CS3 and OSX 10.6

Hi, I updated my macbook to 10.6. Since this time my CS3 is not working. I can install but after that comes only an errormessage. What can I do to work with CS3 in OSX10.6

What does the error message says exactly? What exact model of Mac Book? Machine specs?
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

Anyone using CS3 and Epson 1280?

I'm sure this may end up being an OSX issue but is it just that hard these days centering an image on the 1280?
CS3 and OSX up to dat plus supposedly latest Epson driver.
thanks

I have Leopard correct.
I do have the 1280 selected in both setup & print and I'm using 4x6 where in this instance I'm printing and image that is 3.75x XX so there's a border.
Also it seems I can no longer see an option to select 1280 border-less when once I could in the days of 10.4.
I downloaded the 1270 driver from the UK sire but will try it tomorrow. They didn't list a 1280, just a 1270 & 1290.
I'll post my results soon. and I will try the "minimize margins" too.
Thanks for all your help so far.

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
tracking down the cause of the flakiness can be tricky ... as you already know ...
just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

OSX + Epson 2200 + CS3 and LR2 - help!

Please help.
I just moved to a Mac Book Pro running Mac OS X 10.5.4 (9E17) and the latest CS3 and LR2. I have used an Epson 2200 successfully for years on my previous Windows machine. I have a color managed system. Now I have several issues on the Mac. Any suggestions will be greatly appreciated.
My issues:
1) I see all of my profiles (icc files) in the CS3 Print screen but none are listed in the Epson printer setup screen. Why?
2) My prints are awful; very magenta and with banding. Something fundamental is set incorrectly. What could it be?
3) I read about Epson Easy Print but I still have to go into the Epson Printer setup screen from the CS3 or LR2 print screen to, for example, turn off color management. Why?
4) In LR2 when I go to the Epson Print setup screen and try to select Print Setting or Color Management, they are lined-through and I receive this message: "The bundle Color Management could not be loaded because it does not contain a version for the current architecture". Any ideas on this?
Thanks in advance for your help.
Dave

Thanks. I already did all of that. A couple of times.
Checking all the sites it looks like there is confusion about what driver I should be using. I did get the latest one from the Epson site. I am confident it is the correct one. But then I read on both the Epson and Apple sites that the OS already has the latest version and not to install another one. So I wacked them all and let the OS do it. Then it installed the Gutenprint driver. And that didn't fix the issue either.
I need to read more about the Open-source printer drivers (CUPS, Gimp-Print, Easy Software Products)that seem to come with OSX.

I own a copy of CS3 and I need to reinstall: Can I download this version direct to OSX?

Hi there,
I own a copy of CS3 and I need to reinstall onto an old MacBook. I purchased the Suite in 2008 and have been happily using it for years without issue. However I had to reinstall the entire operating system and this has fried my optical drive, so I cannot remount the software via disks. Is it possible to download this version direct to OSX? As I say, my Optical Drive has died and the Mac is VERY old, but a direct download would work...
Does Abode provide this service?
Many thanks and Happy New Year!
RWM

Hi there and thanks for the reply... I used the link and start to download the two large files but get this instead:
HTTP ERROR: 404 /support/downloads/dlm/main.jsp
Any other advice?
Many thanks...

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

Flash CS3 and Snow Leopard

Hi, i am experiencing a strange and unpleasant situation.
I am using CS3 and upgraded to Snow Leopard 10.6.2 last night, along downloading the latest Flash Player for browsers.
Problem is that now all of my text block arent displaying the same line height that before i updated?????
I compared the same exact SWF made under Tiger and those made under Snow Leopard and the two arent identical, lines are misaligned regarding line height!
What gives? Flash or OSX interpreting fonts differently?
Thanks!

I dont know whats up with this... but all of a sudden today, in my flash cs4 (mac and PC versions) When i go to open a fla in flash to work on it, i select a text box... in the properties window under position and size --- HIEGHT-(selection hieght) value is grayed out... I opened fla's that i had don before but this also now affects them as well. I tried opening on my PC .. now it does the same thing. Every file i open now.. when i got to the properties of a text box ... the height values are grayed out. I am using Palatino roman font... in a simple text box.
Position and size:
x:20 y:15
w:264 H:335.2 <-------- grayed out!!!
I have opened these files in cs3... and that now is also experiencing this......
PLEASE HELP... Im in the middle of a project --- with extreme deadlines...
PLEASE PLEASE PLEASE
my post....
saw yours.. wondering if this is related.. Im running Snow Leopard now to.. just started. Then the Height variable became grayed out. In your properties windows, are you experiencing the same??
It's killing me...Im an animator that does books... I am unable to adjust this value, and when i sent the fla to someone else... they say they see everything fine, but when i view it.. the Text spacing in multiline text box is different than discribed back to me... My line height is much larger than what he is seeing.
Please let me know if you find anything.
Regards
Phantom Lady

