CS3 applications on Mac OSX 10.5.7 do not start anymore

Hi Folks, I have searched on forums and googled this issue to no avail. I have the CS3 Master Collection on my Mac OSX 10.5.7. It has been running fine until today when I started dreamweaver cs3 the application crashed just after opening with no warning or error message. I tried to restart and the icon bounced a few times and then nothing happened. I then tried Flash CS3 and Photoshop CS3, all the same they don't even display the loading screen? The only thing I have done recently that may have affected this is install a trial version of Flash Catalyst? I also notice a performance issue on my mac as well, movies do not run smoothly and when I scroll in the web browser it is jerky..
Can anyone help?
Cheers,
Steve

Further to my last post I have now discovered that it was a licensing issue with CS3. I do not know why the license issue came up but basically this was my problem here and now I have fixed it. When this issue started there were no warning, error or dialogue boxes so if anyone has the same issue I would try running the Licence Recovery tool from Adobe
Steve

Similar Messages

UI problem when run java swing application on MAC OSX

Hello,
I have problem when i run my java swing application on MAC OSX.
Dialog box is not properly visible in MAC means ita size increses.
its size incresed and and some content or buttons on that dialog are not fully visible.
I can only see partial message or button.
If any one have idea about this problem then give the solution.
Thanks :)
Shweta

I am using following way to create dialog
JOptionPane optionpane = new JOptionPane(new Object[]{lblMsgUp}, JOptionPane.OK_CANCEL_OPTION, JOptionPane.INFORMATION_MESSAGE, null, choices, "Save");
JDialog dialog = optionpane.createDialog(parent, "Save");
dialog.setSize(450, 125);
dialog.setVisible(true);

Application builder mac osx error

Hi all
I need help
I am just trying to build an application under MAC osx and I got this error see attachment
Jürgen
Attachments:
LabViewBuilderror-2.JPG ‏131 KB

Hmmm... I once had an error "duplicate path" when building.
As far as I can remember it was because I had several folders on my hard drive with different versions of the my soft and the problem was that 2 VIs with the same name were loaded from different place.
Could it be the same for you ?
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

I am getting Java Script errors for InDesign only in CS3 on my Mac OSX 10.9.1

When I try to open InDesign (CS3) on my Mac OSX 10.9.1 I get Java Script Error
Error Number 45
Error String Object is Invalid
Line 387
later
Line 428
I tried checking the prompt line & I get this message
"CGSFlushWindow" is obsolete use "GGSFlushWindowContentRegion" instead
I have NO clue what that means
HELP!!!!!!!!

It means what it says: The respective function no longer exists. Anyway, ask in the ID forum. I'm sure someone there can help you fix whatever script is running amok.
Mylenium

After reloading adobe creative suite cs3 on my mac 10.4.11 acrobat will not open any pdfs it previously opened. help!

after reloading adobe creative suite cs3 on my mac 10.4.11 acrobat will not open any pdfs it previously opened. help!

hello.   hey, thanks very much for writing back. i got some good info with a search or two. (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs, OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
from User /Preferences/Adobe:
com.adobe.AdobePremierePro.plist
com.Adobe.Premiere Pro.5.0.plist
and from System Preferences:
the file: Adobe Premiere Pro Prefs
and..
/.../Premiere Pro/5.0/...
AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
Debug Database.txt
Placeholder Preset.epr
PostEncodeCmds.pref
PresetCache.xml
Trace Database.txt
NOTE:
of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but... it seems to have worked.
I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering, so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
happy editing,
peace

What can I do when I try to access a URL and get the message "MAC OSX doesn't recognize internet addresses starting with "c:"?

I recently tried to download a pdf file from a website in the UK. Up popped a message saying the website could not be accessed, followed by this message: "MAC OSX doesn't recognize internet addresses starting with "c:". I was able to access the website easily (its domain was "www") and the page listing the pdfs, but could not download a pdf. Of course," c:" appears not to be a valid domain name, but why would anyone use "c:" in place of a domain name in their URL? And what can I do about the problem? I'm using Snow Leopard 10.6.8 and Safari 5.1.10, but also have Firefox and Chrome loaded. Thanks.

