CS3&CS4 dosen't show file name when printing to a rip

Need help. I'm using the Xitron Rip. It appears that when I use Adobe CS3 and CS4 to output files to this rip, the filename doesn't appear in the que. It shows the printer type file name instead.
eg. : 4CTP-175Lpi-AT on 'LaserWriter
Any ideas?. I don't have this problem with CS2.

Sounds like you are using different settings. The file name would usually only appear if it is sent as a file to the printer, i.e. a pre-converted PS/PDF file. Otherwise it is simply a spool job with no specifics attached to it. Perhaps you changed the separation settings to be handled by Illu and it is converting the files?
Mylenium

Similar Messages

Ask for the file name when printing on XP x64

I have just installed my CS3 on Windows XP x64. Installation was successful and all is working fine. But there are few things which are working differently and I can not find any way to fix it.
One of the problems I have is that I can not have it so that I will be asked for the name of the PDF file created. It simply goes through and allocates name of the file used for printing. It happens for all applications i.e. Word, Excel, InDesign, Corel. In my automatic processes I realy need to be prompted for the file name / location. Is it possible to modify some settings to have it under XP x64 ??? I hope it is.
Thanks for advise.
Tony

I would like to add few details which may help to find the source of the problem.
When I will select Adobe PDF as a printer, then click on Properties and select
Prompt for Adobe PDF filename
in Adobe PDF Output Folder then printing starts and will not progress at all. If I will change the Adobe PDF Output Folder to local it prints OK but is not asking for the file name / destination.
How I can have it printing and asking for the file name / destination ? Or maybe on XP x64 it is not possible at all ?
Regards,
Tony

Can I include the FILE NAME when printing from Bridge?

I'm a commercial photographer. I shoot with my camera tethered to a Mac laptop to view images immediately as I shoot. I use Bridge to view these images.
As I shoot, we save the file by product name, and then print proofs immediately. I need to include the File Name on these prints. Is
there a way for me to do this directly from Bridge? If not, can you think of a way using Photoshop? Or anything else? Lightroom?

Guessing you are using Bridge CS4 you could use the Adobe Output module for
this. It is reachable through a seperate workspace in the top menu right
side or the left side top menu the icon most right.
You can create different lay outs as a PDF with this but for you it should
be one per page and select the filename (with or without extension). Just
explore the posibilities. For CS4 you could use the updated Output Module.
If on CS3 you could use the contact sheet script for Photoshop that in
Bridge can be reached by the menu Tools / Photoshop / contactsheet. This
contactsheet script is also usable for CS4, it is on the Goodies install
disk for PSCS4
As I shoot, we save the file by product name, and then print proofs
immediately. I need to include the File Name on these prints. Is
there a way for me to do this directly from Bridge? If not, can you think of a
way using Photoshop? Or anything else? Lightroom?

How can I prevent Firefox from cutting off the title of a webpage for use as a file name when printing/saving as PDF if there's a / in it?

Like it says in the question - when I try to print/save a webpage as a PDF, Firefox (version 36.0, Windows 8.1 64bit, German) usually uses the page's title as the file name. Slashes are, of course, not allowed in file names, but instead of just leaving leaving it out or replacing it with a hyphen, the title is cut off and everything before the last slash is gone, which in some cases results in very odd and misleading file names.
Is this a known bug? I couldn't find anything. So I'm just wondering if there's either going to be a fix anytime soon, or whether there is a simpler solution than to generate a different title sans slashes specifically for Firefox users.
Thanks in advance for Your help!

There is more than one proxy type.<br />
Only an anonymous proxy will hide the IP and build two connections, one between you and the proxy and a second connection between the proxy and the website that uses an IP from that proxy.<br />
A normal proxy merely passes all traffic without affecting it, so websites see your IP in such a case.
*http://en.wikipedia.org/wiki/Proxy_server

Indesign CS4 "forgets" file name when saving as Postcript file.

Like the title says Indesign CS4 "forgets" file name when saving as Postcript file.
Example:
I open up indesign CS4 and open up a file called "test5". Then I go to the print menu and save it as a postscript file. Once the save as dialog box comes up it wont say "test5" but it uses whatever file name I used last time I created a PDF.
I want indesign to recognize that when I create a postscript file that I want it to be named the same way as my file that is open at that moment. Changing the file name every time is not bad when they are called "test5" etc but here at this company we use super long file names and it's a pain to change it every time.
Funny thing: Some machines here do it the way in the example but other machines will do it the correct way by using the same name in the save as box.
Any suggestions on how to fix this? If something is not clear just ask!

