CS3 and PowerPC Mac - can't get Photoshop CS3 to install
I'm using a PowerPC based Mac - OSX v 10.4.11. I tried to install the CS3 suite - some apps installed fine, some did not. Photoshop CS3 did not install. Now when I try to use PS CS2 quite a few features are missing, particularly in the filters menu. Has anyone seen this? Please help!
Thanks
You almost certainly will have to remove CS3 from your System before you can re-install CS2. After you have installed CS2, you can then re-install CS3 in addition.
Use the Adobe Uninstaller and run the CleanScript as well for good measure.
http://www.adobe.com/support/contact/cs3clean.html
Then repair permissions both before and again after installing the software.
This Tech Note could be useful:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb400607&sliceId=2
Good luck.
Similar Messages
-
One of our computers crashed and we had to replace the hard drive. Now we can't get Photoshop to open. Since the computer didn't give us any warning we didn't get to deactivate Photoshop before the crash. I've been on the Adobe site for over an hour getting run around in circles without getting even close to finding a solution. Apparently, there are no living humans at Adobe and their customer care department consists of this "community" and a lot of redundant web pages. Decent customer service would be a nice touch for such a big company.
So sorry for your troubles. This is a user-to-user forum & we're all just product users like you. Unfortunately, we can't help you with deactivation/activation issues since we don't work for Adobe.
In the US, Customer support phone number: 1 (800) 833-6687
On-line chat is usually the best way to reach customer care. But their hours vary by region.
Contact Customer Care
Good luck!
Nancy O. -
I can't get Photoshop CS3 to start up?
Just installled SL and CS3 won't start up? Just hangs on loading screen?
New MBP.
Any idea's
ThanksTry removing the TWAIN plug-in and see if you can get it to at least start-up without problem. I have CS1 and evidently long ago deleted the TWAIN plug-in, but I believe it should be in the plug-in folder inside the application folder:
Mac HD/Applications/Adobe Photoshop CS/Plug-Ins/TWAIN
This has worked in the past (which is no doubt why mine is missing).
Francine
Francine
Schwieder -
I can't get Photoshop cs3 extended to work with Mavericks? Ideas?
I currently have photoshop cs3 and just upgraded to Mavericks on my Mac. No I cannot use cs3. Is there anything I can do to get cs3 to respond?
Found this on Canon's site about Lion problems which doesn't sound too promising. It says they hope it's fixed by 4th quarter 2011 but that's past now.
We need to inform you that, due to certain incompatibilities between Mac OS X Lion (10.7) and our previously released Mac OS X 10.6 Printer and Fax drivers, you may not be able to print and an error log file will be generated that could potentially fill up the hard drive of your Macintosh computer. The following drivers are not compatible with Mac OS X Lion (10.7) and may cause the above issue when used with the affected products listed below Mac UFR II LT Printer Driver Version 2.00-2.02 Canon PS Printer Driver for Macintosh Version 2.00-3.30 Canon FAX Driver for Macintosh Version 2.00-3.40 We offer our sincerest apologies to customers who have been inconvenienced by this problem. Phenomenon When using the above listed incompatible drivers, if a print job is submitted from the TextEdit or Preview application in Mac OS X Lion (10.7), the print job may fail and an error log will be generated. The interim driver posted in July 2011 allows for basic functionality under Mac OS X Lion (10.7). The current compatible driver versions are Mac UFR II LT Printer Driver Version 2.03 Canon PS Printer Driver for Macintosh Version 3.31 Canon FAX Driver for Macintosh Version 3.41 Official Mac OS X Lion (10.7) printer and fax drivers are expected to be released by the 4th quarter of 2011. -
I have been using Firefox on this (Presario CQ60) computer for over a year.. About a month ago it decided not to open again.. I uninstalled it and reinstalled it and that didn't help.. I haven't had time to work on it till today.. I uninstalled and tried to reinstall Firefox but this time it wouldn't even install.. What do I do.. I'm running Vista..
See these threads and pages about searchqu/searchnu:
*[[/questions/816181]]
*[[/questions/790833]]
*[[/questions/921690]]
*http://bit.ly/searchqutoolbar
*http://www.ilivid.com/faq.htm#8
*http://www.beyourownit.com/forum/security-malware-issues/4758-searchnu-searchqu.html -
installed cc photoshop and lightroom on desktop and lightroom on laptop, can't get photoshop to install on laptop, mac
What Mac? What version of OSX? What errors? You need to be more specific.
Mylenium -
How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5
If you do not own a license for CS5 there is not much you can do to get it thru Adobe. They only sell current versions of their software (CS6 or Creative Cloud). You would need to find a third party vendor and take your chances with them.
If you do own a CS5 license you can download the software thru the following page and use your serial number to activate:
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html -
I just upgraded my iMac to OS 10.8.5 from 10.6.8 and now I can not get the calendars on my Mac and my iPhone 4s (running iOS 8.3) to sync. I already tried replacing the calendars on the phone with those on my computer but nothing happened.
Set up iCloud
Set up iCloud (2) -
i accidentally deleted iPhoto on my mac and it says the the app was downloaded with a different apple id and now i can't get the app back without paying $14.99
Did you install it yourself are somebody else for you?
If you installed them yourself, but do not remember which AppleID you used, try all AppleIDs you might have used in turn.
