CS3 Bridge and CS4 on the same machine.

Hello Everyone,
I have adobe photoshop CS3 and Illustrator CS4 on my machine.  Any known issues for running bridge CS3 and CS4 on the same machine?  Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering.  Thanks for you replies.

Bridge is not really a stand alone product, and tuned to work with its current version of PS.  Also, Bridge CS4 has some features changed and/or added.  So if using CS3 Bridge you might have aspects that don't work with PS CS4.
I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version.  But use them as a pair as intended.  Also, only have one Bridge running at a time.
I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

Similar Messages

  • Any issues with Premiere CS5 and CS4 on the same machine?

    I want to install the trail version of Premiere CS5, but I want to know if I'll still be able to run CS4 if needed during the trial period, as well as after the trial period if I decide not to upgrade.  Does uninstalling CS5 mess up CS4 in any way?
    J. D.

    The only issue I've found was related to tape capturing. My Canon XH A1 footage stopped being captured when I installed CS5 as trial (However I've had it as trial for a few hours only). Once I entered the licence it started working again. This is the only thing! Don't uninstall Acrobat Pro if you do have it installed.
    This could have to do with the fact that as trial some codecs are not installed. Case in point is AME CS5, it is only able to export to a few formats as trial.

  • Can I install Web Standard CS4 and Design Standard CS4 on the same machine?

    Can I install Web Standard CS4 and Design Standard CS4 on the same machine?  My company purchased me a copy of one, and I have a personal copy of the other.  Wanted to make sure there wouldn't be any serial number problems in any case...thanks!

    Yes, but do a custom install to choose the apps to install to avoid any possibility of conflicts.
    Bob

  • Designer 6i and 10g on the same machine?

    I have Designer 6i and corresponding repository on my machine.
    The problem with 6i I can't save diagramm in HTML format
    I believe I can save in HTML format in 10g or other?
    Can I install on the same machine 10g designer?
    should I configure new repository?
    TIA

    See my update on your earlier question.
    As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
    Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

  • What is the best way to have access to OSX and OS9 from the same machine?

    What is the best way to have access to OSX and OS9 from the same machine?
    Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
    G5   Mac OS X (10.4)  

    And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

  • Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

    I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished.  For the moment I just need some "high level" guidance, little details can be worked out once I know
    which direction I will go.  I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time.  DFS can stay installed for maybe
    future purposes but clearly I wouldn't need the DFS Replication with only one machine.
    Here's a few details of the environment....
    1.  DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present.  But likely they will be gone and the DFL elevated before I start on the File Server project
    2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server.  Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
    and maybe the same IP if not too much trouble.  This way the existing shortcut would continue to work with the new 2012R2 File Server.  The UNC path represented in that shortcut is also configured into one or more of our major business applications,
    futher emphasizing the need to keep the UNC path the same throughout the process.
    3. The facility runs 24/7/365 but is "light" on weekends.  The political environment is such that there is little to no tolerance for any down time at all.
    4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
    Thanks for any suggestions.
    Phillip Windell

    Hi Sharon,
    I've done some more reading and have a few new ideas to run past you....
    Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
    to flip over to the new server.  DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
    the old server to 2003R2 first.  As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
    Thanks for the reg info on the Shares.  I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job.  I'll probably export that Key as a
    safety move whether I use it or not.
    Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
    1. Remove the DFS Replication Object (optionally remove DFS Services completely)
    2. Rename the old File Server to something else and set it to DHCP
    3. Rename the new File Server to the name I want to use and give it the IP the old server had.
    How does that sound?
    Phillip Windell

  • Is it possible to run VLM and lmtools on the same machine

    hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
    the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

    Hi SvenNittmann,
    in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
    Volume License Manager on a Virtual Machine - National Instruments
    http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
    I also use VLM in a virtual machine and I could recommend you the same solution.
    Regards, Stephan

  • Can i run 9ias versions 1 and 2 on the same machine

    i need to install 9ias versions 1 and 2 on the same machine but in separate databases, is this possible? if it is possible are there any issues that i need to be aware of?

    You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
    *http://portableapps.com/apps/internet/firefox_portable#legacy
    *http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

  • How to install iFS and iAS on the same machine?

    I have successfully installed iFS on a Windows NT 4 machine. Now, I would like to install iAS Enterprise Edition on the same machine. The installation guide for iAS says that I should first deinstall all products from the default ORACLE_HOME. I have not found a clue as to what to do if I want to keep the software already installed.
    Would it work if I tried (after installing iAS) re-install iFS using different ORACLE_HOME directory?
    Is there a white paper or any other document that would clear up the issues involved in installing Oracle products in ORACLE_HOME?
    Thanks a lot,
    Marek

    You can install IAS on the same machine that Oracle and IFS are on. Install IAS into a new Oracle Home (i.e. D:\IAS).
    This worked for me.
    I am still waiting to hear how (look for my post about 20 below yours) how to configure IFS to use the Apache Web Server that is part of IAS.
    Good Luck.
    Maybe one of these days Oracle will create an IAS discussion forum. This is my third request and I haven't heard anything back from them yet.
    null

  • Developer 1.6, 2.1 and 6i on the same machine does not work

    I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
    Is trying to find it in the path of the Developer 2.1 and of course it does not work.
    The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
    It is possible some workaround even if running one version at a time.
    Thanks.

