CS 6 and Cineform/Go Pro functional together?

Current degree of Cineform and Prem Pro CS 6.02 functionality?
Gents:
I have both Neoscene 5.6.2 installed and a trial version of Studio Professional.
Recently upgraded to CS 6.02 and found 2 major problems with the above.
I refer to the main program console and not Firstlight ( Cineform files only) or HD Link.
1) I own multiple Canon A1 and A1s HDV cams whose output/format is MPEG-2 which yields .files with the .m2t extension.
At present, in my case, although you can see the files in their original folders when attempting to import new files, when you select open nothing happens. Nothing is displayed in the main Go Pro Cineform Studio window!
2) As an editor, I heavily rely on Cineforms video filters which can be found in the Efx panel in Premiere Pro. Examples include the color corrector.
Until CS 5.5, in my experience they worked perfectly however in CS 6.0+ they fail to do anything. It's very easy, quick and convenient to color correct a clip while its right on the timeline. Takes a few seconds. I utilize this resource often.
I mystified if its just me and what others experience has been.
Can you use Cineforms editing tools as intended and has been done historically up to now in Premiere Pro 6? if not is there a fix or update in progress?
Any ideas on how to rescue my situation?
Any input, suggestions and input welcome.
Thanks.

I am pursuing that path which has not proved to be usefull or informative yet.
I was hoping to learn from actual end user experience.
Thanks

Similar Messages

  • Quick Time 7 and Quick Time Pro Functionality Issue

    I purchased Quick Time Pro a few years ago when Quick Time was another version. Quick Time is needed for Premiere Elements. With the current  Quick Time 7 comes an issue: my Quick Time Pro will not function in Quick Time 7 because the Quick Time Pro I only functions in earlier Quick Time versions. I either have to purchase a new Quick Time Pro product key to run in Quick Time 7 or run an earlier version of Quick Time to have my current Quick Time Pro function properly. Does anyone else have this issue?

    I have not. Historically, the Pro unlock will work for all versions in a series, i.e. Pro version 6 will work in all versions in the 6 series. I got my Pro version 7 at about 7.2.x, and it has worked fine with all through version 7.5.5, where I am now. The current version is 7.6.6, and I have heard of no issues with a Pro version 7 unlock not working in any versions later than my 7.5.5.
    Seems strange, but then maybe Apple has departed from history?
    Good luck,
    Hunt

  • Problem with Premiere CC and Cineform (Go Pro)

    My Premiere CC was running without any problems unless I installed the GoPro Studio Software 2.0.0.285. After this the timline apears very slow and don't react anymore. I can not move the cursor and the timeline is frozen.
    I uninstalled the GoPro Software, removed every entry in the registry, uninstalled Premiere and reinstalled it. But the problem still exists.
    Any idea what I can do to avoid a complete new installation of Windows? I use Win 8.1 without any problems on CC until now.

    This is an issue with GoPro Studio's latest installer. We'll be fixing it in the next release of GoPro Studio. in the meantime, you can resolve it by removing the CineForm entries in tthe following folder:
    c:\program files\adobe\adboe premiere pro cc\settings\badgeicons\
    Jake Segraves
    Technical Support Manager
    GoPro

  • AWN, XFCE and skype not all functioning together well

    I switched to xfce and Im using awn instead of a panel. I installed the extras so I could get the notification addon.
    When someone calls me on skype it never shows up in the tray area so I end up having to call everyone back after they hangup.
    Using kde the notification show up just fine.
    I killed the xfce panel from processes when I switched to awn so there should be no notifier trying to steal the message and just not show it.
    any ideas? I tried googling but not much luck.

    Open Windows Event Viewer -> Custom Views -> Administrative Events. Look for the recent error messages with timestamp corresponding to Skype crash. Copy and paste here the text from the General tab.

  • Purchased an HP Photosmart 5520 all in one printer last year and a Macbook Pro in Jan. They worked together up to June. In Sept. when I tried to print wirelessly, it would not print. The laptop had been updated. Tried to update the printer via HP,couldn't

    I have an HP Photosmart 5520 all in one printer and a MacBook Pro. Bought the MacBook Pro in Jan 2013 and the printer in Dec 2012. I was able to print to the wireless printer up until June 2013. In September, when I tried to use them together, I could not print. During the period between June and Sept., my laptop software was updated. I have tried to update the HP software on my laptop, but could not. What can I do to use this printer with my MacBook Pro? Please help!

    The MacBook Pro is running at least 10.7.

  • I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

    I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

    Good work, thanks for the report.

