CS11 '该 BOM 是无效的 2009/06/15'

各位XDJM,
今天,遇到一个问题(USER提出的):
用CS03可以展开展开一个物料TIRGABNTXNE1ANJ,但是用CS11就出现了'该 BOM 是无效的 2009/06/15';
这个是什么问题?
我在一个程序里CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'一样无法展出该BOM,是否要设置哪些参数才可以?
请指教,TKS!

Hi,
用CS02检查该物料的BOM主数据，在Header Overview里有一个字段BoM Status，看看该BoM的主数据是否为Active状态，如果不是把它激活，然后再用CS11试试！
Good luck
Tao

Similar Messages

  • CS11- BOM explosion with status inactive

    When a BOM is marked as inactive( at the header level), the BOM explosion using CS11 is not possible.  The systems says there is no effective BOM. However I can pull up the same using CS03 and drill down level by level.
    Is this standard SAP behaviour? Are there any settings in Customizing that will make the explosion for inactive BOM's  using CS11 possible?

    Alternative to select inactive BOM
    BOM status = inactive in BOM header
    In OS31
    Create a selection ID = 09, selection priority = 1, BOM usage = 1
    OS 30
    Create a BOm application copy from PP01 let us say ZP01
    In which enter the selection ID = 09, what you created before
    Remove all the ticks of check BOM
    Save
    That is all.
    In cs11, select the application as ZP01 and you will get the BOM explosion.

  • CS11 'u8BE5 BOM u662Fu65E0u6548u7684 2009/06/15'

    各位XDJM,
    今天,遇到一个问题(USER提出的):
    用CS03可以展开展开一个物料TIRGABNTXNE1ANJ,但是用CS11就出现了'该 BOM 是无效的 2009/06/15';
    这个是什么问题?
    我在一个程序里CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'一样无法展出该BOM,是否要设置哪些参数才可以?
    请指教,TKS!

    My 'chinese' (is it chinees by the way), is a bit rusty these days, so you might want to consider posting your request in English please. Otherwise, the number of replies will be limited I'm afraid.

  • How to get inactive BOM by using FM?

    dear all,
    we are used to get BOM list by using FM 'CS_BOM_EXPL_MAT_V2 ';
    but when there is a inactive BOM,FM 'CS_BOM_EXPL_MAT_V2 '  can only be used to get the first level materials,
    pls tell me how can i resolve this problem,or there may be an another FM for this situation?
    tks!
    Edited by: snow zeng on Dec 22, 2009 10:29 AM

    haha,that's a solution:
    CS11- BOM explosion with status inactive

  • I want to show Vendor Number in CS11 report

    Dear Guru,
    Please help me to display vendor details in report CS11- BOM EXPLOSION LEVEL BY LEVEL.
    INPUT: 1) HEADER:2) PLANT:3) ALTERNATIVE:4) BOM APPLICATIN : BEST
    OUTPUT: VENDOR IS NOT DISPLAY THERE
    where is customization, settings for display vendor.
    MANOJ

    Dear Monoj
    Please enter the following details
    In CS11- BOM EXPLOSION LEVEL BY LEVEL.
    INPUT: 1) HEADER:2) PLANT:3) ALTERNATIVE:4) BOM APPLICATIN : PP01 or as applicable
    Now once you have excuted , system will display a result with qty , BUM, Item detauils etc  .After that you goto Change Layout Option (coulr ful checker box -just beside the Envelope symbol ) -Here you will find list of Filed in hidden column -Select Vendor Filed in the down list  and drag it to Dsiplay colu,mn and SAVE.
    Try and come back
    Regards
    JH

  • BOM delete entries

    Hi,
    I am working on cs02. my requirement is to get the details of deleted entries in BOM. i have now got the details of changed values.  only the deleted values are left.
    i have seen :
    CS01 CREATE
    CS02 CHANGE
    CS03 DISPLAY
    EXTRAS CS28 ARCHIVING
    CS20 MASS CHANGES
    EVALUATION/BOM CS11 BOM MULTILEVEL
    EXPLOSION/MATERIAL CS12 STRUCTURE MULTILEVEL
    BOM CS13 SUMMURISED BOM
    How to get the details of history of deleted BOM componentes. even a tcode will help
    thanks in advance guys

    Hi Devrath....
    when you used CS02 for BOM and delete any component from there and save it...
    then this delete entry's record will be inserted in table CDPOS....
    you can see the value as D - deleted, U - updated, I - inserted in the CHNGIND field of table CDPOS...
    so when you see the value of CHNGIND as D then that component is deleted from your BOM and can get the value of
    deleted components....
    hope this will help you...
    Nipul shah...
    Edited by: Nipul.Shah on Mar 1, 2012 4:57 PM

  • Difference between cs11 and cs12

    Hi all,
    What is the difference between the t codes cs11 and cs12.. can any one give the exact description for these t codes
    Regards,
    Joseph.

    Joseph:
    CS12 : Mulitlevel BOm View:
    Example: it  explaodes and displayes all subassembly BOM directly as shown below: Level2 appers below Level1 immeidately and so on..
    .1     0010           100-100     Casings          1     PC     L     
    ..2     0010                          100-110     Slug for spiral casing          1     PC     L     
    ..2     0020          100-120     Flat gasket          1     PC     L     
    ..2     0030          100-130     Hexagon head screw M10          8     PC     L     
    .1     0020                          100-200     Actuation          1     PC     L     
    ..2     0010          100-210     Slug for fly wheel          1     PC     L     
    CS11: BOM are displayed level by level. First all single levels are displayed and then each level is explaoded  further as shown below.
    1     0010     100-100     Casings          1
    1     0020     100-200     Actuation          1
    1     0030     100-300     Hollow shaft          1
    1     0040     100-400     Electronic          1
    1     0050     100-500     Bearing case          4
    1     0060     100-600     Support base          2
    1     0070     100-700     Sheet metal ST37          6.40
    1     0080     100-130     Hexagon head screw M10          8
    1     0090     P-100 DRW 000 00     Assembly drawing for pump          1
    1          100-100     Casings          
    2     0010     100-110     Slug for spiral casing          1
    2     0020     100-120     Flat gasket          1
    2     0030     100-130     Hexagon head screw M10          8
    1          100-200     Actuation          
    2     0010     100-210     Slug for fly wheel          1
    1          100-300     Hollow shaft          
    2     0010     100-310     Slug for Shaft          1
    1          100-400     Electronic     
    The o/p shown is same in both the case only formatting change is there.
    Regards,
    Santosh Sarda

