CS2 Always asks for Registration

I recently had to replace my computer (old one started smoking).  So I went with a 64 bit machine with Vista 64bit.  My reinstall of CS2 went well (upgrading to a 64 bit version will have to wait but not too long I hope:-).  Activation was OK; registration said it succeeded as well.  But every time I start Photoshop it says I have not registered it and it asks me to do it again.  I have tried to complete the form three times now and it always says it succeeded.  Then the next time I start I bet the registration dialog box again.
What can I do to satisfy CS2?
Thanks,
Ian

You need to turn off User Account Control (UAC) off before you register it. If desired, UAC can be turned back on after you register CS2.

Similar Messages

  • When I go to update my software using the app store download, it always asks for the previous user's ID, not mine.  Please help!

    When I go to update my software using the app store download, it always asks for the previous user's ID, not mine (my IT guy at school's-I am a faculty with admin priviledges).  I have signed in as me, have set the main preferences login user as me,and everywhere on the laptop I can use my apple ID except here.  It always shows me a greyed out ID of my IT.  How can I reset this to my ID? It doesn't give me an option to change the user ID, only a link to reset password.  I reset it, but it did not change the problem.  Can someone help me?

    It's not an ID problem, it's an ownership problem.
    When someone uses their personal Apple ID to buy and download content, the content is licensed to them and has their Apple ID engrained in it's DNA. It is an anti-piracy program. And when that personal Apple ID is used to setup a new Mac, it involves the Mac itself, the shipping OS and any pre-installed apps as well.
    It's not the correct way to handle Macs that belong to a business or an institution. And had it been handled correctly they would not now be in this predictument needing a drastic remedy.

  • I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    There is only one thing that happens -- the Server does not respond.
    Your mac concludes that you must have entered the wrong password. That may happen once, but then other issues become more likely, and it keeps asking for a new password.
    Sometimes the Server is down for maintenance. Sometimes something is configured wrong. Some services do this on purpose to get you to use WebMail (pick up your Mail with your Browser) so they can show you some ads.

  • Photoshop CS6 Extended 64 bit stopped working (asking for registration)

    Is there a solution for this yet?
    I registered this in 2012 and have been using it since on my Dell 64 bit laptop Windows 7.
    Now its asking for registration again.
    I don't want to use up another activation.
    What happened to Adobe support? Why is there no phone number to call?

    I already looked at what was available at the link.
    I entered the license again and this time it worked.
    Does this mean that I have used both of my installations?
    This PC is the only one it's been installed on. I should still have one more installation.

  • Why does Intel version always ask for my password when adding loops?

    When I add loops to the PPC version, it never asks for my password. I want this behavior on the Intel version. Always asking for my password’s really annoying. Thanks very much. Peace.

    Being able to to access, install and change anything on your computer with a simple keystroke is just not a good thing security wise. Maybe you don't download from unknown sources, use a wifi network, use public or work networks, IM, let others use your computer or let OS and software get out of date. But people reading this may not be in your situation. Most password hacking tools will start with single keystrokes and no password will gain access in a fraction of a second.

  • Homesite keeps asking for registration information

    I have been using Homesite 5.5 for several years.  I was using it successfully in Windows 7, 64 bit.  I recently upgraded my desktop to Windows 8, 64 bit, and when I went to use Homesite for the first time since the upgrade, it asked for my registration information, including serial number, as if it hadn't been registered.  After I entered it, it asked for the serial number of the program I had upgraded from, which I also entered.  It then brought up the registration screen again, followed by the previous serial number screen, etc.  After going through this three or four times, I was finally able to get into the program, but after I closed the program and tried to open it again, the same thing happened.  Even though I have Dreamweaver (and the entire CS 5 Design Premium suite), I prefer to use Homesite, and want to find out how to get it functional again.  I assume this is something to do with the registry, but have no idea how to fix it.  Any suggestions would be appreciated.

    Hey Folks, I think I have found a solution - even if I cannot prove if it can be reproduced on any other machine:
    After having the same Problem I tried several workarounds - and suddenly one crazy idea I had worked out:
    Run Homesite under "compatibility mode"***
    Enter registration information
    Homesite will run - but most of the menu bars won't appear. Don't mind: compatibility mode was only necessary once to remember the registration information...
    Close Homesite and switch back to normal mode
    Homesite will start and stop asking for registration info...
    This worked well on my Windows 8.1 Pro 64 Bit System - I hope, it works well with all your Systems too! Homesite is such a perfect simple editor and I'd badly miss it if it would not run on my system...
    *** For compatibility mode:
    Open the Homesite program folder in Explorer and look for Homesite.exe
    Right click on homesite.exe --> properties
    Select "compatibilty mode"*
    * I am using a German Windows and am not quite sure, if "compatibility mode" is the correct translation into English. If not, look for something similar...
    Good luck to all of you Homesite-Lovers!