Photoshop CS3 and ATI Radeon 2600XT Graphics ERRORS

I am Running photoshop CS3 on a mac pro 2.8GHz 8-core with and ATI Radeon 2600XT graphics card. On any size file, from a small jpeg to an enormous tif, any time I pan around the image, the monitor will repeat a section of the image over and over to fill the screen. That is to say, panning vertically will fill the screen with copies of a random horizontal section of the image (20pixels wide or so). The effect goes away as soon as I perform another action that affects the entire image (zoom, action undo, create new layer, etc.). I have updated photoshop and osx with all available software and firmware updates.
An example of what this looks like: http://www.flickr.com/photos/26107441@N02/2450960322/

I am running the same Mac hardware with a Mitsubishi 2060u, 1600x1200, 85Hz (CRT). I am having no such issues with PS CS3. I tried the monitor at 60Hz as well which also worked fine.
Do you have all the latest updates installed including the 2600 firmware update?
-Keith

CS3 and updates UNINSTALL

Hello,
Could someone either guide me through the process, or direct me to material that explains how to remove all traces of CS3 and any updates from OSX. My roblem with CS3 crashing since the second to last Adobe update is persiting and I would like to remove it all and reinstall CS3 in its original form, without those damned updates. Running the uninstall utility didn't work.
Thank you, and forgive a novice a stupid quesiton if this is one!
~ Peace
K :S

Kasia,
It will not necessarily get rid of what is causing the problem. It may
or may not be the updates that are causng the problem. It could be
something as simple as a corrupt preference file. There is a CS Cleanup
Script that you can run that should wipe out all traces of cs3.
Mike

Bridge CS3 and error message

On my old Windows XP with CS3, Bridge would often crash. No pattern I could see.
Recently bought a new Windows 7 PC with iCore 7 processor and installed same software. Had the same problem as above.
I also have just bought a new laptop running Windows 7 with a dual core processor. Loaded same software and also had the same problem.
The Photoshop CS3 (and Bridge) is as up to date as Adobe provide, so is Windows on all three machines. The common element in all three seems to be CS3, or at least, that's how it appears.
When it crashes on the two Windows 7 machines, it wants to send the following files to Microsoft. Haven't used the old XP machine for a while and don't have any notes of those messages.
All three files begin: C:\Users\John\AppData\Local\Temp\
and carry on:
WERB144.TMP.WERInternalMetadat.xml
WERE5BD.tmp.appcompat.txt
WERF632.tmp.mdmp
This is way above my knowledge. Can anyone help, please? What does it mean and could I fix it easily?
In the meantime, I'm doing the 30 day trial of LR2 which may be the best way to go. But I would like to know why Bridge is behaving as it is.
Thanks!
John Walmsley

Thanks, Curt.
I'll give this a try and report back. All three PCs are using the same BitDefender Total Internet Security software so that is definitely a common feature.
John Walmsley

Problems with FCP 5.1.4 and OSX 10.4.9

I upgraded to Tiger, installed the new FCP Studio and everything was working fantastic.
The next morning there was a software update for Tiger and FCP-5.1.4, it's been a nightmare ever since. When I restarted FCP would not recognize my Sony HDR FX1.
I had this problem once before with 4.5 and I fixed it by re-installing FCP and doing the upgrades, so that's what I did with 5 but this time there was a new problem. It wouldn't let me work on anything that I had opened since I did the software update, so I had to do the update again and then FCP wouldn't recognize my camcorder again on startup. If you pressed log and capture you could control the camera but no capture was possible.
So I re-set the easy set-up and presto! everything was fine and I worked productively for a few days.
But then I had to capture some SD from my Canon GL2 so I reset all the settings for DV NTSC and reset the easy set-up for DV NTSC but now FCP won't recognize my GL2 on start-up. If I click log and capture I can control the camera but no capture.
My next try to solve my problem was to downgrade back to my original 10.4.6 and FCP 5.1
That put be back to square one and everything works fine again except I am left with the problem that everything that I worked on after I did the update won't open, I get error 41.
Now I know this is because I am now trying to work on these projects with 5.1 after they were worked on in 5.1.4. But the problem is that everytime I update to 5.1.4 I can no longer capture or print to tape.
I tried the trashing the FCP prefs thing and the repairing permissions thing but I can't seem to solve the problem.
Has anyone else had any problems using FCP 5.1.4 and OSX 10.4.9?

