CS2 reinstall on Vista fails due ID issues

I bought Creative Suite CS2 several years ago and have used it productively until now. My old computer conked out so I purchased a new motherboard and hard drive and upgraded from XP to Vista Home Basic. I reinstalled Creative Suite using the original discs. Everything seemed to proceed well, including the online activation which indicated success. However, when I attempted to open a program i.e Photoshop, I got the message "Your Adobe Photoshop username, organization, or serial number is missing or invalid. The application cannot continue and must exit." I have reinstalled several times, carefully entering my information, only to meet with the same results. Any suggestions would be gratly appreciated.

With respect, Bob & Michael (for I do respect your input in these forums), this is a matter of correct semantics.
Yes, Bob, you are correct that CS2 is not supported by Adobe under Vista--which means if you have problems you are on your own. However, it is inaccurate to say that CS2 is not compatible with Vista, for that would mean that it does not work at all--sort of like a Buick going 60 MPH is not compatible with a brick wall. I can assure the OP that while the CS2 I have been using for years is not officially supported by Adobe, it certainly is compatible with my Vista 32 bit.
I am not at all addressing such issues as activation, 64 bit, or whatever. I am simply saying that it is not accurate to state flatly, without caveat, that CS2 is incompatible with Vista. That is not true.

Similar Messages

I cannot reinstall java after uninstalling due to issues with it.

Well, over the past few days, I have been unable to use anything to do with java. After asking around a bit, I was told I should reinstall java. So, I removed anything to do with Java, and then went to system update to re-download it.
Now, the funny bit. (maybe)
After removing it, I checked for updates via system update, and, lo and behold, it wasn't listed as an update.
I am wondering, how do I re-download it, and without the issues it has been having?
I run a 10.6.8, with a 2 GHz intel core 2 duo.
Thanks.

Klaus; When I tried that, it said seomthing about it not being recognized >.>
I'll try a re-install if things get desprate, I live somewhat rurally, and got some tech savvy people to install, so I'de have to take it in >.>
thanks guys

CU5 failed due to issues with receive connectors

We have a CAS server (mail1, 10.1.0.26) and Mailbox server (mbx1, 10.1.0.25). When I ran the update on the mailbox server, it failed with the following errors (see below). The update completed successfully on the CAS server. It appears
I have a problem with receive connectors. I really could use some help please. Thank you. -Glen
Here are the results of the Get-ReceiveConnector PS script:
Identity
Bindings Enabled
MBX1\Default MBX1 {0.0.0.0:25}
True
MBX1\Client Proxy MBX1 {10.1.255.26:25, 0.0.0.0:465} True
MAIL1\Default Frontend MAIL1 {0.0.0.0:25}
True
MAIL1\Outbound Proxy Frontend MAIL1 {0.0.0.0:717} True
MAIL1\Client Frontend MAIL1 {0.0.0.0:587}
True
Here are snippets of the failure results:
The values that you specified for the bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MBX1\Client Proxy MBX1". A receive connector must have a unique combination of a local IP address & port bindings
and remote IP address ranges. Change at lease one of these settings.
The values that you specified for the bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MBX1\Default MBX1". A receive connector must have a unique combination of a local IP address & port bindings and remote
IP address ranges. Change at lease one of these settings.

Here's the full output from the failure messages:
Error:
The following error was generated when "$error.Clear();
$connectors = Get-ReceiveConnector -Server $RoleFqdnOrName;
foreach($connector in $connectors) { if($connector.MaxLocalHopCount -gt 1) { Set-ReceiveConnector -Identity $connector.Identity -MaxLocalHopCount 5 } };
" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.ConnectorMappingConflictException: The values that you specified for the Bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MBX1\Client Proxy MBX1". A Receive
connector must have a unique combination of a local IP address & port bindings and remote IP address ranges. Change at least one of these values.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.SetReceiveConnector.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Error:
The following error was generated when "$error.Clear();
$connectors = Get-ReceiveConnector -Server $RoleFqdnOrName;
foreach($connector in $connectors) { if($connector.MaxLocalHopCount -gt 1) { Set-ReceiveConnector -Identity $connector.Identity -MaxLocalHopCount 5 } };
" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.ConnectorMappingConflictException: The values that you specified for the Bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MBX1\Default MBX1". A Receive
connector must have a unique combination of a local IP address & port bindings and remote IP address ranges. Change at least one of these values.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.SystemConfigurationTasks.SetReceiveConnector.InternalValidate()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