  • BOM Releated Problem

    Dear Sir,
    We are providing material to manufactured optical cble to vander
    In this material we required lentgh of optical cble is 500mm so we can feed 500mm qty. in bom of optical cable assy
    But vander required 510 mm length of wire because 10mm is used in crimping & soldering. if we put length of wire as 510mm in bom then IQC person verify with bom then at this IQC reject the material .
    So pls advice me that where i can put this 10 mm length in BOM so that vander can received 510 mm from us & in CS11 bom display only 500 mm length of wire.
    Thanks & Regards
    Ajay Pareek

    Go to change BOM CS02 and Change length from 500mm to 510mm

  • What are the standard SAP reports in PP ?

    Hi PP Guru's,
    Please explain me the standard Reports available in PP with Tcode and  give me
    how to configure for the customer requirements incase if demanded by them a
    change is reqd? pl give few of them
    Thanx & regards,
    Vimalbalaji

    MATERIAL
    CREATE-GENERAL       MM01       IMMEDIETELY
                         MM11       SCHEDULE
    CHANGE               MM02       IMMEDIETELY
                         MM12       SCHEDULE
                         MM13       ACTIVATE
    FLAG FOR DELETION    MM06       IMMEDIETELY
                         MM16       SCHEDULE
    DISPLAY              MM03       DISPLAY CURRENT
                         MM19       DISPLAY AT KEY DATE
    DISPLAY CHANGES      MM04       ACTIVE CHANGES
                         MM14       SCHEDULE CHANGES
                         MM17       MASS MAINTENANCE
                         MMAM       CHANGE MATERIAL TYPE
    OTHER                MMBE       STOCK OVERVIEW
                         MMPV       CLOSE PERIOD
                         MMRV       ALLOW POSTING TO
                                    PREVIOUS PERIOD
                         MM50       INSTANT MATERIAL VIEW
                         MMSC       ENTER STORAGE LOCATIONS
                         MM60       MATERIAL LIST
    ARCHIVING(MATERIAL)  MM71       ARCHIVE/DELETE
                         MM72       DISPLAY ARCHIVE
    BILL OF MATERIAL (MATERIAL BOM)
                         CS01       CREATE
                         CS02       CHANGE
                         CS03       DISPLAY
    EXTRAS               CS28       ARCHIVING
                         CS20       MASS CHANGES
    EVALUATION/BOM       CS11       BOM MULTILEVEL
    EXPLOSION/MATERIAL   CS12       STRUCTURE MULTILEVEL
    BOM                  CS13       SUMMURISED BOM
    WORK CENTRES
                         CR01       CREATE
                         CR02       CHANGE
                         CR03       DISPLAY
                         CA85       REPLACE
    CAPACITY             CR11       CREATE
                         CR12       CHANGE
                         CR13       DISPLAY
    HIERARCHY            CR21       CREATE
                         CR22       CHANGE
                         CR23       DISPLAY
    LINE HIERARCHY       LDB1       CREATE
                         LDB2       CHANGE
                         LDB3       DISPLAY
    REPORTING            CR60       W/C INFORMATION SYSTEM
                         CR05       W/C LIST
                         CR06       COST CENTRE ASSIGNMENT
                         CR07       W/C CAPACITIES
                         CR08       W/C HIERARCHY
    WHERE USED           CA80       WORK CENTRE
                         CR15       CAPACITY
                         CR10       CHANGE DOCUMENTS
    EXTRAS               CR09       STD. TEXTS TASK LIST
                         CR41       ARCHIVING
    ROUTING
    STAD. ROUTING        CA01       CREATE
                         CA02       CHANGE
                         CA03       DISPLAY
    REF. OPERATION SETS  CA11       CREATE
                         CA12       CHANGE
                         CA13       DISPLAY
    RATE ROUTING         CA21       CREATE
                         CA22       CHANGE
                         CA23       DISPLAY
    REF. RATE ROUTING    CA31       CREATE
                         CA32       CHANGE
                         CA33       DISPLAY
    EXTRAS               CA85       REPLACE W/C
    MASS CHANGES         CA95       REPLACE REF. OP. SET
                         CA75       REPLACE PRT
    DELETE TASK LIST     CA99       WITH ARCHIVING
                         CA98       W/O ARCHIVING
    REPORTING            CA80       WORK CENTRE
    WHERE USED LIST      CA90       REF. OP. SETS
                         CA70       PRODUCTION RESORCE TOOLS
    COST CENTRE
                         OKKP       MAINTAIN CONTROLLING AREA
                         KS01       CREATE COST CENTRE
                         KZS2       CREATE COSTING SHEET
                         KA01       CREATE PRI. COST ELEMENT
                         KA06       CREATE SEC. COST ELEMENT
                         KL01       CREATE ACTIVITY TYPE
                         KP26       ACTIVITY TYPE/PRICE PLANNING
    SALES AND OPERATIONS PLANNING
    PRODUCT GROUP        MC84       CREATE
                         MC86       CHANGE
                         MC85       DISPLAY
    GRAPHIC              MC91       PRODUCT GROUP
                         MC92       OVERVIEW
    PLANNING             MC81       CREATE
    FOR PRODUCT GROUP    MC82       CHANGE
                         MC83       DISPLAY
                         MC75       TRANSFER PG TO PLANNING
    FOR MATERIAL         MC87       CREATE
                         MC88       CHANGE
                         MC89       DISPLAY
                         MC74       TRANSFER MATERIALS TO DM
                         MC9K       MATERIAL AVAILABILITY
    VERSION MANAGEMENT   MC78       COPY
                         MC80       DELETE
    FLEXIBLE PLANNING    MC93       CREATE
    PLANNING             MC94       CHANGE
                         MC95       DISPLAY
                         MC9K       MATERIAL AVAILABILITY
    TOOLS/PLANNING TYPE  MC8A       CREATE
    MACRO                MC8B       CHANGE
                         MC8C       DISPLAY
    EVENT                MC64       CREATE
                         MC65       CHANGE
                         MC66       DISPLAY
    ROUGH CUT PLANNING   MC35       CREATE
    PROFILE              MC36       CHANGE
                         MC37       DISPLAY
    ENVIRONMENT          MC90       TRANSFER MATERIALS TO DM
    ACTIVITY REQT.       KSPP       TRANSFER TO COST CENTRE
                         KSBL       COST CENTRE OLANNING REPORT
                         KSOP       TRANSFER TO ACTIVITY BASED COSTING
                         CPBL       PLANNING REPORT PROCESSES
                         MC9C       REPORTING
    SETTINGS             MC96       FORECAST PROFILE
    DISSAGGRIGATION      MC76       BREAKDOWN PG PLAN
                         MC77       DISPLAY PG PLAN
                         MC75       TRANSFER PG TO PLANNING
                         MC74       TRANSFER MATERIALS TO DM
    FORECASTING
    INDIVIDUAL FORECAST  MP30       EXECUTE
                         MP31       CHANGE
                         MP32       DISPLAY
    TOTAL FORECAST       MP38       EXECUTE
                         MP33       REPROCESS
                         MP39       PRINT
                         MPBT       EXECUTE BACKGROUND
                         MPDR       PRINT BACKGROUND
    DEMAND MANAGEMENT
    PIR                  MD61       CREATE
                         MD62       CHANGE
                         MD63       DISPLAY
                         MD65       REQTS. FOR SCINARIO
                         MD66       COPY SIMULATED DEPENDENT REQT.
                         MD70       COPY TOTAL FORE CAST
    EVALUATION           MD73       DISPLAY TOTAL REQT.
                         MD79       EXCELL INTERFACE
                         MD4C       ORDER REPORT
                         MD72       CHARECTERISTICS PLANNING
    CUSTOMER REQT.       MD81       CREATE
                         MD82       CHANGE
                         MD83       DISPLAY
    REPETITIVE MANUFACTURING
    MASTER DATA          C223       PRODUCTION VERTION
    PRODUCT COST PLANNING
    COSTING RUN          CKMATSEL   CREATE
    SELECTION LIST       CKMATCON   Edit
                         CK40N      EDIT COSTING RUN
    Check with below Link :
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/process%2border%2bstatus%2bmanagement
    Thanks
    Seshu

