CS 5.5 test is fast on first open, then sluggish after

I just tested out some swiping gestures using CS 5.5 on my iPad 1.
I'm using 5 1024x760 JPGS and just using swipe gestures to go back and forth.
The first time I put the app on my iPad, the app runs great, no lag or hiccups.
When I close it, it suspends the app due to the multitasking support, and then I reopen it and it's really sluggish and herky jerky. Even if I force quit the app and reopen it, it's sluggish again.
Does anybody happen to know why this would happen? It's rather dissapointing considering how nice and smooth it runs on first run.
Thanks!

Thanks for the response Colin.
My original test was GPU - no caching which ran great the first time, and horrible any other time i open the app.
I tried a few things:
CPU with no bitmap caching - The first run and the consecutive runs all ran the same, but were too chuggy.
GPU with bitmap cachine - Very chuggy the first time, and the same when opened again.
I thought I read somewhere that you dont need to do the bitmap caching with the new AIR update and that you were supposed to almost always use GPU. So that would explain why it ran so well on my first run with GPU and no caching. But for the life of me, I cant get the app to run smoothly any time after the first run with those settings.
I understand that i'm moving full screen JPG's, but it really shouldnt be that difficult or intensive. I was really hoping for a big improvement with AIR 2.6/CS 5.5 but if I cant even do this simple test, I'm worried about anything else I need to do to release a successfull app.

Similar Messages

Acrobat Plugin should first open, then I want to stream a PDF

Hi,
when I stream a PDF (which is packaged in a ByteArrayOutputStream) to the Browser, the Acrobat Reader plugin opened not until the whole document
is loaded. Is there a header, or anything else I have to set in my servlet to make sure that first the Acrobat plugin open and then the streaming starts. I need this behaviour, because if my user have a slow internet connection, he should have the chance to see the first page of the document during the rest of the document is still loaded in the backround.
code:
//document = PDF as ByteArrayOutputStream
ServletOutputStream servletOut = response.getOutputStream();
response.setContentType("application/pdf");
response.setContentLength(document.size());
document.writeTo(servletOut);
response.flushBuffer();
servletOut.flush();

So that's my last post to this topic. For all, which have a similar problem, in future : It's not a Java problem, it's a problem of the PDF document. If you want the behaviour that the Acrobat Plugin opened first you have to make sure that you have a "Linearized PDF". I use iText to create a PDF, but it's a pity that iText don't support Linearization.

Won't wake at first. Then wakes after restart attempts as if nothing was wrong!

Hi guys. This has happened twice now so I know I'd better find out what's going on because something's wrong and I'm being given a warning.
I closed the computer lid. I came back hours later; opened it up and it wouldn't wake up. I shut it down by holding down the power button, then started it back up. The system won't restart but the fan comes on. Then I do this several times. I try the P-ram restart method also. Eventually, it wakes from sleep just as if none of those restart attempts had been made! That is, there was my Safari layout just the way I'd left it and everything was operational!
What is going on. What needs to be fixed? Thanks.

It's possible the system is entering deeper hibernation (depends on what year model it is). But if that's the case, wait longer... Open the lid and just give it a minute or so. See if the screen eventually displays properly.

Why Firefox do not open quick-luncher page when first open firefox?

Firefox do not open quick-luncher page when first open firefox.
but after firefox opened, when i open one new tab page, the quick-luncher page is opened.

Such JavaScript links should show the image in the same tab, so make sure that you left click such links.
* http://kb.mozillazine.org/JavaScript
Try to reload the web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

