Cs11 not Display Alternate Material Qty

Dear Experts
Whenever we r Putting Alternate Material in BOM and Set it Prioty And define the Qty as similar with other one and after that
whenever we r checking Display in Cs11 Then System will Not Show Us the Alternate Material Qty And Also The Qty of Number 1 Material whose alternate is Define. both material R Blank Qty .
What would be there.
Rgds
Pankaj Agarwal

Dear Pankaj,
Whenever you are checking the BOM display using T code CS11for a product which has alternative item group,then after
executing the report,click on the change layout(control+F8) and select the fields like component quantity and not
comp.Qty,and also usage probability and alternative item group,because if you have only the field comp.Qty,then in case if you
have given the usage prob as zero means then it wont get displayed in the report.
So select the change layout and select for the field Component quantity and check the same.
Regards
Mangalraj.S

Similar Messages

  • Long term planning material not displayed in MS04

    Hi,
    May I request your assistance on my issue? When I run the MS04
    one of the component material is not displaying. I have change the planning
    period and run again the MS03 for a specific material which is the finished material.
    My component is now displaying, however the other material now has a negative
    value on available qty.
    Can you help me understand why the component material is not
    displayed in my first run? How it is included on the next run and why the other
    material had a negative value on available qty when I run the MS04 after I change
    the planning period?
    Hope to receive your help.
    Thanks,
    Aisha

    In the MRP Parameters at the time of MRP Run
    Planning Mode=Delete and Recreate Planning Data
    (Do it in dev server/sandbox/ides )then do it in production server
    will bring the Requirements column with Pegged Requirements in Capacity Planning
    Pl try
    K.Prabakaran

  • VC - Item not displayed in CS11

    There is a Material Variant which is an assembly.
    When I see this Variant through the transaction CU50, I see a component A in the assembly. But when I explode the BOM of the variant material through CS11 i do not see this component A . What can be the reason for this difference ?
    There is no sales order.
    A material variant is created as it is a frequently used variant of a configurable material.

    Hi Krishna,
    I see all the components maintained in the BOM for this variant , except that component A.I am not able to figure out as to why is not displayed in the list.
    amit

  • STO - Excise tab not getting displayed in material document after posting.

    Dear all,
    We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
    It is plant to plant stock transfer with excise, the process that we are following as given below:
    1) STO PO - ME21N
    2) Outbound delivery - VL10B - Post PGI in VL02N
    3) Outgoing excise invoice - J1IIN  - With the key DLFC.
    4) GR - MIGO with excise invoice capture.
    During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
    But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
    Request to please do let us know if we have missed out on any configuration or master data.
    Regards,
    mahesh.

    Hi,
    Do the all customization setting for CIN for reference check the following link for India. and Material management
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    You have to maintain Excise master data for material,vendor and PLant in J1ID .
    reward if helpful,

  • He material is not displayed as valuated Sale Order Stock

    Sale Order has been created and MRP execution is done at MD04.
    The Sale Order is released as Production Order.
    But when I am executing T Code  MBBS I am getting error message syaing
    The material is not displayed as valuated Sale Order Stock.
    Diagnosis
    The system has not found any stock that satisfies the selection criteria entered.
    Possible reasons for this are:
    The material does not exist. Have you entered the right material number?
    Your selection is too restrictive. The system was not able to find any stock that satisfies all selection criteria.
    The stock balance is zero.
    Procedure
    Check all the selection criteria you entered.
    Stock overview has displayed enough stock for material.
    Please adivse me how Material  can be displayed as valuated Sale Order Stock at MBBS.
    Regards

    Hi,
    Check whether the Production order execution is done and any GR has been done against the Order.
    Once the above is done, check in MBBS, the stock will sit in the Valuated SO stock.
    Even wait for any other replies.
    Thanks & Regards,
    Ravi Kumar

  • Material Description is not displaying for few records in Report

    Dear Experts,
    Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
    Cud u plz suggest a good solution for it.
    Regards,
    Sai Phani.

    Hi Phani,
    For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
    regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
    regards,
    Rk.

