CS service order budget can't control goods issue from stock?

Hi experts,
I set budget to a service order(CS), it can control Purchase order from service order, however it can't control the good issue from stock(type "L") ! Is it the setting problem? how to deal with it?
best regards
lance

1st
If you actually bothered to read my post, you would see that I decided to change for the X220 after I saw it in the flesh and realised how much close it was to the X121s dimensions. If lenovo wishes this not to happen very often, they should bother do something about the fact that there is no Lenovo dealership/agent/representative in Oxford.
2nd.
If Lenovo lists paypal as payment method, they should honour it. Otherwise, do not list it at all.
3rd.
If lenovo says that I can cancel the day I ordered with no implication, they should also honour this. Not ignore my e-mails (contrary to the terms & conditions stated) and ship it so I can perhaps keep it. That's not good business practice. That's playing dumb.
They had 5 days to cancel, they prefered to wait for the item to be produced/stocked so that they can ship it to a small hamlet in Oxfordshire (half the way around the globe) so I can send it back. So yeah, this little laptop will circumvent the Earth.
If this is not wasteful, then what is?
As far as I am concerned, it took me 10 telephone calls and to DR just to get the cancellation e-mail which should be sent immediately.
If you do not value your time, it is your problem, not mine.
I will not be buying a Mac either as I do not like the product, but the difference in service couldn't be more stark.
All the best,
Sav.

Similar Messages

Item of sales order is so repeated post goods issue that stock is negative

dear expert:
the stock value of sales order is negative ,because the goods is post twice,i donn't know what' cause of question .in schedule line of sales order ,order quantity is 1, confirmed qty 1,deliveried qty :2.
so mska-KALAB is -1.
please help me analyse it .
best regards

Check your other thread on the same subject
[sales order is deliveried but stock is negative |sales order is deliveried but stock is negative;
thanks
G. Lakshmipathi

How can I control an iPad from a touch screen which is mirroring the iPad screen

How can I control an iPad from a touch screen which is mirroring the iPad screen.
This is a very important application for disability students who wish to use iPad apps but do not have sufficient fine motor skills to use the small screen of an iPad but could use a large format display touch screen.
There must be a way.?????????? Help!!
Peter Niass
[email protected]

Have a look here
http://www.macstories.net/iphone/the-external-touchscreen-that-can-control-an-ip hone/

Can I control cinema displays from pc?

If I buy a 27 Cinema disply, can I control screen settings from a pc running win7 ultimate? since the display has no control buttons!

Not with Apple Remote Desktop, no. So there will be no "installer package" that you would need to create; installer packages only apply when you want to use ARD to install software on another Mac.
Mac OS X has a VNC server built in, so all you would need is a VNC client on Windows. There are many; which ones will work best I can't say since I don't use them. If you search this or the Mac OS X Networking forum for "VNC", you'll probably find suggestions.

I can't control the volume from my iphone 4 headset. What can I do???

I can't control the volume from my iphone 4 headset. What can I do???

Go to Settings > Sounds. There is this option call Change With Buttons. Is it On or Off?

HT1338 How can i control my iPad from my macbook?

How can i control my iPad from my macbook?

The iPhone has a "remote" app that lets you control Keynote on a Mac, but not on another iOS device (iPhone/iPad/iPod Touch).
There are some apps that let you control limited content on another iOS device - but the content has to be within the app. You might check out SyncPad - perhaps you can import the presentation into it and then control it on the iPad.

How can Transformation control be used from an EJB Project?

I want to perform some data transformation directly from within the EJBs. Can Transformation
control be used from an EJB Project? How?

