[CS3] How can you get the effectivePPI or similar for an EPS?
Hi!
Is there any way of getting out the equivalence of effective ppi for an EPS image?
Trying to read it out by the effectivePpi[0] results in:
Error: A value is not available for this type of image.
It's not present in the info palette of the user interface (and then of couse not in the scripting model). Is there a way of calculating it?
I can get the absoluteHorizontalScale...
Need to know if the image conforms to a certain standard, and the input is the required (effective) ppi, such as 300 ppi.
Kind regards,
Andreas
No, they are photos (bitmapped) and they all seem to be saved in Photoshop.
I opened some of the files with notepad, and read the first lines. I find the words: "Adobe Photoshop CS Windows".
I also notice another thing about these troubeling files: they all have the following text in the Info panel in InDesign:
"ICC Profile: CSA".
Hmmm... could this disturbe the ppi property?
If I save the file under a new name, and uncheck the "Postscript Colour Management" checkbox, the result is an EPS file with readable PPI values!
Do I have to tell my customer that she has to save all images without Postscript Color Management?
Kind regards,
Andreas
Similar Messages
-
We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?
Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben -
How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?
Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that. -
How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.
You can check the file prefs.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and remove the line(s) related to that extension (procon.password).
-
How can you get the keypad on a USB keyboard to work in Excel
How can you get the keypad on a USB keyboard to work in Excel for Mac. Mouse keys is disabled/unchecked, but cannot get it to work. Even tried downloading a 'num lock' app and it didn't help.
Hi Michael-
I do not have any problem with using shift registers in timed loops. What version of LabVIEW are you using? Can you please elaborate on why neither shift registers or local variables meet your needs? I have attached a VI that saves a previous iteration and then computes and displays the difference. Let me know if you have problems running it.
Thanks-
Tom W
National Instruments
Attachments:
TimedLoop_ShiftReg.vi 74 KB -
How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's iMac? I have a list of his passwords, but nothing works! I know his email, but that account has been cancelled for security purposes, so we can't just request a new one. I tried his security questions to no avail.
ThanksSince that password is tied to his Apple ID, you will need to contact Apple; as far as I know, it will be a somewhat lengthy procedure and you will need to furnish necessary paperwork (including a death certificate as far as I know). Best to either stop at an Apple store or call them to find out exactly what it is you need to do.
-
How can I get the template( word rtf ) for PO – Printed Purchase Order ?
I want to convert the “PO - Printed Purchase Order” report from Oracle rdf format to BI Publisher. I am looking for the template but could not find in UNIX.
As per the Oracle blog, the template is available. Please see the URL : https://blogs.oracle.com/xmlpublisher/resource/121BIPReports.pdf
The template code is POXPRPOL_XML.rtf
when I look at the $PO_TOP/patch/115/publisher/templates/US directory, I cannot find POXPRPOL_XML.rtf
How can I get the template( word rtf ) for PO – Printed Purchase Order ?
Thank you,
Biju Varghese.How can I get the template( word rtf ) for PO – Printed Purchase Order ? XML Publisher Administrator -> Templates
find by code or name
open it and you can downloadtemplate by "download" button -
I downloaded an album but one of the songs is corrupted, it only plays for about 4 seconds. When I try to re-download using the iTunes Store and "Purchased", it won't give me the option to download it again. How can I get the song I PAID for!!??
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
HT203200 how can I get the songs I paid for when I paid for a whole album and only got part of it
Today I purchased Rick Dankos album but some songs were left out how can I get the music I paid for ?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
How can you get the mail boxes in yahoo onto the e.mail app
How can you get your yahoo mail boxes onto the e.mail app on an IPad mini?
Go to the Settings App
Pick Mail, Contacts, Calendars
On the right side you'll see under the Mail section "Add Account”
Pick that and fill out the requested information -
How can i get the SMTP IP address for gmail
Hello,
sapian,
I want to schedule a webi document through BI Launch Pad to users email address gmail.So while configuring the AdaptiveJobServer in CMC i need to give SMTP details such as
Domain name:
Host:
Port:
So for scheduling a webi document to a gmail user i need the above details for gmail SMTP server.Can any one suggest me how can i get the above details for gmail SMTP server.
Thanks in advance.
Regards,
Kishor Kumar SHi Hrishikesh,
i have configured the 'stunnel.conf' file with the following details
accept =static ip address of the machine colon port number where the stunnel is installed
connect = smtp.gmail.com:465
and i saved the file.
when i go to
Start->Stunnel->service install
it is giving error as follows
Error binding ssmtp to (ip address and port number which i have given in stunnel.conf file 'accept')
bind: No error (0)
Can you suggest me the solution for the above error.
Thanks in advance,
Regards,
Kishor -
How can I get the directory.xml file for WL6.0?
I have installed the ALBPM Enterprise WL6.01 and started it in my server.But I get the error message when I login.
directory configuration runtime fails to initilize with
resource:/Aqualogic/j2eewl/tomcate/webapps/../../webapps/webconsole/WEB-INF/directory.xml
How can I get the XML file?aaa, ok i misunderstood your first post, i thought you are talking about unable to use the directory.xml from your application.
