/cs/Satellite not accessible - 400

I have installed WCS -Sites 11.1.1.8 on Windows with AVISports sample site. I am not able to view any existing articles. On click of any article i am seeing
HTTP Status 400 - Content Server could not process the request
http://localhost:8001/cs/Satellite?pageName=XXX
Do i need to make any additional configuration?

Hi vgk2716,
Usually when I get a 400 status it's because I'm trying to access a HTTP URL over an SSL port. Could that be what's happening here? Make sure 8001 is the HTTP port of your managed server, and Sites is deployed on the /cs context.
And as Pedro said, check the logs.
Kind regards,
Stephan.

Similar Messages

Re: Satellite A300 - Partition D is not accessible

I have having trouble opening or playing anything in the CD/DVD player.
I am getting the messages either:
D: application not found, or
D: is not accessible. The request could not be performed because of an I/O device error.
Please help

Hi,
Sounds like the ODD filter in the registry may be invalid. Have a look at this hotfix: http://support.microsoft.com/kb/982116
Another thing to try is get a microfiber cloth and gently wipe the optical lens to remove any dust.
If still no good, it may be a hardware problem with the drive itself.

Error message appears D:// is not accessible on Satellite L series

Having problems when loading dvd to write getting error message D:// is not accessible. Cannot find any help in the user manual.
Is there something that I am doing wrong? Do I need to load different drivers?
I have tried both DVD-R & DVD+R discs.

Hello guys
For me it is pretty stupid to write about problem and not write which notebook model you have. Do you have newer notebook models or some oldies? Do you use some CD/DVD burning applications and which one?
Please try to start recovery procedure to see if the drive can read recovery media. Please post the results.

Can;t write to CD/DVD; Drive not accessible/ incorrect function

When I try to copy files and select the D drive, the error message says the drive is not accessible, incorrect function. I have a Satellite P105-S6084. This is an old laptop still running Windows XP. I don't burn CDs very often but I need to back up some files before switching to a new computer. I had this problem years ago (when I first acquired it) and someone told me how to fix it by changing a setting. My recollection from years ago is that I had to find the correct tab and check or uncheck a certain box. But I've tried hunting all over the control panel, using the help dialogs, etc. and I just can't find anything that looks familiar. After I originally fixed the problem and for years thereafter, whenever I powered on the laptop, I received a window asking me if I wanted to enable (or maybe disable) a certain function...sorry, I just can't remember the exact details...and I always answered a certain way. My sister used my laptop awhile back and I think she may have answered the question the other (i.e., wrong) way and essentially "undid" whatever the original fix was (because I no longer get that message). Any ideas would be appreciated. I had a little problem today and although my laptop seems fine right now, I feel like I'm on borrowed time and really need to back up some files.

Satellite P105-S6084
Try Microsoft's fix here.
Also, it's likely your drive has failed. the optical drive is the most likely mechanical component to fail.

New location, why is my Gmail account not accessible (off-line)

I have been using Earthinklin and Gmail, on a 2011 iMac 21.5" and I have several Google accounts through non-profit organizations for drives and mail (although I don't use the mail). Today I traveled with my iMac about 400 miles and set up to work, but my Gmail is not accessible (off-line), but my wife's account is working fine, and in fact mail defaults to using her account (we share everything). I have made sure my original Gmail mail account is the one that I'm signed into with this iMac, but Apple mail still says that it is inaccessible. I'm using a local wifi account to access the internet. Is there a nuance about having multiple Gmail accounts and/or moving my iMac to a new network that is confusing my preferences and/or logins?

azmyth wrote:
I have a family share plan, with 2 lines.
one is stripped to nothing because its no longer being used, and the primary line which is my phone.. has unlimited data etc.
I got a text from verizon saying i was eligible to upgrade at a discount, and i got a phone call from a local rep telling me the same.
I logged into my account online, and it shows that I am eligible for an upgrade at discount pricing, or if i wait til november I can get an additional loyalty discount. My trackball on my blackberry is dead, and really want a droid so I was gonna go ahead and upgrade now,
according to the site, when i choose to upgrade my primary line.. the thunderbolt is 199.99 with 2 year extension and the Droid 2 incredible is 149.99 with extension.
I called the rep back to double check that this was true, and ask a few other questions before i went to the store today and he told me that it was 249.99 for the TB and 199.99 for the Incredible 2. I tried to explain to him that i was not a new customer, and that the website said i was eligible to upgrade. He told me he could not sell it to me for that price... what the heck? I don't want to wait to have it mailed but i also don't want to pay 50.00 extra for something I'm am staring at that says i can get it cheaper. He sounded clueless.
you are getting another discount for buying online, its often like this