  • Re:Bill of material

    Hi All,
    i want to take printout for the Bill of material.
    how can i take the print from the SAP.
    please give me the valid information on that.
    Thanks
    siva

    Dear Sivakumar,
    Use
    CS11 - BOM Level By Level,
    or CS12 - Multi Level BOM
    or CS13 - Summarized BOM to download the BOM report and then you can export the same to a
    spread sheet or a word processing and take the print out.
    Regards
    Mangalraj.S

  • Changing TM Drives: Restore fails

    I am trying to change my TM drive from my current 500GB to a brand new 1.5TB drive.
    I erased the new drive and named it TimeMachine, the old drive is Time Machine.
    I followed the Restore procedure using Disk Utility with Time Machine as the Source and TimeMachine as the Destination.
    At approx 10 mins into the Restore, Disk Utility quits with this error:
    "Restore Failure
    Could not restore - Operation not permitted"
    Here's the log showing that there is a problem with AdbeRdr90en_USi386.bom;
    2009-08-17 21:53:28 -0700: Disk Utility started.
    2009-08-17 21:53:50 -0700: Preparing to erase : “TimeMachine”
    2009-08-17 21:53:50 -0700: Partition Scheme: GUID Partition Table
    2009-08-17 21:53:50 -0700: 1 volume will be erased
    2009-08-17 21:53:50 -0700: Name : “TimeMachine”
    2009-08-17 21:53:50 -0700: Size : 1.4 TB
    2009-08-17 21:53:50 -0700: Filesystem : Mac OS Extended (Journaled)
    2009-08-17 21:53:52 -0700: Initialized /dev/rdisk3s2 as a 1397 GB HFS Plus volume with a 114688k journal
    2009-08-17 21:53:52 -0700: Mounting disk.
    2009-08-17 21:53:54 -0700: Erase complete.
    2009-08-17 21:53:54 -0700:
    2009-08-17 21:54:45 -0700: Restore Disk
    2009-08-17 21:54:45 -0700: Source: “Time Machine”
    2009-08-17 21:54:45 -0700: Destination: “TimeMachine”
    2009-08-17 21:54:45 -0700: Erase Destination: No
    2009-08-17 21:54:45 -0700:
    2009-08-17 21:54:45 -0700: Starting Restore…
    2009-08-17 21:54:45 -0700: Validating target...
    2009-08-17 21:54:45 -0700: done
    2009-08-17 21:54:45 -0700: Validating source...
    2009-08-17 21:54:45 -0700: done
    2009-08-17 21:54:45 -0700: Validating sizes...
    2009-08-17 21:54:45 -0700: done
    2009-08-17 21:54:45 -0700: Copying
    2009-08-17 22:03:33 -0700: could not copy /Volumes/TimeMachine/Backups.backupdb/Steven Shmerler’s Mac Pro/2009-05-21-201856/Main HD/Users/shmerls/Desktop/Storage25/AdbeRdr90en_US_i386.pkg/Contents/Resources/AdbeRdr90_en_USi386.bom; Operation not permitted
    2009-08-17 22:03:33 -0700: Bom copy exited with error 1
    2009-08-17 22:03:33 -0700:
    2009-08-17 22:03:33 -0700: Could not restore - Operation not permitted

    Steven,
    Let's just make sure that you went through the correct steps....
    1) Insure that the destination drive is using the GUID Partition Table scheme.
    2) In Disk Utility, drag the source volume from the list at the left, into the "Source" field.
    3) Next, drag the destination volume from the list at the left, into the "Destination" field.
    4) Insure that "Erase Destination" is selected.
    5) Click "Restore."
    If you are sure that you followed these steps, there may be something wrong with the old volume. Some disk error, I would guess.
    Scott