An address starting with c: wouldn't be any kind of domain name. C: is the drive lettering system DOS and and later uses. By default, A: and B: are reserved for your first and second floppy disk drive. All hard drives are then named C: through Z:, if you have that many. C: is normally your startup disk.
Anyway, their PDF file is incorrectly linked to a file directly on the C: drive of someone's computer. It's not going to work no matter what you do.

I am trying to reinstall Mac OSX, but my computer does not read installation cd

Hello, I am trying to reinstall Mac OSX, but my computer does not read installation cd. After restart, I hold C but either eject cd or doesn't read and computer boots up normally. I even ordered a new pack of installation cd, but still the same problem. Is there anybody can help me fixing this issue, because my Macbook pro has lots of software problem and when I spoke to tech, they said it needs to reformat and reinstall the OSX to solve all my problems. Please help me to reinstall my OSX!

Possible solutions:
You need to hold the c key down before booting
You need to use the built in keyboard, you have other hardware connected
You need the machine specific 10.6.4+ disks for that machine, the retail 10.6.3 disks won't work
There is a firmware password on the machine preventing the at boot key command functions
Try the option key for Startup Manager to boot from the disk, right after the "bong"
Your Superdrive lense is dirty or not operating, other hardware issues
You have malware of some sort

TS1410 my itunes 9.2 (mac osx 10.4.11) does not recognize iphone 4s

my itunes 9.2 (mac osx 10.4.11) does not recognize iphone 4s

Since you're running iTunes 9.2, your Mac has a G4 or better CPU. You need to purchase and install Mac OS X 10.5(G4 or G5) or Mac OS X 10.6(Intel) from a DVD. Mac OS X 10.6 DVDs are free for paid MobileMe members.
(66714)

Help! After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

In this case, I think that there's something damaged that can't be fixed just reinstalling OS X.
If you don't want to lose files, you will have to create a second partition in the hard drive and install OS X there, so you will be able to recover everything you need. Then, you will have to erase the first partition and reinstall OS X. Follow these steps:
1. Hold Command and R keys while your Mac is starting to start into OS X Recovery, and open Disk Utility.
2. You can follow the steps of this site to create a second partition > http://pondini.org/OSX/DU3.html
3. After creating the second partition, close Disk Utility and install OS X on the second partition.
4. When the installation finishes, open Finder and, in the sidebar, you will see the other partition. Open it and recover the files you need.
5. After doing that, repeat the step 1.
6. Select “Macintosh HD” in the sidebar, go to Erase tab and erase the disk.
7. Close Disk Utility and install OS X on the first partition.
After doing all of these steps (you will need a lot of time to do this), you can delete the second partition you created and add the size of this partition into the first one > http://pondini.org/OSX/DU4.html

Lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

Reh... Doesn't work on my 2012 Mac mini. A function key set in Sys Prefs worked in Leopard and Lion on my MB but I cannot get any key to work using SysPref Dictation & Speech. It is befuddling and now I have to go to Edit-Speech to turn on and turn off speech to selected text.
I have used Macs and Apple 2es since cave man days and Apple is becoming so befuddling I am wondering if there is even an advantage to it over Windows XP. I spent a lot on this little box, it looks good (the first one had to be exchanged as it wouldn't link to my keyboard ???) but Apple intuitive does no longer seem meaningful.
If speech to text no longer is accessible by short cuts using Fkeys, why bother to have it in Syst Prefs?
Apple is losing its way. The pleasure is gone and no one at Apple seems to care.

Transferring Boris FS plug-ins from CS3 to CS4 - Mac OSX

I purchased Continuum Complete 5 AE for Mac OSX to use the plug-ins for my CS3 versions of After Effects and Premiere Pro. Now that I have CS4 versions of After Effects and Premiere Pro, how do transfer the plug-ins to work with the CS4 versions. According to Boris FX website, Continuum Complete is compatible for CS4, but it doesn't mention how to transfer the files. I've emailed them, but haven't heard back from them. Looking within the application folders of the CS3 versions, it doesn't look like it's a simple drag and drop into a plug-in folder. Being that I can't find the plug-ins within the application folder. Does anybody know how to do this?

What happens when you try to install the plugins to CS4?

