CS13 ----- will it show only parts with procurement type F ?

Hi,
I have a basc issue
when we execute CS13 it summarises teh BOm and show the Bom component and quantity .
will it show only parts with procurement type F ?
when we execute CS13 for a finished product , its not displaying all the BOM components , the list is displaying only few
what might be the reason
will it show the parts only directly linked to it at the first level ?
regards,
madhu kiran.

Hi,
CS13 shows summarize BOM that mean it leaves out all the intermediate BOMs(sub assemblies) and displays on the end components. End component need not have procurement type F.
It will display End components in the any level.
To simply cross check, in CS12 add colum Assembly indicator and filter only those components having blank value. You will get report displayed as that of CS13.
Regards,
Krishna Mohan

Similar Messages

Show only contacts with phone

I have iPhone 5S and I have a lot contacts, but several of them don´t have phone number, only email.
I would like to show only contacts with phone number. Is it possible?

No.

List Format: can it show only days with events?

Is there a way to print a list of a calendar's events so it will ONLY show the days with events? I can get a list print, but it lists even the days that don't have anything on them. For example, I subscribed to a football calendar and would now like to print a concise schedule of just the game days.
I feel like I am missing something obvious, but after reading some of this forum, maybe its not possible yet. Should I give up? I appreciate your help!

Hi,
CS13 shows summarize BOM that mean it leaves out all the intermediate BOMs(sub assemblies) and displays on the end components. End component need not have procurement type F.
It will display End components in the any level.
To simply cross check, in CS12 add colum Assembly indicator and filter only those components having blank value. You will get report displayed as that of CS13.
Regards,
Krishna Mohan

I downloaded audiobook from iTunes. It comes in 2 parts. Part one will not play, only part 2. When I tried to sync to ipod or iphone it prompted,"file could not be reaf from or written to".Can I fix this issue?

I just purchased and downloaded an audiobook from iTunes. I tried to sync it to iPhone 4 and iPod Classic but with both devices got a message"file could not be read from to written to". Then I tried to play the audiobook in iTunes and realized that only part 2 of my 2 part download will play. Part 1 will not play. Is this why I got the message? Is there any way to get another try at downloading my audiobook I just paid $15 for??

Click the Shuffle button at bottom left of iTunes window so the crossed arrows are not blue.

Configuring active x container to show only part of a web page (net camera)

I've been working on an interface controlling a goniometer for crystal alignment.
A NETcam has been plugged into the network and streams a live image from the equipment being moved by the controls.
I need to integrate the NETcam into the control panel.
I've managed to do this but the actual NETcam has a built in homepage on it with few custom features to ammend a custom page fully.
I am stuck with the streaming image in the middle of a web page from the active x window.
Is there any way I can cut out part of a web page to view only a certain area of it with no scroll bars aswell? The cam is an AXIS2100.
James.

James,
Take a look at the code for the web page. You may find that the camera is itself either another URL, or an image that is part of the page. I haven't worked with this type of data before, but I have worked extensively with web content and HTML, as well as browsers.
You can try several things. If the camera has a URL, use datasocket to link to that. If the image is a separate link, which you can tell by right clicking on the webcam image and clicking "save link as...", then you can setup your browser to look at this image only.
If you can, post the URL for the page you are having problems with, or email me the source for it, and I will try to help.
Good luck

Show only part of a list in dependencies of a node

I have a XMLlistCollection who shall fill up my Applikation.
In some views I only want to show a part of all entries. Equivalent
to a mysql query where I can say: give me all where myNode contains
this string.
Is there a way to to so? I did a research since 3h, but I'm
sure for what to search.
Any hint would be appreciated.
Michael

Look into "filter" for collections.
For XML, use e4x expressions.
Tracy

MacBook shows only folder with ?. Replaced hard drive with same results.