  • PP & QM config Tcodes

    hi SAP gurus.. can u send me the SAP PP and QM configuration Tcodes.
    nithya

    Dear Nithyaseelan,
    Please find list of PP & QM codes
    PP
    MATERIAL
    CREATE-GENERAL       MM01       IMMEDIETELY
                         MM11       SCHEDULE
    CHANGE               MM02       IMMEDIETELY
                         MM12       SCHEDULE
                         MM13       ACTIVATE
    FLAG FOR DELETION    MM06       IMMEDIETELY
                         MM16       SCHEDULE
    DISPLAY              MM03       DISPLAY CURRENT
                         MM19       DISPLAY AT KEY DATE
    DISPLAY CHANGES      MM04       ACTIVE CHANGES
                         MM14       SCHEDULE CHANGES
                         MM17       MASS MAINTENANCE
                         MMAM       CHANGE MATERIAL TYPE
    OTHER                MMBE       STOCK OVERVIEW
                         MMPV       CLOSE PERIOD
                         MMRV       ALLOW POSTING TO
                                    PREVIOUS PERIOD
                         MM50       INSTANT MATERIAL VIEW
                         MMSC       ENTER STORAGE LOCATIONS
                         MM60       MATERIAL LIST
    ARCHIVING(MATERIAL)  MM71       ARCHIVE/DELETE
                         MM72       DISPLAY ARCHIVE
    BILL OF MATERIAL (MATERIAL BOM)
                         CS01       CREATE
                         CS02       CHANGE
                         CS03       DISPLAY
    EXTRAS               CS28       ARCHIVING
                         CS20       MASS CHANGES
    EVALUATION/BOM       CS11       BOM MULTILEVEL
    EXPLOSION/MATERIAL   CS12       STRUCTURE MULTILEVEL
    BOM                  CS13       SUMMURISED BOM
    WORK CENTRES
                         CR01       CREATE
                         CR02       CHANGE
                         CR03       DISPLAY
                         CA85       REPLACE
    CAPACITY             CR11       CREATE
                         CR12       CHANGE
                         CR13       DISPLAY
    HIERARCHY            CR21       CREATE
                         CR22       CHANGE
                         CR23       DISPLAY
    LINE HIERARCHY       LDB1       CREATE
                         LDB2       CHANGE
                         LDB3       DISPLAY
    REPORTING            CR60       W/C INFORMATION SYSTEM
                         CR05       W/C LIST
                         CR06       COST CENTRE ASSIGNMENT
                         CR07       W/C CAPACITIES
                         CR08       W/C HIERARCHY
    WHERE USED           CA80       WORK CENTRE
                         CR15       CAPACITY
                         CR10       CHANGE DOCUMENTS
    EXTRAS               CR09       STD. TEXTS TASK LIST
                         CR41       ARCHIVING
    ROUTING
    STAD. ROUTING        CA01       CREATE
                         CA02       CHANGE
                         CA03       DISPLAY
    REF. OPERATION SETS  CA11       CREATE
                         CA12       CHANGE
                         CA13       DISPLAY
    RATE ROUTING         CA21       CREATE
                         CA22       CHANGE
                         CA23       DISPLAY
    REF. RATE ROUTING    CA31       CREATE
                         CA32       CHANGE
                         CA33       DISPLAY
    EXTRAS               CA85       REPLACE W/C
    MASS CHANGES         CA95       REPLACE REF. OP. SET
                         CA75       REPLACE PRT
    DELETE TASK LIST     CA99       WITH ARCHIVING
                         CA98       W/O ARCHIVING
    REPORTING            CA80       WORK CENTRE
    WHERE USED LIST      CA90       REF. OP. SETS
                         CA70       PRODUCTION RESORCE TOOLS
    COST CENTRE
                         OKKP       MAINTAIN CONTROLLING AREA
                         KS01       CREATE COST CENTRE
                         KZS2       CREATE COSTING SHEET
                         KA01       CREATE PRI. COST ELEMENT
                         KA06       CREATE SEC. COST ELEMENT
                         KL01       CREATE ACTIVITY TYPE
                         KP26       ACTIVITY TYPE/PRICE PLANNING
    SALES AND OPERATIONS PLANNING
    PRODUCT GROUP        MC84       CREATE
                         MC86       CHANGE
                         MC85       DISPLAY
    GRAPHIC              MC91       PRODUCT GROUP
                         MC92       OVERVIEW
    PLANNING             MC81       CREATE
    FOR PRODUCT GROUP    MC82       CHANGE
                         MC83       DISPLAY
                         MC75       TRANSFER PG TO PLANNING
    FOR MATERIAL         MC87       CREATE
                         MC88       CHANGE
                         MC89       DISPLAY
                         MC74       TRANSFER MATERIALS TO DM
                         MC9K       MATERIAL AVAILABILITY
    VERSION MANAGEMENT   MC78       COPY
                         MC80       DELETE
    FLEXIBLE PLANNING    MC93       CREATE
    PLANNING             MC94       CHANGE
                         MC95       DISPLAY
                         MC9K       MATERIAL AVAILABILITY
    TOOLS/PLANNING TYPE  MC8A       CREATE
    MACRO                MC8B       CHANGE
                         MC8C       DISPLAY
    EVENT                MC64       CREATE
                         MC65       CHANGE
                         MC66       DISPLAY
    ROUGH CUT PLANNING   MC35       CREATE
    PROFILE              MC36       CHANGE
                         MC37       DISPLAY
    ENVIRONMENT          MC90       TRANSFER MATERIALS TO DM
    ACTIVITY REQT.       KSPP       TRANSFER TO COST CENTRE
                         KSBL       COST CENTRE OLANNING REPORT
                         KSOP       TRANSFER TO ACTIVITY BASED COSTING
                         CPBL       PLANNING REPORT PROCESSES
                         MC9C       REPORTING
    SETTINGS             MC96       FORECAST PROFILE
    DISSAGGRIGATION      MC76       BREAKDOWN PG PLAN
                         MC77       DISPLAY PG PLAN
                         MC75       TRANSFER PG TO PLANNING
                         MC74       TRANSFER MATERIALS TO DM
    FORECASTING
    INDIVIDUAL FORECAST  MP30       EXECUTE
                         MP31       CHANGE
                         MP32       DISPLAY
    TOTAL FORECAST       MP38       EXECUTE
                         MP33       REPROCESS
                         MP39       PRINT
                         MPBT       EXECUTE BACKGROUND
                         MPDR       PRINT BACKGROUND
    DEMAND MANAGEMENT
    PIR                  MD61       CREATE
                         MD62       CHANGE
                         MD63       DISPLAY
                         MD65       REQTS. FOR SCINARIO
                         MD66       COPY SIMULATED DEPENDENT REQT.
                         MD70       COPY TOTAL FORE CAST
    EVALUATION           MD73       DISPLAY TOTAL REQT.
                         MD79       EXCELL INTERFACE
                         MD4C       ORDER REPORT
                         MD72       CHARECTERISTICS PLANNING
    CUSTOMER REQT.       MD81       CREATE
                         MD82       CHANGE
