CS 6 frame, tools, and descriptions are very pixeled

Not all the time, but since I installed PS 6 on my new Mac Book Pro, the frame, tools and navigator are extremely pixeled... it looks like a file of 70 Kb is enlarged to 20x25 cm... Does anybody knows how to solve this problem?
(uploaded the latest version on last Tuesday, so I assume I'm up to date)
Thanks in advance!

thanks for your quick reply.
please find attached a screenshot with info about the camera and an image which does not show this „pixeled”
Op 24 jan. 2014, om 14:23 heeft c.pfaffenbichler <[email protected]> het volgende geschreven:
Re: CS 6 frame, tools, and descriptions are very pixeled
created by c.pfaffenbichler in Photoshop General Discussion - View the full discussion
Could you please post a screenshot to illustrate the issue (with the Insert Image-button (camera-icon) in the browser)?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6047943#6047943
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6047943#6047943
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6047943#6047943. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Similar Messages

Adobe acrobat tool bar, windows and icons are very big after latest update

im having a problem with the latest update of acrobat pro, the tool bar, windows and icons are very big after latest update. how to re size it???
https://www.dropbox.com/sh/pbd33n1q2wirpq3/AABHjSRXo-crpYGVLaOrB2FVa

Please check the doc : Hi DPI, Retina display support | Acrobat, Reader

Problem. Alla my tools and panels are hidden, can´t find them. Have try Windows menyer....... and checked. all is ok.

Problem. Alla my tools and panels are hidden, can´t find them. Have try Windows>menyer....... and checked. all is ok.

Press the Tab key, it shows/hides panels.
Or Window > Workspace > Reset or use a different workspace.
Gene

BPC 7.5: Node ID and description are not loading

Hi,
I'm working on BPC 7.5 and SP04.
I'm working on BPC 7.5 and SP04.
I have G/L account hierarchy in BI system. I tried to load G/L account master data attr/text into BPC and successfully loaded but hierarchy node ID's and description are missed. I followed the below steps.
1) Loaded master attr,text and hierarchy data from ECC to BI and activated the master data.
2) Used the below transformation and conversion file.
3) Selected the hierarchy in selecetion in data package while loading data into BPC.
Transformation File:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF = 177000
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=*MAPPING
*MAPPING
ID=ID
*CONVERSION
ID=ACCT_ID_MD.xls
G/L Account compounded to chart of accounts (10+4) and has total length 14 and hierarchy node ID's have length 32.
I used the below conversion file.
External Internal
01000000?????? ??????
0100000??????? ???????
010000???????? ????????
0000000000000000000000000000???? ????
000000000000000000000000000????? ?????
00000000000000000000000000?????? ??????
0000000000000000000000000??????? ???????
* js:%external%;
Please suggest anyone how can I load node ID's and description.
Note: I followed the same above process for 0PROFIT_CTR and 0COSTCETER and successfully loaded master, text and hierarchy data.
Thanks
Prasad

Hi,
Use the below code in CMOD and change the hierarchy name.
*& Include ZXRSAU04
CASE i_datasource.
Global Declaration *********
FIELD-SYMBOLS: <FOLDERT> TYPE ROSFOLDERT,
 <HIENODE> TYPE ROSHIENODE.
CONSTANTS : C_NODE VALUE 'C'.
**Enhancement will be used to suffix Z to all cost center hierarchy node
**This will be further used in BPC to load hierarchy without error.
WHEN '0COSTCENTER_0101_HIER'.
LOOP At C_T_HIENODE3 ASSIGNING <HIENODE>.
 IF <HIENODE>-IOBJNM = '0HIER_NODE'.
 CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
 ENDIF.
ENDLOOP.
LOOP At C_T_FOLDERT ASSIGNING <FOLDERT>.
IF <FOLDERT>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <FOLDERT>-NODENAME+4(20) into <FOLDERT>-NODENAME.
ENDIF.
ENDLOOP.
LOOP At C_T_HIENODE ASSIGNING <HIENODE>.
IF <HIENODE>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
ENDIF.
ENDLOOP.
********End Of Code
**Enhancement will be used to suffix Z to all profit center hierarchy node
**This will be further used in BPC to load hierarchy without error.
WHEN '0PROFIT_CTR_0106_HIER'.
LOOP At C_T_HIENODE3 ASSIGNING <HIENODE>.
 IF <HIENODE>-IOBJNM = '0HIER_NODE'.
 CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
 ENDIF.
ENDLOOP.
LOOP At C_T_FOLDERT ASSIGNING <FOLDERT>.
IF <FOLDERT>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <FOLDERT>-NODENAME+4(20) into <FOLDERT>-NODENAME.
ENDIF.
ENDLOOP.
LOOP At C_T_HIENODE ASSIGNING <HIENODE>.
IF <HIENODE>-IOBJNM = '0HIER_NODE'.
CONCATENATE 'Z' <HIENODE>-NODENAME+4(20) into <HIENODE>-NODENAME.
ENDIF.
ENDLOOP.
********End Of Code
ENDCASE.
Thanks
Prasad

