CS3 Exporter not found error
I have been able to create a great quality video in FLV format and post it to Youtube. But I need to export a standalone version. When I choose Windows Media as the format and then export, I get "Exporter not found"
Any solutions?
Some users have found that MS WMEncoder does a good job. It is a free download from MS.
As for why your CS3 cannot find a WMV Exporter module, it could be a corrupt install. My first act would be to do a Repair Installation, in hope that it would be repaired. Otherwise, the WMEncoder might be the way to go.
Good luck,
Hunt
Similar Messages
-
Codec Not Found error when trying to render/export layered sequence
I have a sequence that I never had problems with in the past but as of yesterday when I open the project and try to render or export. I get the infamous dialogue box saying, "Codec not found. You may be using a compression type without the corresponding hardware card."
I've narrowed it down to only being a problem wherever I have two particular types of media clips layered one on top of the other. In this case it is occurring wherever I have an Apple ProRes 422 (HQ) clip layered with an Animation codec clip containing a graphical bug that was created in After Effects and exported as a Quicktime Movie with RGB+Alpha. Because of the Alpha channel in the bug clip, it is automatically given the Animation codec upon export from After Effects to retain and preserve the transparency needed. I've also narrowed it down to only occurring when all this is combined on a sequence with its compressor set to standard ProRes 422 or ProRes HQ. If I set it to any other codec, such as any DV/DVC Pro or MPEG IMX codec then I can render and export again.
Also interesting is that I can nest the sequence into another sequence and render and export just fine as well, even with it set to either ProRes codec (which will probably prove to be a suitable workaround for the time being), however, any additional insight into this issue that anyone can provide, pertaining to what may have changed or caused my original sequence to suddenly not want to render anymore would be greatly appreciated.
And if anyone else reading this comes across this this same type of problem themselves, then I suggest what I just got to work: Duplicate your sequence, then delete the clips from the new sequence and nest the original sequence into it.
Here is some additional background info if desired:
I'm using FCP 6.0.6. The sequence I have going here is set to Apple ProRes 422 and consists entirely of Quicktime Movie files. Video Track 1 has the main video clips using the ProRes HQ codec (Again, even with the sequence set to ProRes HQ, it doesn't make any difference here). Track 2 has a graphic bug that was created in After Effects and layered over the Track 1 clips at various places. I was able to work with these clips and render as well as export the sequence with no problems last week. However, I was requested to revise the bug in After Effects, and then replace the old bug with new bug and export the sequence again. So yesterday, I simply opened up the After Effects project file for the bug, made the revisions and exported it with a new name using the same settings as the previous bug. The render problem I'm now facing surfaced right when I opened the FCP project file yesterday, before even importing and replacing the old bug with the new bug. I went ahead and imported the new bug and placed it in place of where the old bug occurred. But the render and problem remained. On this particular problem sequence, I can render the new bug if I actually disable or remove the ProRes clip beneath it, but I cannot in turn render the ProRes clip after disabling/removing the Animation clip above it.
Now, I can copy either type of clip into their own sequence allowing the clips' respective native settings (ProRes HQ & Animation) to take effect and then they will playback and export just fine. I can even copy the bug clip (Animation codec) and paste it into the other clip's ProRes HQ sequence and it will render and export just fine from there as long as it is placed next to the other clip and not layered over it. On these newer sequences, it is only when the bug (Animation) clip is layered over the ProRes HQ clip with the sequence set to ProRes or ProRes HQ do I tend to still get the "Codec not found" error.
I've also tried the following steps to try and troubleshoot to no avail:
1. Copied entire sequence into a new sequence. Problem still occurs.
2. Closed FCP, trashed preferences, and restarted FCP. Problem still not resolved.
3. Opened project on another computer, had same problem.Thanks for sharing these ideas about dealing with this error message.
For what it's worth, I finally managed to solve a similar issue by going into sequence settings, choosing the Video Processing tab, and changing Render 10-bit YUV to Render 8-bit YUV.
Maybe this helps someone? -
Report export (CSV) results in page not found error
Hello,
I'm having this strange error which i cannot seem to figure out. I have enabled report export through CSV in a report (report attributes). When i click the link in the report i get a page not found error (http 404). At first i thought it was a problem with the http-server. But as other applications (on different databases) don't have this problem i'm thinking it has to do with this apex-instance. Till 2 days ago it did work on this instance too.
