CS3 and Vista: Application wont run

Just got a new laptop with Vista.  Installed CS3 no problem but now when I try to open any of the programs, nothing happens.  I've already tried running them as administrator and my laptop can definitely handle CS3.
Help!

Is it an Acer laptop? See here in the Dreamweaver FAQ.

Similar Messages

  • "SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run." What is this all about?? Shall I give up on Firefox?

    When I tried to use Firefox this morning I got this message with exclamation marks.
    "SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run."
    What is this all about?? Shall I give up on Firefox?

    Sorry to hear that. I understand your frustration and I hope they send back a better working N78-3.
    Myself, I count myself lucky. Everything works perfectly for me right now...email, bluetooth, maps, gps, 3rd party apps, battery life, 3G, wifi, etc. etc.
    The only issue I've been having is the dreaded reboots but I believe that may have to do with 3rd party apps. I recently uninstalled Google Search app from my N78 and since then it hasn't rebooted or shown any issues. This seems odd at first but makes sense if you think about the fact that the Google Search app loads itself into memory and runs in the background at all times.
    I did this this past Tuesday night and so far no reboots, crashes or any problems. I'm sure I just jinxed myself but I've been using it heavily over the last few days with no issues. Prior to this, it would usually reboot every 2 days. If it doesn't reboot for another few days I'll be happy.
    I would normally not stand for this but I just love the phone and if I got something else it'd probably be the iPhone 3G which has perhaps more software bugs and issues than the N78-3!!
    Best of luck. Here's hoping they release an update soon.

  • Is adobe dreamweaver and photoshop cs3 and above able to run on a windows surface 2 tablet?

    Is adobe Dreamweaver and Photoshop cs3 and above able to run on a windows surface 2 tablet?

    HI jrgomez2324,
    Kindly check the system requirements from the below mentioned links.
    Link 1 : System requirements | Photoshop
    Link 2 : System requirements | Dreamweaver
    Thanks,
    Atul Saini

  • When trying to install Reader 9.2 updates it wants me to close applications that are using reader. There is nothing listed and no applications are running. Any ideas?

    When trying to install Reader 9.2 updates it wants me to close applications that are using reader. There is nothing listed and no applications are running. Any ideas?

    Make sure your browser is closed and check to see if there are any processes related to Acrobat still running. If you are using Windows, Control-Alt-Delete > Processes tab. Look for AcroRd32.exe or Acrobat.exe or Acrotray.exe and stop these processes from running before you try your update again. A good ol' computer reboot might do the trick for you too.

  • HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

    abailey46 wrote:
    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
    Sorry we are unclear as to the external hard drive and its connection to the TC..
    For instance the light that blinks.. is that the TC or external hard disk or what.
    Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
    Are you actually running Snow Leopard as the profile states?
    How old is the TC?

  • Can the runtine engine and an application be run directly from a CD?

    Can an application be run directly from a CD without installing the runtime engine and application onto the computer?

    It depends on what library functions the application is using and what version of LabVIEW it was built in. In LV 7 and earlier you could just put the run-time files (the ones in Program Files\National Instruments\Shared\LabVIEW Run-Time...(lvrt.dll is the most crucial of the files, a full list can be found here on the developer zone)) in the same folder as the application and it would run without any problems in most cases.  
    In 7.1/7.1.1 math functions had to be installed as well if you had used any of those and could be a problem, otherwise it still worked (we do this still with apps that use serpdrv instead of VISA).
    With LV8 it is still possible, but the chance of the application depending on some function that you do not get included this way is much higher, I would just test it and see how it goes.
    MTO

  • CS3 and Vista problems

    A few days ago I bought a new PC with Vista (MEDION® AKOYA® P36830
    Authentieke Windows® Vista® Home Premium, AMD Phenom X4 9500 Quad Core (2,2 GHz), NVIDIA® GeForce 9600GT, 4 GB DDR2 RAM, 500 GB Hard Disk).
    Since I will use this PC for my graphical work I tried to install a trial version of Photoshop CS3.
    But... I can't even install the program on the PC !
    The setup starts but nothing happens anymore.
    In the Task Manager I can see that the process is running but that is all.
    I've tried to change the priority of the process to higher and lower with it wont install.
    I have read the Tech Note: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb400950&sliceId=1 but even switching the RAM modules won't work.
    Furthermore: NOT ONE ADOBE programm will install on this PC ! I have tried: Acrobat, Dreamweaver, InDesign...
    Please what more can I do to get PS CS3 working before I buy the complete package ?
    Sincere thanks !
    Lambert

    Lambert: There is a notice about the trial downloads on the opening page to the forums. EG: Don't do it right now.
    Having said that, I'm running all the programs you are trying to install on Vista without a hitch. Doesn't solve your problem, but maybe something else is the problem.
    What permissions do you have? Does your account have 'administrative'?

