CS3 Device Profile Updates

How can I tell which is the last Device Profile Update
installed on the computer I work on?
How can I tell if the Flash Lite 3 update was installed
before the Device Profile Update #4 or not?
Was the Flash Lite 3 update done by the built in CS3 updater
automatically, or it sould have been installed manually?
My apologies if the questions sound stupid.

jsnandi,
With all due respect, you misunderstand my question.
You're telling me to install the Update #4. If I do it,
seeing some changes in the status of the profiles could mean a
successful update--and a successful downgrade too. Just think about
it: if the #5 has already been installed and I overwrite it with
#4, it causes changes too. This is not a solution, this is blind
flying.
The question is if there is a way to tell which is the latest
update installed on this computer--prior to any actions.
I don't want to do any guesswork, don't want to investigate
any changes in the status of the profiles after an experimental
install, want to know it for sure. Is there a way or not?

Similar Messages

Flashlite 3 - cs3 device central update crashing :(

Hi all,
I've just installed flash9_en_us_9_0_2_update and
AdobeDeviceCentralAll_Patch.dmg (osx). So I can now publish to
Flashlite3. However, I have a flash file which runs fine in device
central when exported as Flashlite2 but when I try to export it as
Flashlite3 (using any of the adobe generic flashlite3 profiles) it
begins to run in device central but then device central crashes
(quit unexpectedly) :(
I don't suppose anyone here has any ideas what might be going
wrong?
some of the gumf from osx is below.
ade.
Date/Time: 2008-01-12 19:51:36.283 +0000
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Device Central
Path: /Applications/Adobe Device Central CS3/Device
Central.app/Contents/MacOS/Device Central
Parent: WindowServer [56]
Version: 1.1.0 (???)
PID: 19071
Thread: 0
Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_INVALID_ADDRESS (0x0001) at 0x726f4446
Thread 0 Crashed:
0 ...be.Flash Player.FlashLite21 0x07fe3b1d mALLOc(void*,
unsigned long) + 2831
1 ...be.Flash Player.FlashLite21 0x07fe3f2d dlmalloc + 21
2 ...be.Flash Player.FlashLite21 0x07ff371b
MemoryAllocator::Alloc(unsigned long) + 31
3 ...be.Flash Player.FlashLite21 0x07f7415c
DisplayList::PlaceObject(SObject*, PlaceInfo*) + 140
4 ...be.Flash Player.FlashLite21 0x07fb1465
ScriptThread::PlaceObject2or3(bool) + 1221
5 ...be.Flash Player.FlashLite21 0x07fb234d
ScriptThread::DoTag() + 3243
6 ...be.Flash Player.FlashLite21 0x07fb2973
ScriptThread::DrawFrame(int, int) + 109
7 ...be.Flash Player.FlashLite21 0x07f750f6
DisplayList::PlaceObject(SObject*, PlaceInfo*) + 4134
8 ...be.Flash Player.FlashLite21 0x07fb1465
ScriptThread::PlaceObject2or3(bool) + 1221
9 ...be.Flash Player.FlashLite21 0x07fb234d
ScriptThread::DoTag() + 3243
10 ...be.Flash Player.FlashLite21 0x07fb2973
ScriptThread::DrawFrame(int, int) + 109
11 ...be.Flash Player.FlashLite21 0x07f750f6
DisplayList::PlaceObject(SObject*, PlaceInfo*) + 4134
12 ...be.Flash Player.FlashLite21 0x07fb1465
ScriptThread::PlaceObject2or3(bool) + 1221
13 ...be.Flash Player.FlashLite21 0x07fb234d
ScriptThread::DoTag() + 3243
14 ...be.Flash Player.FlashLite21 0x07fb2b37
ScriptThread::DrawFrame(int, int) + 561
15 ...be.Flash Player.FlashLite21 0x07fb31cd
ScriptThread::Seek(int) + 109
16 ...be.Flash Player.FlashLite21 0x07f80dbe
CorePlayer::DoActions2(int, bool) + 16204
17 ...be.Flash Player.FlashLite21 0x07f82f36
CorePlayer::DoActions(int, bool) + 162
18 ...be.Flash Player.FlashLite21 0x07fd218d
CorePlayer::DoPlay(bool, bool) + 4385
19 ...be.Flash Player.FlashLite21 0x07f4511d
FI_HandleDoPlay(PlatformPlayer*, unsigned short) + 61
20 ...be.Flash Player.FlashLite21 0x07f46753 FI_DoPlay + 117
21 ...e.devicecentral.application 0x000f4fe5
MCFlashLitePlayer::FI_DoPlay(unsigned short) + 53
