CS3 Hangs Open a File from a DVD

I was opening some images from a DVD and everything was ok. Then Photoshop hung up and I had to force quit. After that I could not open any files even ones on my local drive. I launched other CS3 apps and they worked fine opening from both the DVD and the local drive. I launched Photoshop and created a new image and tried to save it and it hung up. Finally I launched photoshop and quit it without trying to open anything, then launched it again and it worked. I also had rebooted the machine at times in this sequence.
A few days later I put a DVD in and it happened again. This time nothing worked until I removed the DVD from the drive.
Every application can read and open files from the DVD drive including other Adobe apps. I am not sure if this is an issue with Photoshop CS3 or the drive. Can just Photoshop have trouble accessing the drive?

Gary,
There have been several reports here of folks who have problems using their computers (and/or Photoshop) if there is a disc in the drive as you have. As I recall, the solution (or workaround, if you prefer) is simply to copy whatever files you need for the day's session off the disc onto your hard drive. Remove the disc from the drive.
Neil

Similar Messages

CS3 wont open .psd files from Lightroom

I am working on a Mac in Lightroom 2.6, when I use the keyboard shortcut for open or toggle a file to open in CS3, the menus open alongside of the CS3 window but the images itself is not opening. I attempted to use the selection edit in CS3 without success also. I am able to use the selection edit in Photoshop Elements and the image opens in Photoshop Elements and I am unable to get the files/images to open in CS3. I might have struck an errant key at some time. I am about to pull what little hair I have left out. If anyone has the cure or remedy, it will save me from being bald thanks

Right-click on the psd in LR and select 'Edit in PHotoshop'.That will open it in Photoshop with its current filename or a new filename with Edit added to the end, with or without any LR edits you may have added to it.
Bob Frost.

Excel 2013 hangs while trying to open a file from network share

Hi,
I am having issue opening excel file from a network share. it happens randomly, the file opens and hangs abruptly. Nothing happens after that ( we can only move the cursor), if we click on the excel sheet we get a beep sound. after i kill the excel process
and open it again ,it works fine.
Where did the member use the Excel file? Local disk, SharePoint, File server, or network shared disk?
       Network shared file and sometime locally
Does the issue occur in the special file or every file?
      it happens randomly and the whole excel freezes. i have to kill the excel session.
Which Office version is the file created? Excel 2013 or early? If it is XLS format, please try to convert to XLSX to test.
   Network file server has office 2010 and the user is trying to open it in excel 2013
Does the file have some macros?
Yes, they have macros in some files
Does the issue occur recently? If it is, have you installed some programs or update before you encountered it?
       it happened before too.
Do you get some error message when Excel crashed?
Yeah. Attaching the error message from event viewer. We get file corrupt errors and below too.
Please suggest

Hi Suren424,
Since your first image showed that "To see if more information about the problem is available, check the problem history in the Action Center control panel." Please go to this path (Control Panel\All Control Panel Items\Action Center\Problem Reports)
to check the detailed information, and you might upload the screenshot or info here.
Then, please try the following methods and check if they are helpful:
1. File --> Options --> Advanced --> uncheck "Ignore other applications that use Dynamic Data Exchange (DDE)"
2. Turn off "Protected View" --> (File –-> Options –-> Trust Center --> Protected View --> Uncheck all options
3. I notice that >>Network file server has office 2010 and the user is trying to open it in excel 2013 <<, it also might be caused by the Microsoft Office File Validation for Office 2010, please try to change setting in server with
the link:
http://support.microsoft.com/kb/2501584
If you have any update , please feel free let us know.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Can't Open jpeg files from Bridge CS3 to PhotoShop CS3

This is really weird. I had a trial version of CS3 and bridge worked fine. That ran out, so I tried CS2 to see if I could get by with the older version. CS2's bridge worked just fine.
Then I installed a full version copy of CS3 and removed CS2 (to free up space) and for some bizarre reason, I cannot open any files from bridge into Photoshop. It's the CS3 bridge because I clicked on the Help, About Bridge and it showed CS3.
When I just click "open" under file, it tries to open with Illustrator. When I click, "open with" I get this list: Adobe Illustrator CS3 (default), Firefox 2.0, Internet Explorer 6.00, and Paint 5.1.
I can't figure out a way to change the default to CS3, and it worked fine with the trials.
Please advise.

