CS2 deactivation on other computers

I want to install and activate my old version of CS2 on my pc that is running on windows 8.1. I have no idea how many times I have activated this program or on how many computers. Is there a way to deactivate all but one?

The activation servers for CS2 have been shut down. You can download a new
installer but be aware that the chances of a successful install of CS2 on
Windows 8 is not good at all.
Links are in this article:
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activati
on-end-life.html

Similar Messages

Tabs from deactivated device still show up in "Tabs from other computers"

After deactivating a device, its tabs still show up under "Tabs from other computers". How do I delete the data left over from that device?
More importantly, if I now choose to sync Preferences, will Preferences from the deactivated device be imported (which I wish to avoid)?

This is Bug 582662, which we should be implementing some time in the next few months.
https://bugzilla.mozilla.org/show_bug.cgi?id=582662
The records themselves should eventually disappear as they expire on the server, or you can forcibly remove them by using Reset Sync (replacing other devices) on the client whose you want to keep. There are less drastic solutions, but they require prodding at the internals of Sync through the Web Console.
If you turn on Preferences syncing, the prefs on your local device will be merged with prefs that were synced to your sync account. The only way that will include prefs from the deactivated device is if you first synced prefs from that device.

I deactivated my 5 computers to add other ones. And now my iPhone says id deactivated. How go I re activate it.

I deactivated my 5 computers to add other ones. And now my iPhone says id deactivated. How go I re activate it.

Welcome to the Apple Community.
Do you recall the steps you took to de-activate your computers.

Cannot Connect to other computers on my router

I have a u.s.robotics sureconnect 9106 (adsl modem and router - the same as
9105) and wanted to hang another pc with xp pro to my xp pro machine. So
i connect the two via ethernet cable to the router, but i am able
to ping the other machine and to use ftp but neither of the two can see
the other in windows xp pro
the same with a osx machine witch i connect for checking itunes or sharefolders
I also try my xbox with xbmc for sharing and streaming my itunes songs
but it doesn't work at all, even after i open the two ports asked by
itunes - i also deactivated outpost but that neither helped - the
strange thing is that in the outpost/system/lan-settings outpost can't
even see the other machine
I can also ping it and ftp, but nothing more
when i try to connect then outpost ask me if i want to allow it and
afterwards when i try to close itunes then it says that another user
is in my library but the xbmc says that it couldn't connect...
what have i forgotten?
I not read here that the port 5353 should be udp and i have only give the tcp port free but after changing to udp itunes not even told me on the exit that another user has access to my database
ah well i have on my router a virtual server with the same ip as my
computer (192.168.1 ist the modem 2 ist my computer and the virtual
server and 3 is the other computer) and there i set the port holes for
the nat service (itunes etc) BUT i think because of that i have
in the network connections not even a internet-gateway but only
the ethernet connection
I installed xp pro new, but then the gateway only appears for some
seconds and then disappear. But lately for a while it appears but after
some time it disappears - maybe its because i try this time not to give
my machine a fix ip and then its possible that the gateway appears when
I have another ip than the virtual server on my router, and that then
outpost also recognize the other computer?
any idea what i did wrong, or i have forgotten, i really haven't a clue
what to to and i never haven't heard that when you have a virtual
server (nat) then its not possible not to connect to others
computers...
thanks for your patience
adrian

Bought my iMac in February and worked fine up until about a month ago. I have assigned a manual IP address outside the range of other devices in my network (e.g. 192.168.0.10) and this seems to do the trick (most of the time). The problem I had was the self assigned IP address wasn't in the usual range for my router so while I was connected to Airport and the internet I couldn't view any webpages. Had to do the same thing to my Macbook which I purchased about a month ago.
The strange and very frustrating thing is sometimes it doesn't recognise my preferred network but then when it asks me to join a network, my network appears! When I try to connect and confirm password, connection times out. Whats that all about?
The bottom line is the assigned IP solution doesn't always work but it seems a combination of issues rather than one. None of the other devices on my network (ReadyNas Duo, Xbox 360, PS3, Wii etc) have issue connecting to the router using DHCP but for some reason Airport has trouble dealing with this and assigning a correct IP or can't find the network all together.
Only thing I can think is its some Airport update that has caused these intermittent issues and realy hope they fix it soon.
So no update but just wanted to share my experiences in what seems a very wide scale issue...

