CS01 User Exit

I need to calculate the total weight of the BOM Components and show it in the customer fields tab of the BOM Header in Transaction code CS01, CS02 and CS03. Whenever the user enters the quantity of the BOM components in CS01 and clicks the BOM header button (CAP button in CS01) he should be able to see the total weight of all the components under the customer fieldu2019s tab. For this I have used the screen exit PCSD0003 and added a new field. But the issue I am facing is during the creation of the BOM I am not able to get the quantity of the BOM Components as the function module exits of the enhancement PCSD0003 does not have STPO table reference as a parameters. Please let me know how to get these item values during run time into my exit so that I can calculate the total weight and show it in the custom field.

PCSD0001     Applications development R/3 BOMS
PCSD0002     BOMs: Customer fields in item
PCSD0003     BOMs: Customer fields in header
PCSD0004     BOM comparison
PCSD0005     BOMs: component check for material items
PCSD0006     Mass changes user exit
PCSD0007     Check changes in STKO
PCSD0008     WBS BOM: Customer-specific explosion for
PCSD0009     Order/WBS BOM, determine URL page
PCSD0010     Order/WBS BOM, determine explosion date
PCSD0011     Knowledge-based order BOM, parallel upda
PCSD0012     Customer - Mat. number/mat. number durin
PCSD0013     Customer-specific processing of an explo
PCSD0014     Knowledge-Based Order BOM: Status

Similar Messages

User exit on SAVE event in tranasaction CS01

Hi all,
Please tell me user exit on save event in transaction cs01.
Thank you.

Hi,
Check the following user exits.
PCSD0001            Applications development R/3 BOMS
PCSD0002            BOMs: Customer fields in item
PCSD0003            BOMs: Customer fields in header
PCSD0004            BOM comparison
PCSD0005            BOMs: component check for material items
PCSD0006            Mass changes user exit
PCSD0007            Check changes in STKO
PCSD0008            WBS BOM: Customer-specific explosion for creating
PCSD0009            Order/WBS BOM, determine URL page
PCSD0010            Order/WBS BOM, determine explosion date
PCSD0011            Knowledge-based order BOM, parallel update
PCSD0012            Customer - Mat. number/mat. number during material exchange
PCSD0013            Customer-specific processing of an explosion for BOM browser
hope it helps
Regards
Rajesh Kumar

User exit name which triggers when a save button is pressed in cs01

Hi Gurus,
Can anybody tell me what is user exit which will trigger for a save button in tcode
CS02
Regards
Yathish

hi,
Below are the list of user exits available
for cs02.
PCSD0001            Applications development R/3 BOMS
<b>PCSD0002</b>            BOMs: Customer fields in item
<b>PCSD0003 </b>          BOMs: Customer fields in header
PCSD0004            BOM comparison
PCSD0005            BOMs: component check for material items
PCSD0006            Mass changes user exit
PCSD0007            Check changes in STKO
PCSD0008            WBS BOM: Customer-specific explosion for creating
PCSD0009            Order/WBS BOM, determine URL page
PCSD0010            Order/WBS BOM, determine explosion date
PCSD0011            Knowledge-based order BOM, parallel update
PCSD0012            Customer - Mat. number/mat. number during material change
PCSD0013            Customer-specific processing of an explosion for BOM rowser
Hope this helps !!
Cheers
Alfred

CS01 / CS02/ CS03 User exit

Hellou,
I must to find an user exit which restrict the access on checkbox Assembly, to see the material bom.
can you tell me which user exit i must to use ?
Your help will be appreciated.
Regards
Moderator Message: There are some standard procedures to find relevant EXITs and BADIs. Employ them.
Edited by: kishan P on Nov 25, 2010 5:29 PM

Hi Javier,
Can you confirm whether the button added has the GROUP fields populated (i.e. MODIF ID) from checking the button in screen painter SE51.
If EXIT_SAPLCSDI_001 is triggered in PBO of CS** transaction, then using CTRLDATA-STLAN, we can LOOP AT SCREEN and Modífy the screen to hide or show the button.
Do let me know.
Regards,
Aditya

Sales BOMs - User Exits

Are there any user-exits available for Sales BOMs to control the explosion of the BOM in certain Document Types?
I only want the BOM to explode for a specific order type.
Is this possible?

Dear Tom,
When we create any material for BOM-usage, we maintain "Item cat. Grp" as LUMF (T. Code: MM01/02 --> Tab: Sales: Sales Org.2)
Then, we create Material BOM in T. Code: CS01.
Now, when you use the Material-Code, created in MM01 as BOM-Material (i.e. Item cat. grp is LUMF), in sales order system throws error:
No item category available (Table T184 OR LUMF )
    Message no. V1320
Diagnosis
    No item category could be determined for the combination OR LUMF .
System Response
    The system does not allow further processing of this item.
Procedure
    Check the entries in table T184 by means of which item category
    determination is controlled.
    If you do not have the authorization to do this yourself, contact your
    system administrator.ZQT LUMF )
That means:
Maintain an entry in T. Code: VOV4
for the combination:
Sales Doc. Type + Item Cat. Grp + Item Usage + ItemCat-HgLvItm
I.e. Sales Document Types, maintained for Item Cat. Grp - LUMF, are allowed for BOM-explosion.
Best Regards,
Amit

Problem user exit PCSD0001

I'm creating a Bom Material (tr. CS01). I need to recover the list material in the user exit PCSD0001. I try with the table (SAPLCSDI)STPOB but it's empty. Any suggestion ? Thanks.

