CS Host Error Message !

HI,
When ever i open IE, I would get the following error message !
name=Error number=-2146827859 description=Automatin
server can't create object message=Automation server Can't create object
Then i changed the settings and made home page as "Use Blank".
Now, when ever i type some URL and press "enter" button, i get the same above
error message. I contacted network people, even they don't know what is the solution.
Can any one help me please !
Regards,
AShvini

I uninstalled and re installed IE, and updated it from the web. I checked in google. It says uninstall all the comet cursor s/w. But none of comet s/w runs in my system.
Is it related to Tomcat server ? I have that server in my pc !!
Until unless i close/cancel that error message, i am not able close IE window. To close that error message i have to click ok/cancel button 10 to 15 times !
Please any one help me !?????
P L E S E !!!!!
Regards,
Ashvini

Similar Messages

IQ525A - Two Windows Script Host Error messages, plus folders won't close

How do I get folders to close, when right clicking will not close them? I am running Trend Micro security and also have two Windows Script Host error messages appearing. I need to click OK to proceed each time I use IQ525A/
assume IQ is running in safe mode, as start menu and bar is white.Any suggestions
Thanks
Kitcat

Crash report:
https://crash-stats.mozilla.com/report/index/ab4ee242-57f1-4a84-baef-ca2202150308
Signature shutdownhang
Start your '''Computer''' in safe mode with networking. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode; Free Online Encyclopedia]'''
Wait a few minutes (don't go anywhere), then close it.
Is the problem still there?

Keep getting the failed connection host error message!!!

Im trying to install ADE so I can run my NOOK study app properly and read my textbooks, but everytime i keep trying to install, i get the connection to host failed message. I already disabled my firewall settings and theres no antivirus software on my computer (Windows 7). HELP PLEASE!!!!!
Trying to contact customer support, but the wait is an hour and a half long! And Chat is busy as well.
Greatly appericiate the help.

yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

"Unauthorized Host" error when you try to connect to the admin server

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

Error Message from ITS "host parameter is null" - Huh?

I am having trouble submitting a podcast to the iTunes Store.
I have a podcast that I can access directly through my blog: blog.mindthegap.us
The RSS2 feed to my podcast is: http://blog.mindthegap.us/podcasts-only/rss2.aspx
I have subscribed to my podcast through the "Advanced" menu in iTunes. It finds my podcast and adds them to my podcast library.
BUT, when I submit my podcast to the iTunes Store, I get this message:
We had difficulty reading this feed. host parameter is null
I just spent an hour with tech support from godaddy determining that the feed is legit.
Can someone help me resolve why iTS won't take it?
Thanks

I had sumitted the same (or variations of the same) for nearly a week and after submitting the question to iTunes Technical Support, tried one more time.
Eureka! It was accepted. The only thing that I could possibly have changed was to have added some episode descriptions. The error message "host parameter is null" isn't very helpful if that WAS the solution.
Now, I can get back to my podcasts.

How can get Dreamweaver to stop error message: an ftp error has occurred- cannot connect to host?

Dreamweaver is locking me out when I try to connect to the host via ftp. I get the error message: "An ftp error has occurred - cannot make connection to host". This error message started yesterday when I used the wrong host ftp address too many times. I have since received the correct ftp address from my website host, but the system won't even let me log in...it just gives me that error message when I click the connection button on the panel. My website host recommends that I uninstall Dreamweaver and re-install it again. My concern is, if I un-install the Dreamweaver app, which I downloaded from the Cloud, will the Cloud know I've un-installed Dreamweaver and allow me to download it again? Please help.

See my response in your most recent thread. Please don't double post like that - it can confuse things considerably when replies come in to both threads.