Hello my name is amer and i live in iran and i have one iphone lock.but my country limited us very very.and we are very poor and dont can pay money to unlock my iphone.please help me.thank you very math.my s/n iphone is. 012652000197750.my email i

Hello my name is amer and i live in iran and i have one iphone lock.but my country limited us very very.and we are very poor and dont can pay money to unlock my iphone.please help me.thank you very math.my s/n iphone is: 012652000197750.my email iS: [email protected] please help me im very poor.im student and dont have money to keep on.

Only your cell service provider can unlock the phone. We cannot help you with that.
BTW, you should not provide information on your serial number or email address in an open forum.

Hi,some of my photos got delete when i made a new folder and these are very importont

hi,some of my photos got delete when i made a new folder and these are very importont

Copy them the correct way.
Close iTunes on both computers.
Copy the ENTIRE iTunes folder for the old computer to the new computer.
Open iTunes on the new computer. Everything in iTunes will be exactly as it was on the old computer.
FYI, marking your own additional comments as "This solved my question" is a good way to get the post ignored.

Ip5s's why I do not live screen and camera are very weak faint? please check for me seri17m800xffgc

ip5s's why I do not live screen and camera are very weak faint? please check for me seri17m800xffgc

Sorry, not quite accepted, I see that I missed something out...
This rapid flashing has only occured since I had BT Sport included in my package a few days back. Before then the light had been stable green with the occasional rapid flashing whilst I have been connected to the internet. That obviously does indicate data transfer.
However, when I was not connected to the internet, the light glowed a stable green all the time. Now it flashes rapidly even when I'm not connected - I'll add there that my BT Vision box remains on all the time.
Heat - The unit IS WARMER than it was - That may sound nit-picking but with my OCD's I "Touch-check" every item of electrical equipment every time I leave my house and, when I go to bed at night so I am very well used to "How warm something should be" so that in my mind, I "Feel Safe". At this time I don't "Feel Safe" with the increased temperature so have to switch it off overnight, or when I leave my house.
** The unit may of course be warmer due to extra data-transfer but then, why do I suddenly have extra, and constant data transfer when my computers are switched off and I'm not using the internet?
A thought about that I think could be that someone else is constantly accessing my connection though I've no idea how that could be so or if that ever could happen.

When I use the "snapshot tool" some images are very light. how can I adjust the brightness....

I have windows 7 and Acrobat X Pro.
When I use the snapshot tool I cannot figure out how to adjust the brightness on that image? On my old computer a picture tollbar would pop up. A lot of images are very light and I need to darken them.

My not be much you can do. However, I would just clip them into my favorite image tool (in my case IrfanView) and adjust there.

Epson R2400 prints from Apterture and CS2 are VERY close.