22 ...e.devicecentral.application 0x0005230e
MCFlashLite20Client::NextTick(unsigned char) + 1022
23 ...e.devicecentral.application 0x0000a08f
MCEmulatorHandler::NextTick() + 399
24 ...e.devicecentral.application 0x0009c37d
MCSkinHandler::DoIdle(SCLMessage*) + 47
25 com.adobe.SCL 0x01295917
SCLMessageHandler::HandleNullMessage(SCLMessage*) + 41
26 com.adobe.SCL 0x01296820
SCLMessageHandler::TakeMessage(SCLMessage*) + 208
27 com.adobe.SCL 0x011cb2bc SCLApplication::CheckIdle() + 120
28 com.adobe.SCL 0x011c8311 SCLApplication::MainEvent() + 33
29 ...e.devicecentral.application 0x0000493c
MCApplication::Run() + 326
30 com.adobe.SCL 0x011cc3b6 SCLMain(int, char**) + 232
31 ...e.devicecentral.application 0x00002f71 main + 389
32 ...e.devicecentral.application 0x0000277a _start + 216
33 ...e.devicecentral.application 0x000026a1 start + 41
Thread 1:
0 libSystem.B.dylib 0x900248c7 semaphore_wait_signal_trap + 7
1 com.apple.Foundation 0x9284b26c -[NSConditionLock
lockWhenCondition:] + 39
2 ...e.devicecentral.application 0x0017652d
AMTConditionLock::LockWhenCondition(int) + 43
3 ...e.devicecentral.application 0x001692a1
AMTPCDWorkerThread::HandleRequests(void*) + 87
4 ...e.devicecentral.application 0x00174058 -[AMTThreadHelper
threadWorker:] + 70
5 com.apple.Foundation 0x927f52e0 forkThreadForFunction + 123
6 libSystem.B.dylib 0x90024227 _pthread_body + 84
Thread 2:
0 libSystem.B.dylib 0x90037b57 mach_wait_until + 7
1 ...e.devicecentral.application 0x0014e66d
ScObjects::Thread::sleep(unsigned) + 79
2 ...e.devicecentral.application 0x0013d98f
ScObjects::BridgeTalkThread::run() + 153
3 ...e.devicecentral.application 0x0014e757
ScObjects::Thread::go(void*) + 167
4 libSystem.B.dylib 0x90024227 _pthread_body + 84
Thread 3:
0 libSystem.B.dylib 0x900248c7 semaphore_wait_signal_trap + 7
1 com.apple.ColorSync 0x915a96cf
pthreadSemaphoreWait(t_pthreadSemaphore*) + 35
2 com.apple.ColorSync 0x915c3de0 CMMConvTask(void*) + 60
3 libSystem.B.dylib 0x90024227 _pthread_body + 84
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x726f443e ebx: 0x07f740e1 ecx: 0x00002008 edx:
0x0804b870
edi: 0x08106e10 esi: 0x00001f40 ebp: 0xbfffefa8 esp:
0xbfffeef0
ss: 0x0000001f efl: 0x00010202 eip: 0x07fe3b1d cs:
0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
0x1000 - 0x332fff com.adobe.devicecentral.application 1.1.0
(???) /Applications/Adobe Device Central CS3/Device
Central.app/Contents/MacOS/Device Central
0x705000 - 0x74cfff com.adobe.adobe_caps adobe_caps
0.0.120.0 (0.0.120.0) /Applications/Adobe Device Central CS3/Device
Central.app/Contents/Frameworks/adobe_caps.framework/Versions/A/adobe_caps
0x1008000 - 0x1084fff AdobeScCore /Applications/Adobe Device
Central CS3/Device
Central.app/Contents/Frameworks/AdobeScCore.framework/Versions/A/AdobeScCore
0x10da000 - 0x115ffff AdobeExtendScript /Applications/Adobe
Device Central CS3/Device
Central.app/Contents/Frameworks/AdobeExtendScript.framework/Versions/A/AdobeExtendScript
0x11c1000 - 0x132bfff com.adobe.SCL 6.0.4
/Applications/Adobe Device Central CS3/Device
Central.app/Contents/Frameworks/SCL.framework/Versions/A/SCL
0x7528000 - 0x755dfff com.adobe.epic adobe_epic 2.0.1.1069
(2.0.1.1069) /Applications/Adobe Device Central CS3/Device
Central.app/Contents/Frameworks/adobe_epic.framework/adobe_epic
0x7736000 - 0x7baefff AdobeLM_libFNP.dylib
/Applications/Adobe Device Central CS3/Device
Central.app/Contents/MacOS/AdobeLM_libFNP.dylib
0x7f0b000 - 0x8015fff com.adobe.Flash Player.FlashLite21
"8.1" /Applications/Adobe Device Central CS3/Device
Central.app/Contents/Frameworks/Players/FL30/Flashlite.bundle/Contents/MacOS/Flashlite
0x10400000 - 0x10429fff libcurl /Applications/Adobe Device
Central CS3/Device
Central.app/Contents/Frameworks/libcurl.framework/libcurl
0x8fe00000 - 0x8fe4afff dyld 46.12 /usr/lib/dyld
0x90000000 - 0x90171fff libSystem.B.dylib
/usr/lib/libSystem.B.dylib