How about this - it's a workaround, I can't change ID or your system.
I'm big on EXACT filenames also, case and space sensative. Do a "Save As" before printing - the file name should be correct and highlighted, ctrl+c copy, escape/cancel the Save As. Paste in the filename during the Save as Postscript File.

Show file name

Is there a way to show file names with the events, in the event library window?

Sevy2205 wrote:
... I imported a large number of files and I want to make sure I have them all and they are some I want to identify quickly, I am looking for a way to see the file name in the event library....
that is beyond the CONCEPT of this 15€ consumer product
iM is meant for camcorder-imports - cams give automatic file-names with very little information (clip001); the more important info are in the meta-tags (when, perhaps where, after analyzing who, what) .. so, from the intended perspective of this app, there's no need/function to display clip-names.
the EVENT-concept structures on time-stamp, based upon the assumption, you record your movies on some 'daily' basis, think of vacations, city-trips, holidays ...
for your workflow, using 'files', I would suggest to prep all files in Finder, create folders, re-name them, arrange them (you do know, in Finder hitting Space-bar when a file is selected, it shows a preview? video as motion pictures?), whatever to structure them, THEN import to iM for editing.-

Same file name when downloading new pics

The prev camera I had (Sony Cyber shot/Steady Shot?)always kept dynamic file numbers/names however now have Nikon D90 and now if do search on a file number now get numerous pics under same file name as new camera restarts at same number all the time.
Is there an easy way to deal with this. I would really not want to have to rename all files as soon as I download them. That can be over 300 pics at a time.
Any help would be greatly appreciated! Thanks!

When I say file name I mean the name/number that appears under the pic in iphoto.
Yes that is the file name
Do most people leave these numbers or change them, do you know?
Most people leave it - some preprocess all photos and assign meaningful file names and then import
I know you can assign words to them and then retrieve them by calling up all pics associated with that word(s).
You can assign a title (which can optionally be used as the file name when you export photos), a description, keywords, and a rating
Do you have any other hints for me? Do you use the Mangler software you referred to in the prev post?
Normally I do not modify the file names - if I get photos from someone else I usually use name mangler to identify the source (which I could do with keywords but for photos that are not mine I prefer having the file name show the source) - once in a while I will change some but normally I just import directly from the camera and ignore the file name
LN

How do I get my photos to sort by file name when sync'd to the iPad?

How do I get my photos to sort by file name when sync'd to the iPad? The default sorting method changes the order of pictures when sync'd from my pc.

http://support.apple.com/kb/HT4221

How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard

How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard, please see the attached screenshot for a clearer explanation.
I understand that if we prefix all files with leading zero's this will probably resolve the issue but I just wondered if anyone new the answer. The ironic situation is that version 6 has no problem.
I have spent over an hour with techincal support who were unable to provide me with an answer

It is not clear how you are trying to do the order. Have you tried to select a set of files and then use the arrow buttons to move them in the list? If you select the heading, that will typically reorder the files by that heading and undo everything you had done before.
You should be able to select groups of files and move them up and down in the list. All of those options appear on your view, so what is the real question?

Ipad only uses one file name when uploading images via email

We have an image tool that uploads images to a template website. The problem is the file names for these images must be unique any duplicate file names will be rejected. Some of our users want to be able to upload from the field but Ipad only assigns the file name "photo.JPG" to jpegs. It doesn't seem to include the sequential extension that actually does exist for the image on the file name when uploading. Is there a way to get ipad to do so, or is this something that Apple maybe want to consider looking into. I can easily see the average Joe emailing themselves images and hitting save only to replace and lose an older image because let's face it, not all users are on MACs and PC's do not allow multiple files to have the same file name in the same folder.

Hi,
Based on the description, you could send email to external addresses without the Twin Oaks software. However, with the Twin Oaks software, you couldn't send successfully.
For this issue, I recommend you enable message tracking and check whether you could retrieve message tracking log entires when you send emails to external addresses through the Twin Oaks software.
If you couldn't retrieve message these tracking log entires when you send emails to external addresses through the Twin Oaks software, it means that the Exchange server is OK and the crux of the problem is the Twin Oaks software.
Here is an article about message tracking log for your reference.
Get-MessageTrackingLog
http://technet.microsoft.com/en-us/library/aa997573(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Keeping file names when rendering out DPX to QT

I am trying to convert a dpx sequence to a quicktime to use for offline editing. When I export the files it does not keep the original file name. It replaces the file name with 1_g1, 2_g1 and so on. I cannot find a way to tell color to keep the orginal file name on export. I still new to Color , but I am quite familiar with encoding programs. Is there really not a way to keep the meta data including the original file name when exporting files?

There's a Chapter on this in the online Color Help...

