CS3 doesn't start again after deinstallation

CS3 suddenly didn't start any more. So I deinstalled CS3 and tried to reinstall the programm, but it doesn't work .ö...
The message is "Adobe Photoshop wird initialisiert" and after this nothing happens.
Is there anybody, who can help me???

I would uninstall, run the Adobe Script Cleaner and install in default locations.

Similar Messages

Flash CC doesn't start up after last update

Flash CC doesn't start up after last update. It said "Training en zelfstudie" (Training and self-stufy in Dutch) for the update.
Everything was working fine before the update, now if I try to start-up Flash solo,
it says: "Flash werkt niet meer" (Flash has stopped working), and quits.
As you can probably tell from the message, I'm on Windows 7.
Now here is interesting info: if I double click a previous movie, then Flash starts up fine and loads the previous movie.
However when I close it and the screen that should appear is the "new movie" dialog, flash hangs again.
So obviously something went wrong installing the new update, or the update doesn't work properly.
I'm now working with my pre-cc flash5.5 version, which I re-installed to avoid crashing flash every time I close a file.
My questions:
1- Where do I log this problem? (Or am I in the right place?)
2- Can I re-install the previous version, which worked fine? (I can live without tutorials etc.)
3- Can I try to re-install this version if the above is not possible and how do I go about doing that?

What fixed the problem for me was just reinstalling Flash CC. I thought I'd give it a try, because I couldn't find a message of anyone experiencing the same problem.
So I used the control panel to uninstall Flash, then I tried reinstalling.
Creative Cloud kept saying Flash is up to date, so you can't reinstall. If you click on the gear and choose Exit and then restart Creative Cloud it will take a few seconds, but the it will see the situation as it is and you can reinstall Flash.
After the reinstall the issue was gone.
Thanks for the other solutions, I think this is a handy resource for rolling back Flash if I ever do need it
and gives me more confidence in the creative cloud product.
Maybe Adobe will pick it up and make it easier for us 'normal' creative-cloud users to
pick which version we want. Like you can do in CVS systems.

My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

If your MBP is under warranty, bring it to an Apple store and have the technicians fix it. If not, try the steps in this support article:
http://support.apple.com/kb/ts2570
Ciao.

Start again after presentation

when I am at the last slide and I want to start the whole presentation again from the start, I have to manually scroll all my slides to no. 1 in order to start a new presentation!
There must be something wrong!
Even if I go to keynote presentation window. where all the presentations folders are, when I douple tap a presentation, it shows me the last slide I of my previous presentation.
there must be a rseset somewhere, but I can not find it.
I find it quite troublesome to scroll up those masses of slides just to start again.

Hi Aldo,
The setting of restartable doesn't matter in this case.
If the database is down when the job is supposed to run then the job will run when the database comes back up.
There is one exception, if you set schedule_limit to a non-NULL value and the
database_start_time - requested_job_start_time > schedule_limit
then that job run will be skipped (the schedule_limit is an upper limit on how late the scheduler is allowed to run the job).
The restartable flag only comes into play when a job fails or the database is shutdown while running a job. The restartable flag says whether the job should be restarted immediately ( or as soon as the database starts up again).
Hope this helps. There is a forum dedicated to the Scheduler here
Scheduler
-Ravi

Kernel Panics starting again after long break

About 3 months ago i experienced a lot of random Kernel Panics and after trying all sorts of solutions the only thing that solved it was a total reinstall of my Tiger 10.3 with a zero out data on the Tiger reinstall. I did a copy (using SuperDuper) of my HD onto a external Firewire disk, and then copied that back afterwards.
Now it's starting again. I have Tiger 10.4.4 and have KP's almost every day. The latest looks like this (no periphals at all). Can anyone out there decipher the KP Log?:
Sat Jan 21 17:55:00 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000000 PC=0x00000000000A5220
Latest crash info for cpu 0:
Exception state (sv=0x3B022500)
PC=0x000A5220; MSR=0x00009030; DAR=0x00000000; DSISR=0x40000000; LR=0x0006B324; R1=0x1752B910; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x0006B31C 0x0006B5F0 0x002D6B7C 0x002D7CBC 0x002D7DD4
0x002D7D98 0x008F7B04 0x008E985C 0x00905F14 0x008E9940 0x002E9C38 0x0008C118 0x000291C0
0x000233AC 0x000AC02C 0xFF4771E9
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x8e2000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x479000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x880000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x8a4000
Proceeding back via exception chain:
Exception state (sv=0x3B022500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2D40AC80)
PC=0x9000B208; MSR=0x0200D030; DAR=0xE47A5EA4; DSISR=0x40000000; LR=0x9000B15C; R1=0xBFFFDE10; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x3B022500)
PC=0x000A5220; MSR=0x00009030; DAR=0x00000000; DSISR=0x40000000; LR=0x0006B324; R1=0x1752B910; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x0006B31C 0x0006B5F0 0x002D6B7C 0x002D7CBC 0x002D7DD4
0x002D7D98 0x008F7B04 0x008E985C 0x00905F14 0x008E9940 0x002E9C38 0x0008C118 0x000291C0
0x000233AC 0x000AC02C 0xFF4771E9
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x8e2000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x479000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x880000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x8a4000
Exception state (sv=0x2D40AC80)
PC=0x9000B208; MSR=0x0200D030; DAR=0xE47A5EA4; DSISR=0x40000000; LR=0x9000B15C; R1=0xBFFFDE10; XCP=0x000000

