CS3 better for color corrections

I am a professional retoucher and image editor.15 plus years. I work exclusively in Photoshop.
The Adjustment layers in CS4 have too many changes and eliminated features.
1. An Adjustment layer with in a layer set with layer set mask. Disables the numeric read out of placed color samples in the info palette!
2. No way to cycle points on a curve!
Why? Why? Why?

In CS4:
1. Have you got the Mask targeted or the Layer Set folder itself?
and
2. Use the Plus and Minus keys to cycle through points on a Curve in CS4.
Also investigate the TAT ("Pointy Finger" tool) in the Adjustments panel.

Similar Messages

  • Best procedure for setting iMac screen for color correction

    Hi All
    I know the iMac screen is not ideal for color correction, but I would like to know the best way to set the color space of the iMac screen to achieve the best possible result when color correcting.
    Specs: iMac 21.5” 3.06GHz Core 2 Duo
    Cheers
    -j-

    use Generic RGB
    any other profile is for colour managed still photography

  • Advice for logical workflow for color correcting and color grading

    I am an experienced user of  PPRO CS5.  I am a novice with color correcting and color grading.  I am also just barely competant in AE CS5.  It has been suggested that I use AE for color correcting my footage.  Can you advise me as to the most logical workflow for doing this in coordination with PPRO CS5?  Are there some tutorials that you recommend?  I subscribe to Lynda.com and I think that they have some great tutorials, I am unsure as to where to begin looking and what to search for.
    Thanks so much,
    Lisa

    lisaellensegal wrote:
    I am an experienced user of  PPRO CS5.  I am a novice with color correcting and color grading.  I am also just barely competant in AE CS5.  It has been suggested that I use AE for color correcting my footage.
    You can do it that way, sure. But you don't have to. You can accomplish quite a lot without leaving PPro. This has two major advantages. First, if you aren't using AE for anything else, it gets you out of using AE at all, so gets you out of climbing another set  of learning curves.
    Second, even if you are using AE for other things (I use AE to make motion lower thirds, for example), doing the work in PPro can improve exporting speeds. This is because AE gets restricted to a single processor core in some workflows as discussed in this thread and others (search around if you're interested). This can make exporting take 3x as long or longer, depending on how much footage has to be processed by AE.
    So, how to do color correction without leaving PPro? Use either a luma corrector or luma curve effect to set black and white points, and contrast (use a waveform monitor to help). Then use a three way color corrector effect to get rid of any residual color casts (use the vectorscope to help, and the RGB parade, etc.).
    If you find you have specific colors that need to be fixed, you can apply another three way color correction effect and use it to make that secondary color correction (for example I find the blue dyes used in many labels tend to fluoresce under fluorescent lighting, and has to be desaturated with a secondary color correction or it "blooms" on an HDTV -- IOW, it has to be made "broadcast safe").
    If you want tutorials for using these tools, the ones on Creative Cow by Andrew Devis are quite good, and free. The ones on color correction with PPro cs6 start at tutorial number 47. There's a bunch of them. All good.
    Finally, get a copy of Van Hurkman's Color Correction Handbook. May be the best technical book I've ever read, and it'll certainly point you in the right direction for doing color correction work regardless of which tools you use to do it.

  • HT4589 Is there a recomended way to delete proxy and optimized clips once a project is completed and is ready for archive? also, can proxy and optimized clips be removed (to save space) once a project is ready for color correction and the original clips a

    Is there a recomended way to delete proxy and optimized clips once a project is completed and is ready for archive? also, can proxy and optimized clips be removed (to save space) once a project is ready for color correction and the original clips are used

    No, they are NOT the same as proxy or optimized.
    When you add a clip to your timeline and, say, apply an effect to it, or superimpose a title on the clip, FCP X has to make many calculations to determine what color each pixel of each frame should be. If a section of your timeline is not rendered, it has to do all these calculations every time you play those frames. A render file has the frames already "calculated", so it plays fast and smoothly.
    For simple compositions and a fast computer, you may avoid rendering completely - and you may also choose to only render the portions where playback stutters.
    Render files can be safely deleted. FCP X can recreate them if needed (either automatically if you have "background render" on, or on demand, when you select the "render" or "render all" commands).