It was a nice thought. I just did it, and associated all .jpg type files with photoshop, but no such luck in solving issue. I did figure out a way around it that kinda works, but not nearly as convenient. I drag select a group, then hold-click on the group and toggle into Photoshop, then let go. It pastes the group there. However, if I control click to select a group (or deselect within a group), I can't hold-click. So I have to do smaller groups at a time if I want to bypass certain pictures that get grabbed in a bigger group--does that make any sense at all?

I opened RAW files from D800 accidentally in CS3 (on old laptop) and are unable to open them now CS6. How to open them?

I opened RAW files from D800 accidentally in CS3 (on old laptop) and are unable to open them now CS6. How to open them?

Sorry, yes this is Microsoft Excel. The Microsoft XP has Excel files denoted as xl, the later versions of Microsoft Excel are denoted as xls files. The later verions of Microsoft Excel open the xl files OK, does Excel for Mac not able to do this?

Can't open INDD file from icon

I have an installation of InDesign CS3 (upgraded from CS2) that won't let the user open a file from it's icon. You get the error message of "<filename> is not a valid win32 application" The file will open if you open InDesign and use the file open menu. The icon isn't the InDesign icon either-looks like a doc file icon without Word installed. I've gone into File Types (from the Tools-Folder Options-File Type window) and tried to manually made the indd file open with CS3 but that still didn't work (oddly when I try to use the CS3 icon it too has a generic .exe icon).<br /><br />If I log in as myself (admin rights on the Windows XP) and once I did the above it worked for me. I gave the user full rights and tried the above again but it didn't work-still wouldn't open by clicking on the icon-just keep getting that error message. Any help would be great as I can't seem to come across anything googled that is helping.

This is a follow-up. My question has been answered in that did get to open the file as follows:
By trial and error (based on responses) basically I was able to open the file as a copy from inside InDesign. There are three options in the lower left had corner of the window, I picked copy after trying the other two. Up until this time I could not find any idlk file.
Once I opened the file I backed it up and made another copy that I opened. I went back to the original file and tried to open it from finder. It would not open. Still no sign of the idlk file. But when I went back to open the work copy it opened but now the idlk file popped up in the finder and it continues to do so every time I open any file associated. This idlk file comes up with an icon that says "Locked"
My only question now: Is there a way to unlock this file from whatever it is linking to? Does it make any difference at this point?
I have learned this is a temp file of sorts that prevents changes to the original file. I would like to unlock the file so that it not connected to anything.
I have moved or deleted all files that it might be linking to. I have shut down other computers and hard drives using the same network. The idlk file come up every time. It goes away when I close the file. I have also deleted it while the file is open. I deleted all attempts at creating Book files. I'v been through preferences and checked Assignments. It seems like once you make a copy of a file, the original is always looking for the copy? Or the copy for the original?
So I'm working and making separate files for each chapter so that I can set up a book and have back-up and maybe create a whole new Book file that isn't linked to anything else but maybe that's not necessary.
I've been working with InDesign for a long time and never encountered this phenomenon before.
Thanks again for your responses.
Jim

Having issues opening raw files from Canon 5D Mark iii in Photoshop CS5

I cannot open RAW files from a Canon 5D Mark III in Photoshop CS5. I get an error saying "
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information."
Documentation seems to be no help.
Any ideas?