Hi Flemming--
thanks for your reply.
I don't know if its the graphics system, coz' the
other day i had a KP that said:
Kernel loadable modules in backtrace (with
dependencies):
com.apple.iokit.AppleAirPort2(404.2)@0x65c000
dependency:
com.apple.iokit.IONetworkingFamily(1.5.0)@0x526000
dependency:
com.apple.iokit.IOPCIFamily(1.7)@0x479000
om.apple.iokit.IONetworkingFamily(1.5.0)@0x526000
- which made me suspecious about the Airport card or
something. But it's kinda random what the log says
and the only repeating line i see is:
" dependency:
com.apple.iokit.IOPCIFamily(1.7)@0x479000".
So i'm still in doubt here.
You're right, it's probably not the graphics system if the other lines change. But if they always show the IOPCIFamily, it could be a logic board problem or a bad stick of RAM. If you have extra RAM, you could try swapping RAM around and see if that fixes the problem.
And for the Apple
hardware Test - everybody is talking about that but i
never could find that on any CD's i've had from Apple.
It depends on how old your computer is. The Apple Hardware Test for my PowerBook (Oct 2006) is on the "PowerBook G4 Mac OS X 15-inch and 17-inch Install Disc 1". It's referred to on the lower left side of the disc as "AHT 2.5.2", but the directions in the upper right refer to it as Apple Hardware Test: "To use Apple Hardware Test , hold down the option key as the computer starts up."
For my iMac G5, it's on another disc labelled "Additional Software & Apple Hardware Test". In the more distant past, I remember it coming on a completely separate CD, and the CD had a silver label, not the usual gray ones of the OS restore discs that came with the computer. But I'm not sure how long ago that's been.
best,
charlie

I Mac doesn't start up after OS Leopard reinstallation

Hello,
I had Kernel issue and had to reinstall OS Leopard.
After successful reinstallation, I restarted my I Mac, however, it doesn't start up completely and keeps loading for the last 6 hours.
Please could you advise what is the issue and how to handle it?
Thanks, Igor

First of all, do you have a working back-up of all your files?
Do you have any devices connected other than keyboard/mouse/trackpad? If so, try starting with them disconnected.
If that didn't work, and I know you've tried some of these things already, I think I would have one last go with:
Resetting the SMC & PRAM:
SMC Reset
Shut down the computer.
Unplug the computer's power cord and disconnect attached devices.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Another go at a Safe Boot:
http://support.apple.com/kb/ht1455
And if that fails re-install the OS using the Recovery HD. Good luck.

Song starts again after a few seconds

Just noticed a strange one...
My iPhone 5 is syncing music and I'm playing something else on it while this is happening. Sometimes, a track will start and several seconds into it, it will start again from the beginning. The display shows the name of the previous track and I have to press forward to get the track to play properly.
The song I'm playing is from an album that has already synchronised.
-Dan

Get over this, it happens to me too, all the time. Also when adding lyrics.
When you add artwork to an mp3-type file, the size will increase. And depending on iTune's mood with Windows at the time, it might stop.
So just hit pause and then play again, and your song should go.