Playback speeds up intermittently on first scene when played after build

Hi
I have a problem with playback on apple dvd player after completing the build? When I play the authored project on apple dvd player after the build, after clicking on the play button in the main menu, the first scene (about 1 min. long) playback speeds up intermittently-normal speed then fast for a second then normal then fast-jumpy I guess might describe it. This only happens on the first scene with all the other scenes after this point in the timeline playing fine. I placed 2 new clips (different assets-scenes) to replace the first scene & the same issue happens with different asset clips being used in the same position (first) in the track timeline.
The scenes I used are pans of a running deer, which play fine anywhere else in the track timeline except the first position. When I play the project it's fine in simulator mode & in the project itself...this only happens after the build when playing on apple dvd player from VIDEO_TS folder. This is a test project for some footage so it's only 10 minutes long with bit rates at 5-6 ave. & 6-7.4 max.
-2 pass VBR-best motion.
Any ideas on what is going on?
I'm using DVDSP 2 with Jaguar 10.2.8.
Thanks for any help.
Della

Della:
Not a clue about the problem, sorry, but can "imagine" a workaround just to fool the problem.
You must have a PLAY button that connect to that first scene (first chapter in the track, I guess). If you connect that button to the second chapter (just to try) that plays fine or again behaves as it was first?
If that way plays fine, you can add a "false" first scene (i.e. one second of black exported from FCP) and connect the PLAY button to the real first (now second in the track) chapter.
I told you, it's just a workaround to have in hand in case your dead line gets close!!

How can I prevent Firefox automatically updating when first opened on a new CentOS Installation ?

Hi,
I just installed CentOS on a new virtual machine for testing. I need to run Firefox 28 on it.
NO. Don't argue. It needs to be firefox 28.. Yes, I know firefox 35 is out. Yes I know it fixes important vulnerabilities. Yes, I know it has a load of new features. That information won't help me in the slightest. I need Firefox 28 on this virtual machine for a very specific reason, firefox 29, 30, 31, 32, 33, 34 and 35 won't be suitable for this purpose.... The reason I need it is to do with testing a specific website compatibility with older browser versions on multiple operating systems. I am fully aware that the latest version of firefox is the "best"... but it's not what I need right now, so please don't ask questions like "why are you using an older version" or suggest things like "you know, it's really in your best interests to use the latest version"... I get it, OK.... but that's not a helpful reply to this question, because I have a really specific requirement here.
... sorry if that seems rude, I just know what sort of replies get posted here whenever someone suggests using an older browser. I do get why people give such advice. I do understand the benefits of keeping computers that connect to the internet up to date. This particular Virtual Machine won't actually be used to connect to the internet... just to a test website on an intranet.
So the problem I have is that this installation of CentOS 6.4 (x64) comes with Firefox 31. When it first opens, before I have a chance to toggle off update checking, it begins downloading Firefox 35.0.1 and I haven't figured out how to abort the download. I thought about killing the task, but I feared what that might do. So I let it update to Firefox 35 and thought I'd just downgrade it to Firefox 28 afterwards.
I do have the standalone installation of Firefox 28 for linux (firefox-28.0.tar.bz2). I can extract it on the CentOS virtual machine. I thought for my purpose, I could then just run the browser binary.... but it started updating before I could change the option to never check for updates... and there's no option to abort the download there....... sigh...
So I tried editing the file update-setting.ini. I was quite hopeful when I saw it say:
; If you modify this file updates may fail.
; Do not modify this file.
So I changed the setting below to say:
[Settings]
ACCEPTED_MAR_CHANNEL_IDS=dont_update_this_please
hoping that my rather rash change might indeed cause updates to fail :-)
Sadly, it seems that the updates are still happening.
Basically here is what I need on CentOS - A way to run Firefox 28 without it updating to a newer version without asking me first. I don't mind if it keeps asking me... so long as it asks me instead of just doing it without asking.
Just to be clear again - this is for a test configuration I have to build, on a virtual machine. It's OK for this one specific machine to have vulnerabilities, it's OK that it doesn't have all the new features of Firefox 35. It's what I need. It won't be used to browse the internet and go to dangerous web sites that might implant malicious code. It will only be used to connect to a specific web server, behind a corporate firewall, that my company tightly controls. I'm pretty sure doesn't have malware on it (if it does, I have much bigger problems that using an old version of a browser) . Then in a few weeks time, this VM will be deleted, along with the old version of Firefox I hope to have running on it.
Incidentally, I may also have to repeat whatever I'm doing here later on another CentOS VM to install Firefox 27, 26, 25... but I'm hoping I don't have to... but I assume that whatever procedure works for Firefox 28 will work for these other slightly older versions too... don't worry, I don't have to go all the way back to Firefox 1.0... it's not THAT bad :-)
So, with the understanding very clear that normally you would probably recommend just using the latest version.... can anyone help me ?
Thanks in advance.