You can download the updates manually and try to install them Adobe - Photoshop : For Macintosh
If you can not get CS5 updated you may want to consider Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Search Results
1 (800) 833-6687Adobe Systems, Customer service

Cannot open NEF files from D200 in Camera Raw 4.1

I am using Photoshop CS3 with Windows XP. I have downloaded the latest Camera Raw update (4.1) and installed as directed.
I am able to open Raw files from Nikon D70 in camera raw but unable to open files from D200 - I am getting the message that it is an invalid file.
When I revert back the the previous version of camera raw I can open these files with no problem.
Can amyone advise please.
Thanks
J

Janet,
> I am not using Photoshop 6, where did you get that from?
We are referring to Trevor in post #2, not you.
As to your issue, just a general comment, as I don't do Windows:
Even though it sounds too obvious, make sure you have properly uncompressed (unzipped) the downloaded ACR 4.1 and that you have installed it according to the instructions.
>I have downloaded the latest Camera Raw update (4.1) and installed as directed.
Note that you didn't say "unzipped", so forgive me for bringing it up.

Can't open cr2 files from my 5D but can from my 20D

i just got a new computer (windows vista) and on my old computer i could open cr2 files from both my 20d and my 5d just fine. but now on my new computer i can't open the cr2 raw files from the 5d but can from the 20d. I have photoshop cs2. I am not planning to upgrated to cs3 anytimes soon, do I just need to install a plug in? Please help.

Kristen,
No, no, no. The DNG Converter is a stand-alone executable program. You can even put it on your desktop. You would need it only if your camera model is NOT supported by ACR 3.7, which is the latest version you can use with Photoshop CS2.
In that case, you would use the DNG Converter to convert your raw images to DNG files first and then opening the DNG files in ACR 3.7.
Now, the ACR 3.7 plug-in has to be installed in the correrct location, which is where the old ACR plug-in resides. You will be replacing that old, obsolete ACR plug-in (while Photoshop is NOT running).
[The default Photoshop installation comes with and installs that obsolete ACR plug-in.]
Read the instructions on the download page very carefully, and refer to the FAQs of this forum on the same page where you added this topic.

Can't open raw files from Nikon d800 in PS CS5 and can't update Camera Raw plug-ins

Can't open raw files from Nikon d800 in PS CS5 (Win7 64-bit). It says, the model not supported by Camera Raw. Tried updating Camera Raw plug-ins for d800 but keep getting error message: Update failed, Adobe Application Manager may be damaged. Re-install the latest application manager but still the same error message. How to fix?

These links may help
Adobe - Photoshop : For Macintosh
Adobe - Photoshop : For Windows
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

How to open an alias from a dvd

How to open an alias file from a dvd that was burnt on another mac.

An alias will only open if the original file is available. What message do you get when you try to open the alias?

Open pdf files from button

Hello, please i need help with my problem. Is there any way to open pdf files from button? How can i set this in DVD Studio? Thanks for your answer.

Just to pick up from Shawn - even if you do use DVD@ccess you cannot use a button to launch the link, you have to use a full menu. In practice, you use two identical menus and set the button for the PDF to go to the second menu, which is set to time out very quickly and jump back to the original menu. It gives the visual effect of a button launching the asset, but in fact it was the opening of the second menu which did the trick.
And just to emphasise what Shawn rightly said - don't use DVD@ccess. It is at best unreliable and for many PC users won't work at all. It is far better to add the PDF as ROM material and put a message on a menu screen that tells the user there is additional content on the disc, and how to access it. This has the added advantage of letting those using a set top player know the material is there without frustrating them that something doesn't 'automatically' work (you can't open a PDF on a set top player, only on a computer player).

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

Is there a way to open Excell file from the server and display in the UI and save it back on to the

Hello there,
Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

Hi Mike,
Welcome you to the forum.
You may try:
SELECT * FROM MyDBNameHere.dbo.OUSR T0
Thanks,
Gordon

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version? . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
Thanks.

A Good samaritan answered this for me on another forum
How to update Camera Raw

CS3 Hangs Open a File from a DVD

Similar Messages

Maybe you are looking for