            <li> <img src="slider4.jpg" width="500" height="600" /> </li>
            <li> <img src="slider5.jpg" width="500" height="600" /> </li>
            <li> <img src="slider6.jpg" width="500" height="600" /> </li>
            <li> <img src="slider1.jpg" width="500" height="600" /> </li>
          </ul>
        </div>
      </div>
    </div>
    
</div>

</div>

<div id="apDiv8"><a href="https://www.facebook.com/nicola.shulmancampbell?fref=ts"><img src="Retro-Facebok-Rounded-128.png" width="48" height="48" /></a></div>
<div id="apDiv9"><img src="Retro-Flickr-Rounded-128.png" width="48" height="48" /></div>
<div id="apDiv10"><img src="Retro-Tumblr-Rounded-128.png" width="48" height="48" /></div>
<div id="apDiv11"><a href="https://twitter.com/nicola_shulman"><img src="Retro-Twitter-Rounded-128.png" width="48" height="48" /></a></div>
<script type="text/javascript">
$(window).load(function() {
      $('#slider').flexslider({
              namespace: "flex-",             //{NEW} String: Prefix string attached to the class of every element generated by the plugin
    selector: ".slides > li",       //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
      animation: "slide",
             easing: "swing",               //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
      direction: "horizontal",   //String: Select the sliding direction, 'horizontal' or 'vertical'
    reverse: false,                 //{NEW} Boolean: Reverse the animation direction
    animationLoop: false,             //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
    smoothHeight: true,            //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
      slideshow: true,                //Boolean: Animate slider automatically
      slideshowSpeed: 5000,           //Integer: Set the speed of the slideshow cycling, in milliseconds
      animationSpeed: 600,         //Integer: Set the speed of animations, in milliseconds
      initDelay: 0,                   //{NEW} Integer: Set an initialization delay, in milliseconds
      randomize: false,               //Boolean: Randomize slide order
             useCSS: true,                   //{NEW} Boolean: Slider will use CSS3 transitions if available
      touch: true,                    //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
       video: false,                   //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
      directionNav: true,             //Boolean: Create navigation for previous/next navigation? (true/false)
      controlNav: true,               //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
      keyboard: true,              //Boolean: Allow slider navigating via keyboard left/right keys
      mousewheel: false,              //Boolean: Allow slider navigating via mousewheel
      prevText: "Previous",           //String: Set the text for the "previous" directionNav item
      nextText: "Next",               //String: Set the text for the "next" directionNav item
      pausePlay: false,               //Boolean: Create pause/play dynamic element
      pauseText: "Pause",             //String: Set the text for the "pause" pausePlay item
      playText: "Play",               //String: Set the text for the "play" pausePlay item
      startAt: 0,                //Integer: The slide that the slider should start on. Array notation (0 = first slide)
      pauseOnAction: true,            //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
      pauseOnHover: true,            //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
      start: function(){},            //Callback: function(slider) - Fires when the slider loads the first slide
            controlsContainer: "",          //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is                                                             not found, the default action will be taken.
       manualControls: "",             //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
       // Carousel Options
    itemWidth: 0,                   //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
    itemMargin: 10,                  //{NEW} Integer: Margin between carousel items.
    minItems: 0,                    //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
    maxItems: 0,                    //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
    move: 0,                        //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
            before: function(){},           //Callback: function(slider) - Fires asynchronously with each slider animation
      after: function(){},            //Callback: function(slider) - Fires after each slider animation completes
      end: function(){}               //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
</body>
</html>

APDivs cannot be resized.
APDivs in primary layouts won't work in Responsive Web Design.
APDivs are a very poor layout method.
For this reason, Adobe removed APDivs from Dreamweaver CC.
Example of Fluid Grid Layout with floats & margins, no APDivs required.
http://alt-web.com/FluidGrid/Fluid2.html
Nancy O.

Final Cut Studio 2: Requirements and Recommendations

Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b

SORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b
Message was edited by: Rinaldo

Screen Size reduced

Have just switched my Ipod on and have noticed the screen size has reduce all the way around the outside by about 2 or 3mm. It used to fill the complete LCD display. Anyone know why this is and how it can be fixed?

hiya!
this is a longshot. by any chance, are the affected videos DV format videos that were converted using QT Pro? if so, perhaps check on this possibility:
QuickTime Pro: DV format movies may require adjustment for iPod
otherwise, it might be worth checking to see if it's all files that are showing up funny, or just some of them. the sample files and techniques in this document might be helpful with that:
Verifying iTunes video conversion and iPod video syncing using sample QuickTime files
love, b

TOC, streaming video and screen size

Hello,
A recent project is shaping up to be a video based course. The purpose of the project is to introduce and explain a sales software package.
Before I start to work I need to ensure Captivate 7 can cover three basic requirements;
1. The end user needs must have access to a table of contents so they can switch between slides/content and have the freedom to move about. I know that Captivate 7 can accommodate this.
2. To be able to embed streaming video. It is important that the video appears to be a part of the content and not open to a new window at anytime. Also, the rewind and pause buttons for the video are controlled by Captivate 7 inbuilt buttons and not those of the video streaming host.
3. Ensure the screen size for the learning package is restricted to a specific size. Reason being, some users will have desktop screens at 1920 x 1080 and this will "blur" the video content if stretched to that size.
Might Captivate 7 fulfill items two and 3?
Your feedback and thoughts are most appreciated!
Sincere thanks