William, thanks for the reply.
I bought this drive module from a private party and was surprised to find out what it was. At first I thought it was just Apple's way of protecting the drive during shipping.
I own it and will probably have an hard time returning it. It was advertised as a 750GB Seagate SATA ES hard drive. The price was very reasonable, especially if I was buying it as a Drive Module. So if I can sell it great, if not I want to use the drive.
How can I tell if this is a Xserve RAID module or Drive Module? The box just says Apple Drive Module no mention of RAID. The Apple model # is MA504G/A, and it say Apple Drive Module 750GB SATA (Intel). On the hard drive itself it says Seagate Barracuda ES 750Gbytes.
If this is just the Drive Module and I can use it in my Mac Pro, does it just unplug or unscrew out of the housing it's in and plug into the Mac Pro like a normal drive? And then can it be used like a normal drive to set up a RAID in the Mac Pro with a duplicate bare drive? It's sealed and I don't want to open it until I know I can use it.
Sorry for all the questions but I know enough to be dangerous and this this has me stumped.

Goods Issue from ECP with Batch Management

Hi experts,
I would like to make a Goods Issue from Execution Services in Easy Cost Planning. But the material has Batch Management active and I am not able to inform the batch.
I know I can make the same movement from MB1B but I would like to do it from the Easy Cost Planning environment.
Is it possible?
Thanks

mforman wrote:
We already have the batch and deactivating batch management has no sense.
> We need to be able to inform the batch when we are making the goods issue from the Execution Services.
Dear,
I think you can solve this through your Characteristics in the Costing Model. In the Characteristic Edit Screen, Goto Values tab, Select your material and click on Object Dependecies Button, see if you can use or create a new Dependency for your material for picking or suggesting batch number.
Hope this helps...
Thanks,
Ranganatha. Patnala
Edited by: Ranganatha Rao.P on Oct 14, 2011 2:59 PM

About goods issue from vendor consignment stock

Hi, I meet some issue needs your help!
The outbound delivery needs to post goods issue from vendor consigment stock directly. then how to choose which vendor's
stock for this delivery base on the actual process?
thanks
Best Regards,
Rory

Hi
In R3 it is not possible
If say material X is 100 units lies in your premises the vendor consignment stocks (the vendor property lying in your premises ) and out of that 100 units if you are making a sales order and then a goods issue means it is not possible
To sell that material you need to make it your own stock ( that is transfer from vendor consignment to your own ) as good as buying that stocks and then sell it
But the same scenario is possible in IS retail
For this iS retail server is reqd
In Retail you can play with vendor consignment stocks as much as possible without making our own stocks
You can search SAP library regarding the settings of the same
http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/frameset.htm
Regards
Raja

Restrict goods issue if stock on posting date is zero

Requirement:
Current Inventory period : July 2011
Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B report)
I upload stock of material or GRN occur on 31.07.2011. Say Quantity u2013 100
Now stock as on 31.07.2011 is 100 in MB5B
Still, Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B)
Now, If I do goods issue of a material quantity 100 on 15.07.2011. System allows goods issue. though opening and closing stock as on 15.07.2011 is zero.
After goods issue transaction if I check stock of material on any date between 16.07.2011 to 30.07.2011 , The opening stock and closing stock shows negative.
I want to restrict goods issue if stock on posting date is zero or less then stock available on posting date.
Please suggest

Hi,
This is not the way SAP is designed. As the previous speakers wrote (and as you noticed yourself), SAP maintains stock figures in the database per month rather than per day. MB5B makes complex calculations in order to find out how much stock you had on a specific date - as you probably noticed on the response time. Performing such calculations every time you do a GI would be unfeasibly heavy task for the system - remember there are organisations that perform hundreds of inventory movements a minute!
An alternative solution I suppose would be to maintain the daily stock figures in the database. This would make the finding of the stock figure very quick, but on the other hand, the maintenance of such table would be unfeasible - if you post today a GI on say July 1st, you would need to calculate 36 stock figures and update 36 database records!
Hope this explains the technical issue.
BR
Raf

One SO but I would like Post Goods Issue from different Storage Locations?

Dear All,
Pls help me solve this issue below:
I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
- U1 can Post Goods Issue from storage location A only (but cannot from B, C)
- U2 can Post Goods Issue from storage location B only (but cannot from A, C)
- U3 can Post Goods Issue from storage location C only (but cannot from A, B)
How can I assign the Authorization for users?
How can I create Outbound Delivery:
a. 1 SO --> 1 outbound delivery --> Post GI 3 times
b. 1 SO --> 3 outbound delivery --> Post GI
Thank you very much for your support
Cao Huy.

