CS3 crashes on files created with CS.

Hello,
recently we upgraded InDesign CS to CS3 (Adobe Creative Suite 3 Design Standart) and we can't open old CS files, it just crashes. Is it supposed to be so?
Thank you,
Dj_Lord

I can open file with CS and CS2.
File history:
Created on Windows 5.1 in app version 3.0.0.72 (FS InDesign Roman) build 72
Save As on Windows 5.1 in app version 3.0.0.72 (FS InDesign Roman) build 72
... the same ...
Most recent Save on Windows 5.1 in app version 3.0.0.72 (FS InDesign Roman) build 72
INX file in CS3 gave error:
Cannot open the file "file.inx". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application.
I deleted two unused styles, but that didn't help.
I created blank A4 page in CS and I can't open it in CS3, wtf...
Crash info:
AppName: indesign.exe AppVer: 5.0.3.662 ModName: public.dll
ModVer: 5.0.3.662 Offset: 000ae849

Similar Messages

Can't open DNG files created with Mac CS5 downloader in Mac CS4 Photoshop

I recently installed CS5 on my mac but I kept CS4 installed as well. I notice that I cannot open DNG files created with CS5 in Photoshop CS4. Bridge CS4 shows the files only as icons - no image thumbnails. I am able to open these same files on a Windows version of CS4. Is there some plugin for my mac CS4 that will enable me to access the DNG files created with CS5? Is there a way to use my CS5 downloader when converting my raw files from my camera to DNG files that will make them compatiple with PS and Bridge CS4?

rr3rd wrote:
Is there a way to use my CS5 downloader when converting my raw files from my camera to DNG files that will make them compatiple with PS and Bridge CS4?
Well, yes...but you'll need to modify your DNG Converter prefs to allow for that. You''ll need a recent (ideally current DNG Converter 6.4.1 or above) and click on the DNG Converter preferences and select the correct DNG Converter options. Check DNG Converter 6.4.1 (the current version) and click on "Change Preferences" to be sure select Camera Raw 5.4 and later then make sure CS4 is updated to ACR 5.7 (which is the last version of ACR for CS4) However, the changes made to ACR 6.x really should be adopted since IQ for ACR 6.4.x is a lot better...

Captivate File Created with Trial Will Not Open in Paid for Captivate

I have a file created by Trial version of captivate. It was created in a different computer. Now, I have to make some modification in the file. However, when I tried to open it with Captivate 5.5, I got the error shown below. I am not able to use the popular solution provided in this link Click here to view because the file was not created in my computer. I believe that there is a lock on the file since it was created with Trial version of captivate. Is it possible that I send the file to a representative, and they look into it?

Was the file created with the same version? You talk about 'trial', but the only trial version available at this moment is Captivate 8. You were never able to open a Captivate project in a previous version, that explains why you cannot open it in 5.5.

File created with Trial version cannot be opened by Captivate 5.5 (Ensure that the file isn't open, the file isn't damaged....etc.)

Hi,
I have a file created by Trial version of captivate. It was created in a different computer. Now, I have to make some modification in the file. However, when I tried to open it with Captivate 5.5, I got the error shown below. I am not able to use the popular solution provided in this link Click here to view because the file was not created in my computer. I believe that there is a lock on the file since it was created with Trial version of captivate. Is it possible that I send the file to a representative, and they look into it?

Was the file created with the same version? You talk about 'trial', but the only trial version available at this moment is Captivate 8. You were never able to open a Captivate project in a previous version, that explains why you cannot open it in 5.5.

DNG files created with LR4 do not show thumbnails

Hi,
When using LR3 to create DNG files from my RAW files, those files would show me thumbnails of my image in Windows Explorer. I am running Windows/7 (64) and have installed a CODEC from "Fast Picture Viewer" that allows thumbnails from RAW & DNG files to be shown. It seems, however, that the thumbnails do not show for DNG's created with LR4.
To Remedy this I uninstalled the CODEC. Downloaded the most recent version and installed it but this did not fix the problem.
I then went to the user forum for the CODEC product and searched for my problem. I found a thread who's solution is to turn off "Embed Fast Load Data" when exporting to DNG and it fixes the problem. I tried this and indeed it did fix it. The responder went on to say ".....When this option is enabled the files created are no longer DNGs (just an undocumented private format of Adobe that no one else can read to this date)". This statement surprised me as it is counter to what I understand Adobe created DNG to be. Can I get some input on this comment as if true it is very troubling.
My second question is that I see where to turn off the "Embed Fast Load Data" in the LR Export module, but where do I do the same thing in the Import module when I'm selecting import mode "Copy to DNG"?
And, my thrid question is this. If indeed the DNG files created by LR4 are proper DNG files and this CODEC is just flawed in some way, does anyone have a better way to allow image thumbnails to be shown in Windows Explorer?
Thanks -- Dan

Hi David,
You testing does not coincide with mine. I have consistently kept "Use
lossy compression" turned off. With lossy turned off, it seems that using
Fast Data Load prevents the thumbnails from displaying whereas turning off
"Fast Data Load" allows the thumbnail to be shown.
Below is comment from Adobe confirming that they have yet to release the
spec containing "Fast Data Load".
From: Ian Lyons [email protected]
Sent: Tuesday, June 05, 2012 12:29 AM
To: Califdan
Subject: DNG files created with LR4 do not show
thumbnails
Re: DNG files created with LR4 do not show thumbnails
created by Ian Lyons in Photoshop Lightroom - View the full discussion

Video from .ts files (created with Arcsoft Showbiz) played in accelerated.