  • Cs3 and vista 64bit

    I have just taken delivery of a 64bit version of Vista home premium and have tried to install CS3 design Premium it runs through the checks and then stalls at the install.. any help would be apreciated.
    thanks

    Vexal, I completely sympathize. I've never had much trouble with Adobe software - other than having a forced upgrade to CS3 to get Vista compatibility, grrrr - but I've had such experiences with other, highly reputable makers.
    I once spent three days trying to install a version of QuickBooks. When I called for help, it turned out to be outside the free help (for some reason)... and as soon as I forked over the $45 session fee, the guy INSTANTLY told me that my IE5 installation - that's right, the browser, not any part of QB - had a buggy file that needed to be patched before QB would install. I've burned over that $45 ever since.
    One of the things you aren't clear about is whether the Vista 64 is the system's original OS or an upgrade - the "just taken possession of" implies you installed it as an upgrade. This was Vista's biggest failing and the source of 99% of its bad rep - it simply did not upgrade systems well. I suggest, if you want to cure this problem and avoid a host of others down the road, that you do a clean install of Vista 64 on the system. I know, it's a hassle, but it's necessary if you want stable system to work with. (Hint: throw a new hard drive in it and install Vista to that. Then you have the old drive to pillage for data and setup files until you're back to square one.)

  • ITunes 10.5 and Vista - will not run

    Well, I upgraded to 10.5 on my Vista 32 bit system. iTunes installs but simply is not responsive after starting up. Even more curious, it prevents Internet access until I reboot the machine. The Internet connection is fine -20 Mbps otherwise.
    I did a complete uninstall and re-install following the Apple support page. same outcome.
    No clue what to do.  No clue.

    Hello Everyone
    I had almost every problem that is listed on this fourm trying to install Itunes 10.5
    Here is the way I found to get it installed
    I had to do this on two computers
    I Downloaded Itunes 9.0.3 and installed it.
    That went fine, everything ok.
    Next I Downloaded Itunes 10.3.1 and installed it.
    That went fine. everything ok.
    Then I had Itunes check for Updates
    It downloaded Quicktime then Itunes 10.5 then Safari
    Everything loaded without a hitch
    Now I have Itunes running and have updated my Iphone 4 and Ipad
    No Problems at all.
    I think that the loading of Itunes 9.0,3 cleared up the bad files.
    Good Luck
    Jim

  • Applications wont run

    hi everyone.I am most likely the dumbest person to ever use a computer.I decided that my computer was running slow and took it upon myself to delete cookies and caches and of course folders i had no idea whether i needed them or not.meanwhile the applications that i try and run just loads and quits. <Edited by Moderator> I bought my computer from a used place and everything was already booted on here for me but i believe i erased something that must run my applications.I am trying to avoid taking the computer back into the store and thought maybe someone on here could help me.Please contact me if you know anything I can do.I bought an i pod for my daughter and she would really like some songs on it....thank you

    Welcome to Apple Discussions!
    You're actually in the wrong part of the forum here--something that seems to happen to first time posters on a regular basis. You need to post your question in the forum for your specific computer.
    What computer did you get? And did you get the manual and a set of CD's or DVD's with it? Put the computer information in your profile and then repost your problem in the right section and you will be able to get the help that you need. You can read "Help and Terms of Use" to find out how to do this.
    Good luck!