  • PO Material text not displayed in PO

    Hi All,
    Please help me in finding a solution for my issue,
    We use SAP ERP 6.0, and recently upgraded from SRM 4.0 to SRM 7.0. whenever a PO is processed in SRM and replicated to SAP, "Item text" inputs entered in SRM is replicated to "Material PO Text" in SAP and when the PO is printed, those inputs are not displayed in the PO..
    However if I amend the same PO again in SRM (by just modifying the inputs in "Item text") and re-replicate to SAP and reprint the PO, the inputs are displayed in PO this time. becoz of this, we had to amend every PO again to have the Item text displayed in PO.
    Why the inputs are not displayed in PO at the first time and what made the system to display it after i amend the PO the second time???
    Any help is much appreciated.
    Thanks
    Vinoth

    Nabheet, Thanks for your response.
    I have already raised this with the tech team and they said they antcipate this to be fixed by this March. I have no idea if this takes so long to fix it. Since we had to process 100s of POs every day, it is affecting our SLA badly
    Vinoth

  • Multi level BOM explosion in CS11/12/13 Cost of items are not displayed

    Hi,
      I want to display cost of the components in CS11 / CS12 / CS13 T.codes Std SAP will not display the cost of components. for this they have given note 177006 and asked to change some manual correction. In the post processing of the note they have asked put "your_display_profl" This is making me confusing I wanted know whether I want to create a new display pofile using CLVL t.code or can I make the correction as said by SAP "your_display_profl". Could some body guide me in this regard.
    Regards
    Ramana

    >
    Venkata Ramana wrote:
    > Hi,
    >
    >   I want to display cost of the components in CS11 / CS12 / CS13 T.codes Std SAP will not display the cost of components. for this they have given note 177006 and asked to change some manual correction. In the post processing of the note they have asked put "your_display_profl" This is making me confusing I wanted know whether I want to create a new display pofile using CLVL t.code or can I make the correction as said by SAP "your_display_profl". Could some body guide me in this regard.
    >
    > Regards
    >
    > Ramana
    Ramana,
    Which version of SAP you are using, if its below 4.6c, then
    You need to have custom Display and Print Profile defined through CLVL transaction and used in the modification proposed.
    If your version is 4.6c onwards then,
    If you want to use the variable list then you need to have the You need to have custom Display and Print Profile defined through CLVL transaction and used in the modification proposed with IF.
    If you want to use the ABAP ALV based output, then you should not implement the IF... ENDIF query of the suggested modification concerning the user-defined list profile; instead you should set the local L_MBWLS parameter to 'X'
    I hope you need to work with your ABAP person to clearly understand this correction Instruction and Implement as required.
    Regards,
    Prasobh

  • Info Record Text and Material Text not displayed in Subcon. PO printout

    Hi,
    I have this scenario, where the Info record text from Info Record PO text does not appear in Print out but appears in Print preview.
    Also the Info record text for  standard Purchase order is displayed in Print preview and Print output.
    The config settings for texts for Purchase order is the same for Purchase order with no Item Category (Standard) and Subcontracting (item category L).
    Also the texts in Purchase order automatically copies in Standard purchase order (adopt button not present) but not in Subcontract purchase order (Adopt text is present).
    I have checked the config for copying rule, for Info record text is automatically adopt.
    I am unable to identify the missing config for this.
    Also the same problem exists for Material text from Material Master PO text is not displayed in Fax output but appears in Print output.
    Please let me have your inptus,
    Regards, Muthuvel

    The solution to this is SPRO->SAP Reference IMG->Materials Management->Purchasing->Messages
    ->Text for Messages->Define Text for Purchase Order.
    Select Texts for Document Item folder - There will be a list by Document Type and Item Category. Make sure there are entries for your combination, otherwise they will not be part of the output message.

  • RE: Pr release , it should not be editalble like qty, material.

    Dear  Sap experts,
    In Pr , After the release Pr  , it should not be editable like material & Qty.
    Thanks
    Mohit

    Hi Mohit,
                  as you have Written
    please advise me that where is the option of R in release indicators... there is only 1,2,3,4,b & X
    Do following settings during designing of release procedure and then your design release strategies,which result once PR released,it can not be changed.
    ReleaseIndicator ....Released....Changeability ....Value change % ....Description
    B .........................................................................................................PR Blocked
    R.................................X.....................1..................................................PR Release
    in front of B (Blocked) you have not given Changeability option......................PLease please give in that also.
    Rgeards,
    yawar Khan

  • Actual cost not correctly displayed for material consumed in an order

    Hi All,
    I have an issue which is as follows:
    In a service order, I have consumed 13 materials for which I am able to view the list of goods movement with its amount and plant and storage location.
    For each goods movement system has generated material document, accounting document, controlling document, etc.
    However system is not displaying the actual costs of all the 13 materials consumed within the order. Only one material cost is dispalyed in actual cost of overview tab of COSTS tab.
    Incidentally, when I clicked the "Rep. Plan/Act." button, system is displaying the actual costs of line item wise material consumption.
    Kindly let me know what could be the reason for this error.
    Many thanks in advance............ JK.