Trying to reinstall CS5.5 Master Collection from DVD media on Windows 7 64 bit - setup.exe fails due to msxml3.dll error PDApp message [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154

If anyone is able to solve this they are a genius (or I am doing something very stupid!)
I am trying to reinstall CS5.5 Master Collection from DVD media on Windows 7 64 bit PC but setup.exe fails due to a msxml3.dll error.
Following a big bundle of recent Windows 7 updates, I started getting 'bad image' msxml3.dll error messages when opening any CS5.5 master collection program (Eg Premiere / Photoshop / Illustrator / Dreamweaver). Following advice on some threads here I tried uninstalling and then using the Adobe CC Cleaner Tool to clean up install, then reinstalling from my original DVD media.
Whenever I try using run setup.exe from installtion disc 1 the installing fails due to 'Missing files'. I have also tried dowloading trial versions and runing setup.exe fro mthe downloaded files but i still get the same message.
I have searched the forum and others have experienced this error but none of the solutions I have found seem to be working for me - as many seem to relate to download installations whereas I am installing from original DVD media (which worked fine before on the same PC)
These are the FATAL messages from the PDApp log
12/11/2014 15:29:27 [FATAL] PIM - Failed to Create XML instance : DOMDocument40 ADXML::initWithXMLPath Error:80040154
12/11/2014 15:29:27 [FATAL] Setup - Could not initialize ADXML object
12/11/2014 15:29:27 [FATAL] Setup - Unable to initialize. Error parsing setup.xml file
The PDApp troubleshooting seems to indicate that this is caused by error in downloads but I am getting it with both original media DVD and downloads.
I have also tried using my logon (which has admin privileges) and under our main admin account - and I get the same errors.
Is a clean install of Windows 7 + CS5.5 my only option?
Any help / info / advice / solutions very much appreciated! I have spent the last 2 days trying to sort this out and seem to be getting nowhere.
Thanks.

Thanks for the reply kglad - much appreciated.
I have already tried that option (along with downloading files) as it was one of the solutions mentioned on other threads, but that also failed.
Any other ideas?

Lync server call failed due to network issues

hi,
i receive an error while making a lync call to an internal user
"call failed due to network issues"
i have two ip's installed on My NIC but when i remove one ip of the ip's from
my nic, everything seems to work fine.
Kindly help

Hello Matt,
Hope you keeping well..!!
We are communicating with external customers lync server through federation option setup on our corporate lync server. We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
that we were able to browse the customer contact through corporate lync account.
We were also able to chat with external customer but however voice/video functionality are not working through same session. Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync. Could you pl help or guide with the way.
Thanks

ERROR: Execution failed due to binary missing or permission issues

I have a little problem with OEM. I've setup the LDAP authentication on my Linux RAC nodes and when I run a OS command without sudo, the date command works. I've setup my sudoers so my regular LDAP account can execute any command as oracle, but when I run the same OS command with sudo to oracle, the job comes back with:
Error Log
ERROR: Execution failed due to binary missing or permission issues
Has anyone else seen this problem?
Thanks,
Arwin

Looks like someone had some fat fingers when typing in the emcli commands to tell OEM where the sudo binary lives. I which the errors that OEM spit out are more meaningful, such as if it is going to tell me that a binary or permission is not there or set, what was it looking at?

Call failed due to network issues

call failed due to network issues lync 2010 client. even when i'm trying to do a test call from my system, same error comes.

Please, share more details on error from logs. Also check firewall ports.
The Media Relay Authentication Service (MRAS) is responsible for notifying the Lync client of the STUN and TURN IP address for ICE. This service
run on UDP port 3478.
To check that the UDP port is open on the firewall between the Internal Lync clients and the Edge server running this service you can use the Microsoft tool PortQry
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

RMAN restore fails due to space issue

Hi,
My database size is 225 GB . I m restoring the backupfiles using RMAN from production backup to the test instance.During restore process rman failed due to space issue.When the error occurred rman restored around 122 GB.
Now i increased the free space in server.So now my doubt is i have to delete the restored files (122GB) and start the restore process again or RMAN will automatically skip the the restored file and resume the process from where it was failed ?
DB Version -11.2.0.2
RMAN error
channel CH2: ORA-19870: error while restoring backup piece /ebs/DEV/backup/GOLD_db_t801111628_s10788_p1.rman
ORA-19502: write error on file "/ebs/DEV/bin/db/apps_st/data/a_txn_data11.dbf", block number 3492608 (block size=8192)
ORA-27072: File I/O error
Linux-x86_64 Error: 28: No space left on device
Additional information: 4
Additional information: 3492608
Additional information: -1
Thanks

