CS 5.5 Update Issues (Mac)
I've been stuck on Dreamwever CS 5.5 Build 5366 (v 11.5.1.5366) for well over a year now and none of my other CS products (Photoshop, Flash Builder, Fireworks, Illustrator, etc.) have been updating. It seems that when the updater updated itself (currently Adobe Application Manager is v 7.0.0.233), there have been no updates. The only updates I am getting from Adobe are for Acrobat, which I think has it's own seperate updater?
It cannot be possible that there were only 2-3 version pushes from the CS 5.5 launch. Just not possible. There are too many patches that have needed to happen since the launch. I refuse to go to CC and just want my CS 5.5 to work properly and update itself with any of the patches out there.
Can anyone assist? I have also tried to find a phone number to call for Adobe support, but apparently they have taken those down?
Much thanks in advance,
Dan
Latest version for PS CS5.5 is 12.1.1.
Here is the download link for the same: http://helpx.adobe.com/photoshop/kb/security-update-photoshop.html
This was released somewhere in May 2012. NO PS CS5.5 updates were released after that.
-Pragya
Similar Messages
-
Can not instal Mac Osx 10:7:5 update due to. The volume does not meet the requirements for this update. Help
Copy these commands into TextEdit, replace the bracketed part with your username and the quoted parts with the ext HD's name, retaining the quotes.
sudo chflags 0 /Volumes/"name of ext HD"
sudo chmod a+rx /Volumes/"name of ext HD"
sudo chown -R <your username w/o brackets>:admin /Volumes/"name of ext HD"
Launch the Terminal app in /Applications/Utilities, copy and paste the first one into the window that pops up, and hit the return key. When the Password: prompt pops up, carefully type in your admin password, since nothing shows on the screen, and hit the return key. Copy & paste the other two, one at a time, following each with hitting the return key. You won't get the password prompt, since the initial one's good for five minutes.
Quit the Terminal app and you should be able to read and write to the ext HD. This assumes there's no OS or Time Machine backup on the HD. If there is, don't run the third command. -
Hi,
My Adobe CS 4 ran perfectly find up until I updated my MAC OS from Mavericks to the new YOSIMITE. When I launch illustrator CS4 I get a window message the reads "some plug-ins in the additional Plug-ins folder are conflicting with application or user plug-ins. It will skip loading plug-ins from additional plug-ins folder." there is a OK button that I must click on to close the message window and then illustrator will continue loading process, then a second window will appear reading "Error loading plug-ins. PhotoshopImport.aip" there is a OK button that I must click on to close the message window and then illustrator will continue loading and launch.
The problem is when I open a current file that has a psd link I will get a window message reading "could not find a plug-in to read the link file _______ choose repair to locate the missing file, replace to select another file, or ignore to leave the link unchange." When selecting a psd link /file it is greyed out which I cannot select it. I can not select, choose, import or open any files/links that is a psd.
Would someone please help me resolve this issue please!!!I have the same issue! Did you get a solution yet?
-
The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
Any help would be apprecated.By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.
-
After updating my mac book pro to the osx yosemite.am getting some issues after starting up.as soon as it gets on the destop the screen start blinking and i cant do anything.Please help me!
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I cannot update apps from the mac app store: it says I must sign into the account I used to purchase they app, and I am, and I have no other account. What's wrong?
Try resetting your Apple ID. Apple - My Apple ID
If that doesn't help, install the v10.6.7 combo update. Mac OS X v10.6.7 Update Combo
Restart your Mac after the combo is installed. Launch the MAS then try updating apps.
It's ok to install the combo if you already have v10.6.7 installed. It includes bugs fixes that may help.
Still have problems...
Contact iTunes Billing:
Apple - Support - iTunes
Click: iTunes Store Account & Billing / Billing Inquiries / Email Us -
The eyedropper tool for selecting colors to key out or to fill text will not work inside premiere pro, this error started when I updated my mac os to yosemite.
Hi Transportation,
Does the error occur in OS X 10.9? If not, why not remain at OS X 10.9? Is it necessary to run OS X 10.10?
The general rule of thumb is that when you are running software that is no longer tested or supported on a new operating system, you have to prepare for anomalies like this. You may want to install a separate bootable hard drive with OS X 10.9 on it so you can continue running that software more reliably.
Hope that helps,
Kevin -
Mac oc 10 combined update issues
I have updated my software to snow leopard, then checked for update, but when I update the Mac OS 10 combined my computer freaks out
Is your data backed up?
How full is your hard drive and how big is it?
Did you repair permissions?
Define freaked out. Does it ask you to restart with four languages? Does audio not play on all applications?
Do some applications just quit before even opening? -
Camera Raw 6.7 Update for Mac OS 10.10: Installation Failed error message.
Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?
thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again. -
Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
DaveHi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave -
Latest Firmware Update Issues with Screen Sensitivity
Hi All,
I synced my original iphone a few days ago and it required a firmware update. Since then, I have had numerous problems with the touchscreen for email and texting. Sometimes, I cannot open a folder on one of my emails or send a text because hitting the "send" icon does nothing. I've restarted my phone and reset it but have not yet tried a restore. Had anyone else had these issues?