  • How do I get rid of iMac always asking for login keychain

    How do I get rid of iMac always asking for login keychain, very annoying

    There is a utility called Keychain Access.  It is in your Applications/Utilities/ folder.  Keychain Access has tools to do "first aid" and a reset on your keychain.  Here are some Apple Support articles with instructions.
    http://support.apple.com/kb/PH7296
    and if that does not help (reset)
    http://support.apple.com/kb/TS1544

  • Everytime i need to add a song in my i phone,it always ask for earse and sync option,i need to avoid that a add songs manually.

    everytime i need to add a song in my i phone,it always ask for earse and sync option,i need to avoid that and add songs manually.

    https://support.apple.com/kb/ht1535

  • Finder always asks for password in Documents

    When I try to make a new document, to save something or to edit something in my \Documents folder, Finder always asks for a password.
    Saving in another program to the Documents folder isn't possible because the program can't write to the folder and just says ACCESS DENIED (Final Cut Express).
    I checked the permissions of the Documents folder and it says User (me) Read and write and everyone (No access). What should I do to make my Documents folder somewhat more accessable?

    mve87 wrote:
    Odd, but it worked. Thanks! The folder now behaves as it used to.
    But nothing changed in the Permissions, which I think is odd.
    Shouldn't Apple make a easier way to do this?
    ah, yes, that's a good point, oft discussed on this forum. the problem is that there are a lot of ACLs like those "everyone deny delete" ones that were preventing you from modifying items in Documents that are completely invisible from GUI. as a result you look at the permissions panel and think that everything is normal when in fact there may be a number of ACLs present. this is a terrible design decision by Apple. one can only hope it will be addressed in future versions of OS X.

  • My computer is always asking for passwords

    When I turn on my Mac it´s always asking for my iCloud and Keychain password. I don´t know what is happening, even if I introduce my password it will ask me again...

    Have you changed your password lately? If so, you should reset your keychain.
    Leo

  • I subscribed to Photoshop CC through the creative cloud but it keeps asking for registration

    I subscribed to Photoshop cc through the creative cloud which has been registered. Whenever I open Photoshop it asks for registration?

    Registering does no good and I had similar problems with the full Adobe package for a year and now it's still not working right with this photographers package. I've been watching for a fix for a long while now and nothing here ever helps. They assume you are not registered usually, but of course that's not the case. After all this time this problem remains for many people. After a while you just live with it and pray that you don't have an internet outage and miss a deadline.
    Pro software should not have a system this flawed.

  • One of AD RMS cluster servers always asks for credential

    I have created AD RMS cluster on Windows Server 2012 R2. 
    and I have configured NLB between the two servers but when users try to connect to second cluster server they cannot connect to it as it always ask for credentials. 
    I have put cluster name as trusted site on all clients. 
    Also I have noticed that AD RMS logging service doesn't exist any more on Windows Servers 2012 R2.
    a

    Hi Ahmed-Mahmoud,
    Please try to populate the IE local intranet sites with the appropriate URLs, credentials not automatically sent to RMS unless cluster/server names are in the IE Local Intranet
    sites.
    Active Directory RMS Stop entering user's credential when opening files
    https://social.technet.microsoft.com/Forums/en-US/2af38d78-bc2f-4882-ab4f-b155f08c30c1/active-directory-rms-stop-entering-users-credential-when-opening-files?forum=rms
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Recovery partition always ask for a WI-Wi-Fi  FI network, how to turn of?

    If I start from the recovery partition, it always asks for a network.  since we have our network almost never on (security) I wonder if you can turn this off or bypass.
    I know that if I start up the computer holding alt I can select the recovery volume, but wondered it there is a faster way.
    Thanks.

    mende1 wrote:
    If you press Command, Option (Alt) and R keys instead, you will start in Internet Recovery, which requires you to connect to a Wi-Fi network
    Really? I did it a couple of months ago and don't recall having to do it wirelessly, since I have no such network connection. About OS X Recovery states:
    In order to reinstall OS X Lion or OS X Mountain Lion, you will need to be connected to an Ethernet or Wi-Fi network.

  • Device always asking for apple password b4 downloading apps

    my device is always asking for apple store password even though I'm supposedly signed on. Is that normal?

    That is normal, because it doesn't want somebody that may have stolen your device to go using your money on apps you don't want.

  • I was using a different itune id and now a new one but when i want to update the old app its always asking for my old app id. Is there a way to change my old app to my new id so that i dont have to use my old id.

    I was using a different itune id and now a new one but when i want to update the old app its always asking for my old app id.
    Is there a way to change my old app to my new id so that i dont have to use my old id?

    There is no other way you can do now. Actually, you don't need to create a new Apple ID account, you can change the Apple ID from old email account to other email accout easily by all the steps below.
    1, Open iTunes > iTunes Store > log in old Apple ID > Click on your apple ID on the right hand side on top > choose account > Apple ID > Edit
    As long as you only change your Apple ID, then all the old apps are still under your new email account as well as you can keep downloading new apps.

Maybe you are looking for

  • Netmask Changes in Solaris 10

    Hi Team, We tried to change the netmask and broadcast address in solaris 10 by below steps ifconfig ipge0 down ifconfig ipge0 <ipaddress> netmask <subnet mask> broadcast <address ifconfig ipge0 up But interface is not up. The command (ifconfig ipge0

  • Anyone having a problem with iMovie in Mavericks v 10.9.3 ? when previewing the a slideshow the colors all disappear after the first image.

    Anyone having a problem with iDVD in Mavericks 10.9.3? When previewing a slideshow all color is lost after the first image.

  • Row Selection in ALV on Single click

    Hi Can we read the row in ALV on row selection ?  i set  gs_layout-sel_mode = 'D'. My Scenario is as under there is an ALV on the screen in which i have displayed the data . there is a push button on the screen. User will select the row and then clic

  • Ios8 email attachment disappearing

    ipad 3, ios8 just upgraded. email attachments are not opened, and disappear after first try. i receive emails with attachments (mostly pdf, pptx). the attachment are detected, and in the message list on the right i can see the paperclip marking them.

  • Select-option at Input

    Dear Experts, I have been trying to find to input the range of values,like we do in ABAP as select options,though i am able to use inputField but i want to select the range of values for a particular field... Pls help me out... Thanks, Saurabh