CS2 - Canon iP5200R, A5 printing problem

Hi, I have an A5 document I would like to print to A5 card. I cannot get it to print how it looks on the screen though, it always prints at the top right hand side of the sheet, with only the bottom and left hand side parts of the image being printed. Does anyone know why this is? Not sure which information you would need to help me but ask and I'll let you know.
It's for Wedding cards, so need to be done pretty quickly :/ Thanks in advance,
Keith

Keith
>Not sure which information you would need to help me but ask and I'll let you know.
For the future, you should review this topic:
How To Get Help Quickly. It's right at the top of the main Photoshop/Mac page.
Please post pertinent info about your computer, OS, and in your case, most important, your printer. Offhand, it appears to be a printer setup or preferences setting (size or position).
It would be helpful to us if you could take screenshots of all of your page setup and print settings and link to them on your server, or use the free pixentral.com
Neil

Similar Messages

Canon ip5200r wireless printing problems with Airport Extreme

I have been been printing from my iBook G4 (OS 10.3.9) using my Canon ip5200r connected to my wireless network for a couple of months without any problems. Yesterday it stopped working. When I called Canon for support, they say the problem is that my Airport Extreme is assigning different IP addresses to my computer and printer despite both being on the same network. I am not sure if it is relevant but the only recent change in my system is that earlier this week, I had a new high-speed internet modem installed. Can anyone help with this?
Thanks!

Attached to the airport USB port I have
an unpowered hub with both a 500G disc and an HP deskjet 940c printer.
Why is that? power power power try it see what happens.

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

Canon ip5200r wifi printing not working

I have an old ip5200r canon printer.
It's been a pain over the years - each time i update my operating system i have had to update the drivers and fiddle around to get it to connect to my mac via wifi. USB printing is fine and always works.
With 10.10 however I am totally stumped. I have managed to connect the printer to the network, and the printers and scanners system preferences can see the printer and it tells me it is installed, but I am unable to print.
My partner often uses the printer and constantly complains about walking around the house and plugging a USB cable in. It should be so easy, I am unsure why canon make it so hard.
I was wondering if anyone could offer any possible insight or recommendation?

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

Canon MF 4412 printer problem fixed

I got a problem on MF4412, the canon 4412 is connected the newest airport extreme , it get configured. But I got same problem described about on my leopard, lion, even worst on iOS, it does not find the printer. But I got a Windows 7 starter NetBook ...haha it works, I can print it from Windows. what is the problem then,it works on Windows but not Apple's OS??????
So it works on windows,it is really fixed. Anyone from Canon or Apple could help fixing the problem on Apple's OS?????? help

Canon has the MF ScanGear v1.30 for Mac OS X. With this software installed you can then set the MF Scan button online (showing USB Scanner or something similar) and then use either the MF Toolbox application (included with the driver) to scan or use Preview to scan your document.

Canon MX870 duplex printing problem

I usually have letterhead paper in my printer tray. And everything used to work fine: if I were printing single-sided or duplex, the printer always printed the first page properly, on the side with the letterhead.
But ever since I upgraded to Mavericks, it will print single-sided on one side, and page one of duplex printing on the other.
If I load the paper face up, duplex printing puts page one properly on the letterhead side. But if keep the paper face up and print single-sided, it will print page one on the back of the page.
Anyone else experiencing this? Anyone have any dieas how I can fix this?
Thanks in advance.

Hello Roger,
I just tested your symptom on a Canon MG6150 and it appears to be working fine for me.
I loaded a letterhead sheet face-up into the printers cassette. I then selected to print a single page from TextEdit. The text printed on the correct side.
I then created a second page in TextEdit document and selected to print. From the print dialog I enabled the duplex setting in the Duplex Print & Margin menu of the Canon driver. With the letterhead sheet loaded as face-up, page 2 printed on the blank reverse side first, and then paper was pulled back into the printer and page 1 was printed on the letterhead side.
So can you reply with what application you are having the issue with.
Can you also reply what driver version you are using. I am using v10.89.1.0 which was a recent update. You can check this by opening Printers & Scanners, selecting the MX870 and clicking on Options & Supplies. The General tab will show the version.

Canon MF4370 network printing problem version 10.7.1

Here are some relevant setup and diagnostic details:
* Mac OS X 10.7.1
* Firewall is turned off
* Canon UFR II v2.27 driver
* Added printer via Bonjour
* Able to print from desktop PC via Ethernet cable and from laptop PC via WiFi
* UFRII print monitor gives error "Cannot monitor this printer with the current connection."
* Unable to print from MacBook Air connected via Time Capsule WiFi. Print command returns 10322 error "Cannot communicate with the printer" and UFRII print monitor gives error "Printer not responding."
What can I do?
This is the first time I am using a Mac, please be detailed (like speaking to a 6 year old) if you do have suggestions.
Thanks in advance.