I'm really out of ideas, so if anyone can push me in the right direction i would really appreciate!
Apex 3.2
DB 10.2.0.4
Thanks,
PatrickDoes this compare to the same as the url for your page?
Has your server changed?
Have you changed the dad file recently?
have you checked the Apache access/error logs right after the 404 error is encountered ?
Gus.. -
Quicktime would fail to write/export to server windows share with "Error -43: file not found" errors
Summary:
With the combination of Windows 7 and Quicktime 7.x, Quicktime would fail to write/export to server windows share with "Couldn't create output movie storage" and "Error -43: file not found" errors
Steps to Reproduce:
Trying to render to Quicktime files using network shared folders as a destination:
Unable to open file. (-1610153459)
The funny thing: it only happens when there are at least two shared folders mapped on the workstation, and the destination folder used for the rendered movie is not the first one.
If we have only two mapped drives, F: and G: for example, and we try to render something to F:, everything works fine and no error is showed. But, when the destination is the G: drive, rendering never works, the error is showed, but a zero-byte file is created in F: (!!). ODD! If we remap F: drive with a different letter, but a letter BEFORE G:, the problem always happens. If we remap drive F: to any letter AFTER G:, making G: the first available network drive, rendering works. Also, simply unmapping F: and leaving G: as the only connected network folder makes render to work.
We do not have a D: drive in our Windows 7 workstations, they are all C: only.
It is a 100% reproducible problem. We tried with three different Active Directory networks and workstations. It has all of the features of a software bug.
Any help would be appreciated.
Cheers!
Expected Results:
Error -43: file not found
Actual Results:
The workaround seems to be to use the full path to the servers instead of the mapped mount point (ie //server/z/... instead of Z:/...
Regression:
All versions of quicktime 7 in combination with windows 7 client and more than one smb share point mapped in a letter.
Notes:
All software that uses quicktime movie exports showed this error.Not sure what file your are referencing? Thanks for your suggestion, however, it's not relavant.
It renders fine if you render to either the UNC path or the first mapped drive.
i.e. If you have two mapped drives G: and H:
they both point to \\fileserver\share1\folder
If you render to H: it will fail, if you render to G: it works! Same path, same user, same permissions.
The only difference is H comes after G, so it fails... BUG. If it was to do with anything else, underscores, permissions etc, it would fail on both. -
Quicktime gets a file not found error in running of set up. tried downloading twice
Quicktime gets a file not found error in running of set up. tried downloading twice
Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip 353 KB -
"file not found" error in VI Logger when running an imported VI Logger task
I'm having trouble getting all of my imported tasks to run in VI Logger.
I'm using VI Logger 2.0, with an SCXI-1100. The data acquisition tasks I import run fine. One of the VI Logger tasks I've imported runs OK, but the other one gives an error:
"Engine Error!
Error Code = 7
LabView: File not found. The file may have been moved or deleted, or the file path might be incorrectly formatted for the OS."
If I create a new VI Logger task, the new task works OK. And my 1st VI Logger task to be imported works OK. So I know my setup mostly works. But our company has never been able to figure out importing tasks very well, so I'm looking for help.
Question 1: What file is LabView looking for? I've checked my Export path and database path, and they are identical in both the working task and the non-working task.
Question 2: Where else might I look for the difference between the 2 VI Logger tasks? Neither task uses any weird characters in the name, both have analog input channels and calculated channels. And I've mixed and matched the data acquisition tasks with no change (the good VI Logger task will run with either data task, the bad VI Logger task won't run with either data task), so I'm pretty sure the problem is in the VI Logger task, and not the data task. I've also tried importing the 2nd task on its own, as a separate import function, but that gave the same error.
Thanks for the help in advance,
JakeHi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip 353 KB -
"File Not Found" Error after Restoring Sharepoint List
Hello,
I restored a Sharepoint List via Powershell and all seemed to work fine. The Import-Log sais 0 Warnings and 0 Errors.
When I access the List now i can see all the Items, but when i click a Item to access it, i get a "File Not Found"-Error.
May the Alternate Access Mappings be the Problem? The List is restored from another Sharepoint-Farm that was accessed by different URLs.