Hello everybody, can you explain me why in PREMIERE PRO CS6, the video from .ts files (created with Arcsoft Showbiz) is played in accelerated while the sound is played normally ?
If it is normal, an update would be great
Thank you.

>imported from vhs (with Hauppage Colossu).
As far as I know, the best way to digitize vhs tapes is with a http://www.grassvalley.com/products/converters product
Model 55 is one way from tape to computer, model 110 allows exporting back to tape
Files are DV AVI which edit very well in all versions of Premiere

Importing movie files created with SONY HDR-TG5

Having trouble importing movie files created with this camera. Have had success importing direct from the camera using streamclip, but struggling with old files imported from our PC. These files have these two extensions; .modd and .m2ts

Eric:
Thank you. MPEG Slipstream worked great.
Do you know if there is software available that would let me see what is in/copy the files in the Sony folder so that I might be able to copy the disk directly instead of having to copy the files off of it with Handbrake? Would having the QT add-on for the MPEG-2 playback component be helpful?
Thanks again
Tim

Nokia 3500 classic - .rms files created with junk ...

I have purchased a Nokia 3500 classic in July 2008. I am using 1GB memory card and installing applications on it.
Recently I found that though my memory card's capacity is 1GB, the space utilised was shown as 3.4GB. I was stunned. Then I opened the memory card in computer via usb cable and found that there are lot of .rms files created with junk characters file names and i am unable to delete the files. The only option left to me was format the memory card and I went for that. After formating, I again installed three applications and again i found that the file size of the application itself is increasing by some KBs.
I have scanned it but no virus found.
Why this is happening and what is the solution for it. Please help.

it are the settings of the app(i think) so thas what thay are and the junk charecters make it hidden for EVRY SINGLE FILE MANAGER FOR J2ME(cell phone app)
vinayshah wrote:
I have purchased a Nokia 3500 classic in July 2008. I am using 1GB memory card and installing applications on it.
Recently I found that though my memory card's capacity is 1GB, the space utilised was shown as 3.4GB. I was stunned. Then I opened the memory card in computer via usb cable and found that there are lot of .rms files created with junk characters file names and i am unable to delete the files. The only option left to me was format the memory card and I went for that. After formating, I again installed three applications and again i found that the file size of the application itself is increasing by some KBs.
I have scanned it but no virus found.
Why this is happening and what is the solution for it. Please help.

After Effects CS6 connot open files created with CC 12.1 Mac version

After Effects CS6 connot open files created with CC 12.1 Mac version. Is there an update?
I am running Windows 7 Pro and Adobe CS6 Suite with all updates

You are never able to open projects from one version of After Effects in an earlier version. This has always been the case.
You can use the command File > Save As > Save A Copy As CS6 to save a version of the project from After Effects CC (12) that can be opened in After Effects CS6 (11).

Is there any simulator to test ipad iphone ipa files created with Adobe Director 12?

Is there any simulator to test ipad iphone *ipa files created with Adobe Director 12?

No. Luckily it is very quick to compile and test on the iPad. I've watched people using Flashbuilder and it seems to be a much more complex process.

Usage limitations on files created with CS6 beta?

My gut tells me that the cs6 beta falls under the cs6 license sections "Non-Serialized Software" and "Evaluation software" which state:
"...for demonstration, evaluation, and training purposes only, and only if any Output Files or other materials produced through such use are used only for internal, non-commercial, and non-production purposes."
Am I correct in assuming that this applies to all files created with the cs6 beta? I don't see this discussed anywhere which makes me wonder. I have made some nice progress on one of my files and now I'm wondering if I have to stop and redo everything in my old version. I don't want to sink much time into the beta if nothing I create is publicly usable.
Official clarification would be appreciated.

It's completely awkward that I haven't realised this so far, usually I export everything to PNG -> resize PNG with ACDSee -> convert to JPEG and then forget about it Thank you for clearing this up!