When you start the restore from the failure, RMAN knows whcih are restored and it will check file headers. if the headers match, it will skip restoring the files.
Hope this helps,
Regards,
http://www.oracleracexpert.com
RMAN Debug and Trace
http://www.oracleracexpert.com/2012/11/rman-debug-and-trace.html
Time for Change: Migrate your Non-RAC Database to RAC
http://www.oracleracexpert.com/2012/10/time-for-change-migrate-your-non-rac.html

"Wireless association failed due to unknown reason"

I am running Vista home (manufacture installed on new laptop) and am trying to connect to internet through new router WRT150N. The network is created fine (my other laptop can access it) excellent signal etc, but I keep getting the message "Wireless association failed due to unknown reason". I have tried every different security setting including no security at all and still cannot connect. I am, however, able to connect to the router with a wired connection. I would prefer to not have to chuck this thing out the window but it is becoming increasingly likely.
Thanks for your help.

hi there;
considering the scenario you've got on your network, that there are other wireless pc connecting to the router, then there is nothing wrong with the router itself. all the settings on it maybe correct. just to isolate the problem try to contact microsoft so as to clarify with them on securities and wireless settings of the vista laptop you've got there, so as you won't get frustrated thinking about your immediate problem.
i have a friend who uses the same brand and model # as yourself, and he does not have any issues with his win vista connecting to the router.
give microsoft a call, just to clarify things.
thanks.

Weblogic invoking web service failed due to socket timeout

Hi,
I encountered an error when I invoke web service from OBIEE 11g. The web serivce resides on Websphere running on other machine.
An error says that "Invoking web service failed due to socket timeout." and it seems that it stopped in just 40 secs.
Is there any settings of WebLogic server to avoid this? This web service normally runs for more than 60 sec.
I have checked several parameters by WebLogic admin console and changed those values, but I still receive same errors.
Regards,
Fujio Sonehara

Hey Eason,
As I had previously mentioned, I have checked the FE server certs and have mentioned the signing algorithm it used to sign the certs, which was sha1DSA and not sha1RSA, I even checked my CA list of issued certs and have found all certs are signed the same.
Signature algorithm: sha1DSA
Signature Hash Algorithm: sha1
Public Key: RSA (1024 bit)
I could run request and reinstall all day long it will still get the same certs signed with the algo..
Doing some research I attempted to see if I could change the signing cert for a specific cert template that was being used to issue the Lync FE certs... however seems that from according to
this, that I'd have to completely rebuild my CA before I'd be able to request and issue a cert with the proper signing algorithm?!
This
says its possible but not supported, what do I do in this situation? Is my only option to rebuild teh entire CA and cert infrastructure?
I noticed my CSP is set to Microsoft Base DSS Cryptographic Provider, and under the CSP folder there is no "CNGHashAlgorithm" key so I'm using a "Next Gen CSP" apparently? Is this CSP good enough to support Lync...Straight up where is
the Lync documentation on the CA setup requirements??
This google link doesn't tell you how you should setup a CA for Lync, what settings need to set etc..

Failed due to following error: 800800005

Hi All,
I has been trying to add member in the dimension library. But when i click on "Manage dimension member", one excel pop-up comes with the following error "Retrieving the COM class factory for component with CLSID {0024500-*****) failed due ti the following error: 800800005. I have already done appropriate DCOM setting on my local machine. If you feel that something i could missed out,please let me know.
I really appreciate your valuable input or any quaint idea.
Thanks
Vikram singh

Hi Vikram,
I would suggest you to 'Detect and Repair Excel or reinstall supported Excel version or reinstall and Repair Microsoft .NET Framework 2.0.'
Also you can implement the SAP Note: 1266994. Here are the excerpts:
Since the installation was on 64 bit machine, we switched IIS Application pools to run under 32 bit mode by running the following command:
CSCRIPT C:\Inetpub\AdminScripts\adsutil.vbs SET W3SVC/AppPools/Enable32bitAppOnWin64 1
We also disabled .NET 2.0 (64 bit) and enabled .NET 2.0 (32 bit) by running these commands under 64 bit and 32 directories for .NET 64 but and 32 but respectively.
aspnet_regiis -u
aspnet_regiis -i
Finally, added aspnet_filter.dll to the ISAPI filters section of IIS and enabled .NET 2.0 under web server extensions.
Restarted IIS and tested .NET Infoview successfully.
You can also implement 1397986 SAP Note.
Hope this resolves your issue.
Rgds,
Poonam