HT1420 I have deactivated all 5 computers and I still can't sync my iphone

I have deactivated all 5 computers connected and I still can't sync my iphone

Synching is pretty old for today's Cloud era. What exactly are you needing to do this far?

LAN-"shared to other computers"...not connecting {SOLVED}

Hi,
I just downloaded the latest Arch 64-bit the other day and thanks to the excellent wikis I have been able to get KDe up and running and change to network manager for my mobile broadband internet.
The only main thing I have a problem with now is connecting to my (VU+ duo) satellite box over LAN with a cat 5 in order to stream my TV service. This has nothing to do with the internet.
The only thing I had to do in other distors in network manager was set up a new wired connection and , in IPV4, change to "shared to other computers" and it would connect straight away. The satellite box has a static IP address saved into it
when I try now, I get a message "The shared service failed to start"
ip link:
2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
There is no file /var/log/messages to check.
These are the last few lines in dmesg after I tried to connect
[ 8.127846] r8169 0000:03:00.0 enp3s0: link down
[ 8.127861] r8169 0000:03:00.0 enp3s0: link down
[ 8.127872] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 9.734164] r8169 0000:03:00.0 enp3s0: link up
[ 9.734176] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 1385.154487] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1385.167013] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
from lspci:
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
any ideas?
EDIT: from lspci -v
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Dell Device 02e0
Flags: bus master, fast devsel, latency 0, IRQ 45
I/O ports at ce00 [size=256]
Memory at fddff000 (64-bit, prefetchable) [size=4K]
Memory at fdde0000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at fdd00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
[nemesis@archlinux ~]$ dmesg | grep r8169
[ 5.251914] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.251930] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.252154] r8169 0000:03:00.0: irq 45 for MSI/MSI-X
[ 5.252330] r8169 0000:03:00.0 eth0: RTL8102e at 0xffffc900122de000, 00:25:64:e9:56:55, XID 04a00000 IRQ 45
[ 8.127846] r8169 0000:03:00.0 enp3s0: link down
[ 8.127861] r8169 0000:03:00.0 enp3s0: link down
[ 9.734164] r8169 0000:03:00.0 enp3s0: link up
Last edited by Human_19 (2014-01-08 20:37:48)

