CS2 APPCRASH on Windows 7 (new problem)

Hello,
I have been using CS2 for a few months on a Dell XPS 8100 i7 [email protected] GHz with 8GM RAM on 64-bit system and Windows 7 Home Premium.
It has worked very well until today. I am creating a banner and everytime I insert a text box and start typing, it crashes with the following error:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 9.0.2.0
Application Timestamp: 44c6640f
Fault Module Name: AGM.dll
Fault Module Version: 4.15.20.1
Fault Module Timestamp: 4234968d
Execption Code: c0000005
Execption Offset: 000c0a5d
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 4105
Any help would be greatly appreciated. The program seems to work fine doing everything else except while typing in the text box.
Thank you very much.
Chase

Did you add any fonts recently? Update another Adobe app on the system? This is indeed the font engine crashing on a rather generic level, but since it's a shared component, the influence may be an external one...
Mylenium

Similar Messages

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.

Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version?

My itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario

New problem, Lycos Mail is my home page. When I open a new window I usually get Google search, which is what I want. Now, somehow when I open a new window I get Yahoo search. How do I change it back to Google? Thank you, Randy

New problem, Lycos Mail is my home page. When I open a new window I usually get Google search, which is what I want. Now, somehow when I open a new window I get Yahoo search. How do I change it back to Google?
Thank you,
Randy

A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can middle-click or hold down Ctrl and left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at this extension to set which page to open in a new tab:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/

Is CS2 compatible with windows 8

I have just purchaeed a new windows 8 PC and I'm having problems installing my CS2. Is CS2 compatible with windows 8. It won't let me intall into the programs (x86) folder. I have manually put a Adobe folder into the programs (x86) folder and installed directly into that folder but it won't take my serial number. Says the serial number is invalid

Not sure if it's 100% compatible, but basic functions seems to be working, no crash so far - tested on 64-bit Windows 8 Professional. Played just a few minutes, though - was curious if all that "free CS2!" is real, rather than really needed it . Installed it in "D:\Adobe", used software and serial numbers provided by Adobe at http://www.adobe.com/downloads/cs2_downloads/index.html.

New problem...SSD drive is no longer recognized

OK, I was having the memory issues so I went out and bought new memory that is supposed to be compatible (GSKILL 2x4 MB 1333 DDR3), and now I have a brand new problem. My SSD is no longer recognized, so I can't boot my OS. I've tried swapping ports, swapping cables, cleared CMOS...I even put the WINDOWS 7 Disc in to see if it would find the drive in the install screen, but it says no hard drive found.
Anybody know the issue I may be having now?

I had a similar issue, my BIOS wouldnt recognize my Intel X25 after a blue screen in AHCI mode.
In the BIOS I had to switch the controller type to Standard IDE. This made the drive visible again but to make it operable under AHCI, I had to use a Hex Editor from a DOS Boot Disk, and manually erase the first few sectors of the drive.
Then I could switch the controller back to AHCI in the BIOS and repartition/reinstall Windows - Until the next blue screen .
Obviously, doing this erases the MBR, allocation tables and partition table, and therefore makes ALL data on the drive inaccessible.

Is adobe photoshop cs2 compatable with windows 8?

Is adobe photoshop CS2 compatable with windows 8?

I have removed and re-installed CS2 twice now and still get the same library application error.
DO NOT INSTALL WINDOWS 8 ONTO YOUR COMPUTER IF YOU WANT TO KEEP CS2!
Telling us to spend more money to upgrade our software to meet OS does not show trust to the users. CS2 should be able to work with new OS systems and if not users should be allowed to update their current program for free to be able to use it on the new OS.
Thank you,
Eric

Unable to install Adobe CS2 Premium on Windows OS 7. How do I fix this ?

I am unable to install Adobe CS2 Premium on Windows OS 7. My discs require activation but do install to the OS. The non-activation version recommended gives the error message that" this version is not compatible wih OS" and will not install.
Thanks, Liz

Hi Issieoo,
Though you may install Cs2 on Windows but you may face performace issue. Please find the System Requirement for installing for one of the CS2 product: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop.html . However I would recommend you to purchase the new CC realease with more enhanced functionalities and features.
Regards,
Romit Sinha

Screen brightness windows 8.1 problem

Hi I have MSI GT683DX, after update windows 8 --> 8.1, scm have some new problems, now not only turbo button not working(Yes I know if I install older nvidia driver will work) but screen brightness and ECO button(power plan movie,office,game etc..) not working as well... Some help please I try some windows 8.1 fix (google) methods for brightness but without success so I think that is again SCM problem is not updated for windows 8.1 ... ?! THANKS

Installed older nvidia drivers again and wow again everything work well

Old Problem/New Problem: Lightroom can't find file, then finds, but won't edit it.

