CS3 extended vs ORF

I recently purchased a new computer and had my Photoshop CS3 extended activated in the new machine.  I have successfully used the product for 5 years. Had to move to to new computers twice. This time was different.  Now my S3 does not recognise my RAW images taken with Olympus E series cameras.  What happened??

Welcome to the forum.
Have you updated the ACR (Adobe Camera RAW) module in Ps?
That will get you the greatest number of cameras, up through CS 3.
I do not know about your Olympus camera, but you can check to make sure that it is supported in the last ARC module for CS 3.
Over time, Adobe drops support for older versions of Ps, as it adds new cameras to ARC, so CS 3 will only support cameras up to a point.
For the very latest version of ARC, you will need Ps CS 6 (or perhaps CS 5/5.5 - I just do not remember the cutoff). Here is the Adobe Camera RAW Web page: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
Good luck,
Hunt

Similar Messages

  • Adobe Photoshop CS3 Extend Error

    I had to re install Adobe Photoshop CS3 Extend but now every time I try to start it, it errors out withe the following:
    "Could not load the user measurement data point presets file because the file name was not valid."
    and "Could not load the user measurement scale presets file because the file name was not valid."
    Any assistance would be appreciated. Thanks!

    (no reinstalling doesn't reset the preferences...) :)

  • Bridge not functioning in PhotoShop CS3 Extended

    I deactivated Photoshop CS3 on a computer I was no longer using and installed it (CS3) another computer.  I activiated CS3 on the new computer.  However, when trying to use Bridge, I get a message that says that Adobe no longer supports Bridge Home and Bridge does not function on the new computer. Is there anything I can do to get Bridge to function as part of CS3 Extended?

    Thanks, that worked. 
    In a message dated 12/28/2011 10:13:56 P.M. Eastern Standard Time, 
    [email protected] writes:
    Re:  Bridge not functioning in PhotoShop CS3 Extended
    created by Curt Y (http://forums.adobe.com/people/Curt+Y)  in Bridge 
    Windows - View the full  discussion
    (http://forums.adobe.com/message/4107610#4107610)

  • I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

    Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

    check compatibility first, http://roaringapps.com/apps:table

  • Upgraded to Snow Leopard & am not able to launch PS CS3 extended. Says I need Java SE 6 runtime.

    I just upgraded to Snow Leopard (OS 10.8.2) from Lopard and am now not able to launch Photoshop CS3 extended. I get a warning that says: To open “Adobe Photoshop CS3,” you need to install a Java SE 6 runtime. Would you like to check for and install one? But when I click on "Install" I'm told it is currently unavailable. I need PS to work! What can I do!?

    Manually download and install it from Oracle.
    M;ylenium

  • Adobe Photoshop CS3 Extended on Windows XP Professional

    Topic: Selecting
    I have been using Photoshop Elements 4 until I just purchased Photoshop CS3 Extended. In Photoshop Elements 4 there is a selection brush, enabling you to make pixel by pixel selection (if desired). There seems to be NO counterpart in CS3 - - which seems impossible for so powerful a program. In that most of my work involves selecting very precise points of 1 or 2 pixels, how can this be done?
    Please help.
    Thank you

    Dave Milbut:
    Thanks so much for responding . . but, unfortunately does NOT work again! I did exactly as you suggested in that I made a selection fir so that I could get a quick mask. When I double-clicked on quick mask in the tools pallet, NO options appear that say "Paint on selections" nor "paint on mask". The options is get are "Color indicates Mask Area or Selected area" and you have to chose one. The only thing you are actually choosing is whether you want the color to appear on the mask you chose or inversely to appear on the remainder of the object. The "black" brush remains the same and does not change.
    If I do not learn how to make minute selections (so that I will be able to act on only tiny tiny areas) I will not be able to use this program after spending a million dollars for it. It looks like Adobe could make something so fundamental (available in Elements) available here.
    Could you help me further . . . PLEASE !
    Thank you.

  • Adobe Photoshop CS3 Extended Trial

    Hi guys, I've recently downloaded Adobe Photoshop CS3 Extended. When I select the trial period for 30 days instead of buying the product, it says that Adobe cannot continue and it's having trouble loading the trial. I reinstalled it and restarted my computer, like it said, and nothing worked. Please help, I cannot afford Adobe Photoshop CS3 Extended right now, and I do not support piracy at all.

    I've tried to install the program from a different directory, I think my windows installer is crashing every time i try to install it, maybe I find a working hotfix for it.
    I followed these steps when i tried to install ps:
    http://666kb.com/i/b1qwvm0mq1zs8iekm.jpg
    First I downloaded it to C:~~/Downloads (1.)
    Then I extracted this file to C:~/Desktop (2.)
    Afterwards I got these files (3.)
    After clicking on setup.exe this window (4.) appears and disappears right after
    Danke für die bisherige Hilfe
    aus der Alpenrepublik
    Fabs
    /edit:
    To unregister and register the msi hasn't solve my problem.
    Now I am trying to run the sfc /scannow command.

  • Adobe Photoshop CS3 Extended Activation Problem

    Hi all, hoping someone can help me.
    I have a legitimate hard copy of Adobe Photoshop CS3 Extended which was only recently taken out of its sealed package.
    On installing and trying to activate I get an error. Now i am left with a window telling me "Registration Unsuccessful"
    Any ideas how i can go about solving this? I legally own this copy and I need to use it and can't do with it deactivating.
    Thanks in advance for any help given. It's very much appreciated!

    Mordynak I am sorry but I find no software titles registered under the Adobe ID/e-mail address you used to post to this forum.  From this discussion it sounds like you have already utilized the process listed in Find your serial number quickly.
    Please contact our support team directly at Contact Customer Care.  If this link still fails then I would recommend utilizing a different web browser as the current add-ons, security settings, add-ons may be preventing a chat session from being made available to you. 
    If you continue to face difficulties then please update this discussion.

  • Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

    I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses).  I did a completely fresh install of Windows 7 Ultimate 64-bit.  I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
    Google searches aren't turning up anything.  When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears.  However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar.  I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there.  I tried uninstalling and reinstalling.  I tried upgrading to CS3 10.0.1.  Nothing works.  The application simply freezes before it gets anywhere.
    I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today.  Go figure.
    Edit:  I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects().  The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function).  There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

    Log Name:      Application
    Source:        Application Hang
    Date:          7/17/2010 6:16:25 PM
    Event ID:      1002
    Task Category: (101)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Description:
    The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: d0c
    Start Time: 01cb2616be79e36f
    Termination Time: 2
    Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
    Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Hang" />
        <EventID Qualifiers="0">1002</EventID>
        <Level>2</Level>
        <Task>101</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
        <EventRecordID>1615</EventRecordID>
        <Channel>Application</Channel>
        <Security />
      </System>
      <EventData>
        <Data>Photoshop.exe</Data>
        <Data>10.0.1.0</Data>
        <Data>d0c</Data>
        <Data>01cb2616be79e36f</Data>
        <Data>2</Data>
        <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
        <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
        <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
      </EventData>
    </Event>
    And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
    My Visual Studio analysis was far more informative.  All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related.  I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start.  That also did not work.
    (And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
    Edit:  The timestamp above might be a little odd-looking.  I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report.  Mostly I just skipped that part of killing a process.

  • Problem Reading Adobe Photoshop CS3 Extended In Windows

    I have Windows 7 and Photoshop CS3 Extended; can't read .psd file; error says not a supported file type; need to work with layers. When installed, received a Successful message upon installation. A solution to reading .psd files in Windows?

    Thanks to both of you for responding.  The files I am referring to are loaded to my C drive from ADOBE PHOTOSHOP CS3 "CLASSROOM IN A BOOK" tutorial.  On the cover, it says "The official training workbook from Adobe Systems".  I don't know what to do at this point.  I'm ok with Html. Just need photoshop knowledge added and understand usde of .psd files provides a means to work with layering.  Any suggestions?

  • Trying to install Photo Shop CS3 Extended on Windows 8 and keep getting database corrupted

    Hi, I am trying to install my Adobe Photoshop CS3 Extended on my new Windows 8 OS 64 Bit computer. The CD does not have a scratch on it, it is like new. I get the error database is corrupted. Contact Adobe Support.
    I went to the Adobe website and downloaded the updated installer, same error. I tried running the installer in Windows XP compatibility mode, it looks like it installed, but when I run I get database corrupted.
    I could really use some help.

    Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 3 products

  • What is wrong with my Photoshop CS3 extended?

    Hello. I don't understand what's wrong with my CS3 extended, but i don't have Render filters under Filter menu. Have everything else but no Render. Anybody ever had same problem?
    thank you

    >
    "probably bad version of photoshop...
    Very possible if you didn't buy it from an authorised dealer. There have been some very convincing counterfeits being sold all over the world, and one of the tell-tales is that not everything in the application works and /or there are things missing from it.
    Does the disk or the packaging have "Printed in Singapore" on it?

  • I have PS CS3 Extended discs and serial number but do not have a CD drive on my new computer.  How can I download it?

    I have PS CS3 Extended discs and serial number but do not have a CD drive on my new computer.  How can I download it?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Error "Licensing for this product has stopped working" when starting Adobe Photoshop CS3 Extended- XP Pro AMD; 2GB RAM

    I have exhausted all known options thus far.
    I started the Flexnet Licensing Service and restarted the system but the message continues to come up when lanching PS CS3 extended
    After restarting computer the Flexnet  Licensing Service stops again and goes into Manual mode. This also happens after a few minutes without restarting.
    I also downloaded the Flexnet Licensing Recovery Kit from Adobe Support but the file stops after saying  "please wait for a few moments.. ?"
    I changed the setting as discribed for the Flexnt folder but the message continues to come up when PS Extended CS3 is launced.
    http://kb2.adobe.com/cps/401/kb401528.html
    What else is there to do. Please help me as what I can do so I can continue to use Photoshop CS3 Extended.
    Thank you

    I downloaded the clean Script file and followed the instructions from what the Clean Script read Me file described.  The first step said to deactivate. Although I was not able to deactivate because of my original message, I followed the remaining steps.
    After using the Clean Script and uninstalling Photoshop CS3 Extended and re-installing it I re-booted my computer. I also deleted the CS3 Application data files.
    When I installed PS CS3 Extended the installer does not ask for the serial number on all attemps. I bought a registered copy of PS CS3 Extended. Is there another way to approch this licensing error.
    Thanks.

  • Adobe CS3 Extended - problem w Bridge - picture displayed wrong in Horrizontal Filmstrip mode

    Recently started have problems with Adobe Bridge (CS3 Extended) after it did an automatic update from Adobe for my CS3. The problem is that the panel where the picture appears in "Horrizontal Filmstrip" is now positioned to the far right - partially off the screen; plus, whatever action done previously is showing through the panel area where the picture should have been. Doing "refresh" does not help.
    Tried to reinstall the whole program but the problem did not go away.  Then uninstalled the whole Adobe CS3 suite (which includes Bridge); then reloaded the probram; and, then the problem went away. As soon as I downloaded the updates from Adobe again, the problem reappeared. Anyone no what to do?

    Did you try to reset the preferences by holding down the ctrl key and starting Bridge?   You will get a reset window, choose all 3 options.
    A re-install will not affect this file so if contaminated before it will be contaminated after.
    Also, make sure you have the latest video driver, as this affects the filmstrip mode.

Maybe you are looking for