CS: DBDriver failed to load univ connection
Windows 2008 (x64); AIX 6.1; BOXI31 SP3
I remote to a windows 2008 x86 environment where I have the BOXI31 SP3 client apps installed. from here, I import a univ file from an AIX 6.1 server > works fine, however, my connections don't work, keep getting the dreaded;
"CS: DBDriver failed to load : C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll (The specified module could not be found.)"
On my windows server, I do not have any oracle client or db installed....
However, this file (dbd_oci.dll is located at the path specified. Also I can access the CMC and InfoView through a browser > run reports with no errors...
thgts?
hi,
Start -> Run -> Please type 'services.msc'
In Services, Please verify whether Oracle related services are started or not.
If they are not started, Please start those services which are prefixed with Oracle.
Now Check the Connection in Universe.
Regarding Oracle 10g Client for 64 bit, following link may be helpful.
Monitoring RFCs on Remote Systems
Regards,
Vamsee
Similar Messages
-
DBDriver failed to load dbd_oci.dll while creating universe
Hello All,
I am trying to create a universe with Oracle as source. When I logged into Universe Designer and proceed to created a universe by selecting oracle 11 as data source, the designer throws an error:
" (CS) "DBDriver failed to load : C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll (%1 is not a valid Win32 application.)" .
Below are the environment details:
OS : windows 2008 server 64 bit
BO Server : BOE 3.1 sp3 32 bit
CMS : MySQL 5.1
Oracle Client: Oracle 11g 64 bit client is installed.
I have set the path and environment variables relating to oracle as well.
If I create a DSN and test connection it works fine. Please let me know your suggestions and inputs to resolve this error.
Thanks
MaheshAs BOCP-BOE, said, BOE XI 3.1 is a 32-bit application and is designed to 32-bit middleware connectivity. This is mentioned in the SAP BusinessObjects Enterprise XI 3.1 SP3 for Windows u2013 Supported Platforms document.
The document is available at http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000726132&_SCENARIO=01100035870000000202&_OBJECT=011000358700000555642010E
(You will need an SMP login) -
Dear Gurus,
I am trying to access universe through WEB INTELLIGENCE but the connection is giving me following error
DBDriver failed to load dbd_oci.dll (not a valid Win32) (WIS 10901)
"A database error occured. The database error text is: (CS) "DBDriver failed to load : C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll (%1 is not a valid Win32 application.
)" . (WIS 10901)"
As per the documentation , web intelligence uses BO server connection while tools like Designer uses local connection.
I am working on BO server only , both tool should use the same connection.
OS : MS WIndows 2003 R2 64 Bit
BO Server : bosmserv
Oracle : Oracle 10.2.0.4 , client 10.2.0.4
Connection to database schema is working through universe designer and System DSN but not through Web Intelligence.
In addition JDBC connection to the same databse schema is giving me following error CS: Java Class not found in classpath : oracle.jdbc.OracleDriver
Please suggest.
Note : I have already applied following note :
1378354 - If we create the webi document, the error occured "The specified module could not bi found(dbd_oci.dll), (WIS 10901)"
Regards
ArifHi All,
I had tried many ways but I still can't solve this error, can anyone tell me how to solve it?
OS of the Server: Windows Server 2008 R2 Enterprise 64 bits
SAP BO : BI 4.0 with SP2
DB: Oracle 11g , 64 bits
Problem: When I create a new relational connection in Information Design Tools, it pop up an error state that:
DBDriver failed to load : ...SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers\lib32\dbd_oci.dll (%1 is not a valid Win32 application.)
So far What I had done are:
1) I checked the PATH windows variable and the D:\app\oracle\product\11.2.0\client_1\bin directory is inside the PATH.
2) Restart SIA and Server
3) I download the Install Client and this do not solve the error also.
I can connect to the Oracle by using SQLPLUS and TNSPING also can ping the oracle database. -
Random error DBDriver failed to load
Hi, I've a problem which sometimes afflicts my scheduled reports: in jobcd trace file I found the following error:
assert failure: (TraceLog.cpp:1646). (false : TraceLog: SetErrorMsgException: CS, DBDriver failed to load : /app/bobje/bobje/enterprise115/linux_x86/dataAccess/RDBMS/connectionServer/libdbd_oci10.so (libclntsh.so.10.1: cannot open shared object file: No such file or directory)).