Using the same NEF file that Frank donated, I printed an untouched(cropping only) print from Aperture to my Epson R2400 on premium lustre paper.
I took the white balance temp(4906 K) and tint(-14) from the HUD and applied these into Bridge(temp/tint for the same NEF), with default values for everything else default(exposure:0, shadows:5, brightness:40, contrast:+25, saturation:0, sharpening:25), and color space sRGBIEC61955-1, then opened it in CS2 and printed it.
NOTE: I am using PowerRIP-X V7.2 from iProof Systems for my print driver, it is installed like a printer and shows up as a printer on the selection list. IMHO, the $200 I spent on the R2400 RIP was money well spent. Between the RIP and the calibrated monitor, my color matching from screen to print is dead on, regardless of the paper type.. no more wasted prints and frustration. They also sell a RIP for the Epson 4800.
The prints from both are very, very, close. I have been shooting digital since 1997 and therefore do not own a scanner, so this is my visual review. Although I might shoot em tomorrow with my D2X on a tripod while lighting with a 47" Octabox... we'll see.
The CS2 print has a very slight bit more saturation of the skin tones(reddish) than Aperture. The shirt in the Aperture print is a very slight bit darker than the CS2 print.
If you look very closely and angle the light just right you can see a slight bit of the earlier mentioned blocking in the shadow on the subjects left shoulder.
I suspect the slight darkening of the shirt color may be due to the same reason for the aforementioned blocking in the shadow areas.
There is no appreciable difference in print quality.
I calibrate my 20" Cinema Display with a Spyder2PRO device and these slight differences are seen on screen as well, therefore on hardware calibrated displays the following screen capture should represent the differences..(I have no idea what this will look like on a windoze monitor!)
To see this full res in Safari, right click and select 'Open Image in New Window'

There seems to be two issues here. For output, using
the same output profile, Aperture and Photoshop
should be pretty close however, keep in mind that
unless you set Photoshop to use the Apple CMM (not
ACE) there could be a tiny bit of difference.
Hmmm.
I'm trying to remember what Bruce Fraser said about CMM choice the last time I attended on of his lectures. If I have it correctly he had reservations about all of them but the Adobe CMM was the best of the lot.
This was over a year ago so conditions may have changed and my memory may be faulty....
But I imagine that their might be negative consequences to using two different CMMs to process your data. Photoshop allows you a choice of CMM's, which is consistent with an application "designed from the ground up for professional photographers."
Aperture limits many choices, both basic and esoteric.
fp

Edge Tools and Services Are Not Included in Creative Cloud Subscription?

I purchased my Creative Cloud subscription for a year. I have installed all the applications I intend to use from the Adobe Application Manager.
When I run the software that is part of the Creative Suite, it prompts me to register the product with my account and then it launches just fine. But when I try to run the software that is part of the Edge Tools & Services, it prompts me that I do not have a subscription and asks if I would like to start my 30 day trial. Shouldn't these applications be included in the Creative Cloud subscription? Or do they need a separate subscription for some reason?

Hi Kplover,
Which Edge tools are you asking about specifically? I think Edge Animate is the only one included for installation in Adobe Application Manager at present. Edge Inspect and Code are still in preview.
-Dave

Upgraded to 4.2 and now Mail and Safari are VERY SLOW...

For some reason since I upgraded to 4.2, both my email and safari are MUCH slower than they were before. Web pages take longer to load and when the Mail program checks for mail it takes forever. I checked out our internet connection (cable modem and Airport Extreme) and the connection is still very fast using our computers. This slowness issue is ONLY with the iPad. Has anyone else noticed internet speed issues with 4.2? ; Is there any solution? I have tried switching on and off the wifi option on the iPad and even restarting the unit but nothing seems to help.
Thanks!
Steven

Hi Steven,
Tap Settings / General / Reset / Reset Network Settings.
Restart your iPad. Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
Sometimes resetting to default factory settings can help a connection issue.
Carolyn

Color - Shine - background column of panels, contour line of tools and image area in Camera RAW

