CS3 - Audio missing only in timeline (but not in bins)
Hello,
I recent worked on a project that needs some re-edits. However, in the timeline, the audio is missing but in the project bin, the clips play fine (in the prview monitor).
The timeline does have all my edits, including my custome levels... just the waveform is blank so I am guessing that Premiere dump teh audio in teh timeline.
Is there a way to reload the clip in the timeline while keeping my audio levels?
I did reset the prefs, did reboots, etc... I am using Windows Vista 64bit, Premiere Pro CS3. I am usuing a Dual Xeons (4 cores total) with 8Gbs of ram. As far as I can tell, I have the latest drivers, updates, but just some bad luck I guess...
Any help is appreciated.
Mark
Perhaps:
FAQ:Why is there no wave form on the timeline?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ
Similar Messages
-
Mountain Lion download has messed up my calendar. One calendar is missing on my Mac but not on my ipad or iPhone
OKAY FOLKS, I found the answer. I figured the only explination could be with my iCloud Account. I tried EVERYTHING, read every discussion on this topic. It WASN'T b/c I had an old Mobile Me account. It WASN'T b/c I didn't have the sttings right. I rebooted, erased data, EVERYTHING. The only solution was to create a NEW iCloud account - I chose a new address through Apple (me.com). Even though I already have a me.com email address and a different Apple ID I figured starting fresh was the only way. Sadly, I lost all of my calendar data (when I tried to import my old calendar data from a backup it was associated with the old iCloud account and could not be edited) but my contacts were saved. I just re-entered my calendar information... figured this would be less time consuming than trying to reboot and research the issue 10 more hours!
Here are the steps I used:
1- iCloud was OFF on my iPhone to start
2- Export your iCal and iContacts data from your Mac to a backup (you WILL lose your data)
3- On iPhone went to Settings, iCloud and went through the proper steps to set up a new iCloud account with a NEW email address (me.com)
4- On iMac under System Preferences I deleted my OLD iCloud account (it will prompt you stating you will lose your data or you can merge/save). The only way I could get it to work was to accept the warning it was going to delete everything
5- Set up a NEW iCloud account on my Mac with the NEW me.com account I set up on my iPhone. Somehow my Contacts were kept in tact, uploaded to iCloud and to my iPhone. Had issues with my iCal data, but I entered all the information manually.
Everything is syncing great! Haven't set this up yet on my iPad but will do that next. I'm hopeful!! -
Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.
Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay -
My Contact from ICloud imports only the name but not every thing else if I want to import it to Contact on my Mac. But that only happens with my own card.
Before, my V-Card in Contacts on my Mac was ok, but now it disappeared. When I try to import it from ICloud only my name appears.
Can anyone help me? ThanksThe backup of your iPod Touch would include your camera roll photos. Restoring the backup to another iPod Touch or iPhone would recover them. Photos will not be restored by restoring the backup to an iPad.
Note: Apple deletes iCloud backups after 180 days of inactivity so be sure to do this before then. -
My purchases are only in "purchases" but not in Mediathek Music
My purchases are only in "purchases" but not in Mediathek Music. How to move them to the Mediathek?
BR WolfgangOh, rats. Do I need to remove the folder that I published to? I'm not even sure where to find it. I have republished successfully with the comments still in iweb but they don't show up on-line. I'd really like to get them back on if possible.
-
I have to open website which opens only with google but not from safari. how can i get such google?
i have a website which opens only with google, but not google from safari. how i can get google w/o using safari?
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support. -
iMovie seems to have developed a glitch. When i try to import photos they show in the timeline but not in the movie.
Any ideas?You are probably looking in the wrong place - all photos in Photo view and in event too unless you have a corrupted library
most common cause of your not finding them is bad sort - view menu ==> sort events
Nest most common cause is a bad data/time on the camera - this can be corrected using a smart album to find the photos from that camera and then using using the adjust time/date command to fix the bad ones
YOu can alwasy find the event a Photo is in by selecting it and selecting show event
LN -
16:9 footage displays properly in timeline but not in menu
Greetings guys,
this is a follow up to a 16:9 import issue I had previously.