See this technote:
Flash Lite 3 update for Device Central CS3 failed to install
error
http://www.adobe.com/go/kb403020

How to obtain an updated Device Profile List xml file

Hi,
I would like to update the Device profile List used by the WLC to categorize WiFi devices.
I found in documentation how to upload the file to the controller,but where can I get a newer xml file?
Thanks.

Hi Terry,
Have you tried the procedures layed out in this 12.2.15 doc?
Working with Software Images
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080209240.html#wp1035507
You could also contact Cisco Tac, I'm sure they could get you a copy of the image. I do have one still but I'm sure there are legal ramifications to posting it here.
Let me know,
Rob

Where are Japanese device profiles for CS4

I have the US version of CS4 and I would like to get the device profiles for Japanese mobiles.
However the online library fails to come up with anything when I search for docomo, au, softbank etc.
I know they exist because you can download them for CS3 and they are documented all over the Adobe site.
So how can I download Japanese mobile phone profiles through CS4?
Thanks.

24-120 f/4, 70-200 f/4, 28-300 f/3.5-5.6, etc. Also, I have Lens Profile Downloader 1.0 installed and it works, but I cannot update to 1.0.1. It refules to install:
There is a Adobe supplied profile in the standard install for the 28-300 (NIKON D3X (Nikon AF-S NIKKOR 28-300mm f3.5-5.6 ED VR) - RAW) and for the 24-120 (NIKON D3X (Nikon AF-S NIKKOR 24-120mm f4G ED VR) - RAW). Those profiles will work fine for those lenses used on any Nikon body, including crop bodies. The 70-200 f/4 is too new I guess but I am sure it will show up soon. I don't have one (yet) otherwise I would have put up one already as it is trivial to generate these lens profiles yourself.

Is it possible to separate call forward unregistered & busy on a device profile?