Not sure how you tried to install 10.4.8 but if all
else fails you can always reinstall the original
operating system that came with your Mac using 'Erase
and Install' then upgrade it to 10.4.8 - probably in
stages.
Erase and install should be used as a last resort! A better option is to use the "archive and install" feature. It renames your old system folder and creates a new one for the OS you just re-installed. That way you don't have to reinstall everything, your user accounts and emails should all still be there, and if something doesn't work, you have your old system folder to pull things like preference files out of.
Eric

Mouse pointer Problem with CS3 and windows 7

Upgraded
to a new PC which has Windows 7(32bit) as an operating system. Installed my Photoshop CS3 and everything seems ok except when I magnify in the navagator panel. Once I zoom in my mouse pointer changes to 3 hands in the navigator panel. I powered up my old laptop which has Vista and my CS3
then matched up the mouse settings in the control panel on the new PC. Used the same usb mouse on both PC's, the older Vista laptop worked fine but the windows 7 PC would get a tripple pointer in the navigation panel when I magnified. In the windows 7 laptop I then set the compatibility for Photoshop CS3 to run in XP mode but the problem did not clear. I see in FAQ for CS4 people have complained about tripple cursers in windows 7 but the replies indicated that the recommended fix did not work. Any help apreciated.
Tom

Thanks for your solution. I by changing the setting to 125% I am now able to use CS3 without tripple pointers.
My eyesight is challenged so the decrease in text is a challenge but I can change the setting when I will use CS3 so I have a workarount.
Thanks,
Tom

Unable to Open Images in Bridge CS3 and Continuing Icon issues!

Re: Icon issues in Bridge CS3 and also with Photo Downloader that have never been there before.
So, these are the issues. Just one of the folders that previously would show thumbnails now only shows DNG icons, and none will open in Photoshop to let me work on previous image. Issue #2 - can't download images with Photo Downloaders - both my wife's Canon G9 only shows CR2 icons, and my Nikon D300 only shows NEF icons - neither of these issues had appeared before or been an issue. Third issue. None of my Bridge folders - even those with regular thumbnail immages- will open now - get a message that says words to the effect of Photoshop doesn't recognize this type of file. Computer is a Mac, with OS 10.5.8
I recently tried to make more room on HD, so must have taken some critical files/commands out by accident.
Thanks for your time and previous suggestions - still not working. I'm sure that in trying to correct things have made things even worse- as may be noticed by the two snapshots I've attached. The first is one from a library from my user section. The second library image is from my hard drive. Hopefully you and others aren't laughing or crying too much over what you see - redundantcy, etc! All of my energies have focused on taking photos, obviously none to proper setup/use of organizing things on my Mac. But after the laughing has stopped, any help will be tremendously appreciated - am most anxious to getting back to working with and saving images.
"user image"
Hard Drive image:
Thanks in advance

First of all, if you don't know much about how applications work inside of the OS, its wise to not look in the application folder(s). Deleting anything here can make your apps go haywire. If this happened, then you are best to 1)unregister photoshop, 2) uninstall your entire suite. 3) reinstall the suite and finally 4) reregister photoshop.
All images/textures/photo's including dng, cr2 and nef files need to be stored in your pictures folder and no where else, unless you're an intermediate user on your OS. In your pictures folder you can create folders for organizing the pictures whether by location, season's, time, or file format.
Then when you back up you can just drag a copy of the files to another drive including cd's or dvd's.
This will make sure you don't accidently delete important app files.
All this said, my OS of choice is Windows, so if anything does not sound right, thats why.
Hopefully this helps...