And do you have any other suggestions I should try before doing a restore? Many thanks.
KathyDo not know about its compatibility and functionality.. but if you are OK with Beta softwares.. you may have a look at..
http://betalabs.nokia.com/blog/2011/03/16/nokia-software-updater-for-mac-available-in-beta?restsso_p... -
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?
It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0 -
I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510 printer) from Excel or Word. When I click on the Print menu item in Excel, there is a flash in the background like it is trying to open the print window, but nothing else. I am able to print from other programs like TextEdit, Mail or KakeidaGraph. As far as I know I have the latest Epson print driver.
Also, I am also unable to open an existing Excel or Word file from the open menu - both programs lock up and do not respond. I have to force quit. After I restart Excel or Word I can open an existing file by double clicking on the file, but if I again try to open another file from the open menu, Excel or Word lock up.
Any similar problems?Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
======================= -
Is there a consensus on how to solve security update issues?
hi,
i'm writing to you from a PPC G4 (AGP graphics) that will self-destruct by the time i switch off and (attempt) to re-start tomorrow. i will then need to do a re-install, just to see if i have gotten any replies (grinds teeth to the root). it will probably be my 8 th re-install in the past month. i just can'st takes no mores, Cap'n
<exasperation>deep breath... each time i have done a clean install, zero-ed all data when erasing (7 times over, on this occasion), repaired permissions before and after each software update, and followed every advice i could find via google to pre-empt another "Error: underlying task reported failure on exit" and the inevitable hanging grey screen; i have earned nothing but another Disk Utility report of the same problem. my HD seems to be OK - Disk Utility and Disk Warrior both say it's "verified" by SMART (although i've read this could be no assurance...). it's 40 GB, nothing else installed but NetBarrier; nothing saved on it (just 3GB of OS).
i've searched this forum over the last weekend and come across a diverse range of methods in resolving software update issues. i have tried downloading the security update and safari 3.2 directly from the site and bypassing Software Update- to no avail (but noticed that they are quite larger in MB than via Software Update??).
the one suggestion the intrigued me was installing the update via Terminal. why would this be any different? the worst thing about this is that there is no universal way that'll work for all, just individual solutions for different macs??? could my problem be exacerbated by using the double layer (double the permissions to fix?) of a Panther OS with Tiger Upgrade disk?
when i last tried to resolve the "error" with safe mode, fsck and DU Repair Disk/Permissions, which initially failed, i resorted to Disk Warrior, which re-built the directory, and "fixed" the HD. when i re-tried fsck it said the HD was "ok", but i still had the "error: underlying task..." on DU?
is there an issue with the Security Update oo8 because it's PRIMARILY for 10.5 and not Tiger? why have some encountered this problem and others escaped any seeming conflicts ? is this problem also caused by JAVA updates (there are, after all, 4 updates!)
more importantly, WHAT CAN I DOOOOOOOO?
thank youlooking at your suggestion to check /Library/Startup items in the concurrent thread ("Help needed after installing Security Update 2008-008"), i recalled that the only thing i have in this file system is 3 folders concerning Intego, NetBarrier and Virus Barrier. one of these contains the NetBarrier x4 daemon which has no image, just the apple "pencil, ruler, pen on paper" "A" image. i don't think it correctly downloaded, but this the case in every instance.
i'm running netbarrier x4 10.4.5 updated and downloaded on installation. intego Support says that there should be nothing in my "Startup/Login items". i thought they meant Login items (users>login items) because when i take the folders out of my "/Library/Startup items", NetBarrier fails to "initialize".
intego is now on newtbarrier x5, but they say x4 is fully compatible with Tiger???
my baby maybe getting on, but it's strong enough, i just need to know what's bugging it! -
My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): 7302300GANE
Hardware UUID: B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State: EnabledEDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!
Maybe you are looking for
-
20" Apple Cinema Display - Dim Backlight Fixed! (Sorta)
Well... as many other Apple Cinema Display owners have experienced the infamous dim backlight with the "short short long blink" - I have some wierd news to report... Mine got fixed last night on total accident. Last night there was a huge storm in my
-
How to run JNI in VisualAge 3.5
hi, I can run my JNI in command (.java .h .dll .class), but i am failed when i put them in VisualAge 3.5 (professional). problems: 1. I am not sure where to put the .dll and .h files, i put them in the resouce. 2. i can NOT get the result in the Visu
-
Download CS5.5 Design Standard
Where do I find this download? Need a re-download for my new mac. Greetings
-
FileStream locks read & write access. How can I get around this?
I'm progressively downloading a video from a server using URLStream and FileStream classes to download and save the data to disk. While this is happening, I would also like to begin playback of the video so the user can progressively watch while this
-
i have a new MacMini {end of 2009} and just bought a 2TETRA Time Capsule. I am a bit confused as to which is the best way to set it up. these are what seem to be my options: to plug the Wan cable directly into my router from the TC and then wirelessl