The report fails with a generic error DMA0007. Restarting the deskijobserver solve the problem. The error is random ....
My cms is on a remote Oracle Database, the value of LD_LIBRARY_PATH variable is the 32 bit library path of oracle installation ($ORACLE_HOME/lib32):
bobje@infoview: /app/bobje > echo $ORACLE_HOME
/app/oracle/product/10.2.0/db_1
bobje@infoview: /app/bobje > echo $LD_LIBRARY_PATH
/app/oracle/product/10.2.0/db_1/lib32
bobje@infoview: /app/bobje > echo $PATH
/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/java/jre/bin:/app/bobje:/app/oracle/product/10.2.0/db_1/bin:.
Im'using BO XI R2 SP5It's already present:
bobje@infoview: /app/oracle/product/10.2.0/db_1/lib32 > ll libclntsh*
lrwxrwxrwx 1 bobje oinstall 17 2009-02-25 13:21 libclntsh.so -> libclntsh.so.10.1
-rwxr-x--- 1 bobje oinstall 18429365 2009-02-25 13:21 libclntsh.so.10.1 -
Safari-Firefox both failing to load, network connected
I'm running firefox 19.0 and Safari 5.1.7. Both are crashing by failing to load for 5-10 minutes or in that looks like html code. Network diagnostics indicates network is fine. I've re-started multiple times w no change. Thank you in advance for any help.
That looks like it was the problem for me as well. I've just disabled it and after clearing the cache it looks OK now. Thanks for the solution!
-
Hi,
When i tried set Universe perameter it showing following error
Version: BOXI 3.1
Oracle client in BO server and database is in Oracle 11G
DB Driver Failed to load : E:\Program Files(x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll (The specified module could not be found) Network layer is not avilable (DAC0002)
ThanksReceiving following error:
DB Driver Failed to load : D:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll (The specified module could not be found) Network layer is not avilable (DAC0002)
Environment:
Windows XP SP3
Oracle DB - 10G
Oracle Client 10G
Business Objects XI (12.1.0.882)
Oracle BIN folder is include in PATH.
Receiving error on Designer, Universe Builder and Webi. Crystal Reports 2008 is working. -
Failed to load database information in Crystal 2011 using DB2 connection
Hello,
we have a Problem using Crystal Reports 2011 on SAP SBOP 4.0 SP2 Patch 10.
BI 4.0 Server is running on AIX. The Datasource is an DB2 database a connect from the OS is possible.
The x32 libarys of the DB2 client are availabe because the crystal 2011 reports server is running with 32 bit environment.
While opening / executing the crystal 2011 report the following error occur: "failed to load database information".
I've made a trace of crystal 2011 server with crlog. I found the following:
2012-1-27-7-17-33 9371804 searchpath.cpp 379 Failed to load libcrdb_db2cli.so 1
2012-1-27-7-17-33 9371804 qecommon.cpp 117 This value is write-only. File Name: "QEProperty.cpp". Line: 145
2012-1-31-13-8-23 9371804 QESession.cpp 445 Set Product View Locale: 1033 20
2012-1-31-13-8-23 9371804 QESession.cpp 479 Set Preferred View Locale: 1033 20
2012-1-31-13-8-23 9371804 QESession.cpp 501 Set Process Locale: 1033 20
2012-1-31-13-8-23 9371804 qecommon.cpp 117 This property is currently in a read-only state and cannot be modified. File Name: "QEProperty.cpp".