    Kannan,
    If the "Rep. Plan/Act." costs are correct, then you have problems with your value categories
    Have a look at the following correction programs:
    Run TCode OLI5 to correct value category errors (program RIPMCO00)
    Run TCode OLPM to re-build structures (program RIPMS001)
    PeteA

  • Materialized Views/Snapshots not displayed

    SQL Devloper: 1.0.0.15.57 on Windows XP
    Remote Oracle version: Oracle9i Enterprise Edition Release 9.2.0.5.0 on Solaris 2.6
    Another department created a combined Snapshot of two tables for another department. Under previous software (TOAD), Snapshot was displayed in the Tables and Snapshots tabs. However, under SQL Developer, the Snapshot is not displayed under the Tables tree, nor is it displayed under the Materialized Views tree. A Public Synonym is found in SQL Developer for this object.
    Message was edited by:
    Michael Geier

    It is my understanding that this is a bug. (See the discussion at Bug in "Other Users" and Materialized Views We have the same problems with materialized views. I am not aware of a workaround at this time. It is a major problem for us. It prevents our developers from even using this product.
    Message was edited by:
    Clharr

  • Material num and Plant is not displaying in Output

    hi
    i have written this code to get all inspection types...
    while compiling im getting the correct output...
    it is displaying only inspection types ....
    Material num and Plants are not displaying..
    form PROCESS_DATA .
    CLEAR: WA_FINAL,
           WA_QMAT.
    MOVE IT_FINAL TO I_FINAL.
    REFRESH IT_FINAL.
    LOOP AT I_FINAL assigning <fs_fin>.
    LOOP AT IT_QMAT INTO WA_QMAT where MATNR = <fs_fin>-MATNR.
                                       P_werks = <fs_fin>-werks.
    IF SY-SUBRC EQ 0.
    <fs_fin>-ART = WA_QMAT-ART.
    APPEND <fs_fin>-ART TO it_final.
      CLEAR WA_QMAT.
    CLEAR wa_final.
    ENDIF.
      ENDLOOP.
    ENDLOOP.

    Hi
    ya im getting correct values to <fs_fin>
    now its displaying correct values bt in improper format
    Mat num                  Plant                       insp type
      100001                   1210                         05
      100002                    1320                         01
                                                                     02
                                                                     03
                                                                     05
    bt i want the output as below
    Mat num                  Plant                       insp type
      100001                   1210                         05
                                                                    02
                                                                    03
      100002                    1320                         01

  • Reports MB5W / MB5L are not displaying the individual material lines

    Hi All,
    We are encountering a problem in MB5W/MB5L reports. When we are executing these report with the option checked "Display Indiv. Material Lines", system is not displaying the details material wise.
    It is just showing the GL wise value of Material ccy and Stock account ccy. It was running fine when we ran the same reports in Feb for Jan 2014.
    Do you have any idea why system is behaving like this please?
    Thanks,

    Hi Narasimhulu,
           In report MB5W/MB5L, click the "Current display variant icon" in the next pop-up screen click the position tab and check whether all the material related fields are added or not. If not, move the fields into display list and then check.
    Thanks

  • Material field not getting displayed on Material Data tab in ME51n or ME21N

    Material Field was missing in ME51n/ME21n.
    I went into SPRO ->PReq-> Define Screen Layout at Document Level and checked Optional for Material field. Now it's showing up on the ITEM overview section of the Preq.
    But its still missing on Material Data tab in ME51n or ME21N but I can see the Material field on the Item Overiew section of the Req/PO Screen.
    Where exactly do I make the settings for the item level in SPRO?

    We use the Enjoy screens and document types for ME51N/ME21N pretty much out of the box.  We do not have the material master number on any of the detailed item tabs either.  I do not think you can show it in the details unless you activate the customer specific fields tab.
    Regards

Maybe you are looking for