What can i do to access the Items? Thanks for your help!How was this list moved? Using export-import? Do you still have the old list in the old environment? Can you turn off dialogs on the list so that we can tell where exactly it is navigating to? Can you also install fiddler to see the web hops?
Pranav Sharma
SharePoint Consultant, Portal Solutions -
Csv output feature results in a "page not found" error in IE (ver 8)
Has anyone else had issues with the csv output feature returning a "404 page not found" error when using IE version 8.0?
Hello. I'm getting an Http 404 The webpage cannot be found" error when trying to export any APEX application's query results into Excel (Application Express 3.2.1.00.10). This was working fine before. Nothing changed with our APEX application. I've been always using I.E. Version 7.0.5730.11 with no problems. I've reset the I.E. defaults and still the problem exists. I've downloaded Mozilla Firefox and the problem does not happen. However, I would like to know why my I.E. still gets this error? Any feedback or suggestions would greatly be appreciated. Thanks for your time.
-
Csv expoort - Page not found error
We have a problem with one of our employees in a satellite office -
She can access all of our apex reports without difficulty, but every time she clicks on a csv export link, she gets a page not found error. She sent me the link, and it works fine for me. Also, others in the same office have no problems.
She is on IE6 on XP pro.
Anyone have any ideas?
TIA
JohnHi,
Please check the log file to find more information about this issue. The path of the log file is:
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
In addition, please make sure the URL of the site is correct.
Please check whether you could access other pages in the problematic site.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Pls help in WEBDYNPRO Function Module 'RFC_START_PROGRAM' not found error
Dear Friends,
While i am calling one function module in webdynpro the follwing erroe is coming.
Error:-
Function Module 'RFC_START_PROGRAM' not found error
Code:-
CALL FUNCTION 'ZUPDATE' DESTINATION 'PCNCLNT300'
EXPORTING
im_material = item_matnr
im_vornr = item_vornr
im_sheet = item_sheet
IMPORTING
value = ZMESSAGE .Hi,
try declarig variable of type rfc_dest
data: lv_dest type rfc_dest.
call....
destination lv_dest
offcourse make sure your rfc destination has that name in sm59
and you have the corect authorizations to your user in the remote system
Are you btw sure that there is no screen action called inside
the function module? popup or something? because you cannot
call functions that have screen interaction like in sapgui
grtz,
Koen -
I am trying to execute a VI running on Linux from Teststand running on windows 2000 prof ,both running on two different machines.I used TCP/IP for the interface using the following steps on Labview VI:tools>options>VIserver>TCP/IP and gave the ip address of both the machines.When I gave the file path as c:\home\test.vi in Edit labview Vi call window(the Vi in linux is stored in /home/test.vi)and also in remote vi path:/home/test.vi,I get a file not found error.The teststand version is 3.0 and labview is 7.0.Any idea why this is happening and any solutions?
priya guru,
Here is a knowledge base that addresses your question: �How do I call test VIs that reside on a non-Windows platform from TestStand?�
You also need to set TCP/IP Access found in Tools->Options->'VI Server: TCP/IP Access'. Make sure that you list the IP address in the Access List to allow TCP/IP access to that machine. Finally you need to specify which VIs are accessible to remote applications. Open up Tools->Options->'VI Server: Exported VIs' and provide paths to the VIs you wish to be remotely accessible.
I have attached an example VI that demonstrates VI Server in action. Please post back if you are still having problems. Good luck!
Cr
aig H.
National Instruments
Attachments:
Remote_Run_--_VI_Server.zip 88 KB -
Terminal Returns Not Found Error for Most Commands
Hi all,
I'm really new to Mac OSX and UNIX based systems. I wanted to run a few Windows games on my Mac Mini so I started installing Wine and MacPorts. Having done so, I typed in "sudo port install wine" minus the quotes, the terminal returned a not found error. I tried other basic commands like say and clear and all of them return the not found error. I've googled this and all I've understood so far is that the PATH might be incorrectly set. So I ran this command: echo $PATH and it returned this: /opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/opt/local/bin
Can anyone tell me how to set this path correctly? I'm a complete newbie to mac and have no idea where .bash_profile or any of those files are. If it helps, I've also installed xCode and the Command Line tools for xCode. I'm running Mountain Lion.
PS: I tried export PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin but it only works as long as I keep the terminal window open. If I close it and open it again, it goes back to the same problem.
