CS 6 and win7 upgrade from HP to Pro

is there any danger that my licence will be corrupted or invalid after upgrade with anytime upgrade from Win 7HP to Win7Pro?
or rather deactivate CS6 and after upgrading reactivate it again?

Deactivate before changing the system and reactivate after the system is restored and the software is reinstalled.

Similar Messages

  • Dv4-1428dx with win7 upgrade from Vista. No internal spkr audio.

    dv4-1428dx with win7 upgrade from Vista. No internal spkr audio.
    Headset audio is OK.
    Speaker icon in system tray shows red "x" (no connection) unless headset is plugged in.
    Device Manager only shows two "High Definition Audio Device(s)", nothing else.
    This question was solved.
    View Solution.

    Hi:
    Try installing the Vista driver from your notebook's support and driver page and see if that fixes the issue.
    Paul

  • I am new to mac's and have upgrade from Snow Leopard to Lion but......

    I am new to mac's and have upgrade from Snow Leopard to Lion but not all my application will work. Is it save to reinstall using original snow leopard dvd and does it wipe all my other application like apature? I am in a panic over this, any help!!
    I came across this online and i want to know is it safe to do this:
    Backup your User folders to an external drive. This should preserve your documents, photos, music, etc. If you store those things in locations not in the User folder, make sure to copy those over too.
    Insert the Snow Leopard disc. Restart your Mac and hold down C to boot to your DVD drive.
    Go to Utilities in the menu bar once the installer pops up and select “Disk Utility.”
    Find the drive in the sidebar where Lion is installed, select it and navigate to the Partition tab.
    Click on the drop down menu under Partition Layout and select “1 Partition.” Hit Apply.
    Now navigate to the Erase tab and make sure “Mac OS Extended (Journaled)” is selected, then hit Erase to delete all data on the drive.
    Quit Disk Utility to get back to the Snow Leopard installer and proceed with the install.
    Restore your User folder and documents from your backup.
    Run Software Update to get everything current, install your apps from your original install media and update those as well.
    if any one can help me that would be great, thanks Mike

    Before you do that why not do this first:
    Repair the Hard Drive and Permissions
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    To boot from the Recovery HD restart the computer. After the chime hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    If this doesn't help, then you can proceed to reinstall Snow Leopard as follows:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    This will erase the drive so be sure to backup your files before doing this.

  • When upgrading from Abobe Acrobat Pro 9 to XI, is it possible to save Headers and Footers in documents?

    I support a law firm that users headers and footers in their documents.  They are upgrading from Adobe Acrobat Pro 9 to XI.  when they did an install on one PC, the headers and footers in a PDF did not show and had to be recreated.  Is there a way around that?  I's appreciate any input.
    Thanks!
    Ed

    This is a work around. Bring the pdf into Illustrator. Go to Select >Object>Text.  In the attributes panel, deselect Overprint. In the Transparency panel, select Knockout Group. In the Appearance panel, check to make sure the black is not overprinting by clicking on the Character entry. If not, try clicking "Clear Appearance" (here I got a little lost.
    Resave the pdf file. Your black text should now knock out. You may have to retrap, unless your RIP does that for you.
    Hope this helps. (I had to keep trying to get it to work, but I finally did.
    Greg Ledger
    www.macproductionartist.wordpress.com

  • R/3 upgrade from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0

    Is there a reason to upgrade Solution Manager from 3.2 to 4.0 when upgrading R/3 from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0?
    And when in current situation Unicode UTF8 is used, could that give problems during / after the upgrade?

    Hello ALex,
    There is not a must to upgrade also your solman 3.2 when you upgrade your satellites, only consider if you need the solman diagnostic or not and also that the new functionality in solman 4.0.
    Which system is unicode, the satellite?
    There is also not problems having a non-unicode solman with unicode satellites and the other, having a unicode-solman "linked" to unicode-satellites.
    Hope this helps,
    Dolores

  • Upgrad from Windows 8 Pro on Windows 8.1 Pro with Media Center!

