Cs3-cs4 upgrade clips out of synch

Working on a cs3 PPro project, going very well! Updated to SC4 to take advantage of its improved 3D modeling capabilities. However I note that now my sc3 project, once set up in cs4 is now out of synch. Edits aren't where I placed them - I assumed you could transfer cs3 to cs 4 no problems.

Normally, CS3 Projects do translate to CS4 Projects well. General wisdom is to complete in the version that was used to start, but I see your point on wanting to move up here.
Maybe give the specifics of this Project and its Assets, as there could be something there.
Also, did you Open the CS3 Project into CS4, or did you Import it. Might want to try the other way, depending on what you did.
Good luck,
Hunt

Similar Messages

CS3/CS4 Upgrade

I installed CS3, I then bought a copy of CS4 upgrade and started to install it.
Part way through, when it asked for CS3 serial number the only product option was CS3 Extended. I then realised that the upgrade copy I had bought was CS4 Extended upgrade.
I then aborted the upgrade.
The splash screen on CS3 about Photoshop now shows it as CS3 Extended even though it is just the normal version.
I bought a normal version of CS4 upgrade but it will not recognise the serial, it wants a valid CS3 Extended serial.
I uninstalled CS3 & CS4 Trial and then re-installed CS3, still the same problem with the solash screen showing it as CS3 Extended.
If I uninstalled CS3 again and deleted all registry entries to Photoshop would this solve my problem?
I have also tried the Adobe cleaner tool but this still left registry entries for Photoshop

If I uninstalled CS3 again and deleted all registry entries to Photoshop would this solve my problem?
Not at all. You need to delete the PCD database and any otehr asociated licensing and product identification files or simply manually deactivate everything, choosing to eradicate any stored serial numbers. Still, it wouldn't do anything for you, if you still had the wrong serials. Therefore do the only sensible thing - call phone support to sort this out. Nobody here can do that for you.
Mylenium

Clips out of synch until I pause them?

I have a new iMac (specs in my profile) that has a strange issue. When I start playing a clip it's out of synch. If I pause the playback and then start it again, it's back in synch.
This happens every time. I thought it might be a hard disc going to sleep but I have it set not to.
This happens whenever I've stopped playing back for a couple of minutes. SOMETHING'S going to sleep, I just don't know what.
btw, I have the app on the internal SSD and the media on the internal hard disc.

Jennifer, the only way we can have any chance to successfully troubleshoot problems remotely is if you approach this in a systematic manner. If you don't understand any of the questions, let us know. StudioX asked what the signal path is. go to view: audio playback to see what the setting is.
You might try resetting your fcp preferences:
https://discussions.apple.com/docs/DOC-2491
Do you have any 3rd party utilities installed on your system, in particular anything that might have an impact on audio? Do you have any 3rd party fcp or audio plug ins installed on your system?
You might try creating a new account and see if that makes a difference:
system preferences: accounts.

CS2, CS3 & CS4 upgrade questions

Is it possible to have both CS2 and CS3 installed and functional on the same Windows machine at the same time? Same question with CS3 and CS4 and, if it can be done, are there any known issues that result?
I need to migrate our graphics station to the newer CS3 (and eventually CS4 ... probably around the time CS10 is released), but I can't afford to lose access to projects during the much slower than normal process of getting the newer version fully ready to go (i.e., all plugins and the many custom files they use within my projects accessible by the newer version). Sorry for the 101 question ... I work in corporate video now and our facilities are way behind the curve so I have now become that way too.

As Navarro said: Should be no problem. Be aware, though, that several of the "Edit original" and "Open in Bridge" type functions will always resort to the most modern version and these functions thus will not work fully in older versions. If e.g. you chose to "Browse Presets" in AE CS3 with CS4 already on your system, it would open Bridge CS4 and you would be able to view the presets, but could not apply them with a double-click as you would otherwise. Also expect some confusion when working with MPEG stuff. You may get warnings about missing CoDecs in Encore and Premiere or weird licensing warnings ("not included in trial version" and such...)
Mylenium

Clips out of synch on timeline

I've been editing a film for several months now, and frequently when I open it up I find that the clips on my timeline are all discombobulated. They're moved to different spots, the lengths are all screwed up, and video and audio tracks are often separated and quite far apart. I know I didn't do any of these crazy things. Anybody else ever encounter this problem? It's unbelievably frustrating, especially when I have to go back through THE ENTIRE PROJECT and reset everything.