Thanks in advance,
JackSome time in your past, your or a script modified your shell initialization file. Most likely related to installing MacPorts.
Look in your home directory for one of the following files:
/bin/ls .bash_profile
/bin/ls .bash_login
/bin/ls .profile
/bin/ls .bashrc
One of them will have your current export PATH.
Using nano, edit the file wtih your export PATH to include the additional search directories. It would be best to put the missing search directories at the beginning of the list with the /opt/... directories from MacPorts at the end.
/usr/bin/nano .name.of.shell.initialization.script.that.has.the.export.PATH -
404 File not Found error trying servlet under https
Hi,
This is the first time that I've had to work with SSL. I have a servlet that worked fine under regular http. I had to implement SSL and run my site over https. When I try to access my servlet under HTTPS, I get the 404 File not found error. Is there something that I need to setup for servlets to run under SSL in apache or server.xml? or Do I need to modify my JSP and Servlet code?
I call my servlet from my JSP on the action method of the form like such:
* JSP call to servlet
<form action="https://www.benefitserver.com:8081/FDFServlet" method="post">
* Servlet code
import javax.servlet.*;
import javax.servlet.http.*;
import javax.net.ssl.*;
import java.io.*;
import java.util.*;
import com.yoursummit.benefitserver.*;
import com.adobe.fdf.*;
import com.adobe.fdf.exceptions.*;
public class FDFServlet extends HttpServlet
private static final String CONTENT_TYPE = "text/html";
private String fileout = "";
//Initialize global variables
public void init() throws ServletException
System.setProperty("java.protocol.handler.pkgs","sun.net.ssl.internal.www.protocol");
java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
//Process the HTTP Get request
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
doPost( request, response);
//Process the HTTP Post request
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
String planID = request.getParameter("planID");
String empID = request.getParameter("empID");
HttpSession session = request.getSession();
try {
FDFDoc outputFDF = null;
/* Create a new FDF. */
outputFDF = new FDFDoc();
// Set the form fields with values from the database
if ( planID.equalsIgnoreCase("31") )
formDeltaPopulation formDP = new formDeltaPopulation();
fileout = formDP.populateDeltaForm( outputFDF, planID, empID, request );
if (planID.equalsIgnoreCase("29") )
formUnicarePopulation formUC = new formUnicarePopulation();
fileout = formUC.populateUnicareForm( outputFDF, planID, empID, request );
if (planID.equalsIgnoreCase("30") || planID.equalsIgnoreCase("32") || planID.equalsIgnoreCase("33") || planID.equalsIgnoreCase("34") || planID.equalsIgnoreCase("35"))
formSunLifePopulation formSL = new formSunLifePopulation();
fileout = formSL.populateSunLifeForm( outputFDF, planID, empID, request );
response.sendRedirect(com.yoursummit.utils.urlRewrite.getServletURL(request,"emp_main.jsp?empID=" + empID));
} catch(FDFException fdfe) {
/* We handle an error by emitting an html header */
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("Caught FDF exception");
out.println(fdfe.toString());
fdfe.printStackTrace(out);
IOException e = new IOException ( fdfe.getMessage() );
throw e;
catch(IOException ioe) {
/* We handle an error by emitting an html header */
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("Caught FDF exception");
out.println(ioe.toString());
ioe.printStackTrace(out);
throw ioe;
catch(Exception e) {
/* We handle an error by emitting an html header */
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("Caught tomcatDB exception");
out.println(e.toString());
e.printStackTrace(out);
IOException ioe = new IOException ( e.getMessage() );
throw ioe;
//Clean up resources
public void destroy()
}I have been told that there is problem with my configuration of Tomcat. I have followed the documentation found at
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/ssl-howto.html
and it doesn't work. I have been working on this for a week now and can't seem to get it to work. Can someone please take a look at it and tell me what I am doing wrong? THANKS!
I get "HTTP 404 - File not Found" with the URL https://www.benefitserver.com/FDFServlet
I get "Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request" with the URL https://www.benefitserver.com/servlet/FDFServlet
I've looked at the log files for Apache and I don't see any errors listed. No errors logged in the Tomcat log file either.