Copy&paste file names when bouncing

too bad, after upgrading to 7.1.0 it is still impossible to copy&paste file names when bouncing, as was no problem in LP6! That´s very time consuming for me, because for film music I usually have long file names that contain smpte codes. Does anybody have a shortcut?

Hi Orbanl, I was going to post this myself and then found your post so will add to it.
'It used to be in Logic Pro 6 that normal copy/paste worked in the 'name' field of the save and bounce windows (even kept them seperate as far as clipboards went). Now, in Logic 7.1 the only way I can initiate a copy or paste when saving the song or naming the bounce is a right mouse click (cntrl-click)? to bring up these options. Are there no key commands for the navigation services anymore? This is a huge time killer for me as I often save 60~100 files with the same root name and was able to quickly initiate and save/bounce without stopping to pick up the mouse (now I have to switch back and forth between the keyboard and mouse to initiate, name copy+paste and modify name). Thanks in advance.'
Over at the Logic Pro Forum, Peter suggested in response to this post that the Pro App Support update v3 might have something to do with it as his Logic 10.3.9 DOES support normal copy/paste commands! Unfortunately I am running 10.3.8 and the Pro App update v3 specically notes 10.3.9 as its requirement. The only reason I have not upgraded to 10.3.9 is I use a lot of esoteric shareware music software and I understand 10.3.9 had some 'sprinkling' of Tiger in it that at least for several friends of mine broke older app's that were running fine in 10.3.8.
Here is the link if you are running 10.3.9.
Pro Application Update 3.0

How do I get the file name to print up closer to a horizontal photo?

Kind of a nit-picking question, but here goes anyway:
I use Lightroom's Print module to create contact sheets (three rows by three columns). I check the "Photo Info" check box and select "Filename" to have the file names printed with each photo. When the photo is shot vertically, the file name prints at the lower edge of the photo, as you would expect. However, when the photo is shot horizontally, the file name still prints down in the same place where it would print if the photo were vertical. That can be confusing because if the next photo down on the sheet is vertical, a file name can end up being much closer to the vertical photo below it--to which it is completely unrelated--than to the horizontal photo above it, to which it actually refers.
Is there any way to get Lightroom to print file names closer to horizontal photos?

Thanks to both of you for your speedy responses. Making all the shots horizontal or vertical (i. e., unchecking the "Rotate to Fit" box on the right) is not what I want. Increasing the vertical spacing is a possibility, but that'll make the vertical shots smaller. There's a program called "ImageBuddy" which does exactly what I want LIghtroom to do in this instance: print the filenames of only the horizontal shots higher and therefore closer to the photos to which they refer. It's quite cheap, but I'd rather not use Lightroom for everything else and ImageBuddy just for contact sheets, so if anybody knows of a way to do what I want to do within Lightroom, please do clue me in.

Separator page prints out with wrong name when printing from Outlook 2010

Working with Windows 7 Enterprise, Outlook 2010. We've set up our desk printers to print a separator page with the user's name, as several people use the same printers in our building. Printing from IE, Word, etc. all work fine, and it'll print
out the correct username on the separator page.
When anyone attempts to print an Outlook email, it instead prints out my username. We've found that it doesn't happen if they click on the "quick print" button, but it happens every time if they do "file > Print" or Ctrl+P.

Hi
As per the information and details provided by you that separator page prints out with wrong name when printing from Outlook 2010, please follow these steps: -
To create a custom separator page file, use a text editor such as
Notepad. On the very first line, type one single character, and then press
Enter. The character on this line defines the character used as an escape character. For example, the following list assumes that this character is the at sign (@).
Enter the escape codes for the functions you want, and then save the file with an .sep extension in the Windows System32 subfolder.
In the Print Manager, select the printer that you want to use the separator page file with, and then click
Choose Properties on the Printer menu.
Click
Details, specify the name of the desired separator page file in the
Separator File box, and then click OK.
Note:
Put the custom separator page file in one of the following locations:
In the %Windir%System32 folder.
In a folder whose path contains a SepFiles folder. For example:
Drive:\Folder\SepFiles\Subfolder
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

How do I get the cells to show up darker when printing my document

When using Numbers, how do I get the cells to show up darker when printing my document?

Are you asking about the cell background, as ivmedic has assumed, or about how to make the grid lines separating the cells darker?
Select the table.
Use the controls shown above this table to change:
Stroke type from "Thin" to the solid line shown.
Stroke thickness to 1 pt
Stroke colour to a darker value (This is set to black, the rightmost cell in the top row of the Color Palette available fir this Color Well.)
the controls are toward the right end of the Format Bar.
Regards,
Barry

CS3&CS4 dosen't show file name when printing to a rip

Similar Messages

Maybe you are looking for