the address in the tv box is static 10.42.0.65, gateway 10.42.0.1. I never have to enter this info into nm, only in the browser after connection is established
I fired up a live cd of manjaro earlier and was able to connect to the shared link straight away, as usual.
3 lines from that log:
Jan 4 13:45:07 localhost NetworkManager[303]: <info> Starting dnsmasq...
Jan 4 13:45:07 localhost NetworkManager[303]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 4 13:45:07 localhost NetworkManager[303]: <info> Activation (eth0) successful, device activated.
The result from Arch today:
s]# journalctl _SYSTEMD_UNIT=NetworkManager.service + _SYSTEMD_UNIT=dnsmasq.service --since 2014-01-04 ^C
is below, at the bottom of the post. I didnt include modem manager as Iam not looking for an internet connection
I am guessing the most important lines are:
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Activation (enp3s0) successful, device activated.
Jan 04 18:25:43 archlinux NetworkManager[224]: <warn> dnsmasq exited with error: Network access problem (address in use; permissions; etc) (2)
after googling, I found dnsmasq exitcodes
2 - A problem with network access occurred (address in use, attempt to use privileged ports without permission).
Could it be that I just need to add my user to a particular group to access http over the LAN? I cant find out how to determine which groupd I am in already. I added a load of groups already .
on Arch from my latest attempt:
-- Reboot --
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> NetworkManager (version 0.9.8.8) is starting...
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> WEXT support is enabled
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkMa
Jan 04 18:23:58 archlinux NetworkManager[224]: keyfile: parsing vu+ ...
Jan 04 18:23:58 archlinux NetworkManager[224]: keyfile: read connection 'vu+'
Jan 04 18:23:58 archlinux NetworkManager[224]: keyfile: parsing O2 ...
Jan 04 18:23:58 archlinux NetworkManager[224]: keyfile: read connection 'O2'
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> monitoring kernel firmware directory '/lib/firmware'.
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> WiFi enabled by radio killswitch; enabled by state file
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> WWAN enabled by radio killswitch; enabled by state file
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> WiMAX enabled by radio killswitch; enabled by state file
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> Networking is enabled by state file
Jan 04 18:23:58 archlinux NetworkManager[224]: <warn> failed to allocate link cache: (-26) Protocol mismatch
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> (enp3s0): carrier is ON
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> (enp3s0): new Ethernet device (driver: 'r8169' ifindex: 2)
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> (enp3s0): exported as /org/freedesktop/NetworkManager/Devices/0
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> (enp3s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> (enp3s0): preparing device.
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> (enp3s0): deactivating device (reason 'managed') [2]
Jan 04 18:23:58 archlinux NetworkManager[224]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
Jan 04 18:23:58 archlinux NetworkManager[224]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> (enp3s0): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
Jan 04 18:23:58 archlinux NetworkManager[224]: <warn> Couldn't get managed objects: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name
Jan 04 18:23:58 archlinux NetworkManager[224]: <info> ModemManager disappeared from bus
Jan 04 18:23:59 archlinux NetworkManager[224]: <info> ModemManager available in the bus
Jan 04 18:23:59 archlinux dnsmasq[407]: started, version 2.68 cachesize 150
Jan 04 18:23:59 archlinux dnsmasq[407]: compile time options: IPv6 GNU-getopt DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset auth
Jan 04 18:23:59 archlinux dnsmasq[407]: DBus support enabled: connected to system bus
Jan 04 18:23:59 archlinux dnsmasq[407]: no servers found in /etc/resolv.conf, will retry
Jan 04 18:23:59 archlinux dnsmasq[407]: read /etc/hosts - 2 addresses
Jan 04 18:24:12 archlinux NetworkManager[224]: <warn> (cdc-wdm0): failed to look up interface index
Jan 04 18:24:12 archlinux NetworkManager[224]: <info> (cdc-wdm0): new Broadband device (driver: 'option1, qmi_wwan' ifindex: 0)
Jan 04 18:24:12 archlinux NetworkManager[224]: <info> (cdc-wdm0): exported as /org/freedesktop/NetworkManager/Devices/1
Jan 04 18:24:12 archlinux NetworkManager[224]: <info> (cdc-wdm0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 04 18:24:12 archlinux NetworkManager[224]: <info> (cdc-wdm0): deactivating device (reason 'managed') [2]
Jan 04 18:24:12 archlinux NetworkManager[224]: <info> (cdc-wdm0): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
Jan 04 18:25:29 archlinux NetworkManager[224]: <info> (cdc-wdm0) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
Jan 04 18:25:30 archlinux NetworkManager[224]: <info> (cdc-wdm0) modem state changed, 'enabling' --> 'registered' (reason: user-requested)
Jan 04 18:25:30 archlinux NetworkManager[224]: <info> WWAN now enabled by management service
Jan 04 18:25:32 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) starting connection 'O2'
Jan 04 18:25:32 archlinux NetworkManager[224]: <info> (cdc-wdm0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 04 18:25:32 archlinux NetworkManager[224]: <info> NetworkManager state is now CONNECTING
Jan 04 18:25:32 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 04 18:25:32 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 1 of 5 (Device Prepare) started...
Jan 04 18:25:32 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 1 of 5 (Device Prepare) complete.
Jan 04 18:25:32 archlinux NetworkManager[224]: <info> (cdc-wdm0) modem state changed, 'registered' --> 'connecting' (reason: user-requested)
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> (cdc-wdm0) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) scheduled...
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) starting...
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> (cdc-wdm0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) successful.
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) complete.
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 3 of 5 (IP Configure Start) started...
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> (cdc-wdm0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (wwp0s29f7u1i1) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> dhclient started with pid 677
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 3 of 5 (IP Configure Start) complete.
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jan 04 18:25:35 archlinux dhclient[677]: Internet Systems Consortium DHCP Client 4.2.5-P1
Jan 04 18:25:35 archlinux dhclient[677]: Copyright 2004-2013 Internet Systems Consortium.
Jan 04 18:25:35 archlinux dhclient[677]: All rights reserved.
Jan 04 18:25:35 archlinux dhclient[677]: For info, please visit https://www.isc.org/software/dhcp/