An ldd on the operating system says all libarys are availabe:
bash-3.2$ ldd /usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/crpe/libcrdb_db2cli.so
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/crpe/libcrdb_db2cli.so needs:
/usr/lib/libC.a(shr2.o)
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libetc.so
/usr/lib/libC.a(ansi_32.o)
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libBCM.so
/usr/lib/libC.a(shr.o)
/usr/lib/libC.a(shr3.o)
/usr/lib/libc_r.a(shr.o)
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libcxlibw.so
/usr/lib/libpthreads.a(shr_xpg5.o)
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libOCAhelperw.so
/home/boeadm/sqllib/lib32/libdb2.a(shr.o)
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libsatlw.so
/usr/lib/libC.a(shrcore.o)
/usr/lib/libC.a(ansicore_32.o)
/usr/lib/libpthread.a(shr_comm.o)
/usr/lib/libpthread.a(shr_xpg5.o)
/usr/lib/libC_r.a(ansi_32.o)
/usr/lib/librtl.a(shr.o)
/usr/lib/libc.a(shr.o)
/unix
/usr/lib/libcrypt.a(shr.o)
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libTraceLog.so
/usr/lib/libiconv.a(shr4.o)
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libicuuc.so
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libicui18n.so
/usr/lib/libdl.a(shr.o)
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libboez.so
/usr/lib/libpthreads.a(shr_comm.o)
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libebus.so
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libfssl.so
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/liblocale_fallback.so
/home/boeadm/sqllib/lib32/libdb2osse.a(shr.o)
/home/boeadm/sqllib/lib32/libdb2locale.a(shr.o)
/home/boeadm/sqllib/lib32/libdb2g11n.a(shr.o)
/home/boeadm/sqllib/lib32/libdb2osse_db2.a(shr.o)
/home/boeadm/sqllib/lib32/libdb2genreg.a(shr.o)
/home/boeadm/sqllib/lib32/libdb2install.a(shr.o)
/home/boeadm/sqllib/lib32/libdb2trcapi.a(shr.o)
/home/boeadm/sqllib/lib32/libdb2dascmn.a(shr.o)
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libicudata30.so
/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/libicuuc30.so
bash-3.2$
Does somebody have an idea where to search to get a solution for this error?
PS: With Crystal for Enterprise 4.0 everything works fine, but the Crystal for Enterprise 4.0 services are running with 64 bit.Hello All,
the Problem has been found by SAP. The Business Objects Server is searching for an env variable called LIBPATH32.
By default this has not been set to the DB2 x32 Libary path by AIX or SBOP setup.
We solved the issue by adding the following (LIBPATH32) into the file .profile
The following three lines have been added by IBM DB2 instance utilities.
if [ -f /home/boeadm/sqllib/db2profile ]; then
. /home/boeadm/sqllib/db2profile
LIBPATH32=/home/boeadm/sqllib/lib32:$LIBPATH32; export LIBPATH32
fi
After doing:
bash-3.2$ cd /usr/sbop/sap_bobj/
bash-3.2$ . setup/env.sh
The path has been set correctly to the x32 libarys:
LIBPATH32=/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/:/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/crpe/:/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/crpe/mw/:/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/ras:/home/boeadm/sqllib/lib32::/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/crpe/mw//lib-aix4:/usr/sbop/sap_bobj/enterprise_xi40/aix_rs6000/crpe/mw//lib-aix4_optimized
Kind regards
Marc Reiter -
Crystal Server 2011 "Failed to open the connection" with 32 & 64 bit drivers are loaded
Brand new installation of Crystal Reports Server 2011 with CR Developer 2011 as well. Downloaded new Postgres and MySQL drivers for both the 32 and 64 bit ODBC definitions. Created a new report on the server to eliminate any migration driver incompatibility issues. Reports run fine in Developer but give the same "Failed to open the connection."
and still problems running the reports If I Save Data with the reports, I can click View to see the data, but they will not refresh.
All the articles I'm finding online seem to point to the issue with needing 32 & 64 bit drivers, but I've loaded both and built my ODBC connections with the 32 drivers in the SysWOW64 folder.
Logged in as Administrator. Any thoughts out there? Are there some new security measures?
Thanks in advance ...Yes, Designer and CRS are on the same machine.
Good catch with the 5.1 driver. I loaded up the mysql-connector-odbc-5.1.13-win32 driver and used that. It alone failed when I made the ODBC connection with it. I see on the CRS 2011 Feature Pack 3 .pdf file that it says "Only 64-bit database connector middleware is supported" ... I downloaded the other mysql-connector-odbc-5.1.13-winx64 64bit file, but teh .msi and .zip versions failed on the load. Do I need that if it says that or should the first one be enough?
I've been trying to use a normal User DSN, no? Apparently I don't have access as a machine Administrator to do it as I get "You are logged on with non-Administrative privileges. System DSNs could not be created or modified." Having our server guys get that straightened out and we'll see. Had not heard of that actually but will give it a go.