From where to download and install applications for MAC-OSX.

hello everyone,
I am trying to develop experimental HLS server and for that i need following cmd-line tools for my MAC-OSX-10.6.8.
I have read some where that these tools are there from OSX version number 10.6 but I have only "mediastreamsegmenter"command on my MAC machine.
I am very new to MAC environment and I don't know how to download/install new libraries and applications for MAC.
Can someone please provide some help,
from where to download and install these cmd-line tools?
I need following tools:
1. mediastreamsegmenter
2. mediafilesegmenter
3. mediastreamvalidator.
4. variantplaylistcreator
Thanks

Maybe this http://stackoverflow.com/questions/2973411/implementing-apples-http-live-streami ng-problem-with-mediafilesegmenter-tool can help you.
Stefan

MAC OSX 10.9 and Java Web start

Hello All ,
We are facing a warning when we tried to launch the JNLP on MAC using Java 1.7_45 .
Warning message - "This Java Application will be blocked in a future Java Security update because the jar file manifest does not contain the Permissions attribute . Please contact the Publisher for
more information "
Warning is about adding permissions to application jar files but we have already done this on all the jars .
Added code base and permissions attribute in manifest file of each jar . This works fine on Windows 7 and XP with same Java version .
Example -
Permissions: all-permissions
Codebase: code base location from jnlp
Interestingly Java console does not show any warnings so i am not sure why Java is showing this message that the application will be blocked in future java releases on MAC if permissions is not added to Jar file .
Looking at all the testing it seems there is some kind of issue between Java 7 update 45 and MAC OSX 10.9
(As the same jnlp works without any warnings on other OS )
Any help will be much appreciated .
System Details
OS - MAC OSX 10.9
Java - 1.7_45
thanks
Rupesh

Hi,
The Drivers are available via Apple Software Update,
In order to configure it wirelessly you may use the HP Easy Wireless Install app.
You may find a step by step guide in the following document:
h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4337543&spf_p.tpst...
The app iself can be downloaded from the Mac App Store:
https://itunes.apple.com/us/app/hp-easy-wireless-setup/id876495880?mt=12
If you experience any issues while trying to locate the pritner during the wireless configuration. restoring the network defaults for the printer can be done by pressing and holding both the Cancel ( ), the Wireless ( ), and the Power ( ) buttons for three seconds.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

New MAC OSX Address Book Groups Do Not Appear in iTunes for iPhone Sync?

New Groups (and their associated new contacts) created in the MAC OSX Address Book since the initial installation of my iPhone do not appear in iTunes, and hence do not sync with iPhone. I have tried the Advanced - Replace information on this iPhone - Contacts to no avail.

I had this problem for several weeks now!
I followed your procedure and - addresses there, calender gone! Even worse!
So I copied the old SyncServices Folder back into /Library/Application Support/
result as expected, calender there, addresses gone.
My lady called, I was on the phone for 10 minutes or so. Coming back to my iMac I see a Sync-Problem-Icon jumping in the dock. I've been told that one of my addresses has a conflict between adressbook and iPhone. OK. Solve it with adressbook, please.
I open iTunes and everything is there, calender data and adresses!
Finally!
Thank you, Maurizio!
Peter

How do I update to Mac OSX 10.8.4? Not OSX 10.8.5..

Hi there
I'm currently running OSX 10.7.5 Lion on my Macbook Pro and need to update to OSX 10.8.4 Mountain Lion specifically
I intend to coinstall Pro Tools 10.3.7 and latest version of Pro Tools 11 on the machine and from what I can gather on Avid website..
"The co-install is only supported on OSX 10.8.4.."
I am ready to purchase and install Mac OSX 10.8 Mountain Lion here on the Apple Store.
However I am pretty sure this will update my system to 10.8.5 which will not be supported.
Any advice or methods I could try would be greatly apprectiated..
From Avid website:
Pro Tools 10.3.7 and Mac OS X 10.8.4 are supported for co-install with Pro Tools 11.x (details)Mac OS X: Pro Tools 10.3.7 is qualified with Mac OS X 10.8.4. For co-install with Pro Tool 11.x, use either Mac OS X 10.8.3 or 10.8.4.
Thanks
Tom

Thanks for the info.
Unfortunately I don't have an installer file for OS X 10.8.4 ..
Do you think Apple Support could push that particular update out to machine when I go to purchase?
Alternatively I could go searching the net for an installer but then I'd have no idea what I was installing was valid.
Do you know if I installed 10.8.5 is it currently possible to roll back to 10.8.4?
Tom

CS3 applications on Mac OSX 10.5.7 do not start anymore

Similar Messages

Maybe you are looking for