Jan 04 18:25:35 archlinux dhclient[677]: Jan 04 18:25:35 archlinux NetworkManager[224]: <info> (wwp0s29f7u1i1): DHCPv4 state changed nbi -> preinit
Jan 04 18:25:35 archlinux dhclient[677]: Listening on LPF/wwp0s29f7u1i1/06:b4:63:3e:31:77
Jan 04 18:25:35 archlinux dhclient[677]: Sending on LPF/wwp0s29f7u1i1/06:b4:63:3e:31:77
Jan 04 18:25:35 archlinux dhclient[677]: Sending on Socket/fallback
Jan 04 18:25:35 archlinux dhclient[677]: DHCPREQUEST on wwp0s29f7u1i1 to 255.255.255.255 port 67
Jan 04 18:25:35 archlinux dhclient[677]: DHCPNAK from 100.80.15.1
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> (wwp0s29f7u1i1): DHCPv4 state changed preinit -> expire
Jan 04 18:25:35 archlinux dhclient[677]: DHCPDISCOVER on wwp0s29f7u1i1 to 255.255.255.255 port 67 interval 6
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> (wwp0s29f7u1i1): DHCPv4 state changed expire -> preinit
Jan 04 18:25:35 archlinux dhclient[677]: DHCPREQUEST on wwp0s29f7u1i1 to 255.255.255.255 port 67
Jan 04 18:25:35 archlinux dhclient[677]: DHCPOFFER from 100.80.15.1
Jan 04 18:25:35 archlinux dhclient[677]: DHCPACK from 100.80.15.1
Jan 04 18:25:35 archlinux dhclient[677]: bound to 100.80.15.16 -- renewal in 3344 seconds.
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> (wwp0s29f7u1i1): DHCPv4 state changed preinit -> bound
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> address 100.80.15.16
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> prefix 27 (255.255.255.224)
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> gateway 100.80.15.1
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> nameserver '8.8.8.8'
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> nameserver '62.40.32.33'
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Jan 04 18:25:35 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 5 of 5 (IPv4 Commit) started...
Jan 04 18:25:36 archlinux NetworkManager[224]: <info> (cdc-wdm0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Jan 04 18:25:36 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) Stage 5 of 5 (IPv4 Commit) complete.
Jan 04 18:25:36 archlinux NetworkManager[224]: <info> (cdc-wdm0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Jan 04 18:25:36 archlinux NetworkManager[224]: <info> NetworkManager state is now CONNECTED_GLOBAL
Jan 04 18:25:36 archlinux NetworkManager[224]: <info> Policy set 'O2' (wwp0s29f7u1i1) as default for IPv4 routing and DNS.
Jan 04 18:25:36 archlinux NetworkManager[224]: <info> Writing DNS information to /usr/bin/resolvconf
Jan 04 18:25:36 archlinux NetworkManager[224]: <info> Activation (cdc-wdm0) successful, device activated.
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) starting connection 'vu+'
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> (enp3s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 1 of 5 (Device Prepare) started...
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 2 of 5 (Device Configure) scheduled...
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 1 of 5 (Device Prepare) complete.
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 2 of 5 (Device Configure) starting...
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> (enp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 2 of 5 (Device Configure) successful.
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 2 of 5 (Device Configure) complete.
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 3 of 5 (IP Configure Start) started...
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> (enp3s0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Beginning IP6 addrconf.
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 3 of 5 (IP Configure Start) complete.
Jan 04 18:25:42 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 5 of 5 (IPv4 Commit) started...
Jan 04 18:25:42 archlinux dnsmasq[407]: reading /etc/resolv.conf
Jan 04 18:25:42 archlinux dnsmasq[407]: using nameserver 62.40.32.33#53
Jan 04 18:25:42 archlinux dnsmasq[407]: using nameserver 8.8.8.8#53
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --insert INPUT --in-interface enp3s0 --protocol t
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --insert INPUT --in-interface enp3s0 --protocol u
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --insert INPUT --in-interface enp3s0 --protocol t
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --insert INPUT --in-interface enp3s0 --protocol u
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --insert FORWARD --in-interface enp3s0 --jump REJ
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --insert FORWARD --out-interface enp3s0 --jump RE
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --insert FORWARD --in-interface enp3s0 --out-inte
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --insert FORWARD --source 10.42.0.0/255.255.255.0
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --insert FORWARD --destination 10.42.0.0/255.255.
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table nat --insert POSTROUTING --source 10.42.0.0/255.255.255.
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Starting dnsmasq...
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> (enp3s0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Activation (enp3s0) Stage 5 of 5 (IPv4 Commit) complete.
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> (enp3s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Activation (enp3s0) successful, device activated.
Jan 04 18:25:43 archlinux NetworkManager[224]: <warn> dnsmasq exited with error: Network access problem (address in use; permissions; etc) (2)
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> (enp3s0): device state change: activated -> failed (reason 'sharing-start-failed') [100 120 1
Jan 04 18:25:43 archlinux NetworkManager[224]: <warn> Activation (enp3s0) failed for connection 'vu+'
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> (enp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> (enp3s0): deactivating device (reason 'none') [0]
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Policy set 'O2' (wwp0s29f7u1i1) as default for IPv4 routing and DNS.
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table nat --delete POSTROUTING --source 10.42.0.0/255.255.255.
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --delete FORWARD --destination 10.42.0.0/255.255.
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --delete FORWARD --source 10.42.0.0/255.255.255.0
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --delete FORWARD --in-interface enp3s0 --out-inte
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --delete FORWARD --out-interface enp3s0 --jump RE
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --delete FORWARD --in-interface enp3s0 --jump REJ
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --delete INPUT --in-interface enp3s0 --protocol u
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --delete INPUT --in-interface enp3s0 --protocol t
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --delete INPUT --in-interface enp3s0 --protocol u
Jan 04 18:25:43 archlinux NetworkManager[224]: <info> Executing: /usr/bin/iptables --table filter --delete INPUT --