Hello and welcome to Apple Discussions.
First of all I would like to complement you on the work you have done so far. Under most situations I would have expected you to resolve your issue with all that you have done.
The clue for getting this to work is the UFR2 Printmonitor. Once it can communicate with the MF then the driver will function.
From your information I believe that the UFR2 Printmonitor could be still looking for the previous setup when the MF was connected via the AT&T router. When you manually delete the UFR2 driver including "UFR2.BG.plist" this does not work correctly when the service is still running. You will see the 'UFR II Backgrounder' service via Activity Monitor.
So I suggest that you open the UFRII Printmonitor and then click on the Printer menu. You may see the MF4370dn with a USB icon next to it from the previous USB connection. And it should also show the MF4370dn with a network icon next to it. What you want to do is update this network 'link' to the current network connection and that can be done by pressing 'Search for Printer'. Nothing will be visible on the display when this completes so leave it a couple of seconds and then open the UFRII Printmonitor > Printer menu again. If you now select the MF4370dn entry shown with a network icon this should now show a connection to the printer rather than a not responding error. If this does work then you can exit Printmonitor and try printing.
If it still fails to print then delete the MF printer queue and manually remove the UFR2 driver files again, this time adding the extra step of Force Quitting the UFRII Backgrounder service via Activity Monitor. Then restart the Mac and run the v2.20 UFR2 installer again and then add the printer via LPD.
See how that goes and reply if needed.

Sudden problem getting CD-LabelPrint to work with Canon ip5200R

The last time I successfully printed a disc label on my Canon ip5200R was in November last year - until then, I'd had no problems printing from a couple of different iMacs & my MacBook Air. I have recently tried to print a new label, but am receiving the message: "The Paper Settings are not correct. Please check the paper size, magnification ratio, and the paper orientation. To set the paper settings, please click on "Settings". To cancel printing, please click "Cancel"." All of my settings are correct! I used to get a message that advised me to check the "Quality & Media" settings, where I could make further adjustments (eg, tick "greyscale printing"), but I can no longer access this option.
A Google search revealed that others have had similar problems - solutions suggested included updating the software. I was using CD LabelPrint v.1.3. I have installed v.1.7, but the problem persists. (When I installed v.1.8, the message indicated that there was no printer installed that would work with the program!) (I uninstalled the previous versions correctly by deleting the folder from Applications as well as from Preferences in the Library.) I have attempted to print from 4 different Macs - three of them are running Mac OS 10.5.8 and one is running 10.4.11- no luck with any of them! The only change that is consistent between them since November last year is that they have all received software updates for their operating systems. I am wondering whether something in these updates is now interfering with CD LabelPrint?
I am frustrated with the amount of time this has taken so far, and so am hoping that someone will please be able to help me rectify the problem.
- Merrilly

Hi there,
I have v1.60 of CD LabelPrint on my 10.5.8 VM and it is working fine. It also has all the Apple updates installed so I don't think this would be the cause.
I also have v1.80 on 10.6 and it is working fine as well.
The version 1.60 on 10.5.8 generates a pop-up as soon as the Print icon is pressed. This takes you to the Page Setup menu for CD LabelPrint to ensure you have the 'Format for' set to the iP5200R and the 'Paper Size' set to 'CD Tray C'. With these selected and the OK button pressed, the next warning window appears regarding the Quality & Media settings.
If you manually open Page Setup in your CD LabelPrint, does it have the iP5200R set as the printer and the CD Tray C set for the paper size?
Regarding the v1.8 and the error, this version was released to add support for Snow Leopard. Since you have to use the CUPS v10.26 driver on Snow Leopard (the v4.8.3 driver for Leopard cannot be used on SL) then maybe the same driver would have to be installed on Leopard in order for CD LabelPrint to function?
Pahu

Borderless printing problems - Aperture 2.1/Canon Pro9000 II

Problem: photos don't print borderless. I have selected the appropriate paper from the "paper size" dialog (in my case, "4x6 borderless"). Things used to behave nicely but something has changed after Snow Leopard. The "calibrate" settings do not solve the problem. The border appears only on two edges of the print and the calibrate settings can't move it back. Other software (Preview, Photoshop, etc.) print borderless without issue. Anyone else out there having a similar issue?
Aperture 2.1.4
OS 10.6.1
Canon Pro9000 II, CUPS driver 10.26.0.0
Thanks in advance for any ideas!

