CS3 Indesign 5.0.2 - futura OTF now not showing in Indesign, does in Illustrator

using Futura OTF in an Indesign doc for the last few months. I opened the Indesign doc today and now Indesign does not recognize Futura OTF. The font is open in "FontAgent Pro" but is not recognized in Indesign. It does however recognize the font in Illustrator CS3, 13.0.02.
Any ideas why?

Where can I find these? suddenly I have exactly the same problem!!

Similar Messages

ITC Garamond Bold not showing in InDesign but OK in Photoshop/Illustrator

ITC Garamond not showing in Indesign CS4, Mac 10.5.8. But OK in Photoshop and Illustrator.
I removed the font cache and even used Fontnuque to remove all the fonts cache on my Mac to no avail.
Any idea? Thanks
Tobyfood

Thank you Buko, it work. Nice way to finish my week. Can enjoy my weekend now. Great tip.

File name does not showing the InDesign icon?

I have got few files from my client and they said it is an InDesign CS2 version file. but the file name does not showing the InDesign icon on the file name, though I have CS2 and I have tried other version too.
Also I could not open the file in any version.
Can somebody help me?

there is no screen shot...
You must either post a link to it on another server or embed it into a post using the camera icon on the web page like this:

TS3694 i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

From the article which you posted your question from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Text Wrap options not showing in InDesign CS3

Using InDesign CS3 on a Mac 10.4. I've had this problem for a couple of months now and it's getting past the point of annoying. When I open my text wrap options pallete it's blank even when I expand options. I can see the text wrap icons in my header panel, but I no longer have options to change the right/left/top/bottom margins. Just a general "add wrap" and "remove wrap". Is there any way I can get my pallete back? I've tried defaulting my tools, but still it does not show up. I don't know what to do to get it back.

Did you try resetting preferences? While pressing Shift+Option+Command+Control, start InDesign. Click Yes when asked if you want to delete preference files. If you don't get the message about deleting preferences, you weren't fast enough.
http://livedocs.adobe.com/en_US/InDesign/5.0/help.html?content=WSa285fff53dea4f86173837510 01ea8cb3f-6d1e.html
Ken

Tv programmes now not showing! Could they be stored elsewhere?

I have downloaded tv series and they were stored under videos, these have now disappeared , I have restored I pad and could see them being synced but still not showing, videos and films are there but not tv programmes , the whole folder is gone

Are the tv shows rented or owned (purchased from Apple) or are these your personal versions?

Traffic Lights For Hyperlinks panel not showing. INDESIGN.

My traffic lights for the hyperlinks panels are not showing and I have the latest version of CC. How do I show/hide them? Thanks

First, make sure you have InDesign CC 9.2.1. Choose InDesign > About InDesign (Mac) or Help > About InDesign (Windows).
If you're up-to-date, try restoring your preferences:
Trash, Replace, Reset, or Restore the application Preferences

Fonts not showing in inDesign

A am using (in two different offices) Extensis Fusion 3 and Universal Type Server 3 (UTS) and both are having the same issue. I am on Windows 7, 64bit with Adobe CS5 with Adobe font collection. All licenced and legit versions.
This issue has been happening for a couple years and I have finally had enough and need it resolved. Computers have come and gone, fresh installs etc etc but we are still having the same issues.
Randomly sometimes Indesign is not showing activated fonts in indesign. This usually happens with Helvetica Neue Light 45 for some reason but can happen to other fonts, usually the ones we need at the time.
The most recent case is that we cannot get the fonts we need (although activated) and we can see other fonts that are not activated?
Has anyone experienced this before?

Sorry that you're having issues with activation. Could you please contact support directly to diagnose the issue? It could be an issue with the font itself, and could benefit from inspection.
Contact support at: http://www.extensis.com/support
Regards,
Jim Kidwell
Extensis

Font in embedded swf now not showing in ie6

Hi There,
We've noticed that a .swf which was recently updated using CS5 no longer displays the font in ie6 - it was originally created several years ago in CS3 so we're wondering if something has changed with regard to the way Flash embeds fonts?
This tutorial looks fairly extreme for something so simple: http://www.adobe.com/devnet/flash/quickstart/embedding_fonts.html
The font is the Microsoft font Tahoma and we've updated our test machine to the latest version of Flash - but still no joy.
When I click various text in the Flash file, they're all set to the following in the properties panel:
- Classic Text
- Static Text
Is there a simple way to embed fonts or do you now have to create a font symbol and follow all the steps described in the above link?
Sorry, have just never noticed this before.
Any help or pointers in the right direction would be much appreciated.
Cheers

It should work just fine in IE6. You might want to make sure you don't target any version of flash higher than you absolutely need to. I'm not sure how extensively supported IE6 is with Adobe any longer.
If you're not using any dynamic text and it's literally all static then you don't need to embed the font at all. Flash does that for you automatically on static text fields. The user (as kglad said) does not need to have the font installed. The text is baked into flash as vector outlines.