Every time I try to connect to the iTunes Store I get this error message "iTunes could connect to the iTunes Store. The host is down. Make sure your network connection is active and try again." 2011 2.3 GHz i5 Mac Mini 8GB ram OS 10.7.2 iTunes ver 10.5

Every time I try to connect to the iTunes Store I get this error message
"iTunes could connect to the iTunes Store. The host is down.
Make sure your network connection is active and try again."
2011 2.3 GHz i5 Mac Mini
8GB ram
OS 10.7.2
iTunes ver 10.5.1
My internet connection is fine.
Anyone know how to fix this? Every reference I have found is old, nothing recent like Lion or newest ver of iTunes.
Help Please!

Hey thatssoivi,
If you are having an issue with being unable to connect to the iTunes store, I would suggest that you troubleshoot using the steps in this article -
iTunes for Windows: iTunes Store connection troubleshooting - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

HT5654 I often travel abroad and my host has changed Internet provider. Then my service was interrupted and I can't update iTunes. Any tips to stop the error messages?

I often travel abroad and my host has changed Internet provider. Then my service was interrupted and I can't update iTunes. Any tips to stop the error messages?

Wow! At least on Apple TV, problem solved. Apple: what's not to love? Please give me credit if you use it in marketing campaigns... ;-)

Provider hosted app error message: The remote server returned an error: (429) Too Many Requests.

Hi,
I have a customer running a provider hosted app and in Sharepoint 2013. Things have been working fine but recently they keep experiencing an issue where the all the app parts on the page show the following error message. Does anyone have an idea what
could be causing this problem and how I can fix it? The Sharepoint site and provider hosted app site are running on a Server 2008 R2 box with IIS 7.5.
Server Error in '/Test.Sharepoint.App' Application.
The remote server returned an error: (429) Too Many Requests.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The remote server returned an error: (429) Too Many Requests.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The remote server returned an error: (429) Too Many Requests.]
System.Net.HttpWebRequest.GetResponse() +8527180
Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() +58
Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb) +975
Test.Sharepoint.AppWeb.Pages.LatestAnnouncement.GetLatestAnnouncement(Boolean showFullText) +610
Test.Sharepoint.AppWeb.Pages.LatestAnnouncement.Page_Load(Object sender, EventArgs e) +764
System.Web.UI.Control.LoadRecursive() +71
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3178
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18034
Impreza Software Development

Hi GuYumming,
I have checked the Sharepoint site using Fiddler and my X-SharePointHealthScore stays consistently on 1, I have even refreshed the site and had the "(429) Too Many Requests" error happen right in front of me whilst Fiddler is running and when I look at the
200 response for the Sharepoint site it is still showing "X-SharePointHealthScore: 1".
I assume because of this I do not need to make any of the changes suggested in your article above?
I have also been through the ULS logs and found the following 3 log entries that appear to relate to the issue but they do not really mean much to me so I am hoping that you can help:
Begin CSOM Request ManagedThreadId=59, NativeThreadId=12476
SPResourceTally(ClientServiceRequestDuration) value 1 + 150425 > 150000
ResourceBudgetExceeded, sending throttled status code. Exception=Microsoft.SharePoint.SPResourceBudgetExceededException: ResourceBudgetExceeded     at Microsoft.SharePoint.SPResourceTally.Check(Int32 value)
at Microsoft.SharePoint.SPAggregateResourceTally.Check(SPResourceKind kind, Int32 value)     at Microsoft.SharePoint.Client.SPClientServiceHost.OnBeginRequest()
Impreza Software Development

"couldn't resolve host name" error message

I have a new Z30 with the latest OS update installed and can’t connect to several Wi-Fi locations because of error message ‘couldn’t resolve host name’. Is there a fix to this as it seems to be an issue with BB and no other type of devices?

Assuming you're connecting via wifi, this would suggest your wifi connection is failing somewhere along the way.
Occasionally, my PB's wifi icon shows green and looks like it's working, but if I turn the PB wifi off and back on, it usually fixes the problem. You could also try rebooting the PB if resetting the wifi doesnt work.
If these things don't correct the problem, then check your wifi router (reboot it if necessary) and maybe check your internet connection with another device, ie home computer or whatever to make sure you're not having service issues.

