CS Extension Builder 2.1 won't install, getting an empty directory

I purchased and downloaded CS Entension Builder 2.1 after the trial expired. After install I only get and empty directory named "Adobe Systems Incorporated/Extension Builder". Is there a fix for this?
Thanks for your help

First you need to uninstall the trial build. Clean regisry if needed. Then after the installer process finished, Extension Builder 2.1 will be installed as a plugin in the Flash Builder 4.x.

Similar Messages

  • 10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

    10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

    Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

  • HT1349 Win 7 64 bit:  iTunes won't install, get error code 2324 or installer says I am not logged on as administrator:  only one user and it is an administrator user.

    Win 7 64 bit:  iTunes won't install, get error code 2324 or installer says I am not logged on as administrator:  only one user and it is an administrator user.

    Hey there k8ei,
    Thank you for using Apple Support Communities
    I found this article for you to help troubleshoot installing iTunes named Trouble installing iTunes or QuickTime for Windows found here http://support.apple.com/kb/HT1926.
    Here is a general overview on where the troubleshooting will take you:
    General installation troubleshooting
    1. Empty your Temp directory and restart
    2. Completely remove iTunes and related components
    3. Install the latest version of iTunes
    Additional troubleshooting
    After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
    1. Make sure you have administrator account access
    2. Make sure your folder names don't contain strange characters
    3. Get the latest Windows updates
    4. Disable other conflicting software
    All the very best,
    Sterling

  • Hi!  Need help!  I downloaded Reader 9.1 and now it won't install  Get error message "Error 1606. Could no access network location %APPDATA%\.  I'm about ready to trash my computer!  Thanks!

    Hi!  Need help desperately!  I downloaded Reader 9.1 and it won't install.  Get the error message "Error 1606.  Could not access network location %APPDATA%\.  Thanks!

    Hello again:
    I don't mean to step on any toes here but it seems that the root of the problem is being ignored. I offered before that the problems you are experiencing are due to inconsistencies in the Windows registry. While I could speculate on the various methods of how this came to be, I don't have that kind of time nor is there a need. More than likely it is some type of malware that has infected the system but that should be explored on more suited forums such as MajorGeeks.com or BleepingComputer.com. The way I see it, you have a few paths you can take, all of which will lead you to the same place: no more error 1606 and a functional Reader:
    Option 1: Run the Windows Live OneCare free safety scanner to resolve any broken registry links it can find.
    Option 2: Manually fix the "broken" registry entries in the Windows registry. While I understand Pat's hesitation to do so, the truth of the matter is it will resolve the immediate issue. Once the APPDATA path is corrected, you should then be able to install Reader.
    Option 3: Restore Windows to a previous date using System Restore located in Help & Support of the Start menu.
    Option 4: [SLEDGE HAMMER] Reinstall Windows over the top of the current installation (NO FORMAT). Use this option only if you have no other recourse. The potential to lose all personal data and settings is high if this option is not performed correctly. If this option is chosen, be certain to use a "setup" profile (username) different than your current username. If you only have a manufacturer's system restore disk rather than a Windows CD/DVD, you may not have the option NOT to format which WILL result in the loss of personal data. This option should only be performed by someone who has previous knowledge of such or is willing to learn even at the expense of data loss/time/effort.
    I HIGHLY recommend that any and all personal data is backed up to an external location such as a USB key, CD/DVD, or external hard drive prior to performing option 2 or 4 above. If you would like any of the options explained in greater detail, feel free to ask and I will oblige.
    Best of success!
         Michael

  • Coldfusion Builder beta 2 won't install

    Howdy,
    october 15,2009, my cfbuilder beta 1 said the trial has run out. So I uninstalled it, and then reinstalled the beta 2. I have cfeclipse on my ganymede eclipse...it says that could effect my cf builder install, but it did not effect the beta 1 install. When I do the install, it seems to install, but when I try to bring up that persective, it is not there...my cfeclipse is there, and all the other perspectives are there, but not the cfbuilder perspective.
    anyone have any ideas why it would not install?
    thanks
    Dan

    Yes i understand it might conflict, however, it did not conflict with beta 1. Do you or anyone else know if they did something in beta 2 that conflicts with cfEclipse? I'd hate to uninstall cfEclipse, install cfBuilder beta 2, and it still not work.
    If nobody has any other ideas, i'll try this approach...then come January, i'll probably have to install cfEclipse back till we get the full blown cfBuilder.
    thanks for the help
    dan

  • New Computer Build with Windows 7 Adobe Flash Player won't install freezes with empty black box

    I have just build a new windows 7 computer and every time I try to install adobe flash player, after clicking the install button, it goes to an empty black adobe box and freezes.  I have tried changing settings in IE, but I can't figure it out.  Will someone please help me.
    KD

    Does it appear to be the same as my issue on win8.1?:
    Empty installer dialog on Windows 8.1

  • EasyRotator for WordPress - Slider Builder] Adobe AIR won't install on Linux

    The auto-installer is a Windows executable.  Not much use on a Linux box.
    http://wordpress.org/extend/plugins/easyrotator-for-wordpress/
    I tried to install the plugin on http://5v5flag.com.   Granted I am running the latest wordpress version. Is anyone else having this problem. The solution that was offered to me is to try the newest version of Adobe Air and then the Easy Rotator installer. Still that did not work for me.