Hi,
Check the exit SAPMF02D.
Regards,
Surinder

User exit ZXPADU02 - evaluating SY-UCOMM

Hello everyone,
I am trying to display an error message whenever someone tries to create a new work schedule rule (P0007-SCHKZ) in infotype 7. However, the error message should just come up when the user is trying to save his data.
I am using user exit ZXPADU02 for this purpose. My problem is that SY-UCOMM does not seem to hold reliable data in this user exit, and SSCRFIELDS does not seem to be supported at all.
My code looks like this (only the relevant code snippet in ZXPADU02):
CASE INNNN-INFTY.
        WHEN '0007'.
      CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
        EXPORTING PRELP = INNNN
        IMPORTING PNNNN = P0007.
      CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
        EXPORTING PRELP = PSAVE
        IMPORTING PNNNN = P0007_ALT.
      IF P0007_ALT-SCHKZ <> P0007-SCHKZ
      AND IPSYST-MASSN IS INITIAL " do not warn within an info group of a personnel action
      AND SY-UCOMM = 'UPD'. " only warn when saving the data -> problem here <-
        MESSAGE 'Do not change IT7 directly or else.' TYPE 'I' DISPLAY LIKE 'E'.
        SHOW_DATA_AGAIN = 'X'.
      ENDIF.
At first glance, the above works nicely. But this is what happens when I test more thoroughly:
I create a new period in IT 7, enter a P0007-SCHKZ other than the one that was previously valid, press F11. Some warnings appear (for different reasons), which I dismiss using the Enter key. Afterwards, the above code fires, the error message is being displayed, and I am thrown back into the data screen. So far, so good.
Now I simply alter the value in the field "Weekly hours" (P0007-WOSTD) and press Enter (!). Again a series of warnings appear, including one that a dataset is going to be deleted (seeing that an IT 7-period with just the same date range already exists). I confirm that with Enter, and the data is being saved. The above code does not fire because I have only pressed Enter - but the data is being saved anyway!
Looks like a pretty erroneous behavior on the side of the SAP system. The question is whether I have a chance to do something about it in the code.

Mihir Nagar wrote:
Dear Petersen,
Your IF condition seems ok. I doubt on the message statement. Can you replace your message statement with type E.
MESSAGE 'Do not change IT7 directly or else.' TYPE 'E'.
      ENDIF.
Hope this works.
Regards,
Mihir.
I did not expect this to work, because normally you use type 'E'-messages only in certain PAI-environments, but it does the job, thank you!
make use of field IOPER of the structure PSYST to check on the infotype actions INS, MOD, COP, DEL...
In this particular case I did not care, so I did not check that. IT 7 should only be maintained through personnel actions in our case.
Next you can check with sy-ucomm field the different between "enter" and "save". With "save" sy-ucomm will be 'UPD'.
That is what I did, but as I described, there was a situation when SY-UCOMM is SPACE, but the system saved anyway due to a prior save attempt.

Using a variable not in the Export,Import, table Parameters in USER EXIT

Hi all,
During the Invoice Creation, I need to add an entry in the VBFS table, so that it will be displayed in the system log. In the FM 'RV_INVOICE_CREATE', the structure corresponding to it is XVBFS. There is a user-exit CALL CUSTOMER-FUNCTION '002', in this FM 'RV_INVOICE_CREATE'. But the import, export or Table Parameters does not have XVBFS.
How can I use XVBFS inside the User exit?..
Please help.
Regards,
Asha

Hi,
I dont know whether this will help u...
write this in user exit...to access variables/tables of main program..
FIELD-SYMBOLS: <komv>.
ASSIGN ('(SAPLMEPO)TKOMV[]') TO <komv>.
where.. SAPLMEPO is the main program...and TKOMV[] is a internal table in SAPLMEPO.
regards
Sukriti....

How to find out the user exit is implemented

Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,

Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance.

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out appropriate user exit

Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
Basu

Look for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM

How to find out FICO user exits that are used by User

How to find out the FICO user exits that are used by user.

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

Free Goods Problem and User Exit if needed in Sales Order

Hello All,
The problem is related to Free Goods in Sales Order which is given with an example -
We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
For 210 PAC (Pack) of Material A 18 PAC Free.
Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
The conversion factors maintained for Material A are as follows -
1 BT = 1BT
1 PAC = 20 BT
1 CV = 20 PAC
Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
Please suggest what need to be done in this case in respect of User Exit or Source Code in ABAP if needed.
Thanks & Regards
Priyanka Mitra

Hello Priyanka Mitra,
We are facing a problem same as you.
How did you solve this problem?
We are very glad if you teach it concretely.
Please advise your solution to us.
Thanks.

User Exit/ Badi for Changing Quant parameters during TO Creation

Hi Gurus,
Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
I will highly appreciate reply from Gurus.
Regards,
Gupta M

Hi manish,
Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
Thanks,
Shibashis

BADI/user exit for transcation code "BP" in CRM

Hi Experts,
Is there a BADI / user exit that is triggered after successful saving/updating of Business Partner using transaction code "BP"?
We want to send general infos such as partner number, Name, Birth date, etc. about the business partner being created/updated using IDoc.
We are using CRM WinClient 4.0.
If you know the steps on how this requirement will be done, kindly post them.
Thank you very much.

I don't have any CRM system at hand, but I'm sure there are some BAdI's for this. Look in SE18 for BP or BUS, and i'm sure you will find something.
One suggestion though: Before going for the BadI, try and see if CRM also uses change pointers for sending Idoc's . This case you wont need any user exits / badis, an probably no programming at all.
Transaction
BD50: Activate Change Ptrs for Mess. Type
BD61: Activate Change Pointers - Generally
and use report RBDMIDOC for triggering IDoc.

CS01 User Exit

Similar Messages

Maybe you are looking for