                         MD83       DISPLAY
    REPETITIVE MANUFACTURING
    MASTER DATA          C223       PRODUCTION VERTION
    PRODUCT COST PLANNING
    COSTING RUN          CKMATSEL   CREATE
    SELECTION LIST       CKMATCON   Edit
                         CK40N      EDIT COSTING RUN
    Material Requirement Planning
    Menu Nodes           TransactionActivity
    Master Data          MD25       Create planning calendar
                         MD26       Change planning calendar
                         MD27       Display planning calendar
                         MDSA       Display BOM explosion number
                         MDSP       Edit BOM explosion number
                         MEQ1       Maintain quota file
                         OPPP       Explode BOM by date
                         MDUS       Display project assignment
                         MDUP       Process project assignment
                         MDL1       Create production lot
                         MDL2       Change production lot
                         MDL3       Display production lot
    Planning             MD20       Create planning file entry
                         MD21       Display planning file entry
                         MDAB       Set up planning file entry in background
                         MDRE       Check planning file entry
                         MD01       Total planning online
                         MDBT       Total planning in background
                         MD03       Single-item, single-level planning
                         MD02       Single-item, multi-level planning
                         MD43       Interactive single-item planning
                         MD50       Multi-level, make-to-order planning
                         MD51       Multi-level project planning
                         MF52       Display planning table
                         MF50       Change planning table
                         MF57       Planning table by MRP lists
                         MF51       Planning table by production list
    Evaluations          MD04       Stock/requirements list
                         MD07       Collective access of stock/requirements lis
                         MD05       MRP list
                         MD06       Collective access of MRP lists
                         MDLD       Print MRP list
                         MD45       Planning result
                         MD46       Collective access of planning result
                         MD44       Planning situation for a material
                         MD47       Planning situation for a product group
                         MD48       Cross-plant planning situation
                         MD4C       Order report
                         MD09       Pegged requirements
                         CO46       Order progress
    Planned Order        MD11       Create planned order
                         MD12       Change planned order
                         MD13       Individual access of planned order
                         MD16       Collective access of planned orders
                         MD14       Individual conversion of planned order into
                         MD15       Collective conversion of planned orders int
                         MDUM       Convert planned order into purchase requisi
                         CO40       Convert individual planned order into produ
                         CO41       Collective conversion of planned orders int
                         CO48       Partial conversion of planned order into pr
                         COR7       Individual conversion of planned order into
                         COR7_PC    Collective conversion of planned orders int
                         COR8       Partial conversion of planned order into pr
                         MDVP       Collective availability check
                         MDAC       Execute action for planned order
    LONG TERM PLANNING
    PALNNING SCENARIO    MS31       CREATE
                         MS32       CHANGE
                         MS33       DISPLAY
    PLANNING RUN         MS01       ON LINE
                         MSBT       SA BACKGROUND JOB
                         MS02       SINGLE ITEM - MULTI LEVEL
                         MS03       SINGLE ITEM - SINGLE LEVEL
                         MS50       SINGLE ITEM - SALES ORDER
                         MS51       SINGLE ITEM PLANNING, PROJECT
                         MFSO       PLANNING TABLE
    EVALUTIONS           MS05       MRP LIST MATERIAL
                         MS06       MRP LIST COLLECTIVE DISPLAY
                         MSLD       PRINT MRP LIST
                         MS04       STOCK/REQUIREMENTS LIST
                         MS07       STOCK/REQUIREMENT LIST COLLECTIVE DISPLAY
                         MS44       PLANNING SITUATION MATERIAL
                         MS47       SITUATION PRODUCT GROUP
    MPS-MASTER SCHEDULE ITEMS
    TOTAL PLANNING       MD40       ON LINE
                         MDBS       SA BACKGROUND JOB
                         MD41       SINGLE ITEM - MULTI LEVEL
                         MD42       SINGLE ITEM - SINGLE LEVEL
                         MD43       SINGLE ITEM - INTERACTIVE
                         MD50       SINGLE ITEM - SALES ORDER
                         MD51       SINGLE ITEM PLANNING, PROJECT
    EVALUTION IS SIMILAR TO MRP
    PRODUCTION CONTROL
    ORDER - CREATE       CO01       WITH MATERIAL
                         CO07       WITHOUT MATERIAL
                         CO40       FROM PLANNED ORDER
                         CO41       COLLECTIVE CONVERTION OF PLANNED ORDER
                         CO08       FOR SALES ORDER
                         CO10       FOR PROJECT
                         CO02       CHANGE
                         CO03       DISPLAY
    CONTROL              MD04       STOCK/REQUIREMENTS LIST
                         COHV       MASS PROCESSING
                         COMAC      COLLECTIVE AVAILABILITY CHECK
                         CO05N      COLLECTIVE RELEASE
                         CO04N      PRINT
                         CO09       AVAILABILITY OVER VIEW
    GOODS MOVEMENT       MF65       STOCK TRANSFER FOR RESERVATION
    MATERIAL STAGING     MF68       LOG
                         MB1A       GOODS ISSUE
                         MB31       GOODS RECEIPT
                         COWBPACK   PACK MATERIAL
    CONFIRMATION         CO1V       TIME TICKET
    FOR OPERATION        CO14       DISPLAY
                         CO13       CANCEL
                         CO1L       REQUESTED CONFIRMATIONS
                         CO1P       PREDEFINED PROCESSES
    TOOLS-ARCHIVING      CO78       ORDER
                         KOAA       SETTELMENT DOCUMENTS
    CAPACITY PLANNING
    EVALUTION            CM01       LOAD
    WORK CENTER VIEW     CM02       ORDERS
                         CM03       POOL
                         CM04       BACKLOG
                         CM05       OVERLOAD
                         CM07       VARIABLE
    EXTENDED EVALUTION   CM50       WORK CENTER VIEW
                         CM51       INDIVIDUAL CAPACITY VIEW
                         CM52       ORDER VIEW