We now have a good quality 16:9 file that imports as an asset into Encore no problem. It plays back perfectly in Encore in a timeline but if I use the footage as a menu, which I intend to do with one clip then it puts letter boxes either side of the footage. I check 16:9 in the properties but it doesn't help... I don't understand why encore will play the widescreen footage and display it properly in a timeline but not as a menu...
any thoughts would be great,
here's some footage details:
CODEC: MPEG2
FRAME RATE: 25.000 /s
DAR: 1.778 (16:9)
720 x 576
SAR: 1.250 (5:4)
PAR: 1.422 (~10:7)
cheers,
Grant :)Select the menu then "Edit->Edit Menu in Photoshop"
Verify the menu dimension in Photoshop, if the menu is HD size then reduce it to 720x576.
Or use any DV-PAL size menu from Encore library. -
HP Pavilion 15-p027ne, Audio working through headphones/earphones but not through speakers
HP Pavilion 15-p027ne:
Audio working through headphones/earphones but not through speakers.
I downgraded from windows 8.1 to Windows 7 (64-bit) and the problem is still not resolved.
Appreciate any troubleshooting tips.
Thanks.
- HP Pavilion User.Hi there @donimuha
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are getting sound from the headphones/earplugs but not from the system speakers. I am happy to assist you with this.
As the sound is working through the audio jack, I will assume for now that the audio driver is fine. Please check through the following page, which is very comprehensive. If you are still having a problem it is possibly a hardware issue with the speakers.
No Sound from the Speakers (Windows 7)
Let me know if that works for you.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
HT1414 Can I upgrade my Iphone 4 to only ios 5 but not ios 6 now?
Can I upgrade my Iphone 4 (4.3.3) to only ios 5 but not ios 6 now?
No.
Any update is to the latest version of iOS for your Device. -
The title more or less says it all. I have Elements 13 & am Using the Panasonic HC 750V. I shot in AVCHD 1080/60p & instead of surround sound choose the directed feature to focus on the voices in front of me. The audio works in preview but not on the timeline. I am also getting Headless errors when working with premiere that pop up in windows but it does not shut down the system.
Any help apprecaited.pc
Have you updated your Premiere Elements 13 to 13.1 using an opened project's Help Menu/Update. If not, please do so.
Just some points of clarification on the AVCHD 1080/60p with which you are having audio problem in Premiere Elements 13.
a. I see no option to record to tape with your Panasonic model. Is there one? if not, what was recorded to, a memory card?
b. When you talk about directed not surround audio, are you saying that your video uses Dolby Digital 2 channel stereo instead of 5.1 channel?
c. Is your AVCHD footage presented to you as AVCHD.mts rather than AVCHD.mp4. I think that is the case if you are referring to Dolby Digital
rather than AAC audio.
Are you saying that you get play back video and audio if you double click the video's thumbnail in Project Assets, but you get video but no audio after you drag the file to the Timeline and play back its contents in the Edit area monitor?
a. Have you checked the Volume control under the Adjust Tab/Adjustments Palette/Volume Panel expanded to make sure the Volume has been taken all the way down? Under that condition, you will get play back in the Preview Window, but no audio from the Timeline level play back in the Edit area monitor.
b. In that same regard, if you look at the Timeline audio clip, note a yellow orange line that runs horizontally across the duration of the audio clip. Is that at the bottom of the frame or is it in the middle or at the top?
Do you work with the Elements Organizer at all? That Headess issue sounds like an Elements Organizer issue. More on that later. That issue should not prevent you from continuing your work. But we will explore that next.
Thanks.
ATR -
Why does GarageBand audio work for guest user but not my account?
Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account? Then we will need to troubleshoot your preferences."
I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
Remove these files from your User Library to a folder on your Desktop:
~/Library/Containers/com.apple.garageband10/
~/Library/Preferences/com.apple.garageband.plist
~/Library/Caches/garageband
Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
Select the "Home" folder icon (the little house) in the Finder's sidebar and press the key combination ⌘J to open the "view options".