HELP ! Ipod froze while syncing so I unplugged. Now not showing any music on Ipod or in Itunes but will show the songs in my ipod control

So basicly I was trying to figure out on how to get all my album art back on my 160gb Ipod Classic. It showed in itunes but not on my ipod. My cover flow was full of Question marks. Having 140gb of music ir was fustrating manually putting it back on to each album. This happened a few months ago. So the 5 or 6gb of new music i put on since this happened is on my Ipod and show in my coverflow on my Ipod.
It came to a point where i had to leave my computer and noticed that my ipod was still in a synchnnizing stage and seemed like it was frozen. Having to leave the computer I had to unplug the ipod. By doing so, when i turned it on it said that i had no songs on my Ipod. When plugged into my itunes it also says no songs but at the bottom of the itunes screen it shows there is 140gb of "other Information" with 1.5 gb remaining but not music. I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder. I have had a few different computers since this new ipod has music from ages ago from an old 30gb classic and have transfered over the years on multiple computers (so restoring or syncing to this computer is out of the question). Thus all the ratings and playlist are very dear to me. Hundreds of hours invested in this ipod OVER 6 Years. It seems like there is some file missing or needed to link everything together.
I have spent endless hours trying many diffferent aproches. Like one forum said go into AL'S IPOD>IPOD CONTROL>ITUNES.. when in there they said to look for a file called ITunesDB and another called ITunesD8.old and switch them and rename ITunesD8.old_mlpmp but i only have the ituned DB not the ItunesDB.old
I also tried
Also when i plug in my ipod a notice in windows says "DO YOU WANT TO SCAN AND FIX E>AL'S IPOD
                                                                                      There might be a problem with some files on this device or disc. This can happen if you
                                                                                       remove the device or disc before all files have been writen to it
                                                                                      SCAN AND FIX (RECOMMENDED)
                                                                        this will prevent future problems when copying files to this device or disc
                                                                                                           OR
                                                                                            CONTINUE WITHOUT SCANNING
So i figure the problem started when i went into my control panel and chose show all hidden files so i can look at my files in the Ipod_control and was fooling around with the preference area by selecting the read only icon and disabling the hidden icon. I tried reversing this before ejecting my ipod but it was stuck in the Synchronizing do not disconnect mode and would not eject. Everytime i did try to eject it said in itunes with a yellow triangle saying " files or folders are in use in another area and cannot eject" even tho everyting has been closed......
ANY IDEAS ON HOW TO FIX??????? THANKS FOR YOUR TIME

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

Internal HD dies, reinstall OS, now not showing up at all

My internal HD stopped booting but was showing up in Disk Utility. I tried to fix the problems and eventually got a message that the disk was fine. It still would not boot. I used the 10.4 OS DVD to do an archive and restore which after working all night left me with a blank screen with a spinning beachball. Now the internal HD doesn't show in Disk Utility at all! It doesn't show up in Terminal with df either. Help!

I hope you backed up before this happened.
Okay solution to get info back.
Go to ebay and get one of the laptop hd to desktop hd connectors about $6-12 or a USB/FIREWIRE ($25 max) external enclosure for 2.5" drives as then you can install a new drive and still try to access it via USB/FIREWIRE
This will work if you have a desktop Win or Apple and then you can use a descent software to access it.
If not then send it to the manufacturer and then can make a backup for you or take the disc platter looking like a dvd / cd and place it in a new working device so you can get access as likely the motor died on the hd or the circuit board/firmware is bust but the disc platter might be in tackt.
Good Q? does the drive spin up ?
I have seen that a good format "erase can get life out of it " but it does not help for info/files.
PS: if you have tiger do not use panther disk utility as there is different thingy's they use and this does screw up a drive but nothing a erase/format can not fix.

Fonts not showing in InDesign CS6

Hi there,
I've seen a similar question to this before through a Google search and I tried the advice listed such as placing the affected fonts in: C:\Program Files(x86)\Adobe\InDesign CS6\Fonts; as well as searching for fonts with a **after its name. Doesn't work. The files originated in CS5 and pops up saying there are two missing links (fonts) which are Avenir Book and Avenir Black. I've done the "Find Font" and the only one that shows is Avenir Book. Avenir Black isn't even there, even after re-installing and relocating to the new folder. Secondly, even after I save the file after "finding" Avenir Book, upon re-opening it still says it's missing. Is there anything else I can try-short of uninstalling InDesign CS6 (I still have CS5 installed)? Also, I'm not that familiar with InDesign, it isn't a program I use much.
Thanks!

Is this the same computer where the files started out in CS5?
There are probably quite a few different cuts of Avenir (certainly over the years it has been available as TT and T1 in both Windows and Mac formats, and I have an OpenType version here from Linotype). Some possibilities for why CS6 might not see a font are that you have installed a different version, you have more than one version installed or it is installed in more than one location, or that it is looking at a different internal name in CS6. Typically, if the fonts are showing as missing, but are, in fact installed, using Find Font and substituting the same font will solve the problem.

Why are my black tints (eg. 10% black) not showing in Indesign?

A colleague of mine is running Indesign CS5 using MacOSX 10.6 but she cannot view any light black tints such as 10% black. These always appear as white on her screen. Everyone in our team EXCEPT her can see these tints on their monitors.
We've tried calibrating the monitor, switcing monitors and deleting/reseting Indesign preferences but to no avail.
Does anyone have any ideas why she cannot view these tints? Do we need to reinstall Indesign?
Would appreciate any help!

Hi Rob,
I think we've solved our problem, we tried placing the monitor cable into the second port on our NEC monitor and it has seemingly fixed the issue. All this time and it was a faulty port!
Thanks for your help anyway!

First not working, now not showing up

i bought and downloaded the update for my ipod when i bought it this summer, and bought some apps. they worked fine at first and then i don't know what happened but when i tried opening them the screen was black and then it went back to the home screen. so i restored it, my apps were gone and now when i download them again they won't show up on my ipod... does anyone know how to fix this?

hmm, bump...

HT4362 What if Apple TV can't find your pictures to share? Use to, but now not showing?

Can't get Apple TV to "find" my Iphoto's? It used to, but now it's not listed.

Was having the same trouble this morning. I had to have computer open w/ iTunes open at the same time.
Try that

CS3 Indesign 5.0.2 - futura OTF now not showing in Indesign, does in Illustrator

Similar Messages

Maybe you are looking for