    LEVELLING            CM21       PLANNING TABLE (GRAPHICAL)
    WORK CENTER VIEW     CM22       PLANNING TABLE (TABULAR)
    INDIVIDUAL CAPACITY VCM27       PLANNING TABLE (GRAPHICAL)
                         CM28       PLANNING TABLE (TABULAR)
    ORDER VIEW           CM31       PLANNING TABLE (GRAPHICAL)
                         CM32       PLANNING TABLE (TABULAR)
    AVAILABLE CAPACITY   CR12       CHANGE
    CAPACITY             CR13       DISPLAY
                         OP4A       SHIFT SEQUENCE
                         OP43       FACTORY CALENDER
    <b>QM</b>
    Q000    Quality management
    QA00    Quality inspection
    QA01    Create Inspection Lot
    QA01A   Create Inspection Lot
    QA02    Change Inspection Lot
    QA02A   Change Inspection Lot
    QA03    Display inspection lot
    QA05    Job planning: Periodic inspection
    QA06    Job overview: Periodic inspection
    QA07    Trigger for recurring inspection
    QA07L   Deadline Monitoring Log
    QA08    Collective Processing of Insp. Setup
    QA09    No. range maintenance for insp.lots
    QA10    Trigger automatic usage decision
    QA10L   Log for Automatic Usage Decision
    QA11    Record usage decision
    QA12    Change usage decision with history
    QA13    Display usage decision
    QA14    Change UD without history
    QA16    Collective UD for accepted lots
    QA17    Job planning for auto usage decision
    QA18    Job overview for auto usage decision
    QA19    Automatic usage decision
    QA22    Change inspection point quantities
    QA23    Display insp.point quantities
    QA32    Change data for inspection lot
    QA32WP  QA32 -Call from Workplace/MiniApp
    QA33    Display data for inspection lot
    QA40    Auto. Usage Decision for Production
    QA40L   Log for Automatic Usage Decision
    QA41    Scheduling UD for Production Lots
    QA42    Job planning: UD prod. insp.lots
    QA51    Scheduling Source Inspections
    QA52    Source inspections: Job overview
    QAC1    Change insp. lot actual quantity
    QAC2    Transfer stock to insp. lot
    QAC3    Reset sample
    QAER    Display archive objects
    QAS1    Download Insp. Specs. (Obsolete)
    QAS2    Download Basic Data (Obsolete)
    QAS3    Upload Results (Obsolete)
    QAS4    Upload UD (Obsolete)
    QC01    Create certificate profile
    QC02    Change certificate profile
    QC03    Display certificate profile
    QC06    Immediate delete of cert. profiles
    QC11    Create cert. profile assignment
    QC12    Change cert. profile assignment
    QC13    Display cert. profile assignment
    QC14    Create cert.prof.assign.w/copy model
    QC15    Create cert. profile assignment
    QC16    Change cert. profile assignment
    QC17    Display cert. profile assignment
    QC18    Create cert.prof.assign.w/copy model
    QC20    Certificates for Deliveries
    QC21    Quality certificate for the insp.lot
    QC22    Quality Certificate for Batch
    QC31    Archive display: Delivery item
    QC32    Archive display: Inspection lot
    QC40    Internet Certificate for Delivery
    QC40A   Internet Certificate for Delivery
    QC42    Batch certificate on WWW
    QC51    Create certificate in procurement
    QC52    Change certificate in procurement
    QC53    Display certificate in procurement
    QC55    Worklist: Certificates - Procurement
    QCC0    QM: Direct Access to IMG
    QCC1    Direct Access to IMG: Notification
    QCC2    IMG Direct Access: QM Q-Notification
    QCC3    IMG Direct Access: QM Q-Inspection
    QCC4    IMG Direct Access: QM Q-Planning
    QCC5    IMG Direct Selection: QM Bus. Add-In
    QCC_STABI       Copy Stability Study Customizing
    QCC_STABI_NK    Copy Stability Study Number Ranges
    QCCC    QM standard settings complete
    QCCF    QM standard forms
    QCCK    QM standard settings: Catalogs
    QCCM    QM std. settings: Qual. notifs.
    QCCN    QM standard number ranges
    QCCP    QM std. settings: Quality planning
    QCCS    QM sampling schemes
    QCCT    QM standard texts
    QCCU    QM standard settings: Environment
    QCCW    QM std. settings: Quality inspection
    QCCY    Transport QM tolerance key
    QCCZ    QM std. settings: Qual. certificates
    QCE2    Edit Communication Support
    QCE3    Display Communication Support
    QCYF    QM standard forms (general)
    QCYT    QM standard texts (general)
    QD21    Mark completed notifications
    QD22    Archiving Notifications: Archive
    QD24    Archiving Notifications: Delete
    QD25    Archiving Notifications: Admin.
    QD33    Delete quality level
    QD34    Delete quality level planning
    QD35    Delete job overview for Q-levels
    QDA1    Edit sampling type
    QDA3    Display sampling type
    QDB1    Maintain allowed relationships
    QDB3    Display allowed relationships
    QDH1    Q-level evaluation: Change data
    QDH2    Q-level evaluation: Display data
    QDL1    Create quality level
    QDL2    Change quality level
    QDL3    Display quality level
    QDM1    Edit valuation mode
    QDM3    Display valuation mode
    QDP1    Create sampling scheme
    QDP2    Change sampling scheme
    QDP3    Display sampling scheme
    QDR1    Create dynamic modification rule
    QDR2    Change dynamic modification rule
    QDR3    Display dynamic modification rule
    QDR6    Disp. where-used list-dyn. mod. rule
    QDR7    Replace dynamic mod. rule used
    QDV1    Create sampling procedure
    QDV2    Change sampling procedure
    QDV3    Display sampling procedure
    QDV6    Uses: Sampling procedures
    QDV7    Replace sampling procedure used
    QE00    Quality Planning
    QE01    Record characteristic results
    QE02    Change characteristic results
    QE03    Display characteristic results
    QE04    Record sample results
    QE05    Change sample results
    QE06    Display sample results
    QE09    Indiv.display of charac.result
    QE09WP  Call QE09 from Workplace
    QE11    Record results for inspection point
    QE12    Change results for inspection point
    QE13    Display results for inspection point
    QE14    Record results for delivery note
    QE15    Change results for delivery note
    QE16    Display results for delivery note
    QE17    Record results for equipment
    QE18    Change results for equipment
    QE19    Display results for equipment
    QE20    Record results for funct. location
    QE21    Change results for funct. location
    QE22    Display results for funct. location
    QE23    Record results for phys. sample
    QE24    Change results for phys. sample
    QE25    Display results for phys. sample
    QE29    No. Range Maint.: Conf. No. for Char
    QE51    Results recording worklist
    QE51N   Results Recording Worklist
    QE52    Worklist: Results for phys. sample
    QE53    Worklist: Record results for equip.
    QE54    Worklist: Results for funct. loctns
    QE71    Tabular res. recording for insp. pts
    QE72    Tabular Results Rec. for Insp. Lots
    QE73    Tabular res. recording for characs.
    QEH1    Worklist for Mobile Results Rec.
    QEI1    Displaying QM Interfaces Appl. Log
    QEI2    Deleting QM Interfaces Appl. Log
    QEW01   Results Recording on Web