    You will have to contact the author of the plug-in. This has nothing to do with Adobe.
    Mylenium

  • Flash Builder Beta 2 won't install

    Hey, the installer is saying that "the version of this file is not compatible with the version of windows you're running".   I'm running windows vista 64 bit, but have installed plenty of 32 bit apps just fine.  I was able to install beta 1 just fine.  I started the install process for beta 1 again, and it seems to start OK (though I don't want to continue and run the install of beta 1 over my current install).
    Did the labs team overlook something in the installer in this round?  Any workarounds I can use?
    thanks

    Yes i understand it might conflict, however, it did not conflict with beta 1. Do you or anyone else know if they did something in beta 2 that conflicts with cfEclipse? I'd hate to uninstall cfEclipse, install cfBuilder beta 2, and it still not work.
    If nobody has any other ideas, i'll try this approach...then come January, i'll probably have to install cfEclipse back till we get the full blown cfBuilder.
    thanks for the help
    dan

  • Leopard won't install, gets stuck at galaxy picture

    Hello, I am trying to install leopard using an upgrade DVD and this is what happens.
    I insert the dvd and it tells me i must restart my computer.
    it asks for my password to grant permission to install.
    after entering the password, it accepts it and shuts down.
    I hear the startup noise and then i see the leopard galaxy picture and nothing else. I can hear the disc spin for about 15 seconds and then nothing. if i click the mouse or press a button the keyboard the disc begins to spin again for another 15 seconds. also if i leave it for about 10 minutes, the disc begins to spin again. I have left it for over an hour thinking maybe it was doing something, but so far nothing. Anyone have any ideas?
    I am using a mac pro

    I have the exact same issue, using a MacBook. Can anybody help out?

  • Itunes won't install get error 'could not access network location'

    I get the following error message when I try to install itunes 10.5 on a new windows 7 pc.
    Tx in advance for the help.

    With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
    You receive an "Error 1606" error message when you try to install or remove a Microsoft program

  • How do I install and build and extension with extension builder 2.1?

    Honestly, I am beyond frustrated right now.
    1. Extension Builder 3 - This will only install and run with Eclipse. JRE 1.7.
    This only allows me to use Extendscript to write scripts with. Extendscript is so frustrating to use. It seems like there are a lot of missing properties for working with color models in illustrator. The documentation is also terrible for Extendscript. Something that seems like it would be simple to do like export an RGB JPEG is impossible to spec out in the EXPORT JPEG settings. Its also impossible to set the color space of a NEW AI document unless you use the add(); instead of addDocument(); There are conflicting incomplete properties of both methods. If you use one, one set of settings is missing if you use the other another set is missing... WHAT IS SOMEONE SUPPOSED TO DO???
    2. Flash Builder 4.7 will not run Extension Builder 3.
    3. I bought Extension Builder 2.1 which is supposed to install Flash Builder 4.6, but the installation keeps failing right at the end. This apparently also requires that you use JRE 1.6 which is not compatible with Mavericks.
    This all seems impossible... how in the heck are people learning how to do build extensions, its a surprise that any exist at all. If they do They are likely not building them with the Adobe tools. I know enough about code to be dangerous but don't have a doctorate in troubleshooting all of these compatibility, and documentation issues.
    All I want to do is write an extension, or a script that allows me to
    1. copy the art from two layers.
    2. color the background of the AI document to the background color of the original document
    3. resize art from both layers to fit on a 216 x 216 pixel square.
    4. Save the document as a: JPEG - ANTI-ALIAS SUPER SAMPLED - 150 DPI - RGB - MEDIUM QUALITY - CLIP TO ARTBOARD - WITH THE SAME NAME AS THE ORIGINAL FILE
    I AM AT MY WITS END WITH THIS WHOLE PROCESS. I AM ABOUT TO GIVE UP UNLESS SOMEONE CAN HELP GIVE ME A LITTLE INSIGHT.

