CS2 on Windows 7....Almost there
I've almost gotten everything up and running on the newer laptop finally. Used the download software from Adobe with the different serial number to avoid activation requirement vs. my discs. Used corrected install path to land in the x86 folder. Fixed the issue when the installer wouldn't run, (giving the "missing or invalid personalization information and missing resources library" error which, for me was apparently caused by an incomplete uninstall. I used an uninstaller called Revo which cleaned up everything and then the install ran perfect.
During install, I entered the new serial number and my info. When it finished I started the programs to check all was good. Only partially. Photoshop and ImageReady started and work fine. Started Illustrator and it eventually hangs and goes unresponsive. It will even give me the first screen with options for new or open files and navigate to a file. Once I choose the file or choose new from the first screen, this is where it hangs.
Upon starting InDesign, I got a screen asking for my name and serial number. I typed the serial provided with the download and same as I used during installation but it says the serial number is invalid. Tried with and without dashes and also tried my old number for the original discs in case it was checking for my real license.
Considered trying to reinstall the two not working programs but oddly, I'm back to getting the "missing or invalid personalization information and missing resources library" when I tried to run the installer again.
Has anyone else gotten to his point and solved getting InDesign and Illustrator running again?
Thank you!
And....to continue to add to this, after a restart, Photoshop is also now not opening a file. Like Illustrator, I can navigate to a file, pick it, the preview shows, hit open and it hangs there and never will open the file and the program goes unresponsive.
All program start exe files have had properties modified to rum in xp3 compatibility mode and run as administrator.
Image Ready still actually opens a file.
Similar Messages
-
[CS2 on Windows XP]: Is there a way to modify the JPG compression in an SVG?
Hello,
I have got an EPS file.It contains some text, some paths, and a rastered image.
Saved as a JPG with moderate compression it is 125KB in size. For an EPUB I want to insert is as an SVG. But when I save it as an SVG (text being converted to paths) it is over 600 KB and thus exeeding the 300k limit that exists for files within an EPUB container.
Is there a way to have the JPG stream in the SVG more compressed? The W3C spec of the SVG format doesn't say anything about a fixed compression level, so I guess the compression can be varied. But Illustrator CS2 doesn't seem to have any appropriate setting.
Best regards,
Christian KirchhoffIf anyone is interested, I got an answer on StackOverflow
here.
Adrian -
My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Install CS2 on Windows 7 32bit and 64bit, please help!
I own a legitmate CS2 Creative Suite and my old Windows XP computer must be retired. Is there any way for a non-technical person like me to install CS2 on Windows 7 64bit? I saw some instructions but they seem geared to very computer knowledgable people and I got lost just reading them. Also, I saw new that CS2 was or is being offered fro FREE from Adobe? Is that true?
OR, will CS2 as a 32bit application be more easily installed on Windows 7 32bit without any special install instructions?
Thank to alll who can help this pathetically technically challenged person! I can NOT afford to upgrade CS2.Option 2 here: http://forums.adobe.com/message/4715553 seems to work:
Copy the installer to your local drive. Right click Setup.exe, Properties > Compatibility tab > Run this in compatibility mode. Choose XP SP2. Click OK. Run Setup.exe
And yes, you can download and install them, see:
http://forums.adobe.com/message/4976177
There is still ongoing discussion whether anyone is entitled to install it, or only users with a valid license, but it seems Adobe does not care. -
Photoshop Cs2 with windows 7 64 bits
i find that the printer icon in the page setup page is missing.
can anyone help me to solve it, please.
i cannot select printer while i am in the page setup tab.
or it is a bug in photoshop cs2?Windows 7 x64 is a separate build from Windows 7 32 bit. Windows 7 Ultimate comes with BOTH.
There isn't a separate package of Photoshop CS5 for 32 bit or 64 bit. Photoshop (since CS4) installs both 32 bit and 64 bit software on a 64 bit Windows system, or only 32 bit software on a 32 bit Windows system.
Photoshop CS5 is fine with every variant of Windows 7.