My HP laptop with windows 8 won't recognize any library with home sharing; although the other computers do.

My HP laptop with windows 8 won't recognize any library with home sharing; although the other computers do.
I've tried activating and deactivating home sharing multiple times, any other reason why this is happening?
Thanks

A couple of other things you might like to try :-
- Determine whether you are able to access the internet from anywhere else on your new PC (e.g. do Windows updates download ? Can you access the Windows 8 store ? ) If the answer is no, then your problem doesn't lie with IE but with the actual wireless connection. If the answer is yes, then continue as below.
- Run IE from the desktop instead of the Start screen - probably won't make any difference, but worth a try.
- Download a decent browser like Firefox or Chrome and try that - this will show whether the problem lies just with IE or not
- As a general rule, don't do anything that PC World tell you to do, lol !
As gg30340 says, this does sound very much like it MAY be a problem with firewall settings - if you're running Norton Antivirus then I believe that will be providing the firewall service, rather than the inbuilt Windows firewall.
One thing you don't need to worry about - Windows 8 is a perfectly good OS and works just as well as Windows 7 did. I'm using it now !

Adobe Leanprint licence is active on 2 other computers (?)

Leanprint is not working for me saying that the Adobe Leanprint licence is active on 2 other computers (?) and that the activation period for this additional computer has expired. I recently purchased a new computer with these features. Can you advise how to reactivate Leanprint?
Many thanks

You need activation support:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Scroll down and there's a place to start a chat session and get it straightened out.

We have a PC with iTunes that needs the hard drive reformatted. Right now, it can't connect to other computers on the network. Can I save my music to a thumb drive, then re-load when the computer is reformatted?

We have a Windows XP desktop with iTunes for windows. The hard drive needs to be reformatted. Right now, the computer will not connect to other computers on the network. Can I save my iTunes songs to a thumbdrive, then re-load after reformatting? How do I do it?

Copy the entire iTunes folder out to the drive. If it is too big to go as one copy stuff over to another computer in batches. It is important to have not only the media but the library file in order to properly restore your library.
See also this User Tip. Assuming the machine won't connect to the internet you could download the SyncToy installer on another machine and then transfer it with the thumb drive. If it will connect to the net don't forget to deauthorize the machine before reformatting the hard drive.
tt2

My Macbook Air does not show up on my network to any of my other computers, Other computers on my network appear and disappear, some shared folders are not accessible

My Macbook Air with Lion does not show up on my network to any of my other computers (PC's) , even though it is connected to my wifi and does access the Internet. In addition, my other computers sometimes show up in Finder and sometimes they're not there. Sometimes they do show in Finder and when I click on them, I get "Connection Failed", other times, they connect. Also some shared folders on those other computers, which are PC's are not accessible, even though fully shared. My network is Apple Airport Extreme and works perfectly otherwise, including all PC's being able to see each other. Help would be much appreciated

I got the same problem. I want to access my shared folder on my home windows7 from my MBA. Tried many suggestions on the web but all to no avail. I thought that should be very trivial. Maybe a Lion bug?