Ok, well the directory.xml file that ALBPM uses is allways in /albpm6.0/j2eewl/conf/directory.xml if we are not talking about Standalone. And when you start your albpm server it picks up the directory.xml file from there. But it picks him up only when you start it...so if you made any changes to it, you have to restart the server.
You should check the instalation folder of your ALBPM.
If you want to change the user/pass in the directory.xml change it in that folder and restart ALBPM.
If you don't know how to enter new password you have to use this sintax:
<encrypt>newPassword</encrypt>
Because if you open the xml file you have only <encrypted> tags, and you can't change those.
I don't know what the xml file is doing in that tomcat folder though...maybe it get's copied to that location when you start the albpm WL
Hope this helps
Edited by Lex_ at 12/13/2007 10:27 PM -
Hi!
Inserting a table, and autotagging it, I get a table with a number of cell elements in the XML Structure.
Selecting an item in the table, I can find the associated XML by the following line of code:
app.selection[0].associatedXMLElement
My problems begin when cells are merged. Then the associatedXMLElement for the cell returns null.
How can I find the associatedXMLElement for a merged cell?
Using the getElements makes no difference.
app.selection[0].getElements()[0].associatedXMLElement
(returns null)
In the XML structure I can see that the merged cell is still associated to an XML Element, which becomes underlined and also referrs back to the cell, selecting it when double clicking the XML Element link in the structure.
Is there no way to get to the xml element of a merged cell?
I have tested in CS3 and CS4 as well, and they act in the same way.
I also found a similar, unanswered, question from Anne-Laure Jallon in the "With CS3, some things have changed" ( http://forums.adobe.com/message/1105813#1105813 ):
Hello,
I'm working with VBscript.
Is there a difference between cell.associatedXmlElement in CS2 and CS3?
All my cells in CS2 had an associatedXmlElement.
In CS3, my table has an associatedXmlElement, but all its cells don't (The value is Nothing)
Is this a bug? Is it linked with XML evolution? Thanks Anne Laure
Adding some more info:
I made a test, by selecting the XMLElement in the structure, and from that object finding the cell, and finding back to the assiciatedXMLElement:
app.selection[0].getElements()[0].cells[0].associatedXMLElement
Result: [object XMLElement]
So that kind of "chain" works.
But with the merged cell as only reference, I can't find its associatedXMLElement. Any ideas would be appreciated.
Best regards,
Andreas Jansson
Message was edited by: Andreas JanssonIn my opinion, locate a cell according to his content is not so effortable. What happens if contents of more than two cells are equals?
I take xml elements of associated xml element of table and put them into an array.
This array contains associated xml elements of every cell ordered by cell positions into table.
Now, locate associated xml element of a cell based on its array position (index) is more reliable:
var myCell_cell = app.selection[0];
var myElement = myCell.associateXMLElement
if (!myElement || !myElement.isValid) {
var table = myCell.parent;
var xml_tab = table.associatedXMLElement;
var xml_cells_arr = xml_tab.xmlElements.everyItem().getElements();
var idx = myCell.index;
myElement = xml_cells_arr[idx];
Alex ;-) -
How can you get the car stereo to play songs on nano in order?
Hi--I just got an ipod nano and connect it to my car stereo via a usb port. No matter what controls I try (on the car) it just plays songs in alphabetical order of the song (regardless of the album title). How can I get it to play in the order I want (like one album at a time)?
Mine does. If you can browse by artist, album or song titles, chances are it can brwose through playlists as well. Also make sure that you don't have shuffle selected.
The iPod should play songs in the order that they are listed on the display. -
How can i get the driver and software for q1342a laser printer 1000
How can i get a driver and software Cd for HP Laserjet 1000 S/N#CNBJ242828
Product ID# Q1342AThe product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.
Maybe you are looking for
-
Sharepoint Designer 2010 and Visio 2013
I am testing out Visio Professional 2013. I can import a VWI file from Sharepoint Designer 2010 and I can export a VWI file from Visio. But when I try to import the VWI file created in Visio 2013 into sharpoint Designer 2010 it appears to work, as I
-
I wish to use the previous version not the one that has today been automatically installed. My settings were to let me know and I decide to install when I'm ready, how do I go back. This because one of the previous Plugins does not work with this ver
-
How do I show and hide a popup message by the program
Hi, I've the following problem. Sometime the program must wait to open a seriel port. On slow machines, this could take some seconds. During this time I'll display a popup message with the message "please, be patient....". After the port is open, the
-
Why material document not able to print automatically?
Hi, I think I have posted this question before, however, there is no answer, I will my luck again. I have setup all the necessary configuration in NACE with my new output type and output condition in MN21, yet the printing still cannot take place imm
-
What is the max number of WLANs in a WLC?
We are going to deploy centralized wireless with WiSM WLCs in our datacenter controlling LAP for all our locations (around 600 locations). We would need to create a common WLAN for all locations but also, we need to create unique WLANs at each locati