You say I should create the DSN entries in the 64 bit version of the ODBC Data Source Administrator ... located in the system32 folder, not the SysWOW64 folder, where the 32 bit drivers are found, yes? Isn't that the "wrong" location to use I've been reading? Or are System DSNs different from a User DSN?
BIG thanks for the replies. I owe you beers!!!!! -
Internet appears connected but pages fail to load after 3-5 minutes! HELP!
I purchased my Macbook three weeks ago and it immediately found my network and connected. A few days later my computer failed to load internet pages (both in firefox and safari). The connection would not disconnect, or seem to slow. I diagnosed and found no problems. To get it to work for small amounts of time I turn off airport and then turn it back on and get a few minutes before I get "Problem Loading Page".
I have updated the firmware in my router. I use a D-Link Router WBR-1310 and a D-Link Cable Modem DCM-202. I have called my cable provider, Comcast, and they tested the connection saying it was strong. I connected directly to the modem and it never failed to stop loading pages the full 20 minutes I was connected.
My computer has no problem connecting to other connections: The Library, neighbors, my parents' home. There are no time outs and it automatically connects through Airport, no problem.
I have called D-Link about the router. They're a bit confusing in troubleshooting the problem. They told me to connect my Ethernet cable to the computer and manually put in IP address, subnet mask, router address, and name server address. First, I don't know where to find any of that except for the IP address. Secondly, do they expect me to connect and leave the ethernet cable in my computer?
Have there been any problems with Macs and this router? What am I doing wrong and has D-Link given me good steps to take? My experience with them hasn't been so great so I'm skeptical. All of this is very upsetting, I can't enjoy my new Macbook at home.FrankInColorado wrote:
Yes I had read about this. The point is, especially with something such as wireless, it has to inter-operate with everyone else out there. You would think Apple would do some testing before going to some "recommended" standard that obviously is not widely used in the real world. To someone who just bought a new MacBook, it doesn't matter that Apple is using the "new" recommended way. They just want to be able to connect everywhere they go.
No, networking is a world of standards and recommended procedures. This all used to be a lot easier when there were actual engineers who understood the RFCs running most networks.
You seem to think Apple just throws software over the wall. If that's true, you should swing by Cupertino some time and see if you can meet with a member of their software test groups; I'm sure they'd love to know that you think they don't do anything.
Or perhaps Apple is supposed to test their software with every ISP on the planet first.
And how many people posting in these forums have said when they turn Airport off and back on, then things work again for a while. If the issues are on the other side, why would that make any difference?
Did I or anyone else here say that changing to OpenDNS' servers would solve every issue with every person in each and every one of these threads?
But there have been many cases where switching to OpenDNS' servers does solve people's network delay issues. Hmmm, I guess Apple's cluelessness doesn't apply in those cases.
Come on. He connected directly to the modem and was loading Web pages for 20 minutes without any problem. He goes back to using Airport and the problem reappears. And you think it's reasonable to assume it was just a coincidence that the supposed DNS issue went away while he was connected to the modem and reappeared when he went back to Airport?
It depends now, doesn't it, as I just said.
Perhaps he tried "surfing to a few sites" while connected directly, and when that worked he went back to AirPort. Did he try going to the same sites? Different ones? We don't know.
In fact, even if he did visit the same sites, that wouldn't tell us anything either way as the DNS resolutions for those sites would have been cached when he was connected to the wired network.
This is the same thing that has happened to me since upgrading to Leopard. My wireless started going bad after some minutes of accessing Web sites. If I rebooted the machine, it would be fine again for a while. I finally just turned Airport off and plugged in an Ethernet cable. I have not had any trouble with accessing Web sites since - same ISP (Comcast), same DNS servers.
Tell me there is no Airport issue.
I never said there weren't issues. No one did. Except you implied I did.
Your approach to troubleshooting seems to be "Ah, Apple's software is broken, why bother."
1) There are many people whose problems have been solved by switching to OpenDNS' servers. That's fact.
2) There are many ISPs who have broken DNS servers. That's also fact.
3) Comcast has a variety of DNS servers spread across the country, so your results in Colorado may differ from those of a Comcast subscriber in a different state. Fact again.
4) You asked for reasons, I gave them, you don't like them. Obviously I must be an Apple shill. Funny, I'll have to ask why I haven't received a paycheck from Cupertino. Ever.