In the midst of some work the machine simply clicked and showed a folder with a ?. Would not restart. Replaced the drive with a new 7200 Seagate momemtum, 320GB, installed the software, and have the same problem with startup. A folder with a ? Connect another machine via firewire and looked at the MacBook drive and it showed the appropriate system folders. Then started the other computer from the MacBooks hard drive and that worked. So the drive appears healthy but we cannot get it started on its own. In Disk Utility the new drive is indicated as not owner enabled, whatever that means. It appears most Macs that work are, in fact, owner enabled. Anybody have a clue what might be going on here? We're thinking maybe the first drive had not failed and the problem lies elsewhere.

As an FYI, here is the apparent solution. The original drive did fail. Because the disks were in Seattle and we were attempting to fix it in Dallas we connected via Firewire to a PowerPC machine and formatted the drive. That was the crucial error. the G4 did not give the appropriate Intel-based Mac formatting options. So we could look at the drive from the G4 and see everything was there, but the MacBook could not boot itself because it could not read the disk which was improperly formatted. The Genius bar in Seattle figured this out and reformatted the disk at no cost.
All's well that ends well, but have Macs really become that complicated?

CK11n with procurement type X

i have a material that can be purchased or manufactured. at costing time, i want the system to ALWAYS use the purchase cost (planned price 1).
if i set the material to be purchased with producrement type F, the cost is correct, so my costing is fine, but when i set procurement type to "X", it uses the manufactured cost.
I have set up a quota arrangement, and coded the material master to use the quota arrangement.
I have not seen anything in the valuation variant for costing to specify a quota arrangement, except for subcontracting, and this is NOT subcontracting, it is a direct purchase.
any ideas on how i can make the system use the purchase cost, rather than the manufactured one, for CK11n?

Dear David,
Though I'm not from a CO Module,but let me share my comments.
1.Materials which has a procurement type as X will be a split valuated material.So whenever you do any material document posting
the system asks on which value it has to consider.Because in this case for Inhouse it may be having a value of 10 $ and for a
externally procured/sub-contracted may be having a value less than or greater than 10 $.
2.During costing for such materials,you can use a different costing variant which will be linked to a costing variant where you can
give the priority to the values that the system should consider,goto OKKN and check.
Check and revert back.
Regards
Mangalraj.S

REM with Procurement type "X"

Hi experts,
In repetitive mfg, we want to plan a component which is sometimes made in-house or procured from vednor.
Hence, for the component, we want to get planned oder for total requirement.
The same planned order can be convertable to Pur request or can be used for REM GR posting.
Request to guide.
Regards
Nitin

Hi Nitin,
you cannot convert planned order to Pur req/ Prod .order in REM , since it has PE order Type. In your case, u want to use same planned order for Both inhouse and external, it is also not possible.
if you know, how much percentage in total requirement , to be produced in Inhouse and External , u can create two production versions and use quota Arrangement.
u can assign procurement type and percentage for each production version.
MRP run create both planned order and pur requistion as per percentage has given.
other wise u have to create Pur req manullay.
please come back if required more details.
regards
pradeep

How can i make that in the ComboBox control it will show only part of each item name without the Win32_ in the start of each item ?