I also have struggled with the borderless printing problem. Tried calibration has some unpredictable results. Tried preview, pretty much the same problem. Spent much time, ink and paper to come up with a solution I can live with. I accidentally printed a borderless 4x6 that actually had a 1/8 inch white border all the way around, not the borderless print i had intended but one that i can live with until there is a SL fix or a Aperture fix... I am just waiting. This is just one of many print problems since installing SL.
Canon IP5200r printer... I have installed the latest drivers

6x4 printing not borderless via Canon ip5200R

Help
I am trying to print 6x4 prints from iPhoto 5 to my new Canon ip5200r printer.
I have selected the borderless option and the correct paper but the preview and actual preint still as half an inch either side in landscape of white. The photo also look a little smaller. Checked settings but cannot find why it is doing this.
If I use the Canon program it prints borderless perfect prints.
By the way, the Canon ip5200r is fantastic. Brilliant results and it is also wireless.

Hi Paul,
I've just bought this printer (I thought it was going to by white to match my imac, never mind) and after setting it up, the first thing I tried was 4x6 from iphoto.
I had the same problem, then I tried cropping the photo first and reprinting it. Now I only get a white bar to one side. Not what I want or you want but it's a step closer. I guess playing around with the settings should do it, if I sort it out I post a message.
If you sort it out please let me know, I don't want to wast too much paper!
Russell

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Pdf printing problem Mac OSX Snow Leopard Canon MP620 Pixma printer

After upgrading Adobe Reader version 9.3 to version 10 I cannot print pdf documents using Canon MP620 Pixma printer. Mac OSX Snow Leopard operating system. All other prining works OK. Never had problem before Error message "pstopdffilter/ pstocupsraster failed with err no. 13" comes up. What has happened and how do I put it right?

See this link for a solution:
http://forums.adobe.com/message/3476912#3476912

New Canon Pixma MG2220 printer - install problems on Windows XP

I bought a new Pixma MG2220 printer and received it 2 days ago. I followed the instructions and installed it from the provided CD on my 10 year old Compaq S4020WM desktop computer upgraded with 1GB RAM and 1TB hard drive running Windows XP SP3.
The CD installation took a very long time to complete (maybe an hour or so) and things did not work right. In particular the My Image Garden software was very slow and sluggish to respond. So I downloaded and installed the latest drivers and software from the Canon website on top of the existing installation, which did not help. The My Image Garden software began crashing completely with an error message about a bad .dll file. After talking to Canon tech support on the telephone, the support tech admitted that this software CD was probably not compatible with my old XP computer. The My Image Garden software uses like 500MB RAM which is too much resources for my machine. So the rep had me uninstall My Image Garden.
At that point I decided to uninstall everything and start over from scratch because something was obviously not right. For example, the Canon MP drivers were using 755 MB RAM, which seemed much too large. Obviously things had not installed properly from the setup CD, in general. The date on the setup CD was 2011, so apparently it was 2 years old, and long out of date!?
So I uninstalled everything except the Canon registration and onscreen user manual. I also kept Windows Adobe RGB 1998 because I didn't see any way to uninstall it. I also uninstalled .NET 4 which the setup CD had said was necessary, as well as Microsoft XPS EP which My Image Garden had also told me was needed. Then I cleaned up my computer as well as possible with help of Revouninstaller and Ccleaner, which was necessary because things were very messy with many uninstalled remnants and incorrect registry entries. I feel lucky to have survived those tasks without having to reinstall my op system. It wasn't easy.
Then I installed the following 2 modules (only) downloaded from the Canon website:
MG2200 series MP Drivers Ver. 1.01 (Windows 8/8...        01/31/13    14.07 MB
File Name: mp68-win-mg2200-1_01-ejs.exe
This file is a driver for Canon IJ multifunction printers. You can install the following items of the software: MP Drivers: The driver for Canon IJ multifunction printer. IJ Scan Utility: The software that allows you to easily scan photos, documents, etc.
*My Printer Ver. 3.1.0 (Windows 8/8 x64/7/7 x64/...        01/07/13    5.12 MB
File Name: mypr-win-3_1_0-ea11_2.exe
This file allows you to easily change the settings such as the paper source settings and provides you with information on how to solve problems such as ink smudging.
I believe that's everything required to access all of the print, copy, and scan operations of this MG2220 printer. Based on my current understanding, I would classify everything else as optional. I use free Irfanview for editing and manipulation of images, which seems a satisfactory substitute for the other software.
I did not reinstall .NET 4 or Microsoft XPS EP, because apparently they're only required if you install the My Image Garden and/or Quick Menu modules. I also did not reinstall the Easy-WebPrint EX module which apparently only applies to printing with the Internet Explorer browser, while I primarily use Firefox, Chrome, or Opera browsers. And of course I did not reinstall My Image Garden nor the Quick Menu, which were so problematical originally.
On the bright side, the Canon MP drivers appeared to install correctly this time, using only 35 MB RAM (vs 755 MB previously). Also the Canon IJ Scan utility was reinstalled automatically as a part of that driver installation process. Those items have their own shortcuts. I found it useful to make one additional shortcut via Start > Settings > Printers and Faxes > "Canon MG2220 series printer", to allow easy access to all of the internal printer settings and variables. Like I said, I believe this is all that's required, in addition to some image manipulation software such as Irfanview. I deal mostly with documents and never print photos nor use cameras. Those who have large photo collections and/or cameras may need something like My Image Garden or Easy-PhotoPrint EX.
I previously used Lexmark printers for the prior 10+ years, where everything is controlled by software from the computer. I never had to use the buttons on the printer. That's obviously different with this Canon printer, which will take some getting used to.
I'm disappointed that there's apparently no way to enlarge or reduce the % copy size with this model. Is there? I also don't find any setting for lighter/darker when making copies. Is there? There are apparently no other enhancements or filters available when copying. Are there? Similarly, scanning seems remarkably unversatile with this model and I can't find any way to set a scan for ligher/darker or apply various enhancements/filters. Are there?
The printing seems OK, but I must still decide whether the very limited copy and scan options will be sufficient to my needs. I'm not sure yet. I might take it back for a refund and get something better, if I knew what was better. That's another research project. Suggestions?
Thanks for any feedback.