I understand your frustrations if AirPort isn't working for you, but don't turn around and drop into troubleshooting threads and tell people why suggestions we're making can't possibly address their issues just because they haven't solved your particular issue.
That would be just as silly as me assuming that because I haven't seen an AirPort drop since 2007, all of those posting in threads here are simply delusional or incompetent.
The only way to find out what's wrong in each case is to be methodical, and step one in diagnosing network delays is to see if DNS is at fault.
If it is, great, problem solved. If not, on to step two of a nearly infinite sequence.
One step at a time. -
Failed to load resource the network connection was lost
I am uploading a 2 gb file into my application using chrome in my MacBook Pro, i keep getting an error (FAILED to load resource: net::ERR_CONNECTION_RESET) when the file is 100% uploaded and the file starts uploading from the beginning (1%... and so on). This issue is not happening when i am doing the file upload using chrome in my windows 7 machine. I Also noticed in the same MacBook if i upload through Safari i get the same error (failed to load resource the network connection was lost). Please let me know what additional information i can provide technically.
Regards,
Charancommon guys..nobody have any solution for this...i have seen many people complaining about large file upload issues in MacBooks which wont happen in windows.
-
Failed to load Connection...
Dear all,
Now that I'm able to use and publish my projects properly, I'm facing a "Failed to load connection" on my first report, on my production machine.
I'm using on my development machine SQL Server Express, and getting connected via an ODBC connection for my Web .NET project. This works fine, but on my production machine, although I have created the same ODBC connection (same name, same sql instance) the error "Failed to load Connection" is raised.
"GabillySAS" is the name of the ODBC connection. I've used the Help file provided for Crystal Report 2008 with Visual Studio 2008, so the code is :
private void Page_Init(object sender, EventArgs e)
ConfigureCrystalReports();
private void ConfigureCrystalReports()
CrystalReportViewer1.ReportSource = Server.MapPath("\\content\\heures\\rapports\\"+Request.QueryString["id"]);
ConnectionInfo connectionInfo = new ConnectionInfo();
SetDBLogonForReport(connectionInfo);
connectionInfo.DatabaseName = "GabillySAS";
connectionInfo.UserID = "----";
connectionInfo.Password = "-----";
private void SetDBLogonForReport(ConnectionInfo connectionInfo)
TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
foreach (TableLogOnInfo logOnInfo in tableLogOnInfos)
logOnInfo.ConnectionInfo = connectionInfo;Hello. Victor;
I see two things that may be the issue.
1. You appear to pass the ODBC DSN name to the Database property
2. Fill the ConnectionInfo variables before passing to LogonInfo.
It should be:
public partial class _Default : System.Web.UI.Page
private void ConfigureCrystalReports()
ConnectionInfo connectionInfo = new ConnectionInfo();
connectionInfo.ServerName = "DSNname"; //ODBC DSN
connectionInfo.DatabaseName = "DBname"; //e.g. Northwind
connectionInfo.UserID = "userID";
connectionInfo.Password = "password";
string reportPath = Server.MapPath("ODBCconnection.rpt");
crystalReportViewer.ReportSource = reportPath;
SetDBLogonForReport(connectionInfo);
private void Page_Init(object sender, EventArgs e)
ConfigureCrystalReports();
private void SetDBLogonForReport(ConnectionInfo connectionInfo)
TableLogOnInfos tableLogOnInfos = crystalReportViewer.LogOnInfo;
foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
tableLogOnInfo.ConnectionInfo = connectionInfo;
Does that work as you expect?
Elaine -
Hi,
I created a Crystal Report (CR XI r2) using Universe and database is Db2.
My report is working fine in Crystal report ,.But when i am uploading this report (Save AS ->enterprise) to repository ,and then trying to preview this report from CMC/Infoview,it throws error "Failed to load DB credentials "or sometimes it throws" Failed to open Connection" .
I have given DB user credentials correctly and used both option "prompt user for DB logo" as well as "use same database logon" .
I am not sure why it is throwing this error.I checked both "Bo server machine as well as Client machine ,both are having DB2 cleint installed and configured.
Is this an issue with Service Packs ?
As my machine configuration is -
BO Client - BO XI R2 RTM + SP1+SP2
BO Server (Linux) - BO XI R2 RTM
If anybody faces the same issue ,please share the solution with me,as it is very urgent .