This is my form1 code:
using System;
using System.Collections;
using System.Management;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
namespace GetHardwareInfo
public partial class frmMain : Form
public frmMain()
InitializeComponent();
cmbxOption.SelectedItem = "Win32_Processor";
cmbxStorage.SelectedItem = "Win32_DiskDrive";
cmbxMemory.SelectedItem = "Win32_CacheMemory";
cmbxSystemInfo.SelectedItem = "";
cmbxNetwork.SelectedItem = "Win32_NetworkAdapter";
cmbxUserAccount.SelectedItem = "Win32_SystemUsers";
cmbxDeveloper.SelectedItem = "Win32_COMApplication";
cmbxUtility.SelectedItem = "Win32_1394Controller";
private void InsertInfo(string Key, ref ListView lst, bool DontInsertNull)
lst.Items.Clear();
ManagementObjectSearcher searcher = new ManagementObjectSearcher("select * from " + Key);
try
foreach (ManagementObject share in searcher.Get())
ListViewGroup grp;
try
grp = lst.Groups.Add(share["Name"].ToString(), share["Name"].ToString());
catch
grp = lst.Groups.Add(share.ToString(), share.ToString());
if (share.Properties.Count <= 0)
MessageBox.Show("No Information Available", "No Info", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
foreach (PropertyData PC in share.Properties)
ListViewItem item = new ListViewItem(grp);
if (lst.Items.Count % 2 != 0)
item.BackColor = Color.White;
else
item.BackColor = Color.WhiteSmoke;
item.Text = PC.Name;
if (PC.Value != null && PC.Value.ToString() != "")
switch (PC.Value.GetType().ToString())
case "System.String[]":
string[] str = (string[])PC.Value;
string str2 = "";
foreach (string st in str)
str2 += st + " ";
item.SubItems.Add(str2);
break;
case "System.UInt16[]":
ushort[] shortData = (ushort[])PC.Value;
string tstr2 = "";
foreach (ushort st in shortData)
tstr2 += st.ToString() + " ";
item.SubItems.Add(tstr2);
break;
default:
item.SubItems.Add(PC.Value.ToString());
break;
else
if (!DontInsertNull)
item.SubItems.Add("No Information available");
else
continue;
lst.Items.Add(item);
catch (Exception exp)
MessageBox.Show("can't get data because of the followeing error \n" + exp.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
private void RemoveNullValue(ref ListView lst)
foreach (ListViewItem item in lst.Items)
if (item.SubItems[1].Text == "No Information available")
item.Remove();
#region Control events ...
private void cmbxNetwork_SelectedIndexChanged(object sender, EventArgs e)
InsertInfo(cmbxNetwork.SelectedItem.ToString(), ref lstNetwork, chkNetwork.Checked);
private void cmbxSystemInfo_SelectedIndexChanged(object sender, EventArgs e)
InsertInfo(cmbxSystemInfo.SelectedItem.ToString(), ref lstSystemInfo, chkSystemInfo.Checked);
private void cmbxUtility_SelectedIndexChanged(object sender, EventArgs e)
InsertInfo(cmbxUtility.SelectedItem.ToString(), ref lstUtility, chkUtility.Checked);
private void cmbxUserAccount_SelectedIndexChanged(object sender, EventArgs e)
InsertInfo(cmbxUserAccount.SelectedItem.ToString(), ref lstUserAccount, chkUserAccount.Checked);
private void cmbxStorage_SelectedIndexChanged(object sender, EventArgs e)
InsertInfo(cmbxStorage.SelectedItem.ToString(), ref lstStorage, chkDataStorage.Checked);
private void cmbxDeveloper_SelectedIndexChanged(object sender, EventArgs e)
InsertInfo(cmbxDeveloper.SelectedItem.ToString(), ref lstDeveloper, chkDeveloper.Checked);
private void cmbxMemory_SelectedIndexChanged(object sender, EventArgs e)
InsertInfo(cmbxMemory.SelectedItem.ToString(), ref lstMemory, chkMemory.Checked);
private void chkHardware_CheckedChanged(object sender, EventArgs e)
if (chkHardware.Checked)
RemoveNullValue(ref lstDisplayHardware);
else
InsertInfo(cmbxOption.SelectedItem.ToString(), ref lstDisplayHardware, chkHardware.Checked);
private void cmbxOption_SelectedIndexChanged(object sender, EventArgs e)
InsertInfo(cmbxOption.SelectedItem.ToString(), ref lstDisplayHardware, chkHardware.Checked);
private void chkDataStorage_CheckedChanged(object sender, EventArgs e)
if (chkDataStorage.Checked)
RemoveNullValue(ref lstStorage);
else
InsertInfo(cmbxStorage.SelectedItem.ToString(), ref lstStorage, chkDataStorage.Checked);
private void chkMemory_CheckedChanged(object sender, EventArgs e)
if (chkMemory.Checked)
RemoveNullValue(ref lstMemory);
else
InsertInfo(cmbxMemory.SelectedItem.ToString(), ref lstStorage, false);
private void chkSystemInfo_CheckedChanged(object sender, EventArgs e)
if (chkSystemInfo.Checked)
RemoveNullValue(ref lstSystemInfo);
else
InsertInfo(cmbxSystemInfo.SelectedItem.ToString(), ref lstSystemInfo, false);
private void chkNetwork_CheckedChanged(object sender, EventArgs e)
if (chkNetwork.Checked)
RemoveNullValue(ref lstNetwork);
else
InsertInfo(cmbxNetwork.SelectedItem.ToString(), ref lstNetwork, false);
private void chkUserAccount_CheckedChanged(object sender, EventArgs e)
if (chkUserAccount.Checked)
RemoveNullValue(ref lstUserAccount);
else
InsertInfo(cmbxUserAccount.SelectedItem.ToString(), ref lstUserAccount, false);
private void chkDeveloper_CheckedChanged(object sender, EventArgs e)
if (chkDeveloper.Checked)
RemoveNullValue(ref lstDeveloper);
else
InsertInfo(cmbxDeveloper.SelectedItem.ToString(), ref lstDeveloper, false);
private void chkUtility_CheckedChanged(object sender, EventArgs e)
if (chkUtility.Checked)
RemoveNullValue(ref lstUtility);
else
InsertInfo(cmbxUtility.SelectedItem.ToString(), ref lstUtility, false);
private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)
linkLabel1.LinkVisited = true;
System.Diagnostics.Process.Start("http://www.test.net");
#endregion
What i get is in the end that in the ComboBox in this case i call it cmbxNetwork i see in it many items all start with Win32_ For example when i click on ComboBox i see the first item is: "Win32_NetworkAdapter"
Instead Win32_NetworkAdapter i want to see in the ComboBox only: NetworkAdapter But when i select the item it should be selected as Win32_NetworkAdapter but the user should see and select only NetworkAdapter.
I want to remove as test from the ComboBox items the Win32_ But only that the user will see it without Win32_
Also in the constructor when i'm doing now: cmbxNetwork.SelectedItem = "Win32_NetworkAdapter"; so instead if i'm doing: cmbxNetwork.SelectedItem = "NetworkAdapter"; it will be enough. THe program will use the "Win32_NetworkAdapter";
but again what i see and user in the ComboBox as item is only the NetworkAdapter

