CS2 Eye dropper and clone tool not picking up correct colour from image.

Hello everyone, Can anyone help me please. I have an iMac with 0SX 10.4.4.
Plenty of Ram and hard drive space. In using CS2 the eyedropper and clone tools will not pick up the exact same colour from the image that I require. It is always lighter in shade and has on occasion been white. Any help in solving this problem will be much appreciated.
Yours in anticipation, Geoff Walter.

>The eyedropper is picking-up the color as rendered in RGB on your Monitor...
Really? Not from the pixels in the file? So the same pixels are reported with different values depending on monitor setup? This is about how the eyedropper reports pixel values, not about how they are rendered to the screen, is that correct?
Just to be sure here, this is so even with the eyedropper set to point sample?
Al
Edit: Or do you mean that this is a known problem with 0SX 10.4.4. and Photoshop, in which the values are picked up from the monitor and not from the file data?

Similar Messages

Lift and Stamp tool not working so well? White images!?

Here's a strange issue.
I worked on an image yesterday. Today, I want to copy the adjustments to another image in the same project. When I use the Lift and Stamp tool to copy the adjustments, the new image turns completely white. Even though I checked the adjustments and they look the same as the original one, the new image is all white.
Now the strange thing is when I adjusted another image today then used the Lift and Stamp tool, the adjustments copied over fine.
The only thing I can see which is different from the image I adjusted yesterday is that I had Aperture send that image to CS4 and I edited a TIFF which I stacked back with the original file.
I'll try to make a screencast available so you can see what's going on.
Looks like Apple's going to need to update Aperture 3 before it really comes out.
Antonio

Thanks for your effort. I am stunned. Would be edifying to know what is happening! I thought it might be okay as I sometimes turn my image black after applying some change, but the black is only a temporary display problem as the image is correct the next time I go to use it; perhaps in my situation Aperture was busy generating new previews for presentation of the changes. Your white is certainly a different issue. Glad it's only an isolated incident and not happening for you on the other images.

CS4 Clone Tool NOT Multithreading and CS4 Slow on i7 965 Processor

I noticed for the first time that the new clone tool in CS4 is not using all of my processors on my new i7 965XE processor. In fact it uses only one processor and this makes it run incredibly slow. I have also noticed that CS4 in general is rather sluggish on this hardware which is supposedly one of the most powerful processors available. I am running the i7 965XE with 8GB of Ram and still find Photoshop rather slow. I would expect it to be super snappy on this hardware, perhaps I need to optimise settings somehow, does anyone have any suggestions or is CS4 not equipped to properly address the i7 processors yet???
Any help appreciated.
My version of CS4 is 11.0

Mike, could you take a moment to reread your original post?
"CS4 Clone Tool NOT Multithreading"
"In fact it uses only one processor and this makes it run incredibly slow."
Those are not observations and represent two direct conclusions, both of which are incorrect. The first conclusion is that the clone tool is not threaded for multiple processors (it is). The second conclusion is that the lack of threading is what makes the clone tool run slow on your system (almost certainly not the case).
Implied in your statements is a third conclusion: that using more processors makes things faster (rarely true). That is a common enough fallacy that I felt the need to offer a more detailed explanation to help you and other readers understand more about the issues involved. I tried to keep that explanation short and simple.
I gave you an alternate hypothesis (small clone area) that could have explained your observation, since you didn't provide enough details for us to rule that out.
I also gave you more information about what is going on under the hood to help you understand why you observed what you did on processor usage.
Then I pointed you to existing topics that offer a much more likely explanation for the slowdown you are seeing.
If you had described with the clone tool slowdown without the incorrect conclusions and without phrasing most of your post as accusations, you probably would have gotten useful help from other users more quickly. Even my first instinct was to ignore your post, but it sounded like you were confused, a bit angry, and needed some help.
I am sorry you read things into my post that I did not intend. I'm simply trying to help you understand what you observed, and find a solution to the problem you described.

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account and reseting it and it still only picks up the old messages? Anyone else having tis problem? ANy ideas how to fix it?

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..) and setting the account back up? and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
This just started happening for no reason...no changes to the phone or Ipad?

my iphone and ipad will not send or receive emails or messages for the last few days. it is telling me that cannot connect to server

My IMAC screen went to sleep and I have it set to enter a password upon waking it up. However, my bluetooth keyboard died while it was asleep and I replaced the batteries and tried to enter my password and it is not picking up my keyboard. What can I do?

My IMAC screen went to sleep and I have it set to enter a password upon waking it up. However, my bluetooth keyboard died while it was asleep and I replaced the batteries and tried to enter my password and it is not picking up my keyboard. What can I do? I will not let me enter my password to get in and trouble shoot the keyboard. Please Help!!

I pushed in the button on the top right corner. It turns a green light on and then it goes off. I held it in until it started blinking. It blinks for a bit and then the green light turns off. I am still not able to type my password. What should I do now?

Content aware move and extend tool not working in PSE12

Photoshop Elements 12 content aware move and extend tool not working with Yosemite upgrade.

Have you deleted the preferences and the saved application states?
A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

HT1296 My Outlook 2010 is not picking up calendar entries from my 4S, and the phone is not picking up calendar entries from Outlook 2010. Help, please!

My Outlook 2010 is not picking up calendar entries from my 4S, and the phone is not picking up calendar entries from Outlook 2010. Help, please!