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Database table 'e' is not accessible

Hi all,
like many others in the web I'm having problems deploying CMP Beans on BEA. I'm using Weblogic 8.1 and
get the following error message:
"[EJB:011076]Unable to deploy the EJB 'B' because the database table 'b' is not accessible. Please ensure that this table exists and is accessible."
After a lot of research I understand the problem now. Weblogic is checking the cmp-fields at deployment time using something like "SELECT xx1, xx2, xxx3 FROM ttt1 WHERE 1 = 0". Some databases have no problem with such a select. My Solid database unfortunately does a full table scan on it. Having only some rows in the table b there is no problem at all, but I have more than 500.000 entries. :-(
My question: Is there a workaround? Can I somewhere specify the SQL - command for checking mapped cmp-fields? Or can I disable the check somehow?
I think it is a very annoying problem, many users out there have.
Thanx in advance
Robert

Robert Jung wrote:
Hi all,
like many others in the web I'm having problems deploying CMP Beans on BEA. I'm using Weblogic 8.1 and
get the following error message:
"[EJB:011076]Unable to deploy the EJB 'B' because the database table 'b' is not accessible.Please ensure that this table exists and is accessible."
>
After a lot of research I understand the problem now. Weblogic is checking the cmp-fieldsat deployment time using something like "SELECT xx1, xx2, xxx3 FROM ttt1 WHERE 1 = 0".
Some databases have no problem with such a select. My Solid database unfortunately does
a full table scan on it. Having only some rows in the table b there is no problem at all,
but I have more than 500.000 entries. :-(
>
My question: Is there a workaround? Can I somewhere specify the SQL - command for checkingmapped cmp-fields? Or can I disable the check somehow?
I think it is a very annoying problem, many users out there have.Hi. All commercial quality DBMSes I know, are smart enough to evaluate constant search
criteria, and not to access all the rows if it's a-priori known that no rows will
qualify. I would ask 'Solid' for a fix.
However, you can generate our EJBs with the option of retaining the generated
JDBC code, which you could alter and recompile for your use. You might be able to
substitute some DatabaseMetaData call to getTableColumns() to get the same info...
Joe
Thanx in advance
Robert

The Secure Store Service application Secure Store Service Proxy is not accessible

I am working on setting up a new SharePoint 2013 Farm for our external web site which is currently running on 2010 SharePoint. Because this is an External Website for our organization we have an internally available Publishing Site and there is an Web App
Extension to provide Anon Access to users using the www address. Currently I am doing everything on a single server for testing with HOSTS entries to loop back so I can test with real host headers and not impact the 2010 prod environment. We will be setting
up 2 more WFEs with a NLB before moving this into prod but it isn't there yet. We brought the Site Collection Databases over but are still running in 2010 mode for now.
I migrated a copy of the Secure Store Database over from 2010 and had it put on the 2013 Farm's Database Server. Set up Secure Store and the Secure Store Proxy. I went into the Secure Store Proxy in CA and refreshed the Key with the proper Pass Phrase. After
doing that I could see the Target Application IDs listed. Everything was looking good so I went off to test. If I am on the publishing site I can go to a page that has the solution on it and it operates as expected. It does a query to a non SharePoint database
and returns information filtered based on the search parameters. The only odd thing I see is if I click on the "Site Actions" I get a message "An error has occurred with the data fetch. Please refresh page and retry." Need to look into
that more but it only happens on pages that have these solutions. Maybe a clue. If I go to the Anonymous Access page (www......) and try and use the solution, it immediately (way too quick to appear like it is doing anything) comes back with "The security
token request cannot be completed."
If I dig through the usage logs I am finding the following.
The Secure Store Service application Secure Store Service Proxy is not accessible. The full exception text is: The security token request cannot be completed.
Unexpected exception from endpoint address : https://[Servername]:32844/4e87fd3aabb640fb8cc3ed52188cf5c0/SecureStoreService.svc/https
Logging unknown/unexpected client side exception: InvalidOperationException. This will cause this application server to be removed from the load balancer queue. Exception: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri) at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress
address, Uri via) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.GetChannel(Uri address) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName,
Boolean validateCanary, ExecuteDelegate`1 operation).
Initially I was fighting a firewall issue because it wasn't working (different errors) on both sides. Had Network Engineers open firewall ports needed and now it works on the publishing side. Still the same error on the Anon side. I suspect I have missed
something when it comes to configuring the Secure Store to allow access to anonymous connections.
Let me know if you need any more information but that should paint a pretty good picture as to how things are set up.
Thanks for any help on this one. Searches haven't found much that has helped so far.