Hi Chocolade1972,
>> I want to remove as test from the ComboBox items the Win32_ But only that the user will see it without Win32_ Also in the constructor when i'm doing now: cmbxNetwork.SelectedItem = "Win32_NetworkAdapter"; so instead if i'm doing:
cmbxNetwork.SelectedItem = "NetworkAdapter";
Do you mean that you want the ComboBox show the value of “NetworkAdapter” in the text, but when you refer the value of the cmbxNetwork.SelectedItem, it will be “Win32_NetworkAdapter”? If so, I am afraid that you need create your own ComboboxItem and override
the ToString() method to return the text you want.
You could modify the code below for your own achievement.
public partial class Form0417 : Form
public Form0417()
InitializeComponent();
public class ComboboxItem
public string Text { get; set; }
public object Value { get; set; }
public override string ToString()
return Text;
private void Form0417_Load(object sender, EventArgs e)
ComboboxItem item1 = new ComboboxItem();
item1.Text = "Processor";
item1.Value = "Win32_Processor";
ComboboxItem item2 = new ComboboxItem();
item2.Text = "DiskDrive";
item2.Value = "Win32_DiskDrive";
cmbxOption.Items.Add(item1);
cmbxOption.Items.Add(item2);
//MessageBox.Show((cmbxOption.SelectedItem as ComboboxItem).Value.ToString());
private void cmbxOption_SelectedIndexChanged(object sender, EventArgs e)
MessageBox.Show((cmbxOption.SelectedItem as ComboboxItem).Value.ToString());
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Event Library will not show External HD with the current project.

