CS3 Extended or CS3 for use with LR?

CS3 Extended refers to an interface to Lightroom; however, I've found I can use CS3 to edit and save back to Lighroom. If all I'm doing is using plugins in CS3 to do noise reduction and sharpening, and CS3 to print, why would I need Extended?

Photoshop CS3 Extended is not intended for still Photography. It would be better used in motion Photography (the Movie Industry). PSCS3 Extended can be used for creative work to compliment Adobe After Effects which does for motion Photography what Photoshop does for still Photography.

Similar Messages

Where can I download Acrobat Extended version 9 for use with a single user license?

Hello,
I am helping a client who has previously purchases a single user license of Acrobat Extended version 9. It shows up under 'My Products' for his Adobe ID account and provides the serial. However, no version of Acrobat I have been able to find on the Adobe.com website or from people asking the same question on these forums will accept his Serial #.
Has adobe made these single user serial #'s invalid due to their change in licensing format, or I am just now finding the correct version to go with this serial? Please assist, I would hate to have to tell this client they have to re-pay for a product they already have purchased simply because you have changed your licensing format.
Thanks,
JC

JC you will want to utilize the installation media you received at the time of purchase. If you choose the download option at the time purchase then the download would be available under your account at http://www.adobe.com/. You can find more details at Find a download link on Adobe.com.

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

Problem-Starting InDesign Server for use with CORBA / Java and IOR file not generated

I'm trying to start Indesign Server cs3 for use with Corba, as per the document the server should generate the start-up message like this..
InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
[server] Writing IOR to ... and it should generate the IOR file
but I'm getting the usual start-up message and the IOR file is not generated, I hope IOR file is required for Java component interaction with IDS, kindly help me to solve this.
Thanks in advance.

[From Susan Doan, who is having trouble posting to the forum today}:
It looks like the example command line in the "Intro to InDesign Server" pdf is using curly quotes instead of straight quotes. If you copy the command from the pdf and paste it in your command shell, it won't work because of the curly quotes.
You can run the command without the quotes as Rich has said, but, as will all command lines, if your path contains a space, you will need to put quotes (straight ones!) around the path.
Thanks,
Ole

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

Headphone amp for use with i-mac

Hi,
Im looking for a headphone amplifier for use with my i-mac and logic 9, im using a pair of sennheiser HD 650's, can anyone recommend one?
Thanx...

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

Extended Purchase Info Record using with LSMW

HI guru's,
How to extend purchase infor record using with LSMW programm.. what is the T.Code and important fields.
regards
JK

Hi,
You will need to create an LSMW programme for this, the source fields will be as below
LIFNR     Account Number of the Vendor
MATNR     Material Number
EKORG     Purchasing Organization
WERKS     Plant
MAHN1     Number of days for first reminder/urging letter (expediter)
MAHN2     Number of days for second reminder/urging letter (expediter)
MAHN3     Number of days for third reminder/urging letter (expediter)
APLFZ     Planned delivery time in days
UNTTO     Underdelivery tolerance limit
EKGRP     Purchasing group
NORBM     Standard purchase order quantity
MWSKZ     Tax on Sales/Purchases Code
NETPR     Net price in purchasing info record
WAERS     Currency Key
LTEX1_02     Long Text
LTEX2-02     Long Text
LTEX3-02     Long Text
LTEX4-02     Long Text
LTEX5-02     Long Text
LTEX6-02     Long Text
LTEX7-02     Long Text
Regards
Merwyn

HT4356 Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

It sounds like the features are working through the USB connection rather than the wireless connection since it is still not seeing the networks.
Everything points to a hardware failure since the steps provided through the private message did not work and the wireless test showed it had failed. Sorry.
You do have some options at this point.
If it is under warranty, either standard or extended, you can contact HP support at 1-800-474-6836 to have it serviced under warranty.
If it is out of warranty, you can still contact HP support to find out all the options and the cost of each option. However, it is my opinion that this money would be better spend being applied towards a new printer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How tune flash player 9 for use with proxy

I use me browser with proxy. But flash player, when i show
yourtube etc, use direct connection and not use proxy server. How
tune flash player (last fersion, 9) for use with proxy. I want what
all traffic go over proxy

Will alienate? They've already alienated users a long time
ago. That isn't the point, though, because it doesn't matter if
users are alienated, it only matters if the users need flash.
The only thing that could make flash player better is open
source. I don't see why they don't do it. They make money on the
authoring tool, not the player. All of my Linux machines are ppc
and x86_64, no flash there. I also don't have flash on my PDA, a
Palm T|X. If the player was open sourced, people would stop
complaining about how much flash sucks -- because, right now, there
are very serious, legitimate, complaints against it.
Anyway, for now I'm hoping that SVG matures quickly.
Although, I"m sure that once Adobe sees that train coming, they
will extend Flash (dev.) to export SVG movies containing embedded
binary data that can only play with their binary plugin.