Photoshop CS5 is reportedly fine with modern AMD processors, though I have only used Intel.
The detailed system requirements are here: http://www.adobe.com/products/photoshop/photoshop/systemreqs/
My own (personal, subjective) opinion is that ATI (AMD) video interfaces are better than nVidia.
Hope this answers your questions.
-Noel -
Up and Down Arrow Keys Not Functioning in CS2 for Windows
A little over 6 months ago I purchased Adobe Photoshop CS2 for Windows XP and installed it on my work PC and my home PC. Everything works fine and dandy on my work PC, however when I try to do some editting on my home PC there are some quirks that I can't figure out. The main thing is that my Up/Down Arrow Keys do absolutely nothing. Whether I am trying to edit text and scroll through my fonts or if I'm trying to nudge a part of a picture, the Arrow keys do nothing.
Does anybody have any suggestions for me?
Any help would be greatly appreciated.
Thanks.>but that's beside the point.
it's not. what you describe is typical behavior of a high quality cracked version that's been floating around. a great copy with shrink wrap, nice manuals, etc. but you've been burned. usually the discs are stamped "made in singapore".
try to get your money back. -
Version 6 & 7 always start with the "Almost there" message. How do I stop the message?
When I start Firefox on one computer, the first tab opened is always an "Almost there" welcome message (http://www.mozilla.org/en-US/firefox/2.0.0.6/whatsnew/). This is not the home page which also opens in another tab. This happens in all accounts on this computer, running Windows XP SP3 Professional. I have uninstalled and re-installed the software. I have attempted to delete all associated files. I have attempted to delete all entries in the registry. This problem has existed since sometime in version 5. How do I stop this? Thank you for your time and assistance.
See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved -
I have a Student license for Creative Suite 5.5 for WINDOWS. Is there a way to transfer it to MAC?
I have a Student license for Creative Suite 5.5 for WINDOWS. Is there a way to transfer it to MAC?
As I'm satisfied with what I've got. I would like to avoid purchasing a new license for almost exactly the same thing.
Thanks,
ÉtienneHi Sven,
Welcome to Adobe Forum,
Please delete the C:\Users\<UserName>\AppData\Local\Adobe\AAMUpdater directory.
Rename the C:\Users\<UserName>\AppData\Local\Adobe\OOBE\OPM.db to OPM.old
Then please try reopening your web browser and downloading and installing the Creative Cloud application fromhttps://creative.adobe.com/products/creative-cloud.
Or you can try:
Until this gets sorted out, here are the Creative Cloud direct download links... As/when needed, you can use these to download the Windows or Mac OS installers for any CC program without using the Adobe Desktop App manager.
Please refer to : http://helpx.adobe.com/creative-suite/kb/troubleshoot-creative-cloud-installation-download .html
Hope it helps you.
Regards,
Rajshree -
Has anyone successfully installed CS2 into Windows 7? I've tried to install, but keep getting told that the serial number is incorrect when I know that not to be the case.
Thanks in advance.I am glad I read your response, Bob.
I too had the same problem. I'm running Windows 7 Ultimate. I tried loading CS2 on our new system but mistakingly entered MY name instead of my wife's registered name, and CS2 refused to run. But up to that point it appeared it -might- have been able to run successfully. That was Problem Number-1.
Here's Problem Number-2: Upon atempting to un-install the CS2 program the following message appeared: "Missing or Invalid Personalization Information, Missing Resources Library." What could be worst? I can't even un-install the software!!!
I called Adobe and was dumb-struct at being informed "...we don't support CS2 anymore"! That, in my opinion, is absolutely foolish and non-scenseical on their part because in the least, they could have supported me and prepped me to upgreade and purchase CS3 or 4.
I also tried to re-install CS2, again, on top of its un-installable condition and got the same message as above "Missing or Invalid.... " And so I remain stuck, three (3) months now without a clue as what to do to get out of this conditon.