Problem opening the project I'm working on...I start FCPX and the Event Library quickly shows the external hd with the current project I want but only for a slit second, then it fires up a error message(the I can't possibly read) and acts as if the hd doesn't exist. I can see the hd on the desktop(share is on) and the drive is partitioned, with one of the parts as a Time Machine BU(but I have turned TM off).
Tried:
permissions
restarting
moving file to main drive
moving file to another drive that isn't a TM drive
Thanks in advance for any advice

It's been documented that Time Machine drives cannot be used with FCPX (they disappear just like you are talking about). However, I would genuinely be surprised if you couldn't partition a drive so that one partition is devoted to TM and the other to FCPX, as the two partitions should be seen as two separate drives.
That said, when FCPX sees the TM drive partition, it might do something that dismounts the other partition from its view as well. For example, it might look at a drive-level identifier and decide that anything with that identification is not suitable for FCPX.
Give this a try -- eject the TM drive partition in the Finder prior to opening FCPX. So you should only have in the Finder the partition you are using with FCPX. To be safe, reboot before trying all of this.
EDIT - then open FCPX and see if you can see the drive and it stays visible.

Desktop shows only Icons with WEBLOC how to change these names to the website names

In the latest vesion downloaded in Mavericks, all my web Icons on my desktop changed to a blue pictue with WEBLOC in the middle. How can I remove
those WEBLOC icons and replace with my web icons from my websites?? I normally just drag the web icon from the address bar to desk top and click it.
Now all of them only will show the Icon webloc? This happened on the last download version. I had ask someone in apple chat about this, and
got cut off and they have never responded to me, its been a week?? Poor chat service.

Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.finder.plist and com.apple.desktop.plist. Move the .plists to your desktop.
Re-launch Finder by restarting the computer and test. If it works okay, delete the plists from the desktop.
If the same, return the .plists to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

I purchased a new vehicle with a USP port but my nano model A199 will not work, only works with the aux plug which will not allow me to view the songs on the vehicle touchscreen. Is there a download I can get to put into this nano?

I purchased a new vehicle and the older ipod nano I have will not work through the USP port, only works through the aux plug. Is there a download i can get toput into the nano that will then allow me to use the USP port instead of the aux port?

Check with your dealer and see if there is a special cable available for connecting your iPod. It should have a dock connector on one end and USB and miniplug on the other.

IPhoto loads but stalls and will not show photos. With Yosemite

After upgrading to Yosemite recently suddenly iPhoto loads, shows list of albums but will not open albums, just get that whirly thing forever.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How show ONLY images with problems or needing metadata update, etc?

In LR3, how do I show JUST the images that are waiting for a metadata update on disk?
Or, more importantly, how do I show images that have a problem - the little box on the top right of the thumbnail with the exclamation point.
If I have a dozen images out of 50,000 that have an error with "another process has updated the metadata" I want to see JUST THOSE IMAGES
so I can fix the problem...
How do I do this?

Dave, there are two related issues:
- LR appears to have a number of problems correctly identifying which images have metadata conflicts between the catalog and the files proper:
http://feedback.photoshop.com/photoshop_family/topics/lr_3_5rc_reproducible_spurious_metad ata_file_needs_to_be_updated
- LR has no mechanism that allows you to identify just those images with metadata conflicts:
http://feedback.photoshop.com/photoshop_family/topics/metadata_collisions_between_catalogu e_and_files
Please visit these feedback topics and add your vote and opinion. Adobe pays closer attention to the feedback forum than this one.

CS13 ----- will it show only parts with procurement type F ?

Similar Messages

Maybe you are looking for