I've got the following situation cropping up a surprising amount at our site:
User has 2 jobs within our institution. Works 3 days a week on job 1, 2 days on job 2. Each job is billed to a different cost centre, and the user doesn't want to be getting calls for job 1 when they're supposed to be working on job 2, and vice versa.
As such, we've created them 2 device profiles. When they log into the phone at the desk of whichever job they're currently working, they get prompted for which profile they want to log in to. The other device profile (if still logged in to the phone on the desk of the other job) is then forcibly logged out.
When profile 1, for job 1, is logged in, but the user is already on a call, they want incoming calls to that extension to be directed to their voicemail (i.e. set Call Forward Busy [Internal|External] to send to voicemail). They can then check voicemail and follow up on the call as soon as they're off the current one.
When profile 1/job 1 is logged *out*, i.e. they're currently working job 2, they want incoming calls to job 1's extension to be immediately diverted to a colleage within the same job 1 team.
I thought I could do this by utilising Call Forward Unregistered [Internal|External], but this does not seem to be the case. When a device profile is not logged in to a device it seems like the busy trigger just gets treated as 0 so the value of Call Forward Busy is followed. I can't see any situation where Call Forward Unregistered is ever utilised if an extension is only associated with a device profile.
Is there any way to do what I want (without massively convoluted configuration on Call Manager)? If not, do people think this is worth raising as a feature request (or bug in expected behaviour) for later versions of Call Manager?
We're currently on CUCM 8.5, FYI, in case this is something that's already been updated in version 9 or later.

Some progress on second idea. Saved a copy of universal access plist with cursor set to large then set the cursor to small again. Replacing the plist file had no effect until I went into the UA pane and changed a setting at which point it must rewrite the file and refresh because the cursor size also changed at this point.
Tried the same again and restarted Finder, no effect. Also tried altering another pref pane instead with no effect. Need a way to force the computer to look at the plist files, no idea how though. :-)

Device profile settings

Have now done 3 tv resets to try and get this to work whilst attempting to set up cloud. Agreed to terms and conditions etc but then the screen seems to freeze when it comes to "device profile settings" . Any suggestions? Thanks in advance.

That's OK now... Day after I had pop up for software update and I update it and I adjusted profile settings. The number is OK, its produced for German market and it's the same as 50L4300U ( your model ). But still I have a flash player problem, kinda annoying.

Bulk Subscribe/Unsubscribe a Service to devices/device profiles

Hi,
I want to subscribe a xml service to 1000 devices and device profiles.
I know how to do it one by one to a device or to a device profile.
Is there any way to perform the task by any bulk type of action so as that I can do it to all the devices /device profiles at a sinle go.
Thanks
Pranjol

For devices, I believe bulk admin allows you to do that.
For device profiles, I'm afraid you're going to have to write your own application.
First you extract the UDP name of all the UDPs you want to update, then you do a getDeviceProfile for each, check if the services already contains the one you want to add, if not, add it, then perform an updateDeviceProfile and repeat.

Japanese device profiles on CS4

I have the US version of CS4 and I would like to get the device profiles for Japanese mobiles.
However the online library fails to come up with anything when I search for docomo, au, softbank etc.
I know they exist because you can download them for CS3 and they are documented all over the Adobe site.
So how can I download Japanese mobile phone profiles through CS4?
Thanks.

Hi.
You can export all UDP.
Edit it with Excel
filter only entries with empty user
Upload the modified file as UDP- UDP Delete Custom File
Select delete device profile from BAT menu
HTH
Regards
Carlo

Mobile Device Profile

hi
I have to upload mobile device profile in Content Delivery Server, from where i can find the device profile of the mobile.

>I was just wondering if anyone had any information on a
Flash 8 update for
>a PSP mobile device profile? (ie. any release date info)
Don;'t hold your breath. Adobe are very busy coming to grips
with all the
Macromedia tools they bought. It took 3 years of begging to
get a Flash 7
player for PocketPC, so you are likely going to have to wait
a while for
Flash 8 on PSP.
Steve
ACE - Adobe Community Expert, Authorware
My blog -
http://stevehoward.blogspot.com/
Authorware tips -
http://www.tomorrows-key.com

PlayBook "This item not supported by your current device profile"

Hi I bought Blackberry Playbook before 1 week I update os and when i try to install any app like skype, viber, wechatt etc there is no download option.
when i open that aap in blackberry app world there is written "This item not supported by your current device profile" I am worry about it can some one help me please about it.
I am located in Dubai.
waiting for reply...
Thanks

Skype is BB10 only, Playbook is on 2.1.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

How to use Device Profiles and Viewing Conditions Profile in Photoshop Elements 11?