Firefox tarballs from Mozilla Org use prefs within Firefox for updates. The "toggle" for not automatically updating - '''app.update.enabled''' and where to look for updates - '''app.update.url'''. The first needs to be '''''false''''' and the second could be a '''''null''''' string, do an update can't be found.
''I use both prefs to keep Firefox from updating by itself. I install each new version of Firefox as it is released, and keep the older versions around for reference purposes. Those prefs are the same since Firefox 1.5 came out.''
The versions of Firefox that are part of an operating system installation usually are that OS's own build of Firefox, and don't use the same update setup as Mozilla uses, in most cases. I am not familiar with Cent OS, but Ubuntu and Debian look for Firefox updates and from their own program repository servers outside of Firefox - as with the tarballs from Mozilla.

Bug Report for files first opened in Bridge and then worked in Photoshop

I encountered a problem with files first opened in Bridge and then worked in Photoshop as follows:
1. I opened a raw file in Bridge and then after corrections sent to Photoshop with no problem, however, after correcting and saving the file I then went back to the option of closing file and going to bridge. It closes file and stays in Photoshop. In order to get back to bridge I must either click on the bridge logo at bottom of screen or request to go to bridge.
2. I tested the same thing in CS-5 and it works like it is suppose to you click on close and go to bridge and it immediately takes you back to bridge.
3. Unless this is a new feature or suppose to work this way then it is a bug.
NancyZ

Hi Curt
Yes, I am talking about opening a file in bridge doing necessary corrections etc and then sending on to Photoshop. Once I do necessary corretions and save in Photoshop my next step would be to select close and open in bridge which is a choice. In previous Photoshops that I have used (CS4 and CS5) when you did this it would close the file and then immediately take you back to bridge. Now under CS6 if you select close and go to bridge it closes the file but remains in Photoshop. If bridge is not a choice when you select close and open in bridge why even have that as a choice? Why not just select close and then click on bridge logo or Control Alt O or select go to bridge?
Nancy

My MacBook Air has problems connecting to a saved network when I first open it.

My MacBook Air has problems connecting to a saved network when I first open it. When it idles, the connection gets lost and even clicking on the network won't connect it. Then I have to turn off wireless and turn it back on for it to connect. My boyfriend's MacBook Pro does not have this same problem and this problem started maybe 2 months ago and nothing about our internet or router has changed, and its only my computer having the problem. Its a 2013 MacBook Air and my softward is: OS X 10.9.1 (13B42). Please help!

Hello, nheredia05.
Thank you for visiting Apple Support Communities.
There are a couple steps that I could recommend trying. Power cycle the router and test to see if the behavior persists. Next, try an remove this prefered network from your list and then add it back again. Make sure all firmware updates have been processed on the router side and the settings have been optimized for performance. If the issue still persists try the steps in the second article.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
About Wireless Diagnostics
http://support.apple.com/kb/HT5606
Cheers,
Jason H.

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

This can also be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore

Takes a long time to connect to the internet when I first open an app

I bought my Macbook Pro Retina 13inch last weekend and I love it! Everything was working fine but over the last couple of days, when I first open an app, for example Safari, Google Chrome, iTunes, App Store, anything that requires an internet connection, it takes a long time to load up that first time, but after the first page has been loaded it works again fine until closing the app and re-opening it. When loading the App Store or iTunes it has even said an internet connection is required, even though my connection is fine and the other apps are still loading ok.
I first thought it was my WIFI connection but I have checked my router and everything seems fine, also my iPad and iPhone are still working fine with the internet.
Has anyone else had the same problem or can offer me a solution?