    I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
    Is trying to find it in the path of the Developer 2.1 and of course it does not work.
    The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
    It is possible some workaround even if running one version at a time.
    Thanks.

  • Cs2 and cs3 and cs4 on the same pc xp? could be a mess up?

    Hi
    i have some questions
    i bought cs2 some time ago , i guess 4 years but now i don't remember
    and i did installed on my pc ,  never had a problem
    after when cs3 come out , i tried the trial version , the first time i did  not like it , but after 2 weeks , i liked and i need it for camera raw
    i upgraded my cs2 license
    well the point i donwnload the trial version of cs4  (english version , because most of the tutorials are in english) while cs2 and cs3 are in my language
    i tried to make a custom install (i did not install all the comonent)
    something went wrong ,when i tried to uninstall cs4 , i don't know but cs4 did not uninstall all the components (the uninstaller keeps adobe color Na, Ja, Eu, color common setting and cmaps)
    i downloaded the cs4 cleaner for adobe page , but the adobe cleaner for cs4 was not able to clean these components, it tried to clean cs3
    well i  had to use windows installer clean up manually
    delete every thing that is related to cs4
    uninstall cs3 and re-install it
    so after this mess, i ask if i can keep cs2 cs3 and cs4 (i think i will buy or upgrade) in the same pc running xp?
    my second question
    2) after updating cs4 , run the cs4 update utility and update all the cs4 components , cs4 seems to be more fast then cs3 , still on old pc with a powerfull machine like a p4 3.6 with 2gb of ram  and a good graphic card pci express
    is my feeling ? is the cs4 more fast then cs3 on not fast pc , isn't it?
    thanks too much
    and have a nice day

    thanks John Joslin
    CS4 is faster than CS3 on a computer which supports it.
    which are the computer that supports it ? i run xp
    why did the uninstaller do a mess up ?
    thanks

  • Using CS3 and CS4 on the same computer

    I have CS3 and have used it for about two years completing many projects and I am considering upgrading to either CS4 or CS5.  When and if i do this will I have to delete CS3 and replace it with the newer version or can they both remain functional on the computer?  And how compatible are the projects, can you open a CS3 project in CS4 or CS5 without issues?

    CS5 will ask to convert and save new copies of your CS3 and 4 projects when you open them. They will work in CS5, but they will not be backwards-compatible.
    And how compatible are the projects, can you open a CS3 project in CS4
    or CS5 without issues?

  • Can you run CRXIR1 and CRXIR2 on the same machine?

    I have CR XI R1 Developer edition installed on a workstation which I use to maintain imbedded reports in a large system written in VC++ V6, as well as several newer applications written in VB2003.  The IT department issued me a new machine on which is installed VB2005.  Now I receive errors in my VB applications when using the ExportToDisk function.
    I understand that I need to upgrade to CR XI R2 to be compatible with VB2005.  How will that affect my older code written in VC++ V6?

    Well, you don't really need CR XI r2 to be compatible with .NET 2005 as .NET 2005 ships with CR 10.2. Now, if you want to be at CR XI with the COM apps (VB and C++) as well as .NET 2005, then you do need CR XI r2. (CR XI does not have assemblies for the 2.0 framework)
    Personally, I would not recommend CR XI r1 and CR XI r2 on the same computer. Theoretically this should be OK, but from experience, I find that occasionally CR XI r1 and CR XI r2 just don't like to play together...
    I'm not sure where you want to go with this now; resolve the export error, then move on, or?
    Ludek

  • SSO between WebDynpro and Servlet on the same machine

    Hi,
    I have an WebDynpro application running in our portal which makes some calls using RFC to a backend system. The RFC connection is obtained using DestinationService and SAP Logon Ticket is used for authentication.
    This app should call a servlet on the same instance which also uses RFC to get some data from the backend.
    Now, wenn I call the servlet from the WebDynpro, the exception java.lang.IllegalStateException: No SAP logon ticket found comes up. Does anyone have an idea how to configure the servlet-webapp to accept logon tickets?
    Thanks in advance
    Thorsten

    this must mean that your windows drive is formatted NTFS. NTFS drives are not natively writable from OS X (only readable). However, you can install Macfuse and [NTFS-3g|http://macntfs-3g.blogspot.com> (both are free) to make them writable.

  • Installing Oracle 9i Database and 9iAS on the same machine

    I have read conflicting comments about this. Will Oracle 9i and 9iAS work if installed on the same server ?
    I have seen a note before that the ORACLE_HOME will conflict if done.
    However, for 8i it has been stated "the OAS does not seem to conflict with the Oracle 8i database, so select the default ORACLE_HOME to install".
    Can you give me the diffinitive answer for 9i for this.
    Many Thanks

    I performed the installation and used a different Oracle_Home and had no issues. Now configuring Portal was another story...

Maybe you are looking for