  • Resources for getting better at color correction

    Hi!
    Can anyone recommend some sources, books, instructional movies or similar for advanced color correcting and image coloring?
    I am fairly decent at it already, I know the technical tools for it, I mostly use scopes and the 3-way color corrector for correcting the
    basics like luminance and white balance, but I want to learn more about the coloring.
    I'm looking for some inspiring resources for "movie color theory creativity" I guess.
    Help much appreciated!

    Thanks for another book tip.
    Regarding the luminance levels, coming from a photoshop background it comes naturally for me to tune these with curves or a simple levels adjustment. However the basic "levels" effect itself I find pretty annoying because of that non-working win95 histogram that pops out, it's not a very big problem but it seems odd to me that it's not possible to get a simple working histogram in PPRO in addittion to the scopes. I do understand that histograms
    doesnt have such a historical place in video editing as in still image editing, and the more I use and learn scopes I definetly see the benefits of it. Still, does someone happen to know if there there is such thing as a *affordable* plugin available for PPRO that can display a proper histogram?
    And by the way, just out of curiosity: Im editing 1080/30 video from my 5D MKII and I am constantly amazed with the dynamic range and how much tinkering the video can take before image quality starts to suffer, even with the h264 compression. Do a professional HD camera 10 times the cost really deliver that much better raw footage quality (consider image quality alone of course) than this?
    Thanks again

  • Premiere Pro CS3 then After Effects CS3 for Color Correction?

    Hello All,
    I'm at a bit of a loss here, it seems like it's a no brainer to be able to do this. I'm trying to edit my film in Premiere and then use After Effects to do color correction using Color Finesse 2. But there doesn't seem to be ANY way to keep a project so you can continue to edit in premiere while you also keep all your color correction??
    You can do color correction in AE and export a premiere project but premiere won't recognize the Color Finesse Filter so you lose all you color correction!
    Or I can edit the whole project in premiere and open it in after effects to do color correction, but then if there is a single edit change that needs to be done in premiere again i've once again lost my Color Correction to bring it back.
    Is this really the case that I can't use these expensive packages together this way? It seems like there has to be a solution! If Adobe just made it so Premiere kept the "links" to your filters in the project, instead of killing an unrecognizable one. Then when you opened it back in after effects after your edit your Color Correction would still be there.
    Any one have any advice?
    Thanks,
    -Ethan

    Thanks for all the suggestions guys, all good ideas.
    Aanarav, Your idea to just get Color Finesse for premiere I suppose I could do. It's $545 which isn't exactly pocket change, but it would probably be worth it, if there is another way other than breaking the bank book for software I already own i'd like to try to get away with it.
    Steven Gotz
    Dynamic link is unfortunately a feature only of the production studio package which is like $1100 upgrade from what I have...so that's kinda out of the question for me.
    Jon Sands
    Great idea here. I really thought it might work since premiere seems to use what are called after effects plugin files too. But after copying and pasting for a while it doesn't look like it actually sees it as a plugin anywhere I paste it. :( If anyone knows of a way to get that to work I would be seriously grateful!
    I guess it sounds like the only way out is to spend cash, sigh such is so often the case is seems.
    -Ethan

  • Monitor for color correction

    Hello guys,
    I am a newbie to Color and Color Correction. I have a dual monitor setup with my Mac Pro.
    I have two 24 inches of DELL 2408WFP & DELL 2407WFP. These monitors have different color, and I think it is just stupid how Dell manufactures them.
    Anyways, From what I have learned, I know I am not suppose to do perform color correction for videos on any regular LCD monitors. Can you experts suggest me good color correction monitor? Not too expensive. I am not doing any major flim/music video or anything such. This is just a hobby of mine, and I'd like to learn new things as time goes on. Most of my videos are travel videos & I try to make a cinematography out of it. I also shoot landscapes.
    I hope you guys can direct me right.
    Thanks,
    Lowell

    I think there is a lot of snobery on this forum regarding hardware requirements. If you are not entertaining clients who have just come from a Da Vinci suite, then you CAN live with out a Broadcast monitor that meets EBU specs. The important thing is to use a video monitor and not a computer monitor. You will need a decklink like card to get the video into composite or component format, that later will give a cleaner image but most television is viewed in composite any way. Colorgrading is a matter of comparing the before and after image and comparing the graded shot with the pictures around it. The scopes will keep you informed of the limits and will help you interprit the monitor. Rember if the shot looks better after grading on a cheaper monitor then it will look better on a Grade A monitor with SDI inputs. Don't let the "big" boys put you off, and use the software that you own to inprove your video and your skill-set.
    Good luck from Boaz

  • Calibrating FCP for Color Correcting

    I'm about to do some color correcting for a video project. The challenging thing is I don't have a TV monitor hooked up to my computer, which is preventing me from seeing what the exact color looks like.
    Does anyone know a way I can callibrate my FCP's canvas window to show the same color a TV monitor would show?
    Thanks for your help.