Only the carrier it is locked to can authorize unlocking it. Contact them.

PO not picking up the Price from Info Record ???

Hi,
Pricing Procedure and the Schema Grp is defined in Schema Determination in SPRO.
Schema Grp has been assigned in the Vendor Master.
Price has been maintained in the PB00 condition type in the Condition Supplements screen, but shows 'Zero' in the 'Purchasing Org. Data 1' screen of Info Record.
However, while creating PO the system does not pick up the Price from the Info Record and both the Condition Types PB00 and PBXX appears and display the Amount as 0.00 ? Also the system does not take the value entered in the 'Net Price' field and the Price can only be entered manually in the Conditon Type in the Conditions Tab ?
Can anyone help in resolving this issue ?
Lucky.

Hi Lucky
1.Routine 6
This is an example of a pricing requirement. This requirement is met if the condition exclusion indicator is not equal to 'X'. <b>This requirement can be assigned to a condition type in the pricing procedure to ensure that it is not accessed when a condition record with exclusion indicator 'X' has already been found</b>. Condition exclusion is a general tool that can be used to exclude conditions from pricing based on previous conditions that have been found in the pricing procedure. This requirement is intended for use in MM pricing versus SD pricing. For SD pricing, a variation of requirement '2' should be used which would also check to see if the item category is relevant for pricing
2. You have define all your supplementory condition in supplementory pricing procedure and you have to assign this supplementory procedure to your Condition type PB00.Then all these conditions will be displayed at item level for selection in drop down.
Since the supplementory conditions are dependent on PB00, you have assign to the PB00.
If you maintain the values for these conditions in info record, these values will be copied from info to PO.
Regards
Ramakrishna

HT1338 I have iMac 105.8 and want to upgrade to Snow Leopard, so got the disc from apple on line store and it will not install, just keeps ejecting from my desktop

I have iMac 105.8 and want to upgrade to Snow Leopard, so got the disc from apple on line store and it will not install, just keeps ejecting from my desktop

You have entirely too little free space on the boot drive, for best performance it's best to have hard drives only 50% filled max and never more than 80% filled.
See Storage Drive here and reduce some space also make a seperate bootable clone backup of all your data BEFORE upgrading
Most commonly used backup methods
see here for how to find your disk space
Why is my computer slow?
If you upgrade and it doesn't go right or slows the machine down you might need to erase and install, which all your programs will have to be reinstalled from original sources and files from backup.
How to erase and install Snow Leopard 10.6
If you can't do this, then hire a local PC/Mac specialist.
Do not upgrade to 10.7 or 10.8 on that older machine, it will slow down and you will lose all your PPC based programs.
Leave the Lions for a brand new machine with a SSD drive.

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

Stamp tool not generating the same colour as the sample area I select.

Heya, I am having an issue with the stamp tool not generating the same colour as the sample area I select. I have tried reducing the flow rate but my understanding was it should be an exact copy of the ample area. I have only had this issue for the last two versions of photoshop.
Cheers, Andy

function(){return A.apply(null,[this].concat($A(arguments)))}
UltimateTop Trumps wrote:
I create a shape and then put a shape inside, right click and choose Make Selection and the inner shape disappears leaving the larger outer shape.
function(){return A.apply(null,[this].concat($A(arguments)))}
UltimateTop Trumps wrote:
Another weird thing is that when I use a filter it applys it outside of the selection, but this is not as annoying as the original issue.
This occurs when you use the quick mask to create a selection. Did you?
miss_marple

Service entry Sheet does not pick any Condition charges From Service PO

Hi All
Service entry Sheet does not pick any Condition charges From Service PO. What could be the reason ?

HI,
Please check Sap note 381030
Along with other thing It says
"Delivery costs are generally not supported in external services management and in case
of blanket purchase orders, item category D or B. Instead of representing delivery
costs via conditions, in case of service documents, freight costs and other, SAP
recommends to add in additional service lines."
So that is the reason you are not getting those account entry in the time of service entry sheet
Use another service line with text ( or service master) for the additional costs as suggested by SAP
Hope it clarifies

Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera. How can I get my files open to view and edit? I am using LR3, Photoshop CS3 and Bridge CS3. Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file" ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
Please help!!!

Unless I missed an announcement, today, LR6 isn't available, yet, right? Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
LR5 is available as a standalone version.
PS-CS6 is available as a serial-number-licensed version.
PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
Bridge is part of PS, not a separate program.
LR5 standalone and LR+PS-CC plan are both available on this page: http://www.adobe.com/products/catalog/software.html
PS-CS6 can be found on this page: Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. What do I do to fix this?

I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. I downloaded the camera raw and dng converter for it, but realized in the process that the one I downloaded does not work with my Mac version, 10.9.5.

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium

I'm using iphone 4S, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. can someone help.

I'm using iphone 4S and ipad mini, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. Can someone help...
Thanks in advance

Hi Eidda,
This may because the attachment is a winmail.dat file. I would recommend taking a look at the article below for more information. Note: the article is written for OS X mail, but does also apply to this situation.
Mac OS X Mail: What is a winmail.dat attachment?
http://support.apple.com/kb/HT2614
-Griff W.

CS2 Eye dropper and clone tool not picking up correct colour from image.

Similar Messages

Maybe you are looking for