I am getting the same issue, on first starting safari the first page takes an age to load.. once it has everything is fine.
I have tried the 'Reset Safari' function but no difference. This only happens on my Macbook Pro Retina, Using safari on my iphone or ipad is fine. (I connect via ethernet too so its not a wifi problem.)
Any one got an answer to this yet?

Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset pref

Need help. I am running a 27 in imac with 16 gigs of ram. Photoshop runs really fast, except when opening files. It takes 5-10 minutes to open even a small file of 1 meg. I cleaned and validated all the fonts and removed all questionable fonts. Reset preferences and still have problem. Slow to open and in force quit "Photoshop not responding" At this point should I uninstall and start over.

What are the performance Preferences?

When i first opened my itunes acct. i was sharing with my daughter. she has gotten her own acct. now and we cannot remember the password to the old one. it will not let me sign in with my birth date and my email address is no longer the one on file help

When I first opened my itunes acct. i was sharing with my daughter. some time ago she got her own acct. i thought i should get my own too. so for the last several years i used my new acct. i reciently wanted to add some new cds to my ipod and it said that some of the songs that i purchased were no longer there. and were associated with a different acct. so i tried to log in to my old acct. but it asked for my birthday and the one i entered didnt match the records, and i no longer have the email address from the old acct to email me so i can reset the password. i have well over 100 songs that i purchased back then and i cant believe i cant get them back!! someone please help me. i love my music and i really want my other songs back.

Contact AppleCare at 800.694.7466, and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
HTH

How do I import an existing cell number to SAMSUNG GUSTO 3 - Verizon Prepaid? What number do I call? Do I activate first and then request the import via the new Verizon (not wanted cell number)?

The enclosed ACTIVATION & USE MANUAL is very limited. It only tells you how to activate the phone after inputting a zip code. On the web there are many contact numbers for customer service but ALL REQUIRE a Verizon cell number.

A friend I know had this issue and was told to activate the phone first and then call *611. You also can dial from any other phone this number 1 888 294 6804 and choose 1. They both can handle the tranfer without any problem.

I get the following error everytime I download something from the internet:-"/Users/vinaypunjabi/Downloads/Ontario Colleges Chart(2)(1).pdf could not be opened, because an unknown error occurred. Try saving to disk first and then opening the file".

I get the following error everytime I download something from the internet:-"/Users/vinaypunjabi/Downloads/Ontario Colleges Chart(2)(1).pdf could not be opened, because an unknown error occurred. Try saving to disk first and then opening the file".
Then it shows as downloading failed.But if I click on it twice ,it opens up .
this has started happening since last week.Before this ,it never happened.
Please suggest what has gone wrong somewhere and how can I rectify it.

Please install the following add-on to see if it helps.
https://addons.mozilla.org/en-US/firefox/addon/pdfjs/

I want to reload original software in IMAC G4 - i have original disks, can i install OSX first and then load "software restore 1 to 6" and not load OS9

I just purchased a used IMAC G4, cpu G4(1.1), powermac 4,2, 800MHz 15 inch FP and 55 Gig hard drive. I now have 750 k memory and it is working fine. i want to reload the original software. i have all original disks -CDs. These include OSX Install; OS9 Install; Software Restore 1 to 6 CDs; Imac applications.
Question, please, is which CD do i load first? Also i hope it is not necessary to load OS9. I would think OSX install first and then the software restore disks and then the imac applications?
Thanks.
Robert.

Boot from the disc labeled Disc One. Follow instructions and when you get to the part to select a Destination/Target drive click once on the drive then click on the Options button. Select the option for Erase and Install then click on the OK button and proceed.
You do not have to install OS 9. If you don't then you simply cannot use the OS X Classic emulator.
I believe there is a separate installer on Disc One for restoring pre-bundled software.

CS 5.5 test is fast on first open, then sluggish after

Similar Messages

Maybe you are looking for