In trying to get to grips with the Colour management aspects of PSE11, I have encountered the following problems:
Having selected "Display" a sequence of clicks (Change display settings -> Advanced settings -> Colour Management -> Colour Management tab -> Colour Management)
gives a screen which includes the headings:
Device Profile and Viewing Conditions Profile.
1. Device Profile. Besides sRGB and ARGB, the profile list includes the profiles for all of the Epson papers. (I have an Epson Stylus Photo PX810FW).
I changed the Profile to an Epson Grayscale, this was accepted within the menu, but there are no changes from normal when I viewed the image on the Windows screen or within
PSE11. ("normal" is sRGB or ARGB).
I thought it worth a try to test that, if I wanted the display image to closely represent what I would get on a particular Epson paper, this may be a way to do it.(I suspected this approach because I have never
seen it in the literature!).
So what is the purpose of all of the paper Profiles appearing in the Display listing?
2. The Viewing Conditions Profile has also several options. I have tried to find the criteria for choosing one rather than the other, but failed to find any information. Can anyone help? I seek general guidance
rather than the details of the Profiles.
As a seperate question:
Selecting Image on the PSE11 menu across the top of the displayed image, and then Convert Colour Profile, I tried this process on an image, converting tiff to sRGB. When saved there was an extra asterisk in the saved title but in this case,
the file was still labelled tiff and there was no change in the number of Mbs. If a conversion has taken place, how is one to know? Does saving a tiff file as jpeg change its colour profile? When is it useful to use this feature?
Many thanks to all responders!

Addressing your second question, you are confusing two different things.
tiff is an image file format, as is jpeg, as is psd, as is png, as are dozens (if not hundreds, http://en.wikipedia.org/wiki/Image_file_formats) of other formats.
A colour profile represents the colour characteristics of devices so that, for example, displays know how to display the colours, printers know how to print them.
Image files MAY, but do not have to, contain colour profiles.
For details:
http://help.adobe.com/en_US/creativesuite/cs/using/WS52323996-D045-437d-BD45-04955E987DFB. html
http://en.wikipedia.org/wiki/Color_management#Color_profiles
http://en.wikipedia.org/wiki/ICC_profile
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

Hey -
I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

How do I get my mobile devices to update my itune tunes?

How do I get my mobile devices to update my itune tunes with the cloud?

Can you explain more about what you are trying to do? I'm not sure what you mean when you say you want to update your iTunes music with the cloud.

How do i get iphoto to NOT open automatically when i plug in my devices for updating in iTunes ??

How do i get iphoto to NOT open automatically when i plug in my devices for updating in iTunes ??

Just so i understand. It happens when i connect my Ipad or Iphone, which i want to stop. I'm cool with it opening when I connect my camera tho. Can i customize it that way (just to open for my camera, and NOT my i-devices) ?
thx for the help

Desktop Manager asks for "insert BB device software updater disk"

When open DM (v 5.0) a message "insert BB device software updater disk" for a file named "ApploaderWebSL-Upgrade[1].msi". I cant find it....help needed....
Solved!
Go to Solution.

OK. Can you uninstall 5.0 first. Next download and save the DM 5.0 exe file somewhere on your computer. Instead of double-clicking the file to install it, first extract the contents of the file to a folder on your computer. You can use any zipping program (i.e.. Winzip, Winrar, 7-zip) to right click the EXE file and choose Extract To. On my computer I created a folder called "Desktop Manager" and extracted all of the contents into that. Now you can go into the folder that contains the extracted contents and run the "BlackBerrySetup.exe" file to install the software.
If you just double click on the EXE file then the software extracts all required files to a temporary folder on your computer. After the installation is complete then the temporary files get deleted. So the main benefit to doing it above is that all of the installation files will always be located in a folder on your computer. So if you ever have to reinstall, repair, or find an MSI file that the program needs you don't have to download the software again.
Let me know if that works out.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

CS3 Device Profile Updates

Similar Messages

Maybe you are looking for