If somene else set up your Mac for you, ask the person to reinstall it. If you bought the mac second hand, the previous owner needs to contact Apple to transfer the iLife apps. If that is not possible, delete the apps that you cannot update and buy them using your AppleID. -
I got locked out of Mac os 9 and now I can't get into OS 9 or OS X. All I see is the Macintosh SE and a finder face and text that says "mac os 9.2 welcome to mac os". I can't get into COntrol Panel to reset the password to allow me to get in.
Do you have OS X and OS 9 installed on your Mac? If so, startup with the Option key depressed. This will open the Startup Manager window. Select the OS you want to start from & click the right arrow.
Cheers, Tom -
Hi does anyone know what programme I can use to create DVD of a movie that I have created on iMovie? There is no iDVD on my mac. Is Burn any good? And if so, can I get it for free?
Thanks.There is no iDVD on my mac.
There is NO alternative. But iDVD is very easy to get.
iDVD is on the iLife 11 DISK. Buy here:
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
Is Burn any good?
iDVD is vastly superior, especially for movies. -
I just bought a ScanSnap scanner and it came with Adobe Acrobat Standard for Windows - but I have a Mac - can I get the Mac version?
Hi Dcee3,
Acrobat Standard has not been developed for Mac platform so Mac version is not available. It can only run on windows machine.
Regards,
Anand -
I would like to do the 10 dollar a month download for photoshop but i already have purchased Lightroom, can i get photoshop and muse for that price?
Change Account https://forums.adobe.com/thread/1465499 may help
-
My Mac can't get passed gray screen, and I cannot boot from cd. Help!
My Mac can't get passed gray screen, and I cannot boot from cd. Help!
Grey Screen
https://support.apple.com/kb/TS2570
https://discussions.apple.com/message/16276201#16276201 -
PSCS3 Mac: Can't get Applescript to open "desktop:folder:file.jpg"
I have Photoshop CS3 and am scripting a lengthy workflow, and part of it requires that I get Metadata out of files using Photoshop.
I can not get Photoshop to open a file. Once I have the file open, I can get the metadata out using UI scripting, but I have tried numerous approaches to open files and it has me stumped.
I am making it as a function that I can call from the main script which compares a new list of files with a list that is a few minutes old to determine which files are new and repeats with each file in the list. So the function will be getting a file name or a path.
Any help would be greatly appreciated!
BrianI got it! It needs to be an alias class path, and I had to concatenate the path incrementally before finally the whole path is in one variable I could coerce into an alias.
Of course, this is just one segment of the whole workflow.
tell application "Finder"
activate
set fileList to name of (items of folder "to gallery" of desktop)
repeat
set newFileList to name of (items of folder "to gallery" of desktop)
if length of newFileList > 0 then
repeat with thisFile in newFileList
if thisFile is in fileList then
else
my PSInfoGalAdd(thisFile)
end if
end repeat
set fileList to newFileList
end if
delay 30 --This will eventually be 4 minutes
end repeat
end tell
on PSInfoGalAdd(thisFile)
tell application "Adobe Photoshop CS3"
activate
set desktopPath to path to desktop
set toGalPath to desktopPath & "to gallery:" as string
set wholePath to toGalPath & thisFile
set openIt to wholePath as alias
open openIt
tell application "System Events"
tell process "Adobe Photoshop CS3"
key code 34 using {command down, option down, shift down} --File info window
delay 4
repeat 12 times
key code 125 --down arrow to Origin
delay 0.2
end repeat
repeat 5 times
key code 48 --tab to credit
delay 0.2
end repeat
key code 8 using command down --copy
delay 0.3
set credit to the clipboard
repeat 3 times
key code 48 --tab to instructions
delay 0.2
end repeat
key code 0 using command down --select all
delay 0.3
key code 8 using command down --copy
delay 0.3
set headline to the clipboard
key code 48 --tab to transmission reference
key code 0 using command down --select all
delay 0.3
key code 8 using command down --copy
delay 0.3
set body to the clipboard
key code 48 --tab
key code 36 --return key to dismiss info window
end tell
end tell
end tell
end PSInfoGalAdd
Maybe you are looking for
-
Deploying ADF Application to remote Weblogic server
Hi Everyone, I created an ADF Application 11.1.1.2 and deployed it successfully to the remote weblogic server 10.3.3 in same instance. I want to know can we create ADF application in one instance and deploy it in remote weblogic server creating Data
-
Pop Up Text in an applet on mouse over event
Can anyone help me to design a pop up text message to be displayed in an applet on moving your mouse over a particular control. Plz. Its urgent
-
Exporting to QT interactive, hyperlinks dead until audio/video stops
Keynote v3.0 I am making a simple presentation for export to Interactive Quicktime. I have only 3 slides 1) A menu with hyperlinks to the other 2 slides 2) A slide with a QT movie 3) A slide with mp3 audio Each of the media slides has a hyperlink bac
-
Supplier self-registration logo
Is there a possibility to add the company logo in the different supplier self-registration forms / pages? I cannot seem to find a way to add the company logo... Thanks, Bram
-
Why is a Screenshot a different color when dropped back in to iWeb in Safar
First post ever, new to iWeb. I took screenshot of an image and dropped the screenshot PNG back into my iweb pages. It blends correctly with the background color in IE (on a Vista PC) and Firefox on both Mac and PC but the color has shifted significa