Cs01 lsmw steps required
dear sir
i am new to LSMW
i want to make the lsmw of bom for t code cs01
i have recorded and generated program
i have created two source structures one for header and one is for item level
item level is sublevel of header source structure.
i have created fields also for two structures
after this step i don't know how to link two source structures to one program and how to create the loop
how to spicify the file (loading file in txt format which is to be only one) etc
so please give some step wise procedures with one example for bom creation
also please forward any screenshots available wrt lsmw of cs01 to [email protected]
thanking you
srinivas
Hi Srinivas,
Go to this link LSMW is described step by step with screens here. Its one and the same for all.
<a href="http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc">step by step lsmw</a>
If any further assistance needed please write bk to me.
Reward points if useful,
Aleem.
Similar Messages
-
hai friends,
How to create lsmw step by step full creation ( including Maintain Object Attributes ,
Maintain Source Structures
Maintain Source Fields
Maintain Structure Relations
Maintain Field Mapping and Conv
Maintain Fixed Values, Translat )
please send the follwing mail id [email protected]
Regards,
S.SivaDear Siva kumar,
SAP Data Migration with LSMW
No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
For those with the older SAP version (4.7 and below), the data migration programs might not have been pre-loaded.
You can download the LSMW at no cost from SAPNet under Services, SAP Methodology and Tools, category Tools.
If you are an existing SAP customer with an OSS ID, you can access the SAP Service Marketplace to download the LSWM for your Basis teams to install to your SAP system: http://service.sap.com/lsmw
The LSM Workbench carries out the following tasks:
Reads the transfer data from one or more files (for example, spreadsheets, sequential files etc.)
Converts the data from the source format into the target format
Note that with background processing, the input file must not be located in the presentation server. Access to presentation server files is only possible when you are working online.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details -
Lsmw step by step procedure using batch input method
hi,
lsmw step by step procedure using batch input methodStep-by-Step Guide for using BAPI in LSMW
Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed
It is given in screen shot.
http://www.****************
http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html
http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
Reward points if useful. -
Steps required to enable webservice calls in SAP ECC 6.0
Hi Friends,
I'm working on XI, more on part of webservices and as I dont have a good knowledge on BASIS part, I would like to know the steps required to enable the webservice calls in SAP ECC 6.0.
Blogs/documents could be helpful.
Thanks in advanceduplicate thread
[Required infrastructure to enable web service calls in SAP ECC 6.0 system; -
Minimum steps required for Change Management and Incident management
Hello experts,
Does anyone have a check list of the absolute minimum steps required for getting Change Management and Incident management functioning in Solution Manager.
I just need it to function with creating changes and incidents and be able to assign them, change their status and close them.
The purpose is to get an idea if this is something for us to use. If we then find it useable, then we will go for a full scale implementation using official guides, education etc.
I just need an absolute minimum guide for demonstrating the functions, and if you guys have any recommendations, things we should pay special attention to or other experiences feel free to tell me.
Thanks in advance.
Regards,
KennethHi,
There are a number of Blogs in the SDN about Charm and ServiceDesk, explaining first steps and more.
Check these to start:
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
The Complete ChaRM Solution
Change Request Management scenario: Usual questions and known errors
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
Regards,
Jan -
Steps required for Sender IDOC adapter PI 7.0
Hi all,
My basis guy has installed SAP EHP1 for PI7.0 for handling the idoc packaging(sending idocs in packs)...
Please can any one let me know the further settings required in PI after it has been installed...
and even when i open the sender IDOC in comminication channel in ID i am able to see only 3 options
Transport prtocol, message protocol,Adapter engine...
But i am not able to see the other fields...
Can any one help me...
Thanks and Regards,
sridharHi Michael,
Thanks for your reply..
I searched for the docs in many ways.. but couldnt find proper information regarding the IDOC packaging with sender IDOC adapter and steps required...
Could you please let me know if i can get the book in Singapore since our project, because almost 90% interfaces are related to IDOC...
And request you if you can share me the steps required in PI to confirgure IDOC packaging for EHP1...
Regards,
Sridhar Reddy
Edited by: sridhar reddy kondam on Jun 15, 2009 4:35 AM -
Hi ,
can anyone expalin LSMW step by step with screen shotsand example
Thanx,
Bhaktihttp://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html
Regards,
Subramanian -
BPM steps required...
Idoc to ,Proxy and JMS(2 receivers,JMS 1 and JMS2) scenario....totally 3 receivers
JMS 2 has to wait till JMS1 reaches receiver....then JMS2 should reach receiver..
what are the steps i should put in BPM.....
Please remember that there is no need logic for PROXY...no need of waiti time aswell...only JMS2 receivers required....
can some one tell me step by step, what are the steps required to do so...Hi Harsha
You can correlate JMS messages with or without BPM.
Use these
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8060448a-e56e-2910-f588-9af459e7ce21
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b028f6f6-7da5-2a10-19bd-cf322cf5ae7b
This will help you getting response from JMS1
Thanks
Gaurav -
How to config new plant in SAP MM. Steps required
how to config new plant in SAP MM. Steps required pls help
Hi,
1S pro---enterprise structure-definition -logistic general-define,check ,delete plant
here click on copy object icon
then copy your plant from stander plant or existing one
2and then define storage location if required
3then assign plant to company code
4if purchasing organization is there for your plant then assign plant to purchasing organization
Regards
kailas -
Hello Gurus,
Can anybody please provide the LSMW step by step procedures for
1. Business Partners
2. Material Master
3. Vendor Master
4. Inventory Balances
5. Purchasing Info Records
Thank you very muchHi
http://www.sapgenie.com/saptech/lsmw.htm
http://service.sap.com/lsmw
http://www.sapbrain.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
http://www.esnips.com/web/LSMW
blog
/people/hema.rao/blog/2006/09/14/lsmw--step-by-step -
Configuration steps required in ID
Hello Experts,
I am new in XI/PI. Can anyone explain me the configuration steps required when we have one sender and multiple receiver.