  • G3Ti200 Pro-VT and Pinnacle PCTV-Pro Cannot live together

    From the moment I instal in one of my free PCIs the Pinnacle PCTV-Pro card, the MSI Clock, the MSI Information, Live update 3 (vbios.dll could not install..) etc do not work. A nessage in the start up of Windows XP presented saying .. exception error ...nvclock.dll,FnNvclock".
    When I extract the PCTV card from my PC everything work OK.
    Can anyone inform me if MSI VGA Card (MS-8850) and Pinnacle PCTV can live together ?
    Stavros   ;(

    Here a list from windows XP system information
    IRQ 0      System timer   OK
    IRQ 1      Easy Internet Keyboard   OK
    IRQ 3      Communications Port (COM2)   OK
    IRQ 4      Communications Port (COM1)   OK
    IRQ 6      Standard floppy disk controller   OK
    IRQ 8      System CMOS/real time clock   OK
    IRQ 9        Microsoft ACPI-Compliant System   OK
    IRQ 13    Numeric data processor   OK
    IRQ 14      Primary IDE Channel   OK
    IRQ 15      Secondary IDE Channel   OK
    IRQ 16      NVIDIA GeForce3 Ti 200   OK
    IRQ 16      Standard Universal PCI to USB Host Controller   OK
    IRQ 18      Standard Universal PCI to USB Host Controller   OK
    IRQ 19      Standard Universal PCI to USB Host Controller   OK
    IRQ 21      CMI8738/C3DX PCI Audio Device   OK
    IRQ 22      VIA OHCI Compliant IEEE 1394 Host Controller   OK
    IRQ 23      Intel PCI to USB Enhanced Host Controller   OK
    IRQ 23      Pinnacle WDM PCTV Video Capture   OK
    IRQ 23      Pinnacle WDM PCTV Audio Capture   OK
    Do you see any conflict? system says everything OK
    Thank you for your interest
    Stavros

  • Hello and good day, can someone share me here in the Forum may, if they found a Adobe can put together package? Basically, I need only Photoshop and Adobe Premiere Pro! About a response I'd like Very much. Thank you very much and greetings Ralf PS. Accord

    Hello and good day,
    can someone share me here in the Forum may, if they found a Adobe can put together package? Basically, I need only Photoshop and Adobe Premiere Pro! About a response I'd like Very much. Thank you very much and greetings
    Ralf
    PS. According to Adobe, this should determine a Adobe ID be possible!

    You may buy two individual subscriptions
    Cloud Plans https://creative.adobe.com/plans
    -and subscription terms http://www.adobe.com/misc/subscription_terms.html

  • Anyone got Pro Tools 8 and Logic 8 to sync together?

    Hi all - I have read the forums over at DUC (digidesign) regarding syncing Logic and PT via IAC on the same machine and via Network Midi or via midi ports on a 003. I have been unable to slave Logic to Protools 8 both on the same machine (using IAC) or running Logic 8 from a laptop connected via Network Midi, or via the midi ports on a 003.
    The threads on this (working) seem to reflect the use of Pro tools 7.4.2 and earlier, not Pro Tools 8. I am looking for any user who has managed to get Pro Tools 8 and Logic 8 to sync together (either on separate machines, or the same machine). If so, I would appreciate a step by step on what you have done to achieve sync between the two programs, since I have now exhausted all of the solutions posted over at DUC.
    I am running PT8 LE with a 003 on a MacPro Quad, and Logic 8 on a Macbook Pro. Thanks in advance.

    Ok after more testing I have managed to get this working using a direct midi connection between the 003 and the laptop (using a Edirol UM1 and the 003). Here is what I did.
    ProTools8LE as master running on MacPro:
    1. Setup->Session
    1a. Set the session start time to 00:00:00:00
    1b. Time code rate =25
    2. Setup->Peripherals
    2a. Synchronization - MTC reader Port: Digi 003, Port 1
    MTC Generator Port: Digi 003, Port 1
    3. Set session tempo (eg: 120bpm)
    4. Transport- hit the arrow on the right hand side of the transport window and select "Synchronization" then hit the GEN MTC button
    LOGIC slave running on Laptop.
    1. Connect MIDI i/o interface to ports on 003
    2. Set session tempo to match that in PT (120bpm)
    3. Settings->Synchronization
    Sync mode = MTC
    Auto Enable External Sync = yes
    Frame Rate = 25 (same as protools)
    Auto detect format of MTC = yes
    Bar position 1111 plays at SMPTE 00:00:00:00 (this matches the setting in PT)
    Thats it. This setup appears to be working on my rig. I still haven't got this to work over Network midi, and I still haven't got PT8LE and Logic 8 to work together on the same machine. Let me know how you go.

  • Just bought a Mac but music on my MacBook Pro, iPhone and iPad which all sync together is not coming up on the new Mac - help please

    ust bought a Mac but music on my MacBook Pro, iPhone and iPad which all sync together is not coming up on the new Mac.  I think I have turned on iCloud but still nothing.