GetAndPublish web service failed due to an internal error

Hello all,
Been a little while, To start off we have no IP phones connected to Lync. We have a completely separate PBX and VoIP system.
We have one FE server internally used to have internal users use Lync 2013 as a IM interface and Video conference. All users are running Lync 2013 with all the latest updates. Our Lync 2013 FE server is running on Windows 2008 R2 with all the latest updates.
v I noticed in our event log the follow error v
GetAndPublish web service failed due to an internal error. Request Details - Entity: [[email protected]], Device Id: [9A1A1E15-865F-5376-88CD-4384205012F9], Authenticated User: [sip:[email protected]]. Additional Context: [CA_Failure: InternalError] Cause:
This is an unexpected failure Resolution: Re-start the web server. If you see this error continuously, examine the server traces and contact product support.
I have googled and only came across technet forums that state checking certificate related issues.. or based around the IP Phones not authenticating. such as
here, however this guy noted a certain algorithm required by the CA to work properly "RSASSA-PSS algorythm instead of RSAsha1". Now I'm not exactly sure how to check up on this, and I also don't get why everything seems to work fine but I keep
getting these events populating.
I also ran "Test-csclientauth" cmdlet on our FE server and came up with a failure much like on the link I provided above.
Am I to assume these events are being populated because my Lync deployment was set up to use certs techincally not supported by Lync?

Hey Eason,
As I had previously mentioned, I have checked the FE server certs and have mentioned the signing algorithm it used to sign the certs, which was sha1DSA and not sha1RSA, I even checked my CA list of issued certs and have found all certs are signed the same.
Signature algorithm: sha1DSA
Signature Hash Algorithm: sha1
Public Key: RSA (1024 bit)
I could run request and reinstall all day long it will still get the same certs signed with the algo..
Doing some research I attempted to see if I could change the signing cert for a specific cert template that was being used to issue the Lync FE certs... however seems that from according to
this, that I'd have to completely rebuild my CA before I'd be able to request and issue a cert with the proper signing algorithm?!
This
says its possible but not supported, what do I do in this situation? Is my only option to rebuild teh entire CA and cert infrastructure?
I noticed my CSP is set to Microsoft Base DSS Cryptographic Provider, and under the CSP folder there is no "CNGHashAlgorithm" key so I'm using a "Next Gen CSP" apparently? Is this CSP good enough to support Lync...Straight up where is
the Lync documentation on the CA setup requirements??
This google link doesn't tell you how you should setup a CA for Lync, what settings need to set etc..

Error: Windows Vista failed to start. A recent hardware or software change might be the cause

PLEASE HELP!
My Lenovo SL500 is not working at all - I get error: "Windows Vista failed to start. A recent hardware or software change might be the cause"
I tried the following on my Lenovo:
Windows repair menu = "windows cannot be repaired"
Lenovo Rescue and Repair
Rescued my files from Hard-drive (copied to external hdd)
Restore System = Failed
Diagnose hardware = HDD passes all tests
Don't know what else to do with = Boot from another device ? Access BIOS?
Because I do not have the windows vista install disks
I purchased and downloaded the recovery disks from neosmart.net
The neosmart windows vista recovery disks DO NOT WORK = Error is "Unable to find any valid Windows partitions on this computer".
The Hard-drive exists because I was able to back-up files from HD through (Lenovo Rescue & Recovery Rescue files). So there is a hard-drive.
I don't know what to do next?
Last resort is to Factory Restore via either the Lenovo R&R or Windows Vista Recovery Disks (neosmart)?
Will I still have windows?
PLEASE HELP!

Hi, Josemne
Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

My Itunes will not communicate with either of my ipods. I have unistalled all Apple products from my computer. Completely reinstalled Itunes, however still it keeps telling me to reinstall Itunes to correct the software issue. Please help me!