Hi Sennister,
I recommend to verify the things below:
Did this issue occur with all the pages in the anonymous side?
Check if the Claims to Windows Token Service is started.
Change the <identity impersonate="true" /> in the web.config to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

An error The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered after launching a ps1 script from cmd file.

I'm trying to load sharepoint script from *.cmd file.
I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
My cmd file is:
Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
My sharepoint file 1.ps1 is:
$snapin="Microsoft.SharePoint.PowerShell"
if ($action -eq $null -or $action -eq '')
{<br />
# Action by default is complete uninstallation.
$action='uninstall'
$uninstall = $true
else
$action = $action.ToLower()
switch($action)
{ $_ -eq "uninstall" } { $uninstall = $true; break }
{ $_ -eq "removesolution" } { $removeSolution = $true; break }
{ $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
{ $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
Check the Sharepoint snapin availability.
if (Get-PSSnapin $snapin -ea "silentlycontinue")
Write-Host "PS snapin $snapin is loaded."
elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
Write-Host "PS snapin $snapin is registered."
Add-PSSnapin $snapin
Write-Host "PS snapin $snapin is loaded."
else
Write-Host -f Red "Error: PS snapin $snapin is not found."
Exit -1
$url = "http://pc1/sites/GroupWork/"
$site= new-Object Microsoft.SharePoint.SPSite($url )
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
$site.Dispose()
The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
PS C:\2> .\1.ps1
PS snapin Microsoft.SharePoint.PowerShell is loaded.
GLOBAL#0 Global template
STS#0 Team Site
STS#1 Blank Site
STS#2 Document Workspace
MPS#0 Basic Meeting Workspace
MPS#1 Blank Meeting Workspace
MPS#2 Decision Meeting Workspace
MPS#3 Social Meeting Workspace
MPS#4 Multipage Meeting Workspace
CENTRALADMIN#0 Central Admin Site
WIKI#0 Wiki Site
BLOG#0 Blog
SGS#0 Group Work Site
TENANTADMIN#0 Tenant Admin Site
{248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
{95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
{7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
PS C:\2>
I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
the cmd file but without success.
My PowerShell has version 2.0:
PS C:\2> $psversiontable
Name Value
CLRVersion 2.0.50727.5477
BuildVersion 6.1.7601.17514
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
After launching the script from 1.cmd file i get an errors:
C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
PS snapin Microsoft.SharePoint.PowerShell is registered.
The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
tered.
Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
ration.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
No xml configuration files loaded.
Unable to register core product cmdlets.
Could not read the Types files in the folder CONFIG\PowerShell\types.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
"No Types files Found."
Could not read the Format file in the folder CONFIG\PowerShell\format.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
No Format files Found.
PS snapin Microsoft.SharePoint.PowerShell is loaded.
New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
on at http://Pc1/sites/GroupWork/ could not be found. Verify t
hat you have typed the URL correctly. If the URL should be serving existing con
tent, the system administrator may need to add a new request URL mapping to the
intended application."
At C:\2\1.ps1:48 char:18
+ $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
+ CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
tionException
+ FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
Shell.Commands.NewObjectCommand
Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.

I have an answer for my problem: for solving a problem I've made several steps:
1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
This user has been added as farm administrator in the wizard.
This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
the Management Shell of Sharepoint.
3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
(my main account) in the Config database
4. Run CMD file only from Start->Run menu.
runas /user:Domain1\UserAccount1 "C:\1.cmd".
Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
Thanks all for help.