I restarted my macbookpro but it doesn't start again. It starts to run and a grey screen appears bus after a few seconds it shuts down. Please help. I can't find anything online

Help me please just a grey screen with the apple logo appears and it looks like its going to start up but doesnt

See if you can boot into safe mode by holding down the shift key immediately after pressing the start button. Keep holding the shift key till a loading progress bar appears on the lower part of the screen. It will take a lot longer than normal to start this way. If you have Lion 10.7 installed you can try holding command-R keys to get intto recovery mode and run disk utility.
If you want some great tips on trouble shooting go to this link to frequent poster ds store's page.
ds store's User Tips https://discussions.apple.com/people/ds%20store?view=documents
This one covers your problem https://discussions.apple.com/docs/DOC-3392

Random Shutdowns Started Again After Fix - Some Questions for Others

::sigh::
After a very prompt repair followed by 3 weeks of constant use with no problems, tonight I had another random shutdown. (Here we go again.) I never was able to find anyone at Apple who could tell me what they fixed (it was not a logic board replacement) but apparently it wasn't a permanent fix.
Some observations and questions:
When random shutdowns start, my "previous shutdown code" in the system log changes to -72, and continue to register as -72 even when I shutdown the computer myself. During the period when the system was working after the repair, shutdown codes were always 0s or 3s. Have others noticed the same pattern? In my experience, once that first negative code appears, it doesn't change back to normal, regardless of how the computer is turned off (except after the repair).
Also, tonight was the first time since my repair that I used the 3-prong power cord with the AC adapter (rather than just the two prong). Could there be any connection (perhaps a faulty cord sendinga surge to the system and damaging something)? During the last round, shutdowns occurred whether on AC power or battery, but I'm wondering if the use of that cord may have triggered the problem in the first place. Has anyone that has had random shutdowns never used the 3-prong cord at all?
The other thing I've noticed is that importing digital camera photos into iPhoto often seems to trigger shutdowns (not all of them, but some of them). My random shutdown tonight happened after editing photos I'd just imported from my camera (and right after I ejected and unplugged the camera). Could the connection to the camera somehow cause a problem? Has anyone who has had random shutdowns NOT connected a digital camera or used iPhoto?
Just grasping at straws here to try to figure out what causes this problem (since apparently Apple hasn't figured it out yet). Looks like I'm going to have to take it back again. I love my MacBook better than any PC I've ever had, but I never had these kind of hardware problems with my PCs (and if I did have a problem it was usually pretty simple to troubleshoot and repair).

I think you're confused, it's not as simple as that.
Here's why - I just ran two yes terminal sessions on my wife's MacBook and let it run for 15 minutes. Fan came on, system is running warm but running just fine.
On my RSD MacBook, while I was at the Apple Store, trying to demonstrate the RSD it ran two yes terminals for like 5 minutes and kept running however when I closed Terminal - wham RSD.
It IS NOT heat related. Most likely the system "thinks" there's a heat problem by a bad sensor, wire whatever.
If I can't run my MacBook at 100% (actually 200%, both cores) for as long as I need then it is defective and should be returned to Apple.
When my MacBook was working I ran EVN (Escape Velocity NOVA) which runs under Rosetta, man that thing sucked the battery dry in less than 60 minutes and the system got pretty warm too. BUT IT KEPT running and didn't shut down. When my system was acting up I couldn't even browse the Apple web site and ut would shutdown.
Greg
PS I installed the SMC update a week before my system started having RSD.

Dreamwaver CS3 doesn't start on 64 bit machine

I have just bought a new desktop, Acer M7300, and upgraded it to Windows 7 Home Premium 64 bit. (I also exprerienced the same prome with Vista Home Premium).
When I start Dreamweaver nothing appears to happen. When I checked in task manager there is a process that has grabbed ~40m of memory.
I have tried uninstall/reinstall with a fresh download. I have also removed all remaining files after the uninstall.
I have tried running it Administartor and various versions of XP compatibility
I have run the Acer updates recommended in the FAQ's.
It hasn't got to the point where it installs the personal .dat files so no need to look for corruptions there.

Its now working but asked for a licence which I didn't have so I'm running a 30 day trial for now.
I did a factory reset back and Vista install. I followed this with Windows 7 upgrade but when it got to the choice of installation I did a clean install rather than an upgrade. I then installed other apps, MS Office 2007, Photoshop elements and a few other ones. I checked that all the correct drivers were in place, set up all my file sharing and network settings for my 2 laptops and finally ran DW CS3 install.
I don't know which of the above solved the problem, but at least I can now get on with some work.
Thanks for you support,
Simon

Apple TV 3 doesn't start anymore after update

After installing the current software update my ATV3 didnn't start anymore.
LED is blinking slowly forever.
So I connected it to ITunes with a Micro-USB cable to restore it. Restore went fine.
Back on the TV with Ethernet connected I can choose my language then the screen gets dark for a moment and I'm back at the screen with the language chioces.
When I disconnect the Ethernet cable, I get to the "Choose the WiFi Network or connect Ethernet" screen.
-> my Wifi Network is not shown (its normally visible)
-> when I reconnect the Ethernet cable I'm rebooted back to the language coice again.
Retried the USB based Restore, Checked Firewall -> there I see that it gets the correct IP (it has a fixed one) and pacet capture shows hat it does a successfull http and an https request that seems to be cut short. No packets show up as blocked.
I stopped the DHCP server to get it to manual configuration -> still reboots as soon as it gets network.
Disconnected all other Apple devices from the net (might be a Bonjour problem) -> still reboots.