Hate to answer my own question, but I figured out a way to do what I want.
1. open movie file in QT.
2. Resize it and save.
3. Open file with skin movie (see link in my orig post).
4. then view < normal.
It basically fits it to the screen which is the exact dimensions of the movie. If I do not view<normal then the movie is offset I can not even see it. And resetting the offset does nothing.
If anyone has a better way (less steps) to get a borderless movie to resize and fit to screen, please let me know. This works but it is cumbersome.
Thanks.

Disk size requirement

Hello,
I'm planning the installation of an SDS. I don't find any reference to the disk size requirements in the documentation. Is the any recommendation ?
We will be managing Solaris Sparc 8,9, 10 as well as Soalris X64 and Linux RHES 3 and 4. Around 100 servers for the whole farm.
Could someone point me to some recommendation ?
Best regards

For installing an SDS, here is the recommendation:
Disk Space Requirements:
Installation: 512 MB minimum free in the file system that serves /usr/local
Software Components: 500 MB minimum
SWAP: 500 MB minimum
For more information, see:
http://docs.sun.com/app/docs/coll/1561.1

Creating app for multiple screen sizes?

Hello. I've recently created an .apk file from Flash Professional using AS3 (probably obvious in this forum, but I wanted to be clear). I've been testing it on an ASUS Android tablet. However, I realized that even if I get the app to look fine on this tablet, there are other tablets out there with many different sizes that could have the app look weird.
I've been searching Google for tips on this, but a lot of it doesn't make sense. Is there a pretty easy way to get your app to 'read' the tablet's dimensions and scale itself to those dimensions? I know I could make a different file for each screen size, but wouldn't that require putting several different app files in the app store? That seems silly. Any tips?

first, you should check the scaleMode property of the stage which will allow you to specify how your stage is sized to fit the display.
then, you can use the stage's stageWidth and stageHeight properties to size and position your display elements, if that's needed (because with showall you probably won't need to do any sizing/positioning).

Can the Parameter Enter Value screen size be adjusted?

I have a report that will have up to 4 to 5+ different individual Parameters that will require the users to populate.
Since I am using a larger number of parameters the Enter Value screen size is small and not all of the parameters are displayed on one screen. the users are required to scroll down in order to see and populate the other Parameter selections.
Is there a way to adjust the default size of the Parameter enter Value screen that the end users will see when using the Cyrstal Report Viewer?

Try Service Pack 3, if still not then it's likely the type of parameters you are using.
Bottom line is if there is no option to change the size of that window. I believe someone asked for this and I entered it in as an enhancement request. Some future version may eventually have the ability to auto-size.
At the top of this forum you'll see a Feature Request link, add your suggestion there, search first though in both of the links.
Thank you
Don

ITS mobile - Screen size on mobile device is too small

Hi,
I'm not able to change the screen size of my ITS Mobile application.
If somebody can help me ...
Here are the data:
Internet service parameters
~DYNPRO_COMPRESSION : 1
~GENERATEDDYNPRO : 0
~ITSMOBILE : 1
~ITSMOBILEELEMFACTOR : 9
~ITSMOBILEELEMUNITS : px
~SOURCES : ZSAPLOG_MOBILE,ITSGENMOBILE4
~THEME : 99
~TRANSACTION : ZSAPLOG_MOBILE
Internet service templatesGenerating style: MOBILE4 (Mobile Device (No HTML tables))
ICF service - GUI Configuration
~THEME : 99
~TRANSACTION : ZSAPLOG_MOBILE
~ITSMOBILE : 1
~SOURCES : ZSAPLOG,ITSGENMOBILE4
~ITSMOBILEELEMFACTOR : 9
~ITSMOBILEELEMUNITS : px
~POPUPS : 1
~SHOW_SYSTEM_MODAL : 1
~STYLE : DHTML
LRFMDscreen size is set to 16x20ITS
Versions
SAP_BASIS : SAPKB73108
SAP NETWEAVER : SAP EHP3 FOR 7.0
Mobile device
Model : PIDION HM50 E
CPU : Samsung Electronics(R) S5PV210
OS : WEHH 6.5 Professional
VER : Windows CE 5.2.29077
Thanks for your help
Philippe

Perhaps an option to set the default font for discussion threads in the user preferences would be the best idea. One would think however that the Jive developers would have come up with something like that already.
For what it's worth:
http://www.w3.org/QA/Tips/font-size
Do not specify the font-size in pt, or other absolute length units for screen stylesheets. They render inconsistently across platforms and can't be resized by the User Agent (e.g browser). Keep the usage of such units for styling on media with fixed and known physical properties (e.g print).
Once again, I wonder about Jive development. Anyway, 10 pt is not best practice. It's standard for printed media, but not for screens. A search in Google shows that most recommend 16 pixels or more. Not sure what this is in points. I think 10 points is about 12 pixels, depending on screen dpi/ppi. I cannot imagine how tiny 10 pt must look on any of the high resolution Retina displays, which have twice or more density than conventional 72 dpi.