I even -manually- deleated as many files as I could in the CS2 Programs File directory in an attempt to get some of the "nay-sayers" un-install obsticals out of the way but, I still can't remove the program, nor re-install over it.
I was able to load CS2 into Window 7's Virtual PC mode. But it can not run there as efficiently as I imagine it might in Programs (x86), or in 64 bit mode if it were indeed possible.
I refuse to believe that I alone, out of millions of CS2 users, am in this problem alone.
I need help Abode! I need help with this Bob! I need help from anyone who can help me get out of this mess. Thank you. -
Photoshop CS2 on Windows 7 - unable to boot up after installing
Hi everyone, I really hope anyone can help me with this!!
Ok, I've always used Imageready CS2 to open avi files to edit then save as animation GIF without affecting quality (which part of PS CS2 that I did pay for) on my old laptop with Windows XP in the past.
Since then I've got a upgrade to PS CS5 (paid for) which I've installed successfully onto my new laptop with Windows 7 but till now, I'm dismayed to find that I'm unable to open avi files in PS CS5 just because I have 64 bit, not 32 bit even though I couldn't find the 32 bit program anywhere (apparently I found the 32 bit by searching in start up button but it still opens as 64 bit?).
So I thought I'd try installing PS CS2 into Windows 7 using my CD and found that the activation part doesn't work anymore which leads me to finding that I could download a copy of PS CS2 without the activation bit (yes I did the uninstall before installing PS CS2 without activation) everything was great BUT...untill I tried booting up my laptop next time, it wouldn't start up properly at all, it would only manage it to that Boot Screen Animation then blackness with the cursor in the middle or rarely to the log on screen that doesn't work but thats it so I had to do a system restore to get it back in working order minus the PS CS2
I thought it was the fault of other things I've downloaded at around same time like xvid decompressor codecs (so I could use VeeDub64) so I downloaded the codeces from different source and restarted to see if it boots up ok (it did) so I tried installing PS CS2 again but same thing happened on restart - failure to boot up and I had to do a few system restores (as some of the points didn't work ) before I barely got it back in working order yet again....
I see that some people have PS CS2 that works perfectly on Windows 7 with 64 bit because they changed the file path when installing the program? Or was I supposed to have the 32 bit program somewhere although maybe I don't have it since my PS CS5 is not extended? Would either of those work? To be honest, I'm quite reluctant to try as I may end up killing my laptop this time around and it's only around 2 years old!!
Any help would be MUCH appreciated!I'm happy to report that I've managed the resolve this issue of mine
After a little discussion with customer support through online chat today, I was still advised to try the uninstall and install to see what happens.
So I used the CC cleaner tool first, restarted then started by installing CS2 then CS5 using my serial numbers and made sure that I selected 32 and 64 bit programs to be installed
Anxiously, I restarted my laptop to see if it would reboot okay and thankfully it did *relief!*
Now I can open avi files using 32 bit of Photoshop CS5 without any problems (thank goodness!!)
I think I probably didn't install the 32 bit program when I first bought the installation CD, since I thought I didn't need it but never knew it was still required for editing avi files!!
Surprisingly, I still got to keep both versions of CS2 and CS5 this time around, as CS2 was simply replaced by CS5 when I first installed it two years ago....hmm.
So thank you again gener7! -
This window looks weird: there are 2 blue bars(the upper blue bar - normally there is 1, with the current page name and - Mozilla Firefox written in white inside of the bar) plus in the 2nd bar there is an orange firefox button, on the left hand side.
I have already asked this question and was adviced to start in safe mode - this did not help either.
Please help me quickliy, it is really annoying.
Thanks
Richard'''Firefox Crash'''
Create a New Profile as a test to check if your current profile is causing the problems.
-> Basic Troubleshooting: Make a New Profile
* https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
-> If that New Profile works then you can recover your Bookmarks and Passwords from the Old Profile.