Extender 1.4 to use with 70D and EF 70-200 f/4 IS. Any compatibility problems?

I am planning to get the Extender 1.4 to use with my EOS 70D and the EF 70-200mm f/4 IS. Are there any compatibility problems with this combination?
Solved!
Go to Solution.

ebiggs1 wrote:
"... they will work perfectly together."
Perfectly may be a stretch but, yes, they will work as well as the combo can. Anytime you add something like a tele exrender you have to give up something. In photography you give to get. There is no free lunch. Fortunately you are starting out with a pretty good lens and can afford to lose an f-stop and some IQ.
Let me pose a slightly different question. Suppose you already have (as many of us do) a 70-200mm f/2.8L IS II. Suppose you add the 1.4 tele-extender. The combination would result, I believe, in a 98-280mm f/4, a potentially useful lens that doesn't appear in Canon's lineup. So given the cost of the TE and the image quality of the combination, is buying the TE a smart move?
Note that buying the TE does not compromise the 70-200 in any way, since it's still as good as it ever was without the TE. The combination, for the price of the TE, stands or falls on its own.
Bob
Boston, Massachusetts USA

Import "general use" certificate for use with Exchange

Usually (that's the way I've always done it), we create a certificate request on the Exchange server, submit the request to the certificate authority (preferably a 3rd party public CA) and then import and enable the certificate for the appropriate Exchange
functions: IIS, SMTP, IMAP. POP, for example.
What if the company already has a wildcard certificate obtained for others uses or general use (that's how it was described to me).
It was suggested that we might just use that certificate...
I think it would be best to "go by the book" and proceed as mentioned above (creation of cert request on the Exchange server, submission to CA, and so forth). After all, you can obtain a certificate appropriate for use with Exchange for just over
$50.
But is the other option even possible?
I know you can export an Exchange certificate obtained by what I believe to be the preferred way and import it on another Exchange server or on a ISA/TMG machine.
But could you export a certificate from an Apache web server or a firewall device or... just something else, and use it for Exchange?
This article seems to suggest you could:
http://www.sslshopper.com/move-or-copy-an-ssl-certificate-from-an-apache-server-to-a-windows-server.html
But from what I know about Active Directory Certificate Services, there are all kinds of templates for various uses (disk encryption, email, code signing, etc.), presumably not interchangeable.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

So you want to export the existing wildcard certificate from a non-Windows system and import it to the Exchange server, correct?
The article shows that openssl will create a PFX (PKCS#12) file - so this should work.
I would not worry about templates. If the existing certificate is a SSL certificate (Extended Key Usage = Server Authentication) it should be OK.
From "PKI Best Practices" perspective / "what a certificate actually is intended to be" it would be better to have a dedicated certificate including all the Subject Alternative Names needed by Exchange - but I know there are limitations to a certain number
of names by public CAs. But theoretically if you ever wanted to revoke this wildcard certificate you would get into troubles as the same certificate is on very different systems.
Elke

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows. The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.

HT3529 Is there a way to create, store and use preset messages for use with "Messages"?

Is there a way to create, store and use preset messages for use with "Messages". I often have a recurrinig message to send, after a repeating event, and need to enter the same short message each time. It would be nice to have this short message stored and selectable so that I do not need to enter each time.

found an answer that seems to work:
https://discussions.apple.com/message/17997300#17997300

Can i buy an iPhone at a pawn shop and get it unlocked for use with Straight Talk wireless?

Just wondering if I can buy a used iphone at a pawn shop or on ebay and get it unlocked for use with the prepaid Straight Talk wireless service? If so, how much would it cost to get it unlocked?

PHones can only be unlocked from the carrier; if you're looking for an unlocked device I'd recommand buying it directly from Apple as that is the only way to promise it is, if you buy it second hand you may find it is locked to a carrier who doesn't support unlocking, or worst yet activation lock

CS3 Extended or CS3 for use with LR?

Similar Messages

Maybe you are looking for