(Lightroom 2; Macintosh G5; OS X (10.4.11))
First, the old problem which, though unresolved, is here mostly for background:
A little over a month ago, I posted a question (at http://forums.adobe.com/thread/480423?tstart=0 ).
The short version of that problem is that certain previously accessible images were not able to be opened in Lighroom. The preview image appeared in the main window accompanied by this message across the top of it:
"The file named "[name of image/file]" is offline or missing."
When I right clicked on the image and selected "Show in finder" I got this message:
"The photo '[name of file]' could not be used because the original file could not be found. Would you like to locate it?"
Below which was shown the original path to the file. In the middle of that path, one or more folders appeared with colons in their names in place of the slashes originally part of the names (some folders have dates in their names). Following the path via the Finder, the file was exactly where it was supposed to be, although, of course, slashes appeared instead of the colons that were in the Lightroom summary of the original path, but Lightroom couldn't find them.
I was convinced that Lightroom was renaming the folders (but only in its interface; the original folders had correct names in the finder -- which is the only way they could have been named, since colons are illegal characters and won't be accepted as part of a file name). But I see now that there is some weird thing going on in the Finder itself. Even though I see the correct name on a folder when I search for it, or navigate through the hierarchy, if I click on the file at the end of that hierarchy (the file that Lightroom said it couldn't find) and ask for file info (via Command - I, or other method), the path to that file shows colons where slashes should be, but only in the names of the folders that were so named in Lightroom. All other folders with slashes in their names are listed correctly. So it's a Finder problem. Though this is still a mystery, I have been able to work around the problem. But how is this happening? (Note that I will be reformulating the question and posting it on the Apple discussion groups soon; I don't expect this forum to deal with Apple system issues. Just thought that others here may have had the same problem.)
Now, the new problem, possibly related to the old one:
In the same collection where I noted the previous problem, I selected an image that I wanted to print. The preview came up with this message:
"The file could not be found."
But when I right click on the image and select "Show in finder" it opens the correct Finder window with the file in question highlighted. The file, a TIFF, opens normally in Preview or Photoshop.
So why does Lightroom think it's not there? (even though it can show me exactly where it is)
I have edited this photo in Lightroom before. I have printed it from Lightroom before (as shown in the Lightroom history). But today it can't be edited, won't print and "could not be found"!!!
I know I can print from Photoshop, or re-import this photo into Lightroom (along with any others that Lightroom "can't find"), though both would require time and re-editing the original. I would rather understand (if that's possible) why this is happening in the first place, so hopefully I can avoid such wackiness in the future.
I realize that may have to burn some sage and hire a Shaman, but any ideas that won't smoke up the house or scare the cats would be most welcome.
Thanks for reading.
Leonard B.

If you have an old goat around that's not doing so well, consider the sacrifice.
The one thing that occurs to me besides the Gremlin, is the use of colons or slashes or some other character that the OS or LR doesn't like in some file name or other. I think you'd have to change same in Finder, then show LR where the images are.

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name. I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name. I have also deleted the account entirely from my address book. I have have run repair permissions and also full defrag in iDefrag. Still the problem persists. Any suggestions?

Hello CarolineLongEaton,
I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
https://discussions.apple.com/thread/6116927
If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
dofromon

Cannot open links/hyperlinks in my Ipad Air email. This is a new problem! How do I fix back to norm as it was new?

Just recently I tried to click on a link in my email on my Ipad Air, click on menu headings did not respond? This is a new problem! Stores send me emails on sales with menu headings to access "Clearances", "Men's Wares", etc. I click on them to see the offerings BUT THEY DO NOT RESPOND? Is there a setting turned on or off that prevents me accessing these email links? Appreciate help...Thanks, VFP

Hi Steeloid
click on the Firefox button (or Tools menu) > Options > General panel > Startup > Show my windows and tabs from last time .
see for more info : https://support.mozilla.org/en-US/kb/startup-home-page-download-settings#w_startup
see also: [https://support.mozilla.org/en-US/kb/restore-previous-session Restore previous session - Configure when Firefox shows your most recent tabs and windows]
thank you