    Hello,
    I did upgrade from Windows 8 Pro on Windows 8.1 Pro with Media Center. Now the problem is when I press on any file with the right mouse button is normally open curtain menu, but when I press on any folder, right-click, the system crashes after a few seconds
    and back up.
    Best regards!

    Hi,
    Go Start>Control Panel>Administrative Tools>Event Viewer and scroll through the logs for System and Applications to see if anything shows up in red as Error or Warning.
    Meanwhile, going to HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers
    in regedit.exe, backing up the whole ConxtentMenuHandlers folder, and then start deleting all of them one by one and continuously testing the right click.  Of course import the Context folder after you find it, test once again by right clicking
    to make sure you found the problem, and delete the file that caused the problem.
    Karen Hu
    TechNet Community Support

  • T410 Windows 7 Upgrade - from Win 7 Pro 32 to Win 7 Ultimate 64.

    I purchased a T410 with Win 7 Pro 32 and am looking for the option to upgrade it to Win 7 Ultimate 64.
    The shop in the country (Singapore) do not provide such option/customization.
    Called tech support in the country without getting much info (they said they only support hardware). 
    Tried Lenovo shop in the country and they will only help to upgrade to Pro 64 with a charge, however without any recovery media (OS and drivers).  I need Ultimate 64.
    Browsed Lenovo site and couldn't find anything relevant.
    Hope someone will give me the direction to upgrade from Win 7 Pro 32 to Win 7 Ultimate 64 (with all drivers).
    - Hong
    moderator edit: subject line adjusted for clarity

    Dear Yannick Plavonil,
    That discussion was started by me only on dell community and it was not resolved. 
    However if I upgrade can I revert back to Win 7, if something does not resolve or some of the devices
    connected to the motherboard do not work?
    Regards,
    Ravi

  • Unable to find a Re-Seller willing to sell me an Upgrade from Acrobat 9-Pro to XI. Live in Puerto Rico. Cannot buy through the Adobe Website. Locally identified Re-Seller unable/unwilling to provide me with the advertised Upgrade. My Options are; please?

    Unable to find a Re-Seller willing to sell me an Upgrade from Acrobat 9-Pro to XI. Live in Puerto Rico. Cannot buy through the Adobe Website. Locally identified Re-Seller unable/unwilling to provide me with the advertised Upgrade. My Options are; please?

    Reason I had to chat with Customer Support is that I got the following message upon placing Upgrade Order.
    What Different Country? It's the US. The ONLY placed I've lived my entire life! Apparently some software changes were made to the site and the PR Territory fell in a no-man's land.

  • How can I upgrade from Final Cut Pro X 10.0.4  to 10.0.7

    I need to upgrade from Final Cut Pro X 10.0.4 to 10.0.7 but can not find how to do this. Can anybody help?
    Thanks.

         You might do some web searching on "FCPx  torrent ".  I would think that if you have a legitimate copy of FCPx there would be no legal/moral issue with pulling down a 10.0.7 version via bittorrent, but I'm not a lawyer. And of course there are other issues relating to such software but as Tom implies, you can't get an older version from Apple so you'll have to find somebody, somewhere with a 10.0.7 copy that you can install.

  • Can you upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with upgrade?

    Does anyone know if you can upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with $699 upgrade?
    I purchased Final Cut Pro 2 years back and then purchased the Final Cut Pro 3 upgrade. I have not used it in years, but now I want to upgrade to Final Cut Studio 2. Is this possible by just purchasing the upgrade?

    Apple's web page has the requirements:
    http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearnMo re=MA886Z/A
    The $699.00 upgrade version requires a valid serial number from a commercial version of Final Cut Studio, Production Suite, or Final Cut Pro 1, 2, 3, 4, or 5. Academic and not-for-resale versions are not eligible for this upgrade.