The selected remote nodes 'node3' are not accessible

Hello,
I removed node3 from 2 node RAC Cluster.
After this I have re-add this node to my RAC. I added without any problem to CRS but I have a problem with script addNode.sh (/u01/app/oracle/product/crs/oui/bin).
I have to separate homes for ORACLE_HOME and ASM_HOME, so I need to run this script twice for each ORACLE_HOME.
I run addNode.sh from one of the cluster nodes (node1), if I run:
export ORACLE_HOME=/u01/app/oracle/product/11.1.0/asm
cd $ORACLE_HOME/oui/bin
./addNode.sh -silent CLUSTER_NEW_NODES={node3} CLUSTER_NEW_PRIVATE_NODE_NAMES={node3-priv} CLUSTER_NEW_VIRTUAL_HOSTNAMES={node3-vip}
I got the following error:
Performing tests to see whether nodes node2,node3 are available
............................................................SEVERE:The selected remote nodes 'node3' are not accessible.
... 100% Done.
I reviewed logs located in /u01/app/oraInventory/logs I found
Status of node 'node3':
null
The virtual host name 'node3-vip' for node 'node3' is already in use.
I checked crs_stat from $ORA_CRS_HOME, but all applications (ons, gsd, vip) and targets are ONLINE. I tried to run vipca -nodelist node1,node2,node3 and updated a configuration. I checked /etc/hosts, connection via SSH between all hosts belonging to RAC: node1, node1-vip, node1-priv etc. Everything looks like fine, so I have no idea what caused this problem.
Software which I used:
Linux: UNL 5.4 x86_64
11g Release 11.1.0.7.0 - 64bit, Oracle Clusterware
Thank you for your answer,
Best Regards,
Edited by: user4924714 on 2010-02-15 07:50

Hi,
Thanks for your reply.
I am running addNode.sh from node which already exist in the Rac Cluster. I tried on node1, node2 but the resulat are the same.
Best regards,

My Macbook Air does not show up on my network to any of my other computers, Other computers on my network appear and disappear, some shared folders are not accessible

My Macbook Air with Lion does not show up on my network to any of my other computers (PC's) , even though it is connected to my wifi and does access the Internet. In addition, my other computers sometimes show up in Finder and sometimes they're not there. Sometimes they do show in Finder and when I click on them, I get "Connection Failed", other times, they connect. Also some shared folders on those other computers, which are PC's are not accessible, even though fully shared. My network is Apple Airport Extreme and works perfectly otherwise, including all PC's being able to see each other. Help would be much appreciated

I got the same problem. I want to access my shared folder on my home windows7 from my MBA. Tried many suggestions on the web but all to no avail. I thought that should be very trivial. Maybe a Lion bug?

Site not accessible from the Load balanced web front end server - sharepoint 2010

I have a production environment with 2 WFE's(sp-wfe1 & sp-wfe2), 2 APP's and 2 SQL clustered VM's.
2 WFE's are load balanced using hardware load balancer.
An A-Record(PORTAL) is created in DNS for the virtual IP of the load balancer which points to the 2 WFE's.
A web application is created on the WFE's on port 80.
alternative access mapping is configured and the load balanced record "http://PORTAL" is used under the default zone.
Under IIS I have edited the bindings for the sharepoint site at port 80 and added the HOSTNAME as PORTAL.
Result: The site is accessible from outside the server and works fine.
ISSUE: The site is not accessible within the WFE's(sp-wfe1 & sp-wfe2).
When I browse the site from the WFE's server it ask for the credentials and when I enter the credentials and click OK it ask the credentials again and again and in the end displays a blank page.
Kindly help me in this issue because I am clueless and couldn't find anything helpful on the internet.
Regards,
Mudassar
MADDY-DEV Forum answers from Microsoft Forum

Loop back check.
http://www.harbar.net/archive/2009/07/02/disableloopbackcheck-amp-sharepoint-what-every-admin-and-developer-should-know.aspx

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible.

Server Error in '/' Application.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846887
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +4860189
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +90
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +342
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +221
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +189
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +31
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +433
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +499
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117
System.Data.SqlClient.SqlConnection.Open() +122
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +31
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +112
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +287
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +92
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1297
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +19
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +142
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +73
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +72
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +44
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +842
Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082

On what website/link did you received this error message ??

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible or something similar. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible access denied. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Apple has really crappy NTFS read-only that does not always work. And it is probably a licensing issue.
Paragon Software is constantly being updated and supported with their NTFS for Mac OS X - they also have an HFS+ driver for Windows that works - Apple's HFS+ read-only driver for Boot Camp / Windows does not.
I keep seeing problems and lack of support for MacFUSE, that could change.
http://www.bing.com/search?q=ntfs+for+mac

/cs/Satellite not accessible - 400

Similar Messages

Maybe you are looking for