Windows file permissions problems

We have an Xserve G5 that was running Server 10.3. I upgraded it directly to Server 10.5. Since then, I am having problems with some of our Windows users.
When they create a new folder, it puts them as the owner, but gives them NO rights. I am using ACLs to give full rights to the group that needs access, and also setting the POSIX group rights to read/write. So once they leave that folder, they can no longer get back in. I have SMB set to inherit rights from the parent, and the ACL is set to inherit as well. Other people in the group can access the folder, just not the owner! I change the owner permissions and all is well (for that folder at least). How do I need to set SMB so it follows the inheritance I set?
Once I have the folder set correctly, any new files created there have the POSIX group set to read only. The ACL inherits properly and still has full control. The owner is set correctly, usually. It is not consistent.
Once someone creates a file in any folder, if a Windows user modifies a file someone else created, it changes the owner name and gives them no rights. It also creates a new ACL record. If the original owner was a Mac user, it creates a new explicit ACL with all rights except execute and delete. If the file has ACL records already, it duplicates them and gives whatever rights it feels like (it seems). One new record may say Allow Delete only, and the next one say Allow Read except for execute. The only thing for certain is it will never match the original ACL. It always adds the new ACLs at the top of the list, and the duplicates are grayed out as if they were actually inherited that way. The most 'popular' file I've found so far had 128 "inherited" ACL records!
It is also denying access to some folders that the user has the correct permissions for. For instance, I can create/modify/delete files logged in on the Mac side, but when I log in on Windows, I have problems accessing files/folders. It shows everything as read only. Even if I change the properties in Windows, it will revert back to read-only when I apply the change.
We have a new Xserve that we will be moving the file services to. At that time, all the Windows users will be moved completely to the Mac side - currently the Windows users are accessing the Xserve and a Novell server.
Thanks in advance for any help.

Hi Thy,
Based on my research, the Trusted Installer is a service, for those resources which only allow Trusted Installer to modify, neither Administrator nor System can modify them.
I am wondering that how secure the network and physical environment is that you need to create a GPO to prevent users making permissions changes on system files. These system files normally only can be modified by Administrators,
System or Trusted Installer, which is secure enough when we don’t add users we don’t trust enough to Administrators group.
>What is the best way to undo this while leaving the audit failures turned on and still retaining the correct permissions on all the files?
As long as administrators on these machines are qualified, you can remove the Group Policy. If not, please don’t make any user you don’t trust as Administrator.
>What happens to the files that aren't owned trustedinstalled than now have the trustedinstaller default permissions under system32 and syswow64 if I were to remove the gpo? What file permissions would be retained?
We should keep the default permissions, if those files weren’t owned by Trusted Installer before, we should change the original owner back, vice versa.
Here are some related articles below I suggest you refer to:
New ACLs Improve Security in Windows Vista
http://technet.microsoft.com/en-us/magazine/2007.06.acl.aspx
SYSK 277: How-To Bring Back the TrustedInstaller
http://blogs.msdn.com/b/irenak/archive/2007/01/30/sysk-277-how-to-bring-back-the-trustedinstaller.aspx
Best Regards,
Amy

For some reason if I click a link that needs to open in a new window, the new window is blank. This just started happening when firefox updated itself last time

Ever since firefox automatically updated itself, I am not able to open websites in new windows - meaning that if I am on a website and you click a link on it that opens in a new window, that new window is blank. It used to work perfectly. I even checked my foxit reader and that it working well

Hello Angelika.
I should bring your attention to the fact that your user agent says you're using Firefox 3.6, not 3.0. I will remind you that Firefox 3.0 has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems.
As for your problem, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

New problem of photos looking "splotchy" in imovie but not in iphoto?

I've made a bunch of home movies in imovie 08 but on my most recent one I have a new problem.
I noticed a number of photos have what I call a "splotchy" or "granular" look to them. Yet, when I view the same photos in iphoto, they look fine. I notice most of the "splotch" takes place in darker colors, especially blues and such. For example, I was in a photo wearing a navy blue shirt. The stomach to the arm of the shirt looked like I had an enormous sweat stain even though nothing was there in reality. The picture looks fine in iphoto.
On my camera, I did make one change. I maxed out the pixel count to the highest that my picture allows rather than the one below it. I think the compression is set to the maximum allowed. Not sure if this would impact it.
When I expert, I use expert settings to go to quicktime.
Any thoughts as I'd like to avoid this in the future and possibly convert this movie again to avoid the splotches, if possible.
Thanks.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

CS2 APPCRASH on Windows 7 (new problem)

Similar Messages

Maybe you are looking for