CS2 Premium not working after re installing on Windows Vista

I reformatted my computer and re installed CS2 Premium in a new laptop with Windows Vista; however, when trying to open one of the applications such as Photoshop it says "user name, organization, or serial number is missing or invalid." Adobe does not offer tech support for CS2 anymore so my only hope is your expert information. Thank you.

I got the same problem with my CS2. I recently bought a new computer which is windows vista 64 bit, and I tried to install my old CS2 on it and every program gave me that error message when I tried to run them. I called customer support, and the answer is the same, they dont support CS2 anymore and they expect you to buy their CS4. I mean I spent $$$ on it 2 years ago and you tell me to spend another $$$ to buy it again? This is purely insane.

Similar Messages

  • Satellite P305-S8820 - FN key not working after clean install of Windows 7

    Hi,
    I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
    Any ideas?

    Hello John
    You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
    Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
    You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
    Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

  • Re: Satellite P305-S8820 - FN key not working after clean install of Windows 7

    I have a problem with a Satellite A210-103. After installation of Toshiba Value Added Package (Flash Cards Support Utility not available for A210), reboot, restarting Toshiba Flash Cards and pressing the FN key several times the problem still exists.
    It must have other reasons why so many user have problems with the FN keys.
    John

    I have searched for A200 and A210 in the Toshiba sections of Equium, Satego, Satellite and Satellite Pro but their are no Flash card support utility. In the details of the "Value added package" are the words:
    "TOSHIBA Flash Cards provides the Hotkey function and the launcher function that starts the Hotkey function and launches the other TOSHIBA utilities"
    So I think it's useless to search for this utility. It's more important for me to know which files (like name of the launcher program) must be started to use the FN keys.
    John

  • Flash player does not work after I installed it

    Flash player does not work after I installed it

    I'm using Mac Osx and my browser is Safari
    Date: Wed, 5 Feb 2014 00:41:29 -0800
    From: [email protected]
    To: [email protected]
    Subject: Flash player does not work after I installed
        Re: Flash player does not work after I installed it
        created by Mike M in Installing Flash Player - View the full discussion
    This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
    What OS are you using?
    http://mmonlinedesigns.com/images/os.png
    What browser?
    http://mmonlinedesigns.com/images/browsers.png
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Installing Flash Player at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • IMessage not working after IOS7 install?

    iMessage not working after IOS7 install?

    Yep, it has issues. Word is that Apple is working on an update to fix it but no idea when it'll be rolled out.

  • TS1702 Certain apps will not work after ios6 install.

    Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

    My husband had the same problem with some apps after I updated his iPad 2 to iOS 5.  I checked the app store and there were updates for the apps to support the new software.  After updating, all apps work just fine.

  • Adobe reader not working after cs5 install

    adobe reader not working after cs5 install

    Nobody can tell you anything without proper system info or other technical details like exact version info.
    Mylenium

  • T mobile broadband stick not working after lion instal

    T mobile broadband USB stick not working after lion install

    No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

  • HP Pavilion DV5000 : Conexant Audio HD sound not working after upgrade XP to Windows 7

    On HP support site there are no drivers for Windows 7 for Conexant Audio HD soundcard in HP Pavilion DV5000.
    Have tried installing Vista drivers in stead, does not work.
    Have tried renaming unzipped Vista files to camcaud.sys & camchal.sys and copied them into Windows/System32/Drivers and reboot, does not work.This is the only solution I found after reading forums for several hours, but does not work.
    Would very much appreciate help.
    Thanks.
    This question was solved.
    View Solution.

    My solution is here (registry editing required):
    Conexant audio (vendor 14F1, device 5047) – no sound on Windows 7 – solved

  • HP Advisor, for m9040n HP Pavilion vista home premium not working after installing update.

    I have a m9040n hp pavilion desktop with vista home premium.  My hp advisor will not work. When I go to the menue to pull it up the icon has changed and is an icon of white pages. When I select the icon Hp Advisor it gives me a gray dialog box called the file type assistant.  For searching for software to open the file. I've tried to install the sp 43112.exe update recommended for my hp pavilion m9040n with vista home premium but my hp advisor is still not working. Any ideas as to why my installing the update failed?  Is there anything I should do beforeinstalling the update?

    Rkmccoy25,
    I understand you’re stating the HP advisor isn’t working correctly after an update.
    Try doing a system restore back a day or two before the update occurred, if you haven’t attempt that already. Below are the instructions on how to do a restore if you’re unsure.
    How to do a system restore
    Please respond at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Mail search not working after clean install of 10.5.4 on new 20" iMac

    Apple Mail search is not working. Search on "subject line" works, but search on "entire message" does not. For example, searching with "parking" yields NO results, and there are many messages with the word "parking" in their body in the mailboxes. It happens with both "In Box" and "All Mailboxes" checked.
    What's going on?
    I did a clean install of Mac OS X on a 20" iMac using the Install disk shipped with the machine. Then I ran Software Update. Still, the problem happens, on a clean baseline system.
    Argh.

    I've had this problem since Tiger. Various solutions have been posted, but none have worked for me. It really cripples Mail--I've used emails as my personal database for years, kind of a history log, which worked great in Eudora but Eudora isn't being supported anymore.
    After updating to X.5.5, I can search "entire message" for "All Mailboxes" and find everything including emails in the mailbox I was viewing (often finds 60,000 occurences, but doesn't take very long--it's just incredibly tedious to find the one I want from such an enormous set of results). I can also find everything using Spotlight, outside of Mail. But if I am looking at any mailbox, like Inbox, search "entire message" never finds anything at all. Searching for subjects etc works fine.

  • Time Machine not working after Lion install

    After Lion install at first Time Machine would not back up-then it did, but backed up the entire HD-now Time Machine will no longer function in trying to retrieve any data from Mail or anything else

    After consulting with maker of back up drive (LaCie) I opted to format the drive. Lost some stuff but nothing critical. I then backed up and now all appears to be working, i.e drive is backing up and Time Machine is now functioning.

  • Canon MP 600 Printer not working after Leopard Install

    I installed the Leopard OS and now my Canon MP 600 printer that purchased at the MAC store with my Mac in Aug of this year. It was working properly prior to the Leopard install. I tried re-installing the printer drivers, but no change. I can see my MP 600 as the only printer available. I am also unable to even print a 'test' page. When I run the Network Diagnostics everything is fine, but no printing.
    Any suggestions?

    I tried this. I also tried updating the CUPS config file as was noted elsewhere. The printer is a total no-show on Leopard.
    It is being served by an older G4 whose only job is to serve the printer.
    On Tiger it would just *be there* to print to. All the Panther computers see it as a "shared printer" in the printer box.
    In Leopard.... not a &^^&% thing.
    Not happy.
    deviztate wrote:
    Are you using a gimp driver? I had the same issue and gimp was the cause. I went to the Canon website and found the driver I needed. After the install and restart all was well. In fact, when I opened Print Utility, I saw that the system had already defaulted to the new Canon driver. Here's the Canon link...
    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=182&mo delid=12892
    Navigate to drivers and downloads... Hope this helps...
    -d

Maybe you are looking for