* httpd.conf
## Include line for mod_jk.so (Jakarta-Tomcat installation)
#Include /usr/home/summimps/usr/local/jakarta/jakarta-tomcat-3.2.3/conf/mod_jk.conf-auto
LoadModule jk_module libexec/mod_jk.so
AddModule mod_jk.c
JkWorkersFile /usr/home/summimps/usr/tomcat4.1.24/conf/worker.properties
JkLogFile /usr/home/summimps/var/log/mod_jk.log
JkLogLevel info
#JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
#JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories
#JkRequestLogFormat "%w %V %T"
JkMount /*.jsp benefitserver
JkMount /solarc/*.jsp benefitserver
JkMount /servlet/* ajp13
JkMount /solarc/servlet/* ajp13
# Should mod_jk send SSL information to Tomcat (default is On)
#JkExtractSSL On
# What is the indicator for SSL (default is HTTPS)
JkHTTPSIndicator HTTPS
# What is the indicator for SSL session (default is SSL_SESSION_ID)
JkSESSIONIndicator SSL_SESSION_ID
# What is the indicator for client SSL cipher suit (default is SSL_CIPHER)
JkCIPHERIndicator SSL_CIPHER
# What is the indicator for the client SSL certificated (default is SSL_CLIENT_CERT)
JkCERTSIndicator SSL_CLIENT_CERT
<Directory />
AllowOverride None
</Directory>
<Directory "/usr/tomcat4.1.24/webapps/ROOT">
Options Indexes
<IfDefine SSL>
SSLRequireSSL
SSLOptions +StdEnvVars +ExportCertData +StrictRequire
SSLVerifyClient require
SSLVerifyDepth 1
</IfDefine>
</Directory>
<VirtualHost benefitserver.com www.benefitserver.com>
SSLRequireSSL
ServerName benefitserver.com
ServerAdmin [email protected]
DocumentRoot /usr/local/etc/httpd/htdocs/benefitserver
TransferLog /usr/local/etc/httpd/logs/bsAccess_log
ErrorLog /usr/local/etc/httpd/logs/bsError_log
</VirtualHost>
* server.xml
<?xml version='1.0' encoding='utf-8'?>
<Server className="org.apache.catalina.core.StandardServer" debug="0" port="8006" shutdown="SHUTDOWN">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" debug="0" jsr77Names="false"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" debug="0"/>
<GlobalNamingResources>
</GlobalNamingResources>
<Service className="org.apache.catalina.core.StandardService" debug="0" name="Tomcat-Standalone">
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
redirectPort="8443" bufferSize="2048" port="8081" connectionTimeout="20000" scheme="https" enableLookups="true" secure="true" protocolHandlerClassName="org.apache.coyote.http11.Http11Protocol" debug="0" disableUploadTimeout="true" maxKeepAliveRequests="100" proxyPort="0" tcpNoDelay="true" minProcessors="5" maxProcessors="75" acceptCount="100" useURIValidationHack="false" connectionLinger="-1" compression="off">
<Factory className="org.apache.catalina.net.SSLServerSocketFactory" keystoreFile="//.keystore" keystoreType="JKS" algorithm="SunX509" clientAuth="false" protocol="TLS"/>
</Connector>
<Engine className="org.apache.catalina.core.StandardEngine" mapperClass="org.apache.catalina.core.StandardEngineMapper" debug="0" defaultHost="localhost" name="Standalone">
<Host className="org.apache.catalina.core.StandardHost" appBase="webapps" liveDeploy="true" mapperClass="org.apache.catalina.core.StandardHostMapper" autoDeploy="true" configClass="org.apache.catalina.startup.ContextConfig" errorReportValveClass="org.apache.catalina.valves.ErrorReportValve" debug="9" deployXML="true" contextClass="org.apache.catalina.core.StandardContext" unpackWARs="true" name="localhost">
<Context className="org.apache.catalina.core.StandardContext" crossContext="false" reloadable="false" mapperClass="org.apache.catalina.core.StandardContextMapper" useNaming="true" debug="0" swallowOutput="false" privileged="false" displayName="Welcome to Tomcat" wrapperClass="org.apache.catalina.core.StandardWrapper" docBase="/usr/tomcat4.1.24/webapps/ROOT" cookies="true" path="" cachingAllowed="true" charsetMapperClass="org.apache.catalina.util.CharsetMapper">
<Environment name="uploadUrl" override="true" type="java.lang.String" description="URL to display uploaded file in Benefit Server" value="http://www.benefitserver.com:8081/bsup"/>
<Environment name="exportPath" override="true" type="java.lang.String" description="Export Path for Benefit Server Export Utility" value="/usr/tomcat4.1.24/webapps/ROOT/bsex"/>
<Environment name="uploadPath" override="true" type="java.lang.String" description="Upload Path for Benefit Server" value="/usr/tomcat4.1.24/webapps/ROOT/bsup/"/>