Is there any way to change - obscure - the brightness of the column trim panels and the outline of the image area in Camera Raw?.
In ACR 8.4 can change the brightness of the background image area - as in Ps - but can not find how to do the rest, and the truth is that it is a problem, since the image is darker than actual because of the brightness of the surrounding areas. Ideally there would be neutral gray .....
If you see an image in Bridge, having selected dark backgrounds for both the preview area and the various windows - thumbnails , metadata, folders , etc. - , as if we see in Ps with the same type of configuration (something Ps presents with dark background both in the area of image and layered windows , settings , menus, tools, etc ....) , we will see the picture clearer than in ACR , ie , if we develop a RAW file in ACR, especially if you have dark areas - eg night photographs - , end up leaving it more clear what is right, because of the contrast - glare - with the brightness of the area surrounding the image window , but I can not check until we go to Photoshop or return to Bridge.
So .... Is there any way to write the ACR window looking like Bridge or Photoshop ?. Is there a way to darken those areas (as there is in Bridge or Photoshop)?
If not, is something that developers should think about going ACR implemented with an update .....
(Not sure if this is the right place to ask this question ..... If not, I pray you tell me where to)
Thank you very much and kind regards

It took a long time to bring a dark UI to Photoshop & Bridge...sparked in part by Lightroom's dark UI. But, dealing with custom UI in plug-ins is a slightly different problem...I would like to see a dark UI as well. But it boils down to feature triage...given X number of engineer hours per version, what features are top most in the must haves...the elves on ACR are always working on new things. Hopefully a UI revamp (not just dark UI but also configurable panels and some other niceties) will rise to the top of the list.
One advantage of the new CC subscription model is that new features don't have to wait till some arbitrary major version number. New things can get added as they get done. Hopefully this will free up the ACR engineers to do some cool new things, sooner rather than later!

Websites load with all the words running horizontally one at a time down the left side of the screen and graphics are very basic if at all.

Websites are not loading in the sidebar. I don't have the sidebar onscreen and I went thru the bookmarks and made sure the load in sidebar was unchecked. The pages will not load correctly.'''bold text'''

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to Use NDS Tool and create a very simple application

Hi All,
Today i have Installed NDS on my machine,but i dont know
how to use it,is there any guide inside NDS which gives me step by step procedure to create a simple application.
Can any link help me know about this.version of NDS is 2.0.9.Is this latest one?
I am pretty confused about NDS and PDK,if NDS can be used to develop java apllications ,then whats the need of PDK at all?
Thanks in Advance
Rani A

Hi Rani,
The Portal Development Kit (PDK) provides documentation and examples with source code to demonstrate how to develop portal applications and portal content for the SAP NetWeaver Portal using the SAP NetWeaver Developer Studio.
PDK includes coding examples on the following topics:
*Creating Portal Components and Portal Services,Portal Profiles,Resources,Internationalization,Portal Beans,Page Builder,EPCF,Application Integrator,Connector Framework,Portal Navigation,Object Based Navigation,Transformation Service,User Management etc
PDK is for deployment for portal application, has very good documentation of portal development, contains sample application, Java Docs for all the apis for portal and KM and plugins for eclipse(which you don't need if you are using NWDS). It is basically a nice help for developer along with an iviews for uploading par and testing them.
In EP 6.0 it is just business package that you import to your portal. This will then give a "java development" role in portal which can be assigned to users. The role will then create a tab called "Java Development" in the top navigation and click on it you can see all the contents underneath.
If u want to see the application on which an iview is based on import that par file into NWDS.
Regards,
Pooja.

Safari 1.3.1 and tabs are very slow

I just upgraded to 10.3.9 and then downloaded Safari 1.3.1 (v312.3).
Now suddenly i am having new problems both with my tabs and with the way photos load on a page.
For tabs: if i am loading 3 or 4 tabs at once, and click between them just to see how much is loaded, i see the same screen image (usually the first one i click on) appear in all the tabs until each screen is totally loaded. Very annoying.
For Loading: especially a site with several photos. often they load on top of one another, so i can only see the top one. And yet, every time I click the reload button, the site reloads showing the photos in their normal positions in rows and columns.
these problems never occurred until i upgraded to 10.3.9 and the new Safari. Can somebody tell me if Apple is going to release a new version of Safari that fixes these bugs?

Yes. The "Integrate with Internet Browsers" function in the iGetter Tools menu is ON.
Sorry. I'll mark this topic as answered even is NOT true because I make mistake and post it TWICE.

CS 6 frame, tools, and descriptions are very pixeled

Similar Messages

Maybe you are looking for