FM11 crashes when opening DITA files created with FM7.2

Hi all,
I am finding out new truths every day now about FM11 and DITA 1.2..
The latest problem: FM11 crashes (on all our computers) when trying to open existing DITA files. These were created with FM7.2 using the DITA application pack. FM11 is newly installed and uses its standard configuration out of the box. Win7 64bit.
No dialog opens, FM11 just hangs for a while, then dies.
I do not think that I will put much effort in resolving this and just maintain existing projects with older FM versions. So just for interest, is this a known bug?
Robert

This isn't a new restriction, but it does have to do with the structure app implementation in FM. In the FM app pack (and all DITA 1.0 or DITA 1.1 implementations that I'm aware of), the structure app was based on the ditabase model, which allows all topics in any order in the same file. But with FM's DITA 1.2 apps, they created separate apps for each topic type, which restricts the topics in that file to that type. If you open the file with the DITA 1.2 ditabase app (is there one?), you shouldn't have any topic nesting restrictions.
Regardless .. it shouldn't crash FM.
...scott

Dreamweaver 4 no longer working after downloading files created with MX

I downloaded files that were created with Dreamweaver MX to
my pc in order to update them for a new client. I've been using
Dreamweaver 4 and now I cannot even open Dreamweaver 4. Luckily I
also have Dreamweaver 8 installed and can view all the files in the
site from there, but what would have caused Version 4 to generate
errors upon trying to open? It starts to open and I can see that
the properties panel is disabled and then I get the error message:
"Dreamweaver has encountered a problem and needs to close. We
are sorry for the inconvenience." I've sent the error report to
MS...
Any thoughts other than to use Version 8 from now on? Since
I'm a designer, I do have quite a few client sites that I'd have to
reset the remote site info for...
Thanks.

a guess- you also downloaded the .mno design note files.
There should be a technote on this-
It talks about contribute 2, but it's same exact issue with
MX and newer
Dreamweaver 4 crashes on Contribute 2 sites
Issue
Dreamweaver 4 crashes whenever it connects to a site that has
recently been
accessed by Contribute 2.0, 2.01 (Windows) and Dreamweaver MX
2004.
Reason
Contribute 2 and Dreamweaver MX 2004 design notes on remote
server or local
site folder are not compatible with Dreamweaver 4.
Dreamweaver 4 tries to
read these files and crashes when it cannot.
steps to fix are next- link below.
Permanent Link:
http://www.adobe.com/go/tn_19048
or
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19048&sliceId=1
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

PDF files created with Primo PDF or Progeny PDF printer

I am working on a computer with Windows Vista on it and I now have a problem when I create a PDF using the Primo PDF printer, or the Progeny PDF printer -- if Adobe is already open with a file, the new file appears with fuzzy colors. When I close Adobe, the files seem normal. Any idea why this happens? Has anybody had the same problem?

Not a known problem. And the "already launched" problem points to an issue with Reader.
Please submit some samples with a bug report for Reader to debug.
Here is what the issue looks like (click to zoom) :
On the left side is the PDF file opened with no other instances of Adobe Reader open. On the right side is what the exact same file looks like when opened after another instance of Reader (displaying another PDF file) was already open.
It's as if the font rendering engine was incapable of multi-threading. Like Reader can only render the font properly if the PDF file in question is the only one it's got in RAM.
Worth noting :
Opening a 2nd PDF file with distorted fonts does not affect the first open PDF. That one continues to display normally. Only every subsequent instance of Reader will have this issue.
Files were saved normally via Photoshop CS5, although this issue has been present for at least 2-3 versions if not more (only started saving PDF's around that time - it's quite possible this was ALWAYS an issue).
This is strictly a SCREEN RENDERING ISSUE. The PDF file prints to paper just fine with uncorrupted fonts no matter how it looks on-screen.
As mentioned earlier in the thread, this happens across multiple computers. Whether I create the PDF via Photoshop CS3 in WinXP or via Photoshop CS5 in Windows 7 on a completely different computer... it will have the same issues. Tried it at work, too -- miles away from home. Same issues. Graphic cards are also from different makes, and display the same issue.
This happens to every single font in the document, regardless of how common or obscure a font it is. In this case, it's Helvetica Neue.
Again, because this important : even if the fonts look distorted on-screen, they will print out on paper just fine. This is a screen rendering issue.
Default PDF settings, no layers, vector data non-rasterized.
Hope this helps.

Can't open CS3 documents I previously created with CS3

I have InDesign CS3, says 3.0.1 when it opens. I have been using it for several years, but not for about 4 months. Suddenly I am unable to open previous projects I created with this program. I get an error message from the content manager the same as if I was trying to open a CS3 document with CS2 -- upgrade your plug-ins or get the new version. If I click on configure plugins, everything seems fine. If I click on update, it says there is nothing to update.

Let's assume you have CS3. Do you also have CS?
I'm not sure if you're on a Mac or PC, but are the files linked to open with the right program? I created this situation for myself (on purpose) to prevent myself from opening a clients files in CS4.
Could you be launching a previous version?

CS3 crashes on files created with CS.

Similar Messages

Maybe you are looking for