    TVs aren't used for this, as they vary greatly in every way...brightness, contrast, color...more. TV's aren't designed for broadcast color correction. You can try, but it won't be a true representation. Sorry to be a purist, but in this case, it is true.
    Try these articles:
    http://www.videouniversity.com/tvbars2.htm
    http://www.bluesky-web.com/colorbars.html
    What is this for? If you are doing any sort of broadcast work, then you'd better get a broadcast monitor. Can't afford it? Aren't they paying you? Paying for your system?
    Shane
    "There's no need to fear, UNDERDOG is here!"

  • Color correct for color correcting?

    Hi
    I have a film to color correct and was wondering: How do I know if the color I'm seeing on my 2010 MBP 2.66 is correct? Is there a process to make it right, or a test to test it?
    I see there's a way to calibrate it, is that any better than the display profile Apple apparently created or installed last month?
    best
    elmer

    Hello elmerlang,
    Thanks for using Apple Support Communities.
    To calibrate your display follow the steps in the article below:
    OS X Mavericks: Calibrate your display
    http://support.apple.com/kb/PH13768
    Take care,
    Alex H.

  • Configuring an external Monitor for Color Correction?

    I currently have my Mac Book Pro 17in connected by the mini DV port and one USB port to a Mac 30" Cinema Display for editing on FCP7. I use it in a two monitor configuration with my Bin on the laptop screen and the FCP interface on the Cinema display. This works well for me.
    I also have an external ESata drive via PCI slot. I would like to connect an external video monitor as well for quality checks and Color correction purposes. I am also looking for advice on what sort of external video monitor I should get and how would I connect it to the laptop or via some external third party device. I would be hoping to use a video monitor connected via a hdmi connection. Most of the work I do is supplied on drives, original material EX3 or Canon and some on HDV (Camera) that I ingest via Firewire800. Many thanks in advance.

    Sorry Mark, you can't always have everything ... with the Matrox MXO2 (or similar, like Motu HDX-SDI) you wouldn't be able to use your eSATA drive at the same time as the I/O device as they both use the ExpressCard/34 port ... you would have to use a FW800 drive for your media instead. On the plus side the MXO2 includes a calibration tool which can help you calibrate your LCD/LED screen via HDMI for accurate color reproduction.
    An alternative device would be the AJA IoHD (or perhaps Motu V4HD) which connects via FW800. It's a superb piece of kit but is costly and doesn't offer any calibration utility ... that said, a good quality plasma display, such as a Panasonic Pro Plasma, can be found relatively cheaply and many of these have built in picture controls suitable for getting an accurate calibration.
    The future is much brighter for Mac laptop users with the introduction of the Thunderbolt connector on the latest MBP revisions. As with FireWire and ExpressCard, you can expect to see I/O devices, hard drives and monitors etc that will connect directly via that connection, greatly expanding the capabilities of a simple laptop setup.

  • What's the best decklink usage apply for color correction

    Hi Guys,
    recently i jsut noticed that matrox supplied a very good color corrcetion for Adobe, im using blackmagic hd extreme 2 now, seems it doenst grade color very well compare with matrox, i wonder, any decklink u guys using that grade color very well? Im newbie in color no matter in FCP nor COLOR. Thanks for help guys