Enable "Show Library Folder".
Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside: ~/Library/Containers/com.apple.garageband10/,
~/Library/Caches/garageband . -
Imported Audio CD, two songs imported but not included on album with rest of songs
I just bought an Audio CD "Red River Blue", Artist Blake Shelton. I imported the CD into my iTunes library.
The CD has 11 songs on it. All 11 songs were imported into my iTunes library. Two of the songs had additional artists listed on the credits.
Track 7 Blake Shelton with Martina McBride and Track 11 Blake Selton with Miranda Lambert.
These two songs were imported into my library but not included in the Album. They were labeled with their correct track number and the album was missing a song for track 7 and track 11. There was no cover artwork associated with those songs.
When I moved the album to a playlist these two songs were not included.
This is clearly an error in the current iTunes!
Back before iTunes had the new visual format and new user interface I did not have this problem.
I have reviewed all the preferences for iTunes but can not find any that would seem to control this behavior. I can not conceive that importing a cd should work this way.
I tried to find a way to correct this situation and found that if you did get info on all 11 songs you could force them to be included on one album.
The resulting album did not show track 7 in the correct order and the two tracks were still missing the cover artwork.
I believe that in one of the iTunes updates that required a library conversion all my albums that had this situation were converted wrong so they broke apart songs from their albums.
JimAnd thinking about it, when I reconnected last Sunday I recall that I got that prompt on my phone something like "Do you trust this computer?". Not seen that one for a while.
-
Artist/album names missing when adding folder (but not all of them)
Yesterday I found iTunes couldn't locate the folder where I store MP3 downloads - ie. I got the dreaded '!' alongside most tracks. When I used the Add Folder command I ended up getting a duplicate of virtually every track.
However most of the duplicate tracks were only shown with the track number on the original album plus about 12-15 characters from the title (ie. character string used as a label for the MP3 file). There was no detail of the artist or album.
Given the large number of duplicates involved I decided to clear out the library and have just used Add Folder. Same outcome - 1/3rd of the tracks described in full; the other 2/3rds just show track number and some of the title.
Suggestions on (a) where I'm going wrong; and (b) whether I can use contents in the Previous iTunes library folder to recreate the library would be greatly appreciated. Many thanks.As I've already said this question has been answered maybe no one is monitoring this topic but ... I've just worked out the reason the detail is missing is because the tracks which have limited detail are in WAV format.
This is where I am completely lost because they have all been downloaded from the iTunes store or from Amazon as MP3 files, and I'm not aware either of the download functions comes with an add-on called "automatically convert to WAV".
The irony is that this is quite convenient but if anyone can provide an explanation of how it is occurring then I would be interested to hear because I can't figure it out. May still trust my sanity, but not my memory! -
Why would the audio play through the headphones but not the speakers?
I am working on an app that has embedded video. The audio works fine through my speakers and headphones as it does for some of my coworkers, but I also have other coworkers who get audio through the headphones but not the speakers. It's a variety of devices, 4, 4S, and 5. Any thoughts?
If you are working on developing an app perhaps you should try the developers forum.
Maybe you are looking for
-
We have QIP 7216 dvr and western digital 1T eSata drive (I can't quickly find the model number but it was one on the Verizon recommended list). The eSata is about 50 percent full. Some of the shows we recorded we can't seem to play. When we click on
-
I can't find a way to view and edit the text which appears on the spine of the dustcover or the photo book itself. When I preview the book it appears on the dustcover and the book, but not when I'm back in the creation or editing windows. I've prin
-
Can I create password protected pages within iWeb? Or, do I need to use a more advance web editor? I've created password protected web pages before using templates provided by my webhost and was just wondering if this is supported in iWeb.
-
Hi Friends, What is the use of loop in table(main area) in smartforms??
-
How do I turn cookies complely on in safari.
How do I turn cookies completely of for safari on.