    QEW01V  Variant Maint.: Recording on Web
    QF01    Record defect data
    QF02    Change defect data
    QF03    Display defect data
    QF11    Record defects for inspection lot
    QF21    Record defects for operation
    QF31    Record defects for characteristic
    QG09    Maint. num. range Q control charts
    QGA1    Display quality score time line
    QGA2    Display inspection results
    QGA3    Print inspection results
    QGC1    Qual. control charts for insp. lots
    QGC2    Control charts for task list charac.
    QGC3    Control charts for master insp. char
    QGD1    Test Equipment Usage List
    QGD2    Test Equipment Tracking
    QGP1    Results history for task list charac
    QGP2    Results History for Task List Charac
    QI01    Create quality info. - purchasing
    QI02    Change qual.information - purchasing
    QI03    Display quality info. - purchasing
    QI04    Job planning for QM procurement keys
    QI05    Mass maintenance QM procurement keys
    QI06    QM Releases: Mass maintenance
    QI07    Incoming insp. and open pur. orders
    QI08    Job overview of QM procurement keys
    QISR    Internal Service Request
    QISR1   Internal Service Request - Forms
    QISR_PCR60      vc_scenario for Message type 60(PCR)
    QISR_SM29       ISR Customizing: Table Transfer
    QISR_SR12_START Suggestion System
    QISRSCENARIO    Customizing Szenario
    QISRTRANSPORT   ISR Customizing Transport
    QISRW   Internal Service Request on the Web
    QK01    Assign QM order to material
    QK02    Display assigned QM orders
    QK03    Maintain specs. for order type
    QK04    Create QM order
    QK05    Confirmed activities for insp. lot
    QL11    Mat: Distribute Inspection Setup-ALE
    QL21    Master Inspection Characs (ALE)
    QL31    Distribute Inspection Methods (ALE)
    QL41    Distribute Code Groups (ALE)
    QM00    Quality Notifications
    QM01    Create quality notification
    QM02    Change quality notification
    QM03    Display quality notification
    QM10    Change list of quality notifications
    QM10WP  QM10 - Call from Workplace/MiniApp
    QM11    Display List of Qual. Notifications
    QM12    Change list of tasks
    QM13    Display list of tasks
    QM13WP  QM13 - Call from  Workplace/MiniApp
    QM14    Change list of items
    QM15    Display list of items
    QM16    Change activity list
    QM17    Display activity list
    QM19    List of Q Notifications, Multi-Level
    QM50    Time line display Q notifications
    QMW1    Create quality notification (WWW)
    QP01    Create
    QP02    Change
    QP03    Display
    QP05    Print inspection plan
    QP06    List: Missing/unusable insp. plans
    QP07    List: Missing/Unusable GR InspPlans
    QP08    Print task lists for material
    QP11    Create reference operation set
    QP12    Change reference operation set
    QP13    Display reference operation set
    QP48    Number Ranges for Physical Samples
    QP49    Number range for phys. samp. drawing
    QP60    Time-related development of plans
    QP61    Display change documents insp.plan
    QP62    Change documents ref.operation sets
    QPIQS8  QM MiniApp Selection Variant
    QPIQS9  QM MiniApp Selection Variant
    QPNQ    Number ranges for inspection plans
    QPQA32  QM MiniApp Selection Variant
    QPQGC1  QM MiniApp Selection Variant
    QPQM10  QM MiniApp Selection Variant
    QPQM13  QM MiniApp Selection Variant
    QPR1    Create physical sample
    QPR2    Change physical sample
    QPR3    Display physical sample
    QPR4    Confirm physical sample drawing
    QPR5    Manual inspection lots for physSamps
    QPR6    Create new phys.-samp. drawing w.ref
    QPR7    Storage Data Maintenance
    QPV2    Maintain sample drawing procedure
    QPV3    Display sample drawing procedure
    QS21    Create master insp. characteristic
    QS22    Create master insp. charac. version
    QS23    Change master insp. charac. version
    QS24    Display master insp. charac. version
    QS25    Delete master insp. charac. version
    QS26    Display characteristic use
    QS27    Replace master insp. characteristic
    QS28    Display insp. charac. list
    QS29    Maintain characteristic number range
    QS31    Create inspection method
    QS32    Create inspection method version
    QS33    Change inspection method version
    QS34    Display inspection method version
    QS35    Delete inspection method version
    QS36    Display inspection method use
    QS37    Central replacement of methods
    QS38    Display inspection method list
    QS39    Maintain method number range
    QS41    Maintain catalog
    QS42    Display catalog
    QS43    Maintain catalog
    QS44    Maintain catalog
    QS45    Display catalog
    QS46    Display code group use
    QS47    Central replacement of code groups
    QS48    Usage indicator - code groups
    QS49    Display code groups and codes
    QS4A    Display catalog
    QS51    Edit Selected Sets
    QS52    Display selected set index
    QS53    Maintain individual selected set
    QS54    Maintain selected set
    QS55    Display selected set
    QS58    Usage indicator - selected sets
    QS59    Display selected sets
    QS61    Maintain material specification
    QS62    Display material specification
    QS63    Maintain material spec: Planning
    QS64    Display material spec: For key date
    QS65    Activate material specification
    QS66    Plan activation of material spec.
    QS67    Job overview: Activate mat. spec.
    QSR5    Archive inspection plans
    QSR6    Delete routings
    QST01   Create Stability Study
    QST03   Display Stability History
    QST04   Display Inspection Plans
    QST05   Graphical Scheduling Overview
    QST06   Scheduling Overview (StabilityStudy)
    QST07   Change Testing Schedule Items
    QST08   Display Testing Schedule Items
    QSUB    Define subsystems
    QT00    Test Equipment Management
    QT01    Test equipment management
    QTSA    Product Allocations: Send Quantities
    QTSP    Product Allocations:Send Customizing
    QUERY_BP_FSBPBILDER     BP: Screen Customizing for Query
    QV01    Create quality assurance agreement
    QV02    Change quality assurance agreement
    QV03    Display quality assurance agreement
    QV04    Find Quality Assurance Agreement
    QV11    Create technical delivery terms
    QV12    Change technical delivery terms
    QV13    Display technical delivery terms
    QV14    Search technical terms of delivery
    QV21    Create QA agreement (DocType Q03)
    QV22    Change Q-agreement (doc. type Q03)
    QV23    Display Q-agreement (doc. type Q03)
    QV24    Find Q-agreement (doc. type Q03)
    QV31    Create Q-spec. (doc.type Q04)
    QV32    Change Q-specification (docType Q04)
    QV33    Displ. Q-specification (docType Q04)
    QV34    Find Q-specification (doc. type Q04)
    QV51    Create control for QM in SD
    QV52    Change control for QM in SD
    QV53    Display control for QM in SD
    QVM1    Inspection lots without completion
    QVM2    Inspection lots with open quantities
    QVM3    Lots without usage decision
    QZ00    Quality Certificates
    If usefule , please reward points.