    It does not magically appear, unless iTunesMatch is turned on.
    Copy the media (the ENTIRE iTunes folder) from the old computer to the new computer

  • Microsoft word 2013 function home and end keys not working together on HP Envy X2

    Please help I've tried out Microsoft Office Word 2013 on two HP Envy X2 11.6" laptops/touch screen with keyboard and when I am in a Word document and am at the end or beginning of a document and select the FUNCTION KEY AND THE HOME OR END KEY, it does nothing. This is not the case in Internet Explorer or a web browser.  There is a problem with the HP keyboard and Office 2013 or maybe any Word app. Help me as I use documents alot and rely on this function heavily.  I can only page up or scroll up using the bar. It is not ideal.
    Astaastra

    Hi rosedoc12,
    I have done some research and I have found a document that will show you how to disable or lock the fn key.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c02035108
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Lightroom 5 and Google Earth-Pro?  How to make them work together in Lightroom???

    Please help me: I have a Mac, Lightroom 5 and Google Earth-Pro. Is there any possibility to change the ****** Lightroom-Maps to Google Pro Maps???? Would be great. Thanks for answering in advance!

    Thank you anyway!!
    Let's wait for a cooperation of both of them!...... or at least for a little improvement of the Lightroom-Map

  • Ago and To Date Functions together

    Hi here is my requirement, i wanted to create a column which captures previous year's Period to date.
    Period To Date gives value from 1st of this Period to today's date for present year 2012, but i want to capture the values from starting date of Period to today's date but for previous year 2011.
    If for example : Period 1 of 2012, prior period would be Period 1 of 2011
    I am assuming this logic will work,
    First i will capture Period To Date by using (To date function), and then use AGO function where Time Offset = Period and Number of Periods = 12.
    Please find the below function i used.
    Ago( ToDate("Core"."Fact - Sales - Invoice Line"."Net Invoiced Amount" , "Core"."Date"."Enterprise Period" ), "Core"."Date"."Enterprise Period" , 12) .
    But i found few inconsistency in the data, so kindly please help me in this.

    Try this.
    Instead of using 2 time series functions in one columns create separate columns
    ex:
    1. Create Prior YTD as :ToDate("Core"."Fact - Sales - Invoice Line"."Net Invoiced Amount" , "Core"."Date"."Enterprise Period" )
    2. Now create Ago column as : Ago (Prior YTD, "Core"."Date"."Enterprise Period" , 12)
    HTH

  • HT3678 i did all this and it changed to the Pro symbol yet i still cant do any of the pro functions please help

    Please help! i cant do any of the QuickTime player 7 pro functions yet it accepted my registration

    Edit: ive even tried resyncing it.

  • Software Conflict between HP G4050 scanner and HP Officejet Pro L7700 all-in-one

    I have a Sony Vaio pc, OS Windows 7 HmEd 64-bit (updated), using Norton 360 (updated).
    My pc and a Mac are both connected wirelessly to the Officejet Pro L7700.  My pc is connected to the G4050 with a USB cable, as the G4050 does not have wireless capability.
    The conflict is: (I initially had L7700 installed on my pc, and all was well) After installing the G4050, all worked for a while, then I go to print/scan, and receive error message that neither machine can be found, (though both are installed).  So, will uninstall and reinstall one or both machines.  It works fine for a while then, then same thing.  I've uninstalled and reinstalled 5 times in a year.  There is a conflict with the sofware of the 2 machines.  All other software on my computer works fine, and if I'm using only one of the HP products all works fine - the conflict is the software for these 2 HP products TOGETHER.
    1. Is it possible to successfully use both of these machines installed on a pc?  
    2. Do I need a patch, or how can I make this work? 
    Currently, I just have the L7700 installed and working great, but very soon I need to (again) install the portable G4050 to scan negatives and prints.  
    Please help!  I love HP products.  How can I get these 2 to work together?  If not, what else can I do?
    Thank you in advance for a prompt response. 

    Hi , Welcome to the HP Forums! I see that you cannot get your HP Officejet Pro 8600, and HP Officejet Pro 6600 printers to work on Windows 10. And, I am happy to help!  According to this guide, Windows 10 Compatible Printers, both printers are compatible with Windows 10.  So we will need to do some troubleshooting steps in order to get them to work.  Some questions for you:  To verify both printers hardware is functioning standalone, are you able to make copies using the scanner glass? Copying a Multipage Original.Do you see any error messages on the computer screen or any of the printers display screens? In the meantime, please try the HP Print and Scan Doctor, and post the results! Hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

Maybe you are looking for