CS3 2nd install will not work;

Summary
Successfully installed 1 components(s):
Shared Components
Errors: 2 Components:
XX Adobe Photoshop CS3
Component install failed
XX Shared Components
Component install failed

I uninstall all adobe software
trayed ccleaner traed registry repair
But just I can not install to make licensing or whatever ....

Similar Messages

Elements 10 install will not work from CD

1st install was not complete-would not work. Uninstalled completely, even regedit.-no trace left. rebooted of course. but it will not install. it wants to uninstall non-existing elements 10.
what to do?

Any chance that you backed up your registry prior to manually editing it? If so please do so.
You can also try running the CS Cleaner tool to attempt to detect any remaining registry entries and try to remove them. You can find details regarding the use of the CS Cleaner tool at CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

CS4 Install not working. Laptop crashed. New download link sent yesterday. Downloaded, but install will not work on new laptop. Help?

Laptop crashing. Purchased new. Had 30 day free trial of CS4. Activated and used that.
My serial # would not work when prompted for it.
Yesterday, chat session helped me to download the software again. Download took 3 hours so chat session ended before install could be completed.
Today I rand the install.
The first time the session ended with a "failed to install" and a list of programs (all of them).
Second and subsequent attempts result in getting to the "Cancel/Install" screen. Message says "Preparing to install" but nothing happens for a significant amount of time.
Please advise. How do I complete the install? I do need to use this software very, very soon.
Thank you!

DAnderson which operating system are you using on this laptop? Did you transfer/migrate/copy over your files, folders, and applications to this new computer?

My ipod 2nd generation will not work because I forget my passcode

I am trying to wipe my ipod

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
If yoo want to wipe the iPod, just restore to factory settings/new iPod.
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

User preferences will not save on windows xp. clean install will not work.

User options will not save. I have followed all the instructions to do a clean install which included removing the old firefox files and user profiles. I am using Windows xp SP3. The only thing I have not edited is the registry information for firefox. I can not get the options to save correctly. Please help.

Which security software (firewall, anti-virus) do you have?
Some security software has virtualization or sandbox features that may cause problems by protecting and restoring files in the Firefox profile folder.
Is there a prefs.js file created with the correct date/time stamp?
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Try to rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

Adobe Photoshop CS3 Extended installed but not working

Adobe Photoshop CS3 Extended was added to my computer when I bought it in Thailand.
Now (I am no longer in Thailand) I want to use it but I can't seem to open/do anything.
Even when asking for help with the 'Help' button it states that "There was an error in initializing the Adobe Help application. You may need to re-install the applicaiton and the Help componen".
How do I do this? Or am I missing something?
Thanks in advance for the help!
Eline

Haha... I like the honesty!
I was in bad need for a computer and went to one of those fancy, big shopping malls recommended to me by a couple of friends. I didn't even know I had Adobe Photoshop until today. I am not sure I really got screwed or things just work differently. The computer is a little strange... (I can write in Thai สกร่ฟส กส่ฟกส า่ฟส ่ if I would like to) but so far it's ben okay.
Anyways, what would you suggest I do Mylenium?

How do I uninstall firefox6? The version I installed will not work on my Mac OS and is taking up valuable space. Also replaced an earlier version that probably worked. (Cable company guy convinced me to install it.)

ditto

As of Firefox 4.0 and newer one needs both OSX 10.5+ and a Intel Mac.
As you are using a Intel Mac with OSX 10.4.11 the last version to work will be Firefox 3.6
The current version Firefox 3.6.20 can be found at http://www.mozilla.com/en-US/firefox/all-older.html
https://support.mozilla.com/en-US/kb/Uninstalling+Firefox
https://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac

The latest update (9/2/11) for iPod 2nd Gen will not work

This is getting frustrating, I can't downlaod any apps and its moved like 1% in a hour

The last update for 2nd gen ipod touch is 4.2.1 and was released in nove of 2010.
Is this the update to which you refer?

After install of ios7 on ipad mini wifi will not work

I have installed ios7 on my mini. After doin so WiFi will not work. Button is greyed out. When I try to erase all content and go back to factory it wants my password and won't do so because it says no internet connection. Had I know this was going to happen I would have left well enough alone. I have tried hard resetting by holding home and off button simultaneously but not working. Anyone have any ideas? This mini is now basically useless to me without internet. I'm really annoyed.

Hello Andy,
1st guess would be an incompatible extension from the previous OS, 2nd would be a reinstall of the OS is needed, but...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

I was using Lightroom v5.6 when a notice came up to update to v5.7. I did the down load but must have gotten a bad down load because it will not install. And the old 5.6 on my desktop will not work. So no 5.6 or 5.7 . any ideas how to get something

I was using Lightroom v5.6 when a notice came up to update to v5.7. So I did the download but it would not work or install. And the 5.6 version will not work now either. So I am screwed - no 5.6 or 5.7 and no access to Adobe Tech. Any help will be appreciated.

My iPod is a click wheel...I think that's fifth generation?
I've always used my firewire cable to update my iPod. I've tried using USB in the past but for some reason it always says that my iPod has low battery and won't let me update it, so I just use firewire. Can I not use firewire with itunes 7?
I'll try using the USB again. It's laying around here somewhere. Just gotta find it.

ITunes will not work on Fresh INstall of Vista x64 SP1

I have a strange issue. I have a Windows Vista x64 with SP1 (Yes the DVD is a production DVD from Microsoft not a slip stream copy.) and I wanted to do a fresh install of Vista with SP1. Reinstalled OS and everything is running great but iTunes. When I start iTunes I get this error message about "mssip32.dll" being damaged or corrupt please reinstall the app. So I looked around good old Google and apple.com. I found several fixes about re-registering a set of dll files. So did them all, no change. Reinstalled Vista from scratch again, no change. So for the heck of it I reinstalled Vista with no SP1 installed and then applied SP1 and it works fine. I reinstalled Vista with SP1 and have been running it for over a week and everything on the system is tested and solid as a rock with no issues. The only program that will not work is iTunes. I have also tried all the way back to version 7.4 and no luck.
Any ideas on this?

Read this scary microsoft support article on windows updates?

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum

My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!

mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS

Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
Thank you
Guy Deschenes
Shawinigan (QC) Canada

Hi Eric,
Here's how a similar problem was resolved between PS and BR.
The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
Please try the installation, and let me know whether it works. Thanks!
It woks just fine since I unistalled and reinstalled PS 2014.
Guy
Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
created by ericboerner in Bridge General Discussion - View the full discussion
I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

CS3 2nd install will not work;

Similar Messages

Maybe you are looking for