  • BOM Display in CS11/CS12 with BOM status "3"

    Hi,
    Just wanted to know if it is possible to display BOM using CS11/CS12 with BOM status "3"- Active with history requirement.
    Your quick reply is appreciated.
    Thanks
    Nitin
    Edited by: Nitin Pandhare on Jun 16, 2011 10:16 AM

    No, it doesn't display the BOM in CS11/CS12 which has BOM status '3' (Active with history requirement). It always give an error message " The BOM is not effective on current date" though the BOM exists in the system and has the history within the validity period. If you try, it also gives the same error message even if the BOM status is Inactive (2').  I guess it works only for the BOM, which has status "1" (Active).
    May I request you to try at your end as well and let me know.
    Thanks for your help and sharing your views.
    Regards,
    Nitin

  • Bom explosion cs11

    hi
    i maintained bom for final assembly in 6000 plant.in final assembly bom sub assembly is a componenet in 6000 plant and i maintained subassembly bom in 6000 plant and 1000 plant. the problem is when i explode bom in cs11 multilevel. system takes sub assembly bom in 1000 plant.
    note:
    component of sub assembly in 1000 plant and 6000 plant are different.
    how can i solve this.
    i want to explode only 6000 plant material

    Hi,
    Before that Please let me Know  whether  u  have created the Group BOM and extented to plant 6000, 1000.
    Inthat case if have change the Bom in any one plant, it will affect the all the plants.
    Please check the BOM components for plant 1000, 6000 at CS03.
    Pradeep
    Edited by: Pradeep Kumar on May 24, 2008 3:03 PM

  • Hello logic for level in BOM component explosure . like in CS11 , CS12

    Hello all,
    i have all the material and the components for the material in an internal table .
    Now i am not getting the logic for getting the level number of the component.
    Now i am having the data in an internal table as in CS11 ,with out the yellow record which represents the header of the components .
    Can any one please help me on this .
    Thanks and regards ,
    Prem

    better to use the fn module
    DATA : BEGIN OF I_BOM OCCURS 0.
            INCLUDE STRUCTURE STPOX.
    DATA : END OF I_BOM.
    CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
        EXPORTING
          CAPID                 = 'PP01' " application area
          DATUV                 = SY-DATUM
          MEHRS                 = 'X' " for multi level bom explosion
          MTNRV                 = P_MATNR "Header material
          WERKS                 = P_WERKS " Plant
        TABLES
          STB                   = I_BOM
        EXCEPTIONS
          ALT_NOT_FOUND         = 1
          CALL_INVALID          = 2
          MATERIAL_NOT_FOUND    = 3
          MISSING_AUTHORIZATION = 4
          NO_BOM_FOUND          = 5
          NO_PLANT_DATA         = 6
          NO_SUITABLE_BOM_FOUND = 7
          CONVERSION_ERROR      = 8
          OTHERS                = 9.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    here in i_bom-stufe  is the level of the bom.
    regards
    shiba dutta

Maybe you are looking for

  • PDF not opening in browser Mac

    Until FF 36 I had a plugin to open pdf in browser. But I notice the PC version didn't need it. Now the plug in no longer works on the Mac and neither do any others. Every single PDF downloads. It appears the Mac users have been left out of whatever c

  • Basic questions about Mapviewer for OBIEE 11G

    Hello All.. I am pretty rookie in OBIEE and I have never worked with Mapviewer before.. I am going some POC right now in my environment and I want to experiment map reports in OBIEE.. My current OBIEE version is 11.1.1.6.5, Oracle DB version is 11.2.

  • How to use the "split development directory structure" in JBuilder9 ?

    How to use the "split development directory structure" in JBuilder9 ? Have /APP-INF supported ?

  • Jndi problem

    Hi, I have to write a simple application that uses jndi to get a jdbc connection. I'll try to explain step by step everything what I did. I used Tomcat 5.5.12, SQL Server 2000. 1. I created a simple web app "jndi" and next I put the jdbc lib to the W

  • 2d Graphics Help

    Wondering if there was a way for me to set a image as a background in a JPanel. Image mapImage = Toolkit.getDefaultToolkit().getImage("usMap.gif"); Container content = getContentPane(); content.setBackground(mapImage); Is this possible?