I have a scenario having file as a sender and JDBC,File and JMS on receiver side.
If anyone have the screenshot for similer scenario will be more helpful.
Regards,
Jay.Hi,
in ID, you will need...
1) 1 receiver determiantion
2) 3 interface determination
3) 3 receiver agreement
4) 1 sender agreement
5) 1 sender and 3 receiver channel
Regds,
Pinangshuk. -
Want to know lsmw step by step
dear sap gurus
i want to know the lsmw steps, step by steps thanks in advance. rewards the approcaite answer with the full points, thanks in advanceHi Gopi,
Check thess links which have step by step process for LSMW
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://learningabap.wordpress.com/2007/03/28/step-by-step-guide-for-using-lsmw-to-update-customer-master-records/
Check these links too which are very helpful.
/people/hema.rao/blog/2006/09/14/lsmw--step-by-step
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
Thanks,
Vinay -
Steps required to create apps to implement various web parts functionality
I have office 365 E3 a/c.
For a site we have to create few apps whoose required functionality is like
1. Newsfeed Webpart
2. Blog webpart (source is library)
3. CQWP
4. Carousel web part
5. Calendar control
Please tell all steps required to create apps for above mentioned functionality.
What will be steps and plan for this?Hi,
According to your post, my understanding is that you want to create apps to implement various web parts functionality.
You can use CQWP in the SharePoint Online. You can refer to:
When to use the Content Query Web Part or the Content Search Web Part in SharePoint - SharePoint Online for enterprises
In addition, there are some great articles about other web part for your reference:
Data Viewer App for SharePoint Online
Corporate News App
Creating a SharePoint Cloud Business App Step by Step!
Blog - Deploy A LightSwitch Application To Office 365 / SharePoint Online (Provider Hosted)
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Steps required to upgrade to java 1.6.0_27.
Can anyone please tell me or help me to as what are the steps required to upgrade to java 1.6.0_27 ??
EBS R12.0.3Hi
Helios
You need windows one, please see upper metalink note which is mention by Hussein Sawwan already
Step 1.2. Download the JRE Plug-in
Step 2. Rename the JRE Plug-in and Place it on Web Application Tier So the files mentioned in the link [http://www.oracle.com/technetwork/java/javase/downloads/jre-6u27-download-440425.html]
Linux x86 - RPM Installer 20.10 MB jre-6u27-linux-i586-rpm.bin
Linux x86 - Self Extracting Installer 20.63 MB jre-6u27-linux-i586.bin
Linux x64 - RPM Installer 19.67 MB jre-6u27-linux-x64-rpm.bin
Linux x64 - Self Extracting Installer 20.25 MB jre-6u27-linux-x64.bin
Solaris x86 - Self Extracting Binary 20.27 MB jre-6u27-solaris-i586.sh
Solaris SPARC - Self Extracting Binary 25.10 MB jre-6u27-solaris-sparc.sh
Solaris SPARC 64-bit - Self Extracting Binary 11.19 MB jre-6u27-solaris-sparcv9.sh
Solaris x64 - Self Extracting Binary 7.48 MB jre-6u27-solaris-x64.sh
These are used when I am accessing R12 application from linux/solaris platform... for accessing R12 with new JRE plugin on windows platform i need Windows x86 Offlin -> jre-6u27-windows-i586.exe
Please correct me...all these are new to me, so silly questions pop up -
Steps required while moving employees from one organisational
Can any one explain and write down steps required while moving employees from one organisational unit to other organisational unit.
regardsHi ganesh,
Firstly create the new position for the employee if it is not already existing.
Then goto SPRO : Personnel Man. -> Pers. Adm-> Customizing procedures -> Actions -> Define infogroups -> infogroup.
Only Copy 0001 is enough.
Then Setup personnel actions with this infogroup.
Then go to PA40 and execute this action for that specific employee.
You will only need to change the position assignment, org unit, job, vs all come from position info.
Regards,
Dilek
Edited by: Dilek Ersoz on Oct 14, 2008 9:41 AM
Maybe you are looking for
-
Configure a monitored target from one agent to another
Hi, I am using OEMGC 10.2.0.5 and agent 10.2.0.5/4 My question is . On a particular server I have 3 agents A1,A2,A3 And each agent is monitoring 1 Target(DB and listener) T1,T2,T3. Now I want to configure agent A1 to monitor all targets,so that I can
-
Cfform using cfif in action= causes error
Hi, Just ran into a code problem I haven't seen before. To use the CF validation for some text input, I've changed some of our <form's to <cfforms> However, If I want to check for the existence of a URL param before trying to send it in the action= o
-
All my applications keep quitting unexpectedly.
It started with firefox and safari. now it's almost anything i'm using. i know my computer is sort of old but is there anything i can do to keep this from happening all the time?
-
Recovery of queue when 1 hub is having problem
Hi, I need to recover all queue in HUB B and import to HUB A to resume the email delviery. I have tried the following but not working 1. Stop "MS Exchange Transport" service on HUB B 2. Create QueueRecovery folder in HUB A eg. C:\QueueRecovery 3.. Co
-
Hi when i am zooming in with the scale tool , the movement is not linear , at th start it is fast and to the end it shows down . the scale tool parameters are linear please help me Thanks