If I restore my iPod to factory settings, will I lose my music that has been added from other computers, even if I've backed up my iPod?

I'm trying to clean out my iTunes and iPod, and in doing so I've realized that I have over a gig of "other" material taking up space on my iPod. One solution I was told about was to restore my iPod back to it's facotry settings (after you've backed it up) in order to help eliminate or help make the "other" section take up less space. I'm worried about doing this however seeing as my iPod has music from three or four other computers on it seeing as I manually sync music to my ipod rather than have it sync on it's own. I'm worried that even if I back the iPod Touch on my computer, that all the other music from the three or four other computers and iTunes' will be erased and only music left on my iTunes, on my laptop will be left over after words. This wouldn't be such an issue if I didn't have litterally THOUSANDS of music to sort through between these four computers.
Also, does anyone have any other solutions on how to reduce the amount that "other" takes up on your iPod? Thanks in advance! Any help is greatly appreciated.

I'm not sure if you will loose your music or not, but I have a suggestion. If you sinc your ipod to your itunes, all the music from it should transfer to your itunes, it shouldn't matter whether it was downloaded on that computer or not. If you do this and then restore your ipod to factory settings and you do loose your music, then you can just sinc your ipod to your computer, or itunes account and then you will get your music back. I hope this helps. :)

When I compose an E-mail my address book will not open when I click on TO or CC, but it does work on other computers and also if I use explorer.

My address book will not show when I click on the TO or CC button, a mozilla page does open but there is no content. My E-mail accounts work fine on other computers. It also works fine on this computer if I use Explorer instead.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.1 r53
* Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/
You can also try to disable the "My Web Search Plugin Stub for 32-bit Windows". 
See [[Troubleshooting plugins]]
http://www.safer-networking.com/removemywebsearch.php
http://www.pchell.com/support/mywebsearch.shtml - PC Hell: My Web Search Removal Instructions

New 13" MacBook stops other computers wireless Internet access

Since adding my new 13" Aluminium late 08 Notebook other apple computers on my apple wireless N extreme network can not use the internet. I have removed the other computers one at a time but it makes no difference. when I add this notebook it stops any of the others from using the internet but this is ok.

Thank you for your help.
Yes DHCP is enabled and this computer has a different IP address to the others.
I have read other users with the same problem which appears to be unresolved at this time.
I am wondering if it has something to do with wireless N mode or maybe something to do with the ADSL modem?

Can't see other computers on network through wireless/wired OK

Our wireless clients that connect through our AP541N cannot see other computers on the network. They can ping other computers by IP and host name and access the internet OK. Mapped network drives can be connected initially but are very unreliable and always end up disconnecting. Restarting the computer does not help. When these computers are wired they see the network as expected. Does anyone know why my wireless network would behave differently then the wired? The wired and wireless networks are on the same VLAN. The wireless clients are all Windows 7 systems. Thanks.

Hi Andy,
Thank you for posting. Go to Wireless Network Setup (VAPs) and see if Station Isolation is enabled for the SSID in question. From the Help menu:
When Station Isolation is disabled, wireless clients can communicate with one another normally by sending traffic through the AP.
When Station Isolation is enabled, the AP blocks communication between wireless clients on the same VAP. The AP still allows data traffic between its wireless clients and wired devices on the network, across a WDS link, and with other wireless clients associated with a different VAP.

Downloading iPhone 3GS photos and Videos to other computers

I recently got my first iPhone and am still finding out how to do things, so, apologies if this sounds dim but....
How do I download photos and videos from my iPhone 3GS to other computers?
I can plug in to my mac and sync everything with iTunes - no problem
I can plug into a PC and open up the iPhone files and copy across to the PC- no problem
BUT
If I plug a mac other than my own it just opens up iTunes. How can I copy a photo onto this mac without syncing the whole thing?
Thanks in anticipation.
Rob

When iTunes opens up, just close it down, because you do not want to sync with any computer other than the computer you normally sync with. Then launch iPhoto & you can then import the photos/videos in your camera roll. Photos/videos synced to your phone cannot be imported to any other computer.

CS2 deactivation on other computers

Similar Messages

Maybe you are looking for