    Hi,
    First of all, remember that Extension Builder 2.1 only supports building Flash based extensions which have been phased out. If you are building extensions for Creative Cloud and beyond, you should use HTML5. See more info here: Introducing HTML5 extensions | Adobe Developer Connection
    The installation is probably failing because you have some leftovers from a previous installation. The installer will detect if you have Flash Builder 4.5 or Flash Builder 4.6 installed (NOT Flash Builder 4.7). If it finds that you have Flash Builder 4.5/4.6 installed, it will attempt to install the plugin on top of it. If it does not detect Flash Builder 4.5/4.6, it will install Flash Builder 4.6 Premium.
    I highly recommend you look into the new HTML5 extensibility. Here you can find tons of resources: Adobe CEP Resources by Adobe-CEP
    Best regards,
    Hallgrimur

  • Install Extension Builder 2.1 trial failed [ windows 7 64bits ]

    Hi !
    Trying to install the trial version of Extension Builder 2.1 on windows 7 64bits,
    I'm stopped by the msi app that is not go true the last step of install...
    Saying that it can't install Extension Builder 2.1 because Extension Builder 2.1 is not installed !
    Don't now what to do whit this.
    pierre.

    Hi !
    I finally succeded in installing Extension Builder 2.1.
    I followed the advices from that forum topic http://forums.adobe.com/thread/1245836
    and installed manually Flash Builder 4.6 before.
    The first try failed. After cleaning of the registry for "Extension Builder" items, the installation succeded.

  • I get an access denied error when logging into extension builder 2.1 on Flash Builder 4.6

    I get an access denied error when logging into extension builder. The error is: You are not eligible to use CSIDE1 services due to the Service Eligibility Requirements.. Very frustrating since there is no other option than to read the adobe legal docs.
    Before this started happening I was prompted to put in my birthday (WHO KNOWS WHY ADOBE NEEDS MY BIRTHDAY). I filled it in wrong and now this....
    PLEASE HELP

    Ok this problem is fixed.
    Info for anyone else who faces this problem.
    Apparently when adobe designed the extension builder installer package, they decided to get cute and try to figure out what version of the software, the extension builder package files should be installed into. So if you have FB4, FB4.6, and FB.7 there is no telling where it will go. Also if you try moving these folders somewhere else out of the applications directory, the installer will still find them on the system. I finally figured this out by watching my system log and seeing
    11/22/13 12:13:46.258 AM cp[70909]: Cannot make directory /Applications/Adobe Flash Builder 4.6/Adobe Flash Builder 4.6.app
          Location: /Users/myuser/Downloads/Adobe Flash Builder 4.6-adobegarbage/plugins/com.adobe.cside.ui_2.1.0.201304282312/icons: No such file or directory
    After removing every single instance of places the package installer was trying to use. It finally resolved to the correct FB4.6 location. Why adobe could'nt spend a little extra time add a destination selector in the package installer is beyond me, but hey i only wasted 3 days trying to figure this out.... Sadly it isnt the first time i've wasted copius amounts of time fighting Flashbuilder problems.
    Halligrimur, thank you for your help. It did lead to me solving the problem.

  • MY Itunes won't install...device failed to start verify that you have sufficient privileges to start system services???

    My itunes won't install  get the message...device failed to start  verify that you have sufficient privileges to start system services

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Adobe Exchange download won't install in Extension Manager CC - no valid certificate.

    I've been struggling to load the Adobe Exchange download into Extension Manager CC.  It won't install due to it having 'No valid certificate'.  Is there a fix for this?

    Please click "Tools"->"Preferences" menu item in Extension Manager, uncheck "Allow Extension Manager to access Internet" option, then retry.

Maybe you are looking for

  • Can't get ibooks onto new macbook pro

    Hi I got myself a new macbook pro set it up and all great ibooks came up right away but my sister in law got the same macbook pro as i but i cannot get ibooks onto it, i have been to the app store but its not there i really cannot remember howi got m

  • IPod Nano Freezes / Resets / Skips

    My new 3rd Gen iPod Nano randomly freezes on certain videos (in the same spot EVERY time), resets in the middle of certain videos (again in the same spot EVERY time), and even skips (i mean entirely to the next song, not just a stutter) when I listen

  • HT1386 Can't sync calendars

    When I try to sync, most of the sync goes fine, but I get an error message that says, "iTunes could not sync calendars to the iPhone "<name>" because the iPhone disconnected." I've tried every style of connection (USB, wireless) but the result's the

  • Can we make as P.center as required field for Bank accounts

    hi friends, can we make as profit center as required field for bank accounts in field status group. If we make as required, what are the impact /consequences will happen. We are drawing Financial statements at profit center level. We are using ECC 6.

  • Reports drill down feature

    Hello, there is drill down option that can be used during user-defined report creation (SQL Developer 3.1 EA1) Do you know where I can find documentation on how to setup it? Thanks, Andrey Edited by: Andrey Goryunov on 10-Oct-2011 18:08