Um...yes, I'm sure. I'm the only one here. And this is not a joke or anything, it's really happening, and it's driving me insane. If it happens again I really might have a nervous breakdown. Okay, maybe not really, but I'll be thoroughly aggravated.
Anybody have any ideas?

Audio out of Synch in Prem Pro CS4 after editing in Soundbooth

This is using the Mac version of Premiere Pro CS4 and Soundbooth. I Premeire, I choose to edit the audio portion of a clip in Soundbooth. In sound booth I just add some compression or other sweetening and save it (only adding effects no cutting of the audio or anything). When I save it and go back to Premeire, the audio is out of synch. Also this seems to happen intermittently not everytime.
Any ideas?
The audio in premiere is part of a video clip and is 48K 16bit.

Good morning Lynn,
I doubt this will help, but whenever I have issues importing tapes, I try
something else. I double check the software's manual because
sometimes, even if I have done the same thing several times, I add
or miss something. If that does not work I close the program and restart
the computer and camcorder and try again ... with a different tape. If
that doesn't work I use a different program. I use an old HP workstation
I paid $99 for on Ebay that's running XP and I capture with Scenalyzer.
Then I copy file to a USB drive and input to Premiere. Sorry, I figure the
problem is me, not the hardware or software and it usually is me because
when the next project comes along PP usally imports fine.

PREMIERE PRO cs3 & cs5 - audio out of synch by 6 frames after export

i have never had formal training on adobe premiere, and therefore when i am working with my students it is basically down to expereince i have gained by myself.
with cs3, we always worked on the basis that it would always export the audio out of synch with the video by 6 frames so they would routinely have the audio tracks on two separate tracks, one for editing and one for exporting which was offset +6 frames.
when we made the transition to cs5 and new kit i was stunned to see that the synch issues were still there. and since a quick google yielded very little evidence that others shared this issue i thought it must be something i am doing wrong after years of bad habits learned on the fly.
so here is my workflow, where am i going wrong and why is it always out of synch?
open cs5
choose an editing format. (this varies but the synch issue is always the same)
import content
edit
export (normally as a microsoft avi, with no compression which i later convert into quicktime compressed with ANIMATION)
i teach on an animation course so normally the content we import is a sequence of stills such as jpg or tiff, but we also capture stuff on dslrs too
the timeline colour is normally yellow, which is fine at standard def, but larger def we will render workspace to turn it green
the editing format depends on our target format. the current project is 720 hd
the export as avi with no compressor i suspect to be a weak link in this work flow, but the problem remains if i export as anything else so....
now as an additional point on the matter, the current project we have had people miming to an audio clip which we played live for their performance. the audio blips were aligned on the timeline with the audio blips from the edit
but after rendering out, the footage is out of synch by 6 frames. it has always been this way.
any thoughts? i know i must be doing something wrong, but the issue is consistant across different computer, running different OS and different versions of PREM...so either i am doing it wrong or premiere is fundamentally broke.....i suspect its me though

is there a logical reason for opting for a preset which is the lowest common denominator rather than a highest? is it not better to work at the best res possible?
does it matter either way? because i have often created 1080p content and worked in a 1024/576 edit environment only to later export at 1080p with no loss of quality?
i create the avi and then open this in quicktime to export to the desired formats.
now that you posted that comment i cant believe i have never done the simple trouble shoot of 'at what point does it go out of synch'
files are too big to playback uncompressed though.
i know it is a workflow issue and not a prem issue because no one else seems to have the problem.
im going to run some tests
thanks, will report back

CS3 to CS4 upgrade procedure

Adobe instructs to install CS4 upgrade on top of CS3 in order to get varification. I understand that it is possible to fully uninstall CS3 prior to CS4 without problems if you have the old SN. Is there any advantage or disadvandage of upgrading this way?
--Ken

I would keep CS3 installed on your PC if I were you - just in case. Since I installed CS4, I've gone back to using CS3, due to CS4's sluggish performance that I and many other people are experiencing.
I'll go back to CS4 when the bug fix comes out...