    What is this footage that you are trying to color? The hardware used really doesn't matter in this case, all they are doing it outputting a signal to your monitor. How that footage looks and how far you can push it isn't dependant on the cards...it is dependent on the footage you have to work with.
    I know your English might be poor, so I hope you don't get lost.
    Read this first: http://en.wikipedia.org/wiki/Chroma_subsampling
    Now, if you have 4:4:4 footage, you can push it very far. Film, HDCAM SR, Viper...all sorts of high end HD can have this sampling. However, a more common high end format is 4:2:2, like DVCPRO HD, HDCAM SR, D5. If you shot HDV...HD on those miniDV tapes, then your chroma sampling is 4:2:0. You are missing information COMPLETELY. So HDV cannot be pushed very far when color correcting. DV is 4:1:1, so it too cannot be pushed very far. If you shot on those formats, there is only so much you can do.
    Shane

  • Best conditions for Color Correcting

    Hi
    If I'm color correcting at home, what are the best conditions to have in my room?
    Probably not near a window, daylight, even without direct sunlight seems to change things. Maybe not even direct lighting from lights.
    Any tips, suggestions?
    best
    elmer

    Hello elmerlang,
    Thanks for using Apple Support Communities.
    To calibrate your display follow the steps in the article below:
    OS X Mavericks: Calibrate your display
    http://support.apple.com/kb/PH13768
    Take care,
    Alex H.

  • CRT settings for color correcting?

    Hi. I am color correcting my showreel with FCP using an external CRT monitor. I am wondering about monitor settings regarding chroma, contrast, brightness etc. As a rule should all of these functions be set to 0 for best overall results? I am guessing there are additional variables to consider, but for standard TV viewing, is there a norm? Any input or discussion this may provoke is very welcome.
    Thanks in advance!

    YOu have to properly calibrate the monitor to color bars. Every monitor will be different...
    http://www.lafcpug.org/phorum/read.php?11,152712,170810#msg-170810
    Shane

  • Auto-select clip under playhead? (for color correction)

    Hi all
    Another newbie question concerning color correction in FCS2.
    When moving from clip to clip in the timeline, the viewer (which contains the 3-way color correction filter) doesn't refresh until I remember to double-click on the current clip to select it. In other words, if I change a filter on one clip, then move in the timeline to the next clip, the viewer still contains the previous clip's filter, and if I forget, I'll start fiddling with it, thinking I'm now looking at the current clip.
    Still with me?
    So, my question is, is there an "auto-select" feature whereby, as I move my playhead along the timeline, clips on a selected track (eg V1) will automatically get selected and loaded into the viewer?
    I know there is an auto-select feature for tracks, which I've enabled for my video track, but it doesn't seem to be meant for what I want.
    Thanks!
    Matt

    If you set the SYNC to OPEN, what is being played in the time line (and displayed in the Canvas view) will also be displayed in the Viewer.
    Just a point of clarification - the Viewer doesn't hold the CC filter, it will only display the filters that have already been applied to currently displayed clip. If the next clip displayed in the viewer has not had the 3way CC applied, the 3way CC won't display as part of the filters on that clip.
    Good luck,
    x

  • FCP export to Vegas for color correction

    I work in FCP, I don't have the best eye for color, so I'm having a friend do the color correction with a PC, using Magic Bullet and some other software. Rather than exporting the entire film, or entire scenes, which he'd have to go back and cut into individual shots in order to edit them all individually with their own color treatment, he has me exporting every shot from the film and exporting them to his harddrive or DVDs for him to work on. I've been doing it a scene at a time. It's incredibly tedious, very easy to screw up (if a shot goes a few frames long and under another shot, for example, it's out of sync, and if I forget a shot, mislabel a shot, get out of order when labeling them, etc, it's out of sync, etc), and I'm sure, at some point, I'm going to screw it up and it's going to be very annoying. Is there any more practical way to do this so that he has the markers, the shots are cut already, etc, but he doesn't have to reconstruct it from a thousand shots I've exported one at a time? I don't want to make him go back and make all the cuts himself, either, though that actually seems slightly easier to me.

    "I don't have the best eye for color" means I'm color blind. I don't appreciate the "learn the 3 way" comments. You can learn to drive a manual all you want, but if something in your brain tells you train tracks are highways, you're bound to run into trouble. And a train.
    The other editor lives an hour away, and he hates working on a Mac. He came here once and tried to edit using my system, but he couldn't get the hang of it. Add to that he came an hour each way to do that, and I had to pay for his gas, that made it very expensive, timely venture. It also means he'd have to have, say, at least 4 hours set aside each time he wanted to edit, to travel here and make it worth his time to do so. At home, he can do it anytime.

Maybe you are looking for