Thanks for your info but the MG5420 is more than twice the cost at my local Walmart and Staples stores.
I thought I was being smart to buy the MG2220 as a later model(?), but it looks like the prior model MG2120 has more copier and scanner features according to the online specs at the Canon website (see copies below).
For example the MG2120 allows 25%-400% reduction/enlargement when copying, while the MG2220 does not. Can you verify this?
Also does the MG2120 allow for setting copying to lighter/darker? (I don't understand that complicated technical lingo in the specs.)
Thanks.
Pixma MG2120
Copier
Copy Speed (up to)   FCOT(Color) Approx. 30 seconds8
Reduction / Enlargement   25% - 400%
Copy Features   4-in-1 / 2-in-1, Auto Exposure/Intensity Copy, Face Brightener/Fading Correction, Fit-to-Page, Gutter Shadow Correction Copy, Image Repeat, Intensity, Multiple Copy: 1-9, 20 Pages, Photo Reprint, Preset Copy Ratios, Zoom
Scanner
Scanner Type   Flatbed
Scanning Element   Contact Image Sensor (CIS)
Max. Resolutions   Optical:1200 x 2400 dpi
Interpolated:19,200 x 19,200 dpi
Scanner Features   Auto Document Fix, Auto Scan Mode5, Gutter Shadow Correction, Push Scan
Color Depth   48-bit internal/24-bit external
Max. Document Size   8.5" x 11.7"
Pixma MG2220
Copier
Copy Speed (up to)   FCOT(Color) Approx. 30 seconds3
Copy Features   Borderless Copy, Fit-to-Page, Multiple Copy: 1-9, 20 Pages
Scanner
Scanner Type   Flatbed
Scanning Element   Contact Image Sensor (CIS)
Max. Resolutions   Optical:1200 x 2400 dpi
Interpolated:19,200 x 19,200 dpi
Scanner Features   Auto Scan Mode, Push Scan
Color Depth   48-bit internal/24-bit external
Max. Document Size   8.5" x 11.7"

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Adobe Photoshop CS6 and Canon printer problem!!

Use Photoshop CS6 to edit and print (try to print) to a new Canon Pixma Pro-100 printer. Photoshop is up to date and the Mac runs OS 10.8.5 - Canon printer driver is current at ver. 11.7.1.
When I print from Photoshop to the Pro-100 (let's say a 4X6 landscape snapshot to 4X6 borderless paper) the printer starts up and moves the paper out about 4 inches and then prints the
first two inches of the image, stops and ejects the paper!. I've tried different versions of printer the printer driver and made sure every things is up to date. However, I can print from MS Word,
Nikon Capture NX2, or Canon's own Print Studio Pro and it works fine. Canon is no help because if it works OK with their Print Studio Pro then it's not their issue - I tend to agree with them.
The same thing happens print from Photoshop to 5X7 or 8X10 paper - it gets ejected so far and then only prints part of the image. I've searched the Internet and posted in Forums but can't find
where any one would have the same problem. What I'm hoping for here is someone at from Adobe who's knows Photoshop tech stuff will post here with suggestion because there is no more
phone support for Photoshop CS6. I'd like to really keep this printer and get Photoshop to work with it but if I can't I'm going to offer it up free to a good home! JM Davis

Thanks for your answer, indeed this fixed the problem. Quite stupid I did not see this myself

CS2 - Canon iP5200R, A5 printing problem

Similar Messages

Maybe you are looking for