Please help me. I have an Ipod Shuffle and Ipod Nano both the latest versions. I can not get them to communicate with my ITunes. I have tried the troubleshooting and I have tried completely taking all Apple software off my computer and reinstalling Itunes. I could really use someones help. My ITunes keeps telling me reinstall Itunes to correct a software problem, but I have reinstalled it three times and the issue has not been corrected.
Thanks a bunch in advanced!

I cannot find "Other" devices. I found Apple Mobile Device under Universal Bus Controllers but cannot see "recovery mode" or any other status. I use Windows Vista.
When I try to restart Apple Mobile Device Service I get the following message: "The Apple Mobile Device Service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs". What does this mean?
During the last 48 hours I was able to see my iPad in iTunes only one time during many attemnpts to connect . I haven't been able to see it during the llast several attempts.
Any suggestions? The standard suggestions have not worked: i.e. stop then start AMDS; tuurn off iPad and PC, then restart both and reconfrom iPad to PC; reload iTunes.

Backup to remote stage failed due to RFC error

Hello!
Recently I have problem to execute a successful online Backup to the external source.
If I start backup from DB13 and analyse the work processes (Tcode SM50) I found the following:
The responsible BGD-WP:
status: On hold , reason: RFC, report: SAPLSSXP
The dev_w8 trace retrieves the following error:
Source RSCROSS10 Line 112.
Error Code DBIF_RSQL_SQL_ERROR.
Module $Id: //bas/700_REL/src/krn/runt/absapsql.c#6 $ SAP.
Function HandleRsqlErrors Line 761.
The DB13-protocol retrieves the following information:
BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3':
Connected to 192.168.200.3 Port 21.
220-FTP server ready. 220 This is a private system - No anonymous login 331 User sapbackup OK. Password required 230-User sapbackup has group access to: administrator 230-This server supports FXP transfers 230-OK. Current restricted directory is / 230-************************************************ 230-* Use SITE command to change client codepage: * 230-* ie, site codepage [client codepage] * 230 ************************************************ 200 TYPE is now 8-bit binary 200 PORT command successful 150 Connecting to port 2734 NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-20 03.08.23
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 to/from /sap/DEVB/bdwkhbgq/SR3.DATA3 failed due to previous errors.
Can some one help me with this issue?
Thank you very much!
regards
Thom

Hello Eric,
unfortunately it is not possible to do it, because I have only remote access to the SAP system.
Is it possible to analyse the problem with the log files?
If yes --> which logs should I post here?
I went through the monitors in RZ20 and found a lot of errors/warning:
Database:
DBIF_SETG_SQL_ERROR
ORA-03106: fatal two-task communication protocol error
DB error 24909 in FET
SQL error 3106: WP in reconnect status
Background:
Job SAP_COLLECT_FOR_PERMONITOR terminated
Utilisation:
100% > 95% Background work process load exceeds threshold
BackgroundService: SystemWideFree BPWP: 1 WPs > 2 WPs Current value over threshold value.
Abap ErrorInUpdate
Syslog : BasisSystem
Operating system call recv failed (error no. & >E5)
The log file dev_cp retrieves the following information after execution of DB Check:
Trace file of control program (trace level 3)
< Function: BtcTrcInit> Function: main SAPXPG 700
2007-10-23--14-42-27 : Before BtcXpgDetach
> Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
2007-10-23--14-42-27 : Before RfcAccept
2007-10-23--14-42-27 : RfcAccept returned OK
security check switched OFF
Install RFC call SAPXPG_START_XPG
Install RFC call SAPXPG_START_XPG_LONG
Install RFC call SAPXPG_END_XPG
Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
2007-10-23--14-42-27 : Before first call of RFCDispatch
> Function: BtcXpgStartXpgLong
2007-10-23--14-42-27 : Beginning of BtcXpgStartXpgLong
> Function: BtcXpgStartXpgImportLong > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam
Line Text
<No StdOut/StdErr output reported>
Target log table is not identical to source
ItGetLine terminated with NULL
<Function: BtcXpgItTransfer > Function: BtcTrcReset < Function: BtcTrcReset Call mode: VIA RF
Input arguments of BtcXpgStartXpg:
My WP settings are:
rdsip/wp_no_dia = 6
rdsip/wp_no_btc = 3
rdsip/wp_no_vb = 1
rdsip/wp_no_vb2 = 1
rdsip/wp_no_spo = 1
Thank you!
Thom

CS2 reinstall on Vista fails due ID issues

Similar Messages

Maybe you are looking for