  • How do I upgrade from Final Cut Pro 4.0 to 4.5

    How do I upgrade from Final Cut Pro 4.0 to 4.5?
    Please Help
    Leo

    Hi
    I got sorted apparently I had a recipt for the orignal 4.5 upgrade and this prevented the software updater looking for Final Cut Pro 4.5
    solution: I opened Library and went to Receipts and found FinalCutProHD4.5.Pkg I deleted this then I went to software update and bingo problem solved?
    thanks anyway
    Leo

  • I originally bought Acrobat 9 and later upgraded to Acrobat 10 pro. My computer crashed and I am trying to re-install Acrobat 10 pro. I have serial numbers for Acrobat 9 and an Acrobat 10 pro upgrade. What do I do?u

    I originally bought Acrobat 9 and later upgraded to Acrobat 10 pro. My computer crashed and I am trying to re-install Acrobat 10 pro. I have serial numbers for Acrobat 9 and an Acrobat 10 pro upgrade. What do I do?

    Hi Shane,
    Please download Acrobat X Pro from the link below.
    http://www.adobe.com/downloads/other-downloads.html
    Install the software and when prompted for the previous version qualifying product, select Acrobat 9 and enter the serial key of Acrobat 9.
    This should install and activate Acrobat X Pro on the machine.
    Regards,
    Anand

  • What are the benefits from upgrading from Acrobat 9 Pro Extended to Acrobat11 Pro?

    What are the benefits from upgrading from Acrobat 9 Pro Extended to Acrobat11 Pro?

    Acrobat is a program used by a wide variety of users for a even wider number of purposes. So if we simply gave you a feature list, that wouldn't be very helpful.
    Tell us how you use Acrobat, and what you do with it, and we can suggest improvements that were made in Acrobat X and XI Pro.

  • Why upgrade from Acrobat 9 Pro Extended to X or XI

    What are the benefits from upgrading from Acrobat 9 Pro Extended to Acrobat  10 or 11?

    You should ask this question in one of the Acrobat forums. The following is probably the most appropriate one: http://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs?view=discus sions
    It would be helpful to know the type of things you use Acrobat for. Some features have been enhanced significantly and some functionality you have with Acrobat 9 Extended has been removed.

  • Upgrade from Adobe Premiere Pro 1.5 to the latest version

    I purchased few years ago Adobe Premiere Pro 1.5 and enjoying it since.
    Recently I purchased a new camcorder outputing MP4 and AVCHD video formats which cannot be read by Adobe Premiere Pro 1.5.
    What are my options?
    Is there a path to upgrade from Adobe Premiere Pro 1.5 to a version which can read MP4 and AVCHD video formats?
    Philippe

    There are two solutions for you and neither of them offer any discount for already having version 1.5 since it was released over 10 years ago.
    You can atill purchase Premiere Pro CS6 (which will never, ever, be upgraded) and have it for a one time price, or, you can simply subscribe to the Creative Clould and get the latest and greatest Premiere Pro CC.
    To sign up for one product is $19.99 per month, and to sign up for all of them is $49.99 per month. That is just about every Adobe program from Premiere Pro, Audition, After Effects, Illustrator, InDesign, all the way through to Acrobat Pro.
    See here for a list of membership plans.

Maybe you are looking for

  • Problem with firewall and java on line sites internet explorer

    i have been experiencing problems with java on line games because the firewall has blocked usage.On two of them when i press play to play the game a message appears error on page.If i dowload mozilla will i have the same problems? also when downloadi

  • Disabling of Batch field in MIGO

    hi all,                  I added one tab in MIGO at item details. i created one program and designed one screen. here i am calculating batch code based upon screen fields and i updated batch field that is in different tab. Here i need to disable batc

  • Using checkboxes to set the category of a value, then add selected values

    Hi there, i'm using columns of checkboxes to set expense categories (Expense Type 1, Type2) once i set the type of expense that it is, i want the NET Value expenses of each category to be added to the bottom of the relevant Expense Type column. thank

  • Audio Synchronizing

    I've converted quite a few VHS tapes I own to DVDs without problems, but now when I send the VHS from my VCR through my analog/digital converter to iMovie they play well. Then try to make a DVD (through IMovie) using iDVD it seems to work fine. It ev

  • Viewing in landscape mode

    I am running FaceTime on a MacPro. Viewing seems to be locked in portrait mode. When I go to Video/Use Landscape (Command+R), it is grayed out. Do I have to be connected to someone for this to be active? I notice the Enter Full Screen option is graye