<Environment name="tempPath" override="true" type="java.lang.String" description="Temporary Directory for File Upload in Benefit Server - Developm" value="/usr/home/summimps/tmp/benefitserver"/>
<Resource name="BS_Data" type="javax.sql.DataSource" scope="Shareable"/>
<ResourceParams name="BS_Mail">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceParams name="BS_Data">
<parameter>
<name>url</name>
<value>jdbc:mysql://localhost/BS_Data</value>
</parameter>
<parameter>
<name>password</name>
<value>kdsusa1350</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>50</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>com.mysql.jdbc.Driver</value>
</parameter>
<parameter>
<name>username</name>
<value>summimps</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>5</value>
</parameter>
</ResourceParams>
</Context>
<Logger className="org.apache.catalina.logger.FileLogger" debug="0" verbosity="1" prefix="localhost_log." directory="logs" timestamp="true" suffix=".txt"/>
</Host>
<Logger className="org.apache.catalina.logger.FileLogger" debug="0" verbosity="1" prefix="catalina_log." directory="logs" timestamp="true" suffix=".txt"/>
<Realm className="org.apache.catalina.realm.UserDatabaseRealm" debug="0" resourceName="UserDatabase" validate="true"/>
</Engine>
</Service>
</Server>
* web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>FDFServlet</servlet-name>
<servlet-class>FDFServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>FDFServlet</servlet-name>
<url-pattern>/FDFServlet</url-pattern>
</servlet-mapping>
</web-app> -
Overwriting old website in FTP - 404 page not found error!!! Heeelllp! :(
Hi there,
I recently re-designed my website on Adobe Muse. It was originally designed in iWeb. For the iWeb website I used a 3rd party FTP application (Transit) to upload the site.
I wanted to overwright the old iWeb website with my new Adobe Muse website. So I deleted the files from the iWeb website on Transit, and used the inbuilt Adobe Muse FTP option to upload the new website.
Now, no matter what I do, all I get is the 404 'page not found' error when I try to visit my site.. What am I doing wrong? Are my settings on Muse incorrect? Should the site pages have a specific name? The home page that I want is titled 'selected artwork' in Muse... should that have something to do with the home directory link?
I'm so lost and frustrated! Please help!
Any help or advice would be so much appreciated!
Cheers,
Harriet.Hi Parikshit!
Thank you so much for your response!
My site is www.harrietbody.com and yes, I did change the name of my pages... I changed everything... I've asked my hosting people to reset my account with them because I think I may have made a mistake deleting everything from the old website...
I will try exporting as HTML and uploading with Transit and see how I go...
I'm sorry if this is a really silly question, but how do I check if I'm uploading to the correct directory? I have a feeling this is where my problem is... how do I know which directory I am uploading to?
Thank you again!
Harriet. -
'dimension attribute was not found' error while refresing the cube in Excel
Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.
Maybe you are looking for
-
Vendor Payment Issue - Cheque Assignment
Hi, I am facing one of the issue related to vendor payment. Issue description is as below. 1. We do have weekly payment parameter creation (F110) and one of the parameter was created on Wednesday. 2. Another job use to run for that parameter
-
It seems like my Sync has disappeared - how do I access it?
''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1046882 /questions/1046882]'' Reinstalled Firefox and logged in to Firefox sync. Not syncing properly - not at all, in fact. Everything is original, n
-
Currency INR convert in EURO currency in MIRO
Hello MM Sapperu2019s, Let me know the reason from forum when I enter the tax code in MIRO autoamcaally the Currency INR convert in EURO currency. Please provide your inputs what could be the reason for this and how I can resolve this case. Cheers, K
-
error message pops up - with every move of the game - VERY annoying. an unexpected error has occurred. Requested url not found : 400 i have cleared the cache - i have disabled AVG - suggestions i found on web, other ideas?
-
Not able to delete album in iPhoto. I try via iTunes and same result. Thank you for your help.