ITS Mobile screen sizes too small on iPhone device

Hi Everybody,
I am facing the some problems relating to screen sizes on iphone mobile. The ITS service and the templates were working fine at the desktop level..But, in iPhone,screen sizes are too small to view.We need to zoom it and enter.I have tried with screen format 16X20 and 16X20ITS.
Can any body provide the solution to fix the problem?
Regards,
Mahesh

You must have a very high resolution screen, also called HiDpi.
If you have Photoshop CC 2014, you can go to Edit > Preferences > Experimental Features and checkmark "Scale UI 200%"
If you have CC, CS6, or below, there is no way to scale the UI as of yet. There may not be. These products are no longer being updated.
At best I can recommend reducing the resolution down to around 1400 px horizontal. That's not the native resolution and defeats the purpose of having a Hidpi screen.
So only thing left aside from returning the laptop, is to work with a large external monitor, or for $10/monthly, join the Photography Plan and you can use CC 2014 and the 200% UI.

Air 15 known issues - wrong screen size and dpi

Will the next update of Air 15 solve the issues below..
the dpi problem with iPhone 6 plus is a show stopper, i cant get away with delivering a reduced dpi
... under pressure to update 20+ applications ...
Known Issues AIR 15.0.0.183
[ iPhone 6 Plus] [Launch image] A blank screen observed in apps when Default-568h@2x is packaged.
[ iPhone 6 Plus] Wrong screen size and dpi is returned through the runtime APIs .
[ iPad 3 and later] iPhone Launch image(Default@2x. png ) appears on iPad if iPhone launch images are packaged along with iPad launch images
Well done to the Air team for the good work done so far, not easy keeping up with Apple on IOS8 at the moment...

I am having simliar issue where I can get the iphone 6 launch image to work but not the iphone 6+ when using [email protected], 2208x1242. Also the stage.fullScreenWidth/Height give 1472x828, which is 2/3 the expected dimensions or 736x414 at scale factor 2, not 3. I hope adobe fixes this soon or we won't be able to launch new games with Apple as it is a requirement to have your apps Iphone 6/6+ optimized. If this isn't fixed soon were pretty much forced to abandon adobe and move onto another software solution that will allow us to build for Apple.

Screen size issues

Hi it's me again
Another problem I am struggling to resolve at the moment is
the screen size on published files. For example, if I publish in
swf and link it to a menu the screen size is too big on that movie.
I have saved the movie as full screen (menu screen size is fine).
If, however, I save my movie as exe and attach it to the menu (full
screen option) the size of the screen is right, but I get a warning
message up first, entitled File Download - some files can harm your
computer...and then gives options to open, save, cancel or more
info. If you select open then the movie starts fine and the screen
size is perfect, but I don't want this warning message up each
time.
Does anyone know what I can do to achieve the right screen
size without the error message?
I've been hunched over this thing and my shoulders ache - I'm
off to get some red wine!
Cheers
Julesy A

Hi Julesy A and welcome to our community
Sounds like you are creating .EXE files and pushing those to
a server. When you do this, you will always receive the "Save file
to your hard drive or run from here?" dialog. There simply isn't a
way around it.
What is the recorded size of your movie? Hopefully it is
smaller than your existing screen size. 1024x768 is typical for
Windows XP systems. It's best to avoid recording full screen.
Especially at that resolution. I always opt for the lowest common
denominator and my personal favorite size is 640x480. I find there
isn't much I can't display using this size.
Also, perhaps you are confused about what the "Full Screen"
option does for you when you publish. If you publish in .SWF
format, you have the option of including an HTML "companion page".
This page is intended to display your movie. If you choose the
"Full screen" option, you get TWO HTML pages. One you will link to.
Then when this page is displayed, your user will click a link that
opens the second in the "Full Screen" mode.
From what you have posted, I'm guessing your best bet is to
use the .SWF output. I also highly recommend using the HTML pages
to display the .SWF content.
Hope this helps... Rick

Best Adobe Captivate Screen Size for all Devices?

Which would you say is the best screen size to use to cater for all device types (pc, laptop, tablet, mobile, etc.)?
Thanks.

Hi there,
You can select any moderate screen size and publish the course and on the publish dialog box, check "Scalable HTML content" (only in case of .swf, HTML5 and PDF).
If you are not sure about which screen size to choose and you are creating a course for large audience for devices and systems of different resolution, then 800 X 600 is recommended.
But now, with scalable HTML content checked, your course window will fit to the screen size of the device, and there will not be any scroll bar.
Thanks.

CS 5.5 screen size - required vs. recommended

Similar Messages

Maybe you are looking for