CS4, reverting to CS3 (and getting a refund!) but still interested in opinions

I've just spent the last 24 hours trying to muscle my way through the myriad of problems I'm finding with CS4. I've managed to alleviate some, but still can't produce my end video.
To start off, I'm running on Windows Vista. All the problems seem to centre around Media Encoder (although I didn't get far enough to play with Encore or On Location).
Initial problems where to do with installation. If CS3 is removed after CS4 is installed the link to Media Encoder fails, you then have to removed CS4 and reinstall. Uninstall doesn't work correctly or completely, it leaves a fair amount of files behind that have to be manually removed, failure to do so resulst in Error 2 on reinstall (I'm guessing because the install tries to create some of the working directories, and fails because they are already there?).
After reinstallation, the job appeared correctly in Medie Encoder when it was fired up from Export in PP, and it was also now possible to add files to Encoder directly. I tried a test run of my project with the following settings:
H264
Width : 1280
Height : 720
fps : 25
Field order : Progressive
Quality : 4.0 and 5.1 (tried to runs)
Bit rate : can't remember, but atleast 12M for target and perhaps 30M for max?
VBR 2 pass
Sound : AAC
The end video was incredibly jerky.
I tried a second time using the following settings:
Quicktime
Codec : H264
Quality : 100
Width : 1280
Height : 720
fps : 25
Field Order : progressive
Pixel Aspect : square
Use maximum bit depth ticked
Bit rate : 1k (I tried to move this to 5k however it kept reverting back)
Sound : AAC
Export from PP initially failed, the job appeared in the queue, however nothing actually happened, it just sat there. I read on another post that updating Quicktime to 7.5.5 fixes that (does PP rely on Quicktime for the codec?), tried and the job then started.
Upon completion, the video played smoothly, although quality was low (low bit rate?). However the video to audio sychronisation was completely out. 30 seconds of play, and the sound was around a second behind the video.
I then tried applying all of the updates. As with other people, the Encoder portion failed initially (even though I started the update process from Encoder), but then succeeded the second time.
Upon completion of the updates, the problem reverted back to the initial, i.e. the job started OK, but didn't actually do anything.
The render settings I'm using are required by the web site I'm trying to create this video for, and also worked without issue in CS3.
It would seem to me that the Media Encoder portion in CS4, on the Windows version atleast, is seriously flawed (and no, I'm not going to buy a MAC ;-)).
I would like some answers to these problems, despite all the issues, I did like the overall look and feel of the product compared to CS3, and I also now need the AVCHD support.
Forgive any innacuracies in the phrases used, settings etc, CS4 has been removed from my system for now, so it was all from memory.

Stuart,
Maybe I'm just too old and have seen too many "revolutions," to get onto that wagon.
However, the more I follow CS4 threads, the more I am starting to question whether I will upgrade from CS2, or not. Some things look useful to me (more than with CS3), but then there are the problems.
Adobe IS listening, as evidenced by a few of the folk on the team dropping by to give info on updates, etc. Having some major "fixes" so soon upon release, indicates to me, that they are working on it.
I didn't move to CS3 for similar reasons. Also, it really did not offer ME much in the way of useful features.
Whether it's through bug reports, posts in the forum or direct correspondence with Adobe, the best way to get their attention, and provide them with useful data, is to offer as much detail on the specific problem(s) as one can and demonstrate repeatability. General posturing might make one feel better, but does little to get improvements in the program.
As you state, some of the problems are probably OE. Some are system specific, and others are related to 3rd party software. Still, there do seem to be a lot of issues that ARE CS4-specific. These worry me. These are the issues that I would like to see Adobe address. So far, they seem to be, albeit maybe not quickly and efficiently enough for many users. CS4 does seem to be more of a "work in progress," than I am willing to take on just yet, especially as it would also likely mean a new workstation and new OS (one that is not without some problems of its own and a new learning curve also).
I'm fortunate enough to have CS2 and a rock-solid group of systems to use it on. It does 95% of what I'd like for it to do, and that extra 5% has yet to intice me, especially with the "problems" that I've been reading about.
As for the Adobe faces in the forum, they have shown up, when they could actually tell us something. I view that as a very positive sign. Even when they have dropped in, too many people demand to know "WHEN?" something will be fixed. If they knew, they'd tell us.
I'm sorry that CS4 has not gone more smoothly, upon release. It saddens me greatly. However, it is also why I will be waiting and keep reading. For me, this will be an upgrade that will be very expensive, because it's not just the software. I hope that Adobe does get it all running and running smoothly.
I would anticipate, and hope, that the next update fixes most of the issues. I anticipate, and hope, that Adobe will provide us with the same sort of info on it, as they have done with 4.0.1 & AME's update. I also hope that the forum subscribers will concentrate on the info provided and cease with the "WHEN?" The Adobe posters do not know yet, as the coders are still working on it. It *seems* that rushing to meet a product release date might have gotten us into this trouble to begin with.
My fingers are all crossed. Maybe 4.0.2 will signal that it's time for me to make the jump.
Hunt

How to open animated .GIF files in Photoshop CS3 and newer

Q: Since ImageReady is long gone from Photoshop, how can I open animated GIF files in Photoshop CS3 and newer?
A: File -> import-> video to layers.
In the dialogue box type "*.*" to show all file types.
Select your GIF file and which frames to import.
They will now be available in your animation palette.

Zeno
curt y, sorry for the late reply, I tried that but I doesn't work. I have to choose at least two files in the Load Layers window in order for the OK button to be available and then some action script uses the different files to make layers and merges them but not from the frames of the gif file. I can undo through the script to see what it did but it never accessed the frames of the gif file, just the first frame. Choosing "make frames from layers" in the animation palette only puts the original files into layers - that is only the first frame of the gif file.
I guess I'm out of luck with the 64 bit version of Photoshop as Zeno suggested :-(
What program would you people suggest for opening each frame from gif files?

CS3 and OSX 10.6

Similar Messages

Maybe you are looking for