  • Jar application wont run correctly for win7

    hi,
    i'm new to java and tried to make an application that detects the hard disks connected to my computer.
    i used native for accessing windows ioctls that i compiled in a .dll.
    the .jar i made is working in windows 2003 but when i tried it in windows 7, i can't detect the disks unless i run netbeans as administrator and then run the code.
    when i run the .jar in win7, it doesn't show the drives.
    is there any way to help me detect devices in windows 7? i don't know if its the dll or the jar.
    TIA

    Hi,
    I agree with Brain, base on my experience, that must your task schedule setting up incorrect, please notice the following third party article, focus on the “Solitaire” illustration
    “Run only if logged on” select option.
    The related third party article:
    How do I create a Scheduled Task in Windows Server 2003?
    http://onlinehelp.hostbasket.com/server-hosting/server-management/windows/1095-how-do-i-create-a-scheduled-task-in-windows-server-2003.html
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Mixing CS3 and CS4 applications

    Basic question is can you do it?
    Here's what's up. I have CS3 design standard installed on my WIN XP machine. Use it every day. Then I began having issues with creating pdf files from MS Word docs (2003). Our IT dept. decides to upgrade me to Acrobat Pro CS4 using one of their site licenses (not upgrading from my CS3 design package). Our IT dept. also installs Contribute CS4 (again using one of their licenses, not my CS3).
    Now I'm having font issues and I'm wondering if part of the problem is that I'm running both CS3 (ID, Illy, PS) and CS4 (Acrobat Pro and Contribute).
    Upgrading my CS3 to CS4 will be a hard sell because we are a local health department with budget issues. IT support comes from the County, but my design software does NOT come from their budget.
    Do I need to be begging for change to upgrade my design software to CS4? Is anyone aware of issues related to using both 3 and 4 on the same machine?
    Any/All help appreciated.

    Yes, I have Acrobat Pro 9. (I assumed that since 8 came in CS3, 9 would have been CS4). The reason I asked is that there don't seem to be any fonts in the ID and shared CS3 font folders and I'm trying to figure out where they went. I also have Extensis Suitcase for Windows 11 to possibly install, but I wanted to find the CS3 fonts first.

  • HT203175 i just downloaded new version and then restarted the computer and now itunes wont run- it says it is a currupted or installed wrong.  What do I do so I don't loose everything.

    I was prompted to download newest version of itunes, which I did and the restarted the computer.  Now it says itunes is currupted or installed wrong.  What do I do so that I don't loose my music and apps.

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • Java applications wont run

    I am a student in a programming class, we are learning to create, compile, and run programs using Textpad and Java. When I create programs, I compile them but then when I try to run them and error message appears. "Exception in thread "main" java.lang.NoClassDefFoundError" What do I do to make my programs run?
    Please help and use simple explanation cuz I am new to programming.
    Thanks :)

    Try this:
    Use the command line to compile and run your program.
    It's easy, just Start->Run and type "cmd" in the Run prompt.
    Then use the "cd" command to locate the folder in wich your .java files are (example: as it usually starts in your user folder "C:\Documents and Settings\myUsername", all you'll have to type is, for example: cd "desktop\myProyect" asuming you have your files in a folder named myProject in your desktop).
    Then, since you already set your enviroment variables (the Path variable), you just have to type "javac ConvertCelsius.java". This will compile your file and all your custom classes that are imported.
    Then, type "java ConvertCelsius" (without the .java) to run it. I'm telling you this becouse I think your problem is more related to the textPad configuration that with the compiler itself. If you do this and you don't get any errors, then better check your textPad config...

  • BPEL control and Worklist Application cannot run after adding new realm

    I using command line to add new realm, roles, and users in JAZN.
    Then, I change the default system-jazn-data.xml (BPEL---should be BPEL or BPM, cannot remember, HW) to the new one.
    Then, stop and restart soa suite.
    In the applicaiton server control, I cannot find the BPEL and HW. I cannot start the Worklist Application, and bpel Control. It shows cannot find page.
    In jDeveloper, when I create a human task, it shows BPMIdentityServer error and the realm is emply.
    How to return to the default realm? Should I reinstall again?
    Thank you.

    Hi Pucha,
    In the file system-jazn-data.xml, I can find the new realm added by me.
    I reset the new realm to orabpel / hw_services / ruleauthor / ccore/ .......
    Then, I restart the server, create new AS and IS connection.
    However, I still cannot find the new realm name in the dropdown list of Human task in Jdeveloper.
    How to find the new realm in Jdeveloper? Did I miss something?
    I also create a new instance, new realm, new roles, new users, new AS connection, and IS connection. But I still cannot find the new realm in the dropdown list in the human task of Jdeveloper.
    Thanks.
    Edited by: [email protected] on Mar 16, 2009 3:43 PM

Maybe you are looking for