Thanks
NitinHello,
Thank you for your post.
Based on your description, your issue is out of support of VS General Question forum which mainly discusses
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I suggest that you can consult your issue directly on SAP Crystal Reports:
http://scn.sap.com/community/crystal-reports/content?filterID=content~objecttype~objecttype[thread]
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
I am developing a web tool that accesses client's Bingads accounts via OAUTH2 granting. I am downloading data from clients daily.
Generally it worked, but for 2 days I am experiencing a weird issue, that in random times (but more and more often though) I receive random error messages from Bing server. I am pasting below a few example from my logs (with timestamp and request/response).
Must note that I launch these requests from the server where we have the webapp but also I launch it locally. The same is the result.
The timestamp is in France time (GMT+1).
Thanks ahead!
Best regards,
Steve
2015-01-14 15:08:05: Service\BingAds::initService => SOAP-ERROR: Parsing Schema: can't import schema from 'https://reporting.api.bingads.microsoft.com/Api/Advertiser/Reporting/V9/ReportingService.svc?xsd=xsd0'
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetDetailedBulkDownloadStatusRequest><ns1:RequestId>108277125</ns1:RequestId></ns1:GetDetailedBulkDownloadStatusRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetDetailedBulkDownloadStatusResponse
xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Errors i:nil="true" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><ForwardCompatibilityMap xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><PercentComplete>100</PercentComplete><RequestStatus>Completed</RequestStatus><ResultFileUrl>https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=XXX</ResultFileUrl></GetDetailedBulkDownloadStatusResponse></s:Body></s:Envelope>
2015-01-15 05:41:39: Service\BingAds::getCampaigns => SoapFault: Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)
2015-01-15 05:45:00: Service\BingAds::initService => SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
2015-01-15 11:58:46: Service\BingAds::getCampaigns =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)
2015-01-15 11:59:50: Service\BingAds::initService =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetCampaignsByAccountIdResponse
xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Campaigns xmlns:i="http://www.w3.org/2001/XMLSchema-instance"></Campaign>........</Campaigns></GetCampaignsByAccountIdResponse></s:Body></s:Envelope>
2015-01-15 12:05:55: Service\BingAds::getCampaigns =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)Hi,
1. I am using the older version of the PHP library provided by Bing (updated on 1/20/2014), so that is doing the WSDL loadings. I initialize the proxy calling OpticoBingAdsClientProxy providing what it needs, and then do the requests.
2. I have a cron that reads data from client's accounts. I make several calls, like get search query report, get keyword performance report, get keyword bulk data. As the script progressed the first 2 worked and the third gave error. Or in other cases the
first request failed. The calls have quite some time in between them since I process data (sometimes even 160 seconds)
3. I did not change the code ion terms of requests, since as I said I use the PHP library (same credentials, ...).
As of today (2015-01-16 10:30 GMT + 2) running my script, still have the same issues.
Thank you!
Steve -
I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?
Hi there KrisonCastillo,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
Keep getting this message while using Gmail "Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode. "
I have to use the older version of gmail for it to work properly.now i cant even send emails out of gmail, except when using the older version.
Maybe you are looking for
-
Different versions of the same app on the app store
Is it possible to let users download the different versions of the same app from the App store,( even though I have not seen it but just wonder whether it is possible) ? If not then can we have different releases of the same product with different fe
-
hey guys, just purchased this board (see topic) and tried to overclock my 3200+ amd venice core. For some reason i cant get the voltage to go any higher than 1.45 in the bios (or elsewhere), no other options in the menu are selectable, only 1.450 and
-
Overloading (Signature/Number of Arguments)
Hi friends, I am relatively new to java. I have written this program - 1 /* 2 * Xtemp.java 3 * Created on January 21, 2002. 4 */ 5 class material{ 6 public void item(int abc){ 7 abc = abc * abc; 8 System.out.println(ab
-
Transformation inactive after system copy in SCM system
Hi Team, I am posting this in BW keeping in mind that i am receiving issues in RSA1 transaction in my SCM system after the recent system copy. We did the system copy of SCM system and DTP conversion was also done using program RSBKDTP_BDLS. No errors
-
Can I see my old messages on imessage?
I got a new ipod and I want to see my old messages from my other ipod. I am still using the same email, but I want to know if I can see my old messages.