Just updated to 3.6.8. Now can't navigate reliably. Frequently get this error message: "Server Error in '/' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies th

Just updated to 3.6.8. Now can't navigate reliably. Frequently get this error message: "Server Error in '/' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster." Pending fix of this glitch, is there a way to go back to previous version of Firefox that worked perfectly well?
== URL of affected sites ==
http://www.americanleather.com/ComfortSleeper/Madison.aspx?page=2

Hi JH,
According to your description, my understanding is that you got an error when you deleted columns in SharePoint 2010.
Please add the following string in <system.web> section of your web.config file :
<pages validateRequest="false" enableEventValidation="false" viewStateEncryptionMode ="Never" />
Note: before changing web.config, please make a backup for the file.
Here are some similar posts for you to take a look at:
http://forums.asp.net/p/1355367/2778642.aspx
http://forums.asp.net/t/1166634.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error message: $host does not have a method 'resetDataPermsCheck'

LiveCycle Designer 8.05.
I am trying to reset the data in a subform. It is working great in certain subforms in my form. However, some of the code is as follows:
if (form1.P1.docSF.new_revision.rawValue == "0") {
// do something
} else {
xfa.host.resetData("form1.P1.newdoc_numberSF");
With this code, I receive an error (in the Warnings panel) that says "$host does not have a method 'resetDataPermsCheck'", yet the subform fields still reset properly. If I move the "xfa.host.resetData..." line out of the "else" section into the "if" section, the error message goes away.
Any idea what might be going on?

Welcome to the forum.
Could someone point to the cause of the error.Could you please mention the complete error message ( the ORA-xxxxx code ) and your database version ( the result of: select * from v$version; )

Xfa.host.resetData() error message

Some users, but not all, are getting an error message "Please select the Client's locale" when they press a button that has a single line of code on its click event: xfa.host.resetData(). The button has the default locale selected in its properties. The form has had the Reader extensions added, but the same thing is happening on the non-extended form.
The users are using Acrobat Reader 7.0.5. Users with Reader 9 or Acrobat Pro 9 are not having the same issue. I could change the button's locale to English (USA), but that doesn't fix it (I tried) and all the other buttons are set to default locale and work fine.
This is an 11th hour glitch -- we're supposed to distribute the form tomorrow if at all possible and this is the first time I've seen this.
Any help greatly appreciated!

There is a message defined in the mandatory field (State). I am wondering if they have not selected a state and this message is getting displayed (have you tied this field to any others in a calculation)? Just to confirm, change the text of the message and see if it happens again with the new message. It is not happening to me and I am using Acrobat 9 .... also see which version of Acrobat/Reader the troubled users are using.

Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device "Kitchen". The host cannot be reached." Has anyone else had this?

Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device “Kitchen”. The host cannot be reached." Has anyone else had this problem

I'm having the same issue. Haven't found a workaround. I use a main TimeCapsule as my main router, also have another TimeCapsule that extends the network, three Airport Express and an AppleTV. For whatever reason, the two AirportExpress that I have in a different rooms cut out. I only have 600 square foot apartment so it's not that big, the signal should be strong enough. Airport Utilitiy reports the signal strength to be strong on all devices.
I'm using all new equipment, a new MacPro for my music, new TimeCapsules, new Airport Express, new everything with the latest Yosemite software. Very frustrating. My Airplay used to work very nice and now I'm constantly having issues and restarting my network. I did a fresh install of all my software on my MacPro when I got it in January so it's not as if it's an old machine with old software, everything is new within the last 6 months.
The only workaround I found so far is to unplug the devices and to plug them back in. Since upgrading to Yosemite, I'm restarting my Airport Express at least twice a week. Very annoying.

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

Hi roddy,
thanks for responding. I read your link, looked at my settings and they were all correct. I tried to do a republish and got this message: The requested URL /childrenandcaring/index.html was not found on this server.
When I type the address in the address bar, I go to the site and the page says: This is the new site childrenandcaring.com
Any other ideas?
Suzanne

CS Host Error Message !

Similar Messages

Maybe you are looking for