Hi Senthils,
Pls see my comment below:
For Authorization check for storage Location
1. GO to the following Menu path
Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
Here you have activate authorization tick for storage location and plant combination.
--> Done
2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
for each user.
--> Done
There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
How can user 01 Post GI from only location A in this outbound???
And then user 02 will Post GI from only location B in this outbound,
user 03 will Post GI from only location C in this outbound.
Thanks
Cao Huy

Good issue from delivery not possible due to credit block

Hi gurus,
Please help me on this issue.while doing PGI for the delivery i am getting the following error message."Good issue from delivery not possible due to credit block "The simple credit check is assigned for the sales document type.iam doing free of charge delivery.
What are all the possible ways to get such error
Regards
Vis

but system behavior is not set in transaction OVA8, means combination of risk categories and 03 is not set.
I think you are checking the wrong risk category, please check once again the Risk category of the payer in FD32, what is it assigned and also check OVA8 with this risk category.
If you find the above settings are correct as per your observation, try to create a fresh cycle so that you will get the correct results as per your settings in delivery.
In your case what you are saying is correct, may be the risk category is changed recently this you can check the change log of the payer customer in FD32( if any change takes place).
If possible try to past the screen shot of both.
thanks,
srinu.

DESADV is not generated during Goods issue from VT02N.

Hello,
DESADV is generating during goods issue from VL02N.
But DESADV is not generated during Goods issue from VT02N.
Any idea what was missing?
I maintained the variant of RV56ABST for Delivery message with output type LAVA and Medium 6 (EDI).
Thanks,
Venkat

I got reply from SAP. It is as follows:
Please goto tcode VL10CUC. For Profile 2000, please check whether
indicator "No OutputDet." is flagged.
Please unflag that indicator and then retest.
Please read note 1410599 for more inforamtion.
Thanks,
Venkat.

Standard Idoc for Goods Issue from MIGO and standard BADI to do the MIGO-GI

Hi Gurus
What is the standard IDoc for Goods Issue from MIGIO and standard BADI that takes care of Goods Issue from MIGO?
Thanks

BADI :
MB_MIGO_ITEM_BADI
MB_MIGO_BADI
Idocs:
/ISDFPS/GOODSMVT_SAPCREATE01
/CWM/MBGMCR01

Can not "post goods issue" against Vendor Return PO.

Hello Friends,
**I have a problem During the "Vendor Return Through Purchase Order" Process.I crated a PO with return flag set.**
**Then 1) Created a outbound delivery against purchase order (VL10B)**
2) Created a Billing (VF01)**
3) Next is VL02N - While doing the "post goods issue" where i got following error message "Update control of movement type is incorrect (entry 161 X X _ L)"**
Its shows setting related to Mvt 161 to update .I check allowed transaction with respect to 161....VL02N is there .....But don't understand what change needed in "Update control /WM movement type is needed.....Pls suggest any solution........Thanx**
Regards
Sachin
*Error Messafe -
Update control of movement type is incorrect (entry 161 X X _ L)
Message no. M7226
Diagnosis
The system could not find entry 161 X X _ L in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

Hi Antony,
Thanx for reply.
1) I had assign delivery Type (RL -Returns Purchase order) to my document type. Assingnment of delivery type thru
spro>MM->purchasing>purchase order->set up stock transport order--->assign delivery type and checking rule....
2) MvT - 161----If i modify 161 wrt to GR Returns what modification is needed ? ......
3) VOV6 - I had checked it ,maintain it, but that is not relavant in my case....
4) During PGI system pick 161 as defalult MvT.....can we change it t0 122 ? but how...??
still the problem is there......
Sachin

CS service order budget can't control goods issue from stock?

Similar Messages

Maybe you are looking for