-> Recovering important data from an old profile
* https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
'''Opening Links in New Tab'''
-> click '''Firefox''' button and click '''Options''' (or Tools Menu -> Options) -> Tabs panel -> place Checkmark on '''Open New Window in a New Tab instead''' -> click OK
Check and tell if its working. -
My computer with Windows 7 says there is no iPod when I run Device Sync diagnostic test on my iTunes, even though my iPod shuffle is in the dock. How can I fix that?
Hi there JMW1973,
You may find the troubleshooting steps in the article below helpful.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
-Griff W. -
Windows No Disk There is no disk in the drive. Please insert a disk......
Help! Just recently this message window has been appearing everytime I open up iTunes:
Windows No Disk
There is no disk in the drive. Please insert a disk into drive.
iTunes was humming along nicely for over a year with no problems. All of a sudden this message keeps popping up. I can still use iTunes to its full capacity, but this annoying little window is beginning to push my blood pressure up.
Has anyone else experienced this problem?
ThanksAny thoughts?
all manner of thoughts. some might even be relevant to the matter at hand ...
okay, back in the days of new itunes 6.0.0.18 and 6.0.1.3 installs, we used to sometimes get reports of Windows asking for all sorts of disks when people tried to launch itunes after an upgrade. (sometimes it would be like your message, sometimes it would be asking for a specific disk with no apparent connection to itunes.) i never did manage to work out what precisely was going on with it. my best guess was that the installation scripts in the itunes installers (or QT 7.0.3 installers) were sometimes activating other installation routines for other programs. (i've seen your message show up before when i've tried installing other software on my PC from a disk.) whatever it was, it seemed to stop happening to people from itunes 6.0.2.23 (and QT 7.0.4) onwards.
i was wondering if we had an even weirder version of that going on with your message (only it started happening after an install of a different package). that's why i was checking up on the version number of your itunes before.
assuming for the moment that you do have an itunes 6.0.0.18 or 6.0.1.3 in there, we might as well try something that could fix the version of the message that you're getting. sometimes if people put a CD (an audio CD is fine) into the disk drive prior to launching their itunes, they wouldn't get that message. sometimes, they wouldn't get that message ever again even if in future launches they didn't have a CD in the drive.
if no joy with that (and you're currently at 6.0.0.18 or 6.0.1.3), we might try an upgrade to 6.0.4.2 (working on the principle that we haven't seen this often if at all since 6.0.2.23 came out, and 6.0.4.2 is more stable and/or more readily available than 6.0.2.23 or 6.0.3.5).
keep us posted.
love, b -
regarding difficulty downloading photos from camera to PS CS2 in Windows 7. I don't know how to reply as I am new to this forum.
Thank you,
Elena de la Vega -
I want to move syncing my iphone from one computer to another. (windows based) Is there a one stop way to do this?
ThanksCopy everything from one computer to the other then sync.
-
Ok I am really a new user of Mac so here is my problem when I bring up Safari and I go over to the Help word on the top of the screen to find a question when I pick a question and the window comes up there is a blank window nothing is there the help boxes work on my other Apps so whats wrong. Help
Could you please give us a picture of what is going on. This is a picture of what the top of Safari looks like when I go to the Help menu. I typed in the word cache and a number of options appeared below. Is this not happening for you?
Maybe you are looking for
-
have marked to not copy in advanced options, but still copies files.
-
whenever i try to install creative cloud a prompt appears saying " adobe quit unexpectedly, its missing or damaged download a new one.. when i do it just says the same thing! how do i fix this
-
External firewire drive damage from bad port?
After plugging my LaCie 200 Gb firewire external drive into a PC, I can no longer mount it on my mac. Plugging it in freezes access to other attached firewire devices, which recover after it is unplugged. A second drive was damaged in the same way by
-
hello,everybody I need to exchange a Purchase Order in one B1(B1_Sender) and transform it into a Sales Order in another B1(B1_Reciver) but failed. my step : 1.I followed the instruction and installed everithing. 2.I create the sysytem lanscape, test
-
hello guys, 1> where can i maintain the fields, when i create a profit center?? 2> when i was doing downpayment for vendors in f-48, it is asking for the tax code, where can i maintain those tax fields. Can