I may have totally screwed myself but...after installing Yosemite without checking first, my CS4 Design Premium suite wouldn't open. So I deinstalled it, but I only have disks for my old CS3. When I got the CS4 upgrade I downloaded it. What can I do??

I may have totally screwed myself but...after installing Yosemite without checking for potential problems with Adobe software, my CS4 Design Premium suite wouldn't open. So after consulting some forums, I deinstalled it, but I only have disks for my old CS3. When I got the CS4 upgrade I downloaded it, back in 2011... What can I do?? Everything was fine before I upgraded that *#$%* Yosemite.

You can find the CS4 download here: https://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
Benjamin

Video out of synch with audio premiere cs4

Hi, im really new to Adobe premiere pro cs4 and i just wanted to import a video. Most of the videos I import are out of synch with the audio. The audio is in time, but the video is sped up about 6 times as fast????

We will need a lot more information about those Videos. This ARTICLE will give you ideas on the info that will be so very useful for us to help you.
This ARTICLE will give you some background on Video formats/CODEC's.
Good luck, and please let us know more about those files. A screen-cap of G-Spot would be very useful.
Hunt

Movie Clips Actions Get Out Of Synch With Audio

My movie is five about minutes long with audio and an offscreen timeline move clip containing action script to control other movie clips or play the root directory. After about a minute or so, movie clips get out-of-synch with the audio, apparently its getting bogged down.
My swf file doesn't seem that big, about 2.2MB and my move clips aren't that complex, although up to three levels deep.
My version is Flash 8 Professional and my laptop was on the high end about 18 months ago.
Am I missing something or expecting too much from Flash?
Thanks,
Mike (who seems to know enough to be dangerous)

CS3 TO CS4 UPGRADE ISSUES

I HAVE HARD DRIVES WITH A BUNCH OF FOLDERS THEY ARE LABELED ACCORDING TO BEING FILM SCANNED OR DIGITALLY SHOT THEY WORKED SWELL IN BRIDE CS3 BUT NOW IN CS 4 IT SEEMS TO HAVE ARBITRARILY THROWN AWAY SOME LABELS IS THERE A WAY TO UPDATE LABEL INFO IN BRIDGE 4

First there is no need for shouting so please don't use the caps lock next time :-)
You might try the purge cache for folder option using the menu Tools - cache - purge cache for folder.
An other thought that comes up is that Bridge needs a certain time to read the files and cache it again, did you take enough time for this?
There is to my knowledge no problem with reading labels, ratings and settings previous set in CS3 when upgrading to CS4 and it should work as expected.

Uninstall CS3 if upgrade to CS4?

Okay, stupid question coming your way . . . .
I have Dreamweaver CS3 full version. I bought and installed
Dreamweaver CS4 upgrade. Both are listed in my applications. Can I
safely uninstall CS3 now to clear room?

If you can verify that all of your site definitions and all
of the
extensions migrated properly then yes.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ncwebpros" <[email protected]> wrote in
message
news:gh77hk$fg0$[email protected]..
> Okay, stupid question coming your way . . . .
>
> I have Dreamweaver CS3 full version. I bought and
installed Dreamweaver
> CS4
> upgrade. Both are listed in my applications. Can I
safely uninstall CS3
> now to
> clear room?
>

CS4 Upgrade - still use CS3?

I currently have CS3 and I'm thinking about getting the CS4 Upgrade. I know if I buy the regular CS4 software I'll be able to use CS3 AND CS4, but I'm wondering if this is also true if I get the CS4 Upgrade. I've never upgraded before, so I'm not really sure how that works. There are parts of CS3 that I prefer over CS4 (and vice versa), so if purchasing the Upgrade means I can't use both on the same computer, then I'd rather not get CS4 at all.
Thanks in advance for any help!

Yes you can still use both versions after the upgrade.
The upgrade does not touch the earlier version, it is a full installation in a separate folder under Program Files.
You can't have both versions running simultaneously but that's hardly a drawback.
(Most of the features removed from CS4 can be added back in.)

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to CS5. Can anyone assist

Contact serial number support by web chat.
Mylenium

Cs3-cs4 upgrade clips out of synch

Similar Messages

Maybe you are looking for