After posting this I found this thread:
https://discussions.apple.com/thread/4350553?start=0&tstart=0
Many have this problem, solution that worked for me was downgrading to 5.0.1 like described in the thread.

Wireless Connection Drops, Doesn't Start Again

This is driving me crazy. Every few hours or so, the wireless connection on my WRT54G2 drops. I can't connect to it from any computer, and the wireless icon on the router is no longer lit. I have to go to the router, unplug it, plug it back in, and press the refresh button on top of the router for it to start working again.
Any ideas?

Carvin206, after the firmware upgrade you need to perform a factory reset by holding in the reset button on back of the linksys router for 30 seconds, the lights will start to blink, wait about 2-3 minutes till the router syncs back up. However you will need to write down the settings in the router as they will be erased from the factory reset. You then will manually enter them back in by accessing IE and typing 192.168.1.1 into the address bar. The password = admin, unless you changed it.
Also try the below steps.
It is sounding like an interference issue. please try the below steps if you have not done so already.
1. Try switching to different channels, (1,6,and 11 are best) but do not hesitate to try the other channels to see which is best for you.
2. lets say that all the devices in your home are Wireless G , then set the router to Wireless G only, this way the router will not search for Wireless B
3. Any devices that are in the 2.4 GHz range are moved away from the router.
4. Always check for the latest firmware for the router
5. Always check for the latest driver for the wireless adapter.
Good luck,
Ttech

I am using Firefox 4.0 Beta 10. It doesn't start immediately after I click on the Firefox button located in my shortcut bar. And sometimes it even doesn't open. I don't know why it occurs, so please look into this matter. Thanks!

Whenever I click on the button of Firefox 4.0 Beta 10 located in my shortcut bar. It opens after a very long time i.e. after 5-10 minutes after I get irritated and start using Safari. And sometimes it doesn't even open. Please look into this matter. :D
Thanks

Try disabling hardware acceleration in your Firefox settings and see if it helps:
From the Firefox menu, go to '''Options''' and click the '''Advanced''' panel, then select the General tab. Clear the box in front of "Use hardware acceleration when available" so that it is unchecked, then restart Firefox. ([http://support.mozilla.com/media/uploads/gallery/images/2011-01-27-04-52-31-8c9d82.png screenshot]).
Ref: <br>
https://blog.mozilla.com/tglek/2010/12/21/rude-surprise-startup-overhead-of-windows-font-apis/

Why itunes doesn't start anymore after sync another iphone?

Hello geeky friends,
please help me to clear the following matter. I tried to sync another iPhone using the mobile owner account for the iTunes as well. After an error window popped-up (error 13014) than i'm even unable to start the program anymore, why? how to solve?
thanks for the support & god bless Steve Jobs!!!

the problem is solved ! I completely removed Itunes and all other Apple Software from my computer. Then I downloaded Itunes64Setup.exe again and installed it, without being connected to the internet and with my antivirus and firewall turned off.
This worked !
Kind regards,
Paul

Will jobs start again after a db shutdown?

Hi all,
sorry for this newbye question...
Suppose a job having a next_date for execution at 04/04/2007 04:00, at 04/04/2007 03:00 the db is shutted down and at 04/04/2007 06:00 is started up.
I repeat the scedule again:
04/04/2007 03:00 - Db shutdown
04/04/2007 04:00 - Job should run, but db is down
04/04/2007 06:00 - Db startup
??/??/???? ??:?? - When will the job run?
What happen at the job, when will it be executed, will it be broken and failures increased?
thanks a lot
aldo

Hi Aldo,
The setting of restartable doesn't matter in this case.
If the database is down when the job is supposed to run then the job will run when the database comes back up.
There is one exception, if you set schedule_limit to a non-NULL value and the
database_start_time - requested_job_start_time > schedule_limit
then that job run will be skipped (the schedule_limit is an upper limit on how late the scheduler is allowed to run the job).
The restartable flag only comes into play when a job fails or the database is shutdown while running a job. The restartable flag says whether the job should be restarted immediately ( or as soon as the database starts up again).
Hope this helps. There is a forum dedicated to the Scheduler here
Scheduler
-Ravi

CS3 doesn't start again after deinstallation

Similar Messages

Maybe you are looking for