CS3 installation failure

I am reinstalling Adobe CS3 on my machine after a rebuild. Windows 7.
After I insert installation disk 3 and hit ok I receive an error "Adobe CS3 installation has stopped working" and the installation process closes.
Any thoughts as to how I may proceed?
Dani Amendola

you could try different installation files.
if you follow all 7 steps, you can dl a trial via one of the links on this page: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
and activate with your serial number.
if you have a dl problem, you didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem.

Similar Messages

CS3 installation frustrations

This is frustrating.
I have Vista home premium 64bit.
I've had my CS3 design premium installed on this computer before, so I'm not sure what is different other than I just sent it back to the manufacturer to have the HD replaced.
I've done the jscript and vbscript, ran the installer as admin, after a 2 hour installation process, the only thing that gets installed is Acrobat and the flash encoder, neither of which work properly.
The rest is all failed components.
I have about 30+ hours into this.
Any other ideas?

I Just battled my CS3 installation on XP sp3 for weeks... but, alas, there is hope! I was logging on to call Adobe out on their HORRIBLE installer. Oh, if you contact them, they do not support CS3 anymore.   HA. They tell you that your PC may have a problem, or your disc... NOT THE PROBLEM. Okay, I guess I'll save the ranting for my own post (and a little at the end), but hopefully my advice will be some help for you.
After trying almost every suggestion I could find on here, some blessed soul offered this gem.   Install the products one by one... I know, and it will take 40-60 min per product, and it will always "repair" shared components (which after a while will be verify components), but everything installed for me except the auxiliary content for After Effects (3rd Party did install).   It was sketchy at first, but then started with Version Cue, and everything else fell in place. If you do happen to fail when installing a component, be sure to reinstall one that worked so the failure isn't the last attempt. Otherwise, at least for me, the products will not work due to some licensing failure.
Ok, so here's how you do it... Close the default window that pops up when you insert disc 1. . Then go to start, run, browse to the CS3 folder from the root of your DVD drive, then choose Setup.exe. It will go thru the prompt for serial number the first time, but after that it will allow you to choose which products to install without that prompt again. Click "deselect all" then choose one from the top pane. It worked, without copying all your files to the hard drive (HUGE waste of time), and without trudging thru the installer logs... For me this is the only thing that worked.
My original symptom was that the installer would hang or fail gracefully. I did not get any BSOD errors. Just failure. Oh yeah, they know about the problem. Doesn't matter that you spent 3K on their product (which I did download at time of purchase with DVD option) 3-4 years ago. If you want to re-install your product on the original PC, tough titty.   Buy the upgrade. Oh, you want replacement discs? Sorry... you must upgrade. AND ITS NOT THE DISCS YOU LIARS. Even though you and I and THOUSANDS OF OTHER HONEST PEOPLE bought their product with an understanding that it would be usable 3 years later. NOPE. Not supported. Not their problem. It’s your hardware or your DVD drive, or else you must have scratched your discs. PFFF, what a huge load of crap.
I'll leave you with this. Whoever is in charge of customer support at Adobe should be fired. I pray an innovative competitor comes along and pushes them out of the business. I hear that HTML 5 is going to make Flash obsolete... That's a start. Screw Adobe and their third-world support approach and their lack of regard for paying customers. They're despicable

AE 7 Pro Installation Failure

In attempting to port AE 7 Pro to new (replacement) system, the installation fails with a Microsoft C++ runtime error, right after selecting English as the language.
Computer is new Dell Precision, running WinXP SP2.
Any thoughts, suggestions?

Thanks for the quick reply.
When I installed AE 7 on my old machine some three years ago, I recall needing .NET Framework 2, so I made sure to put it on this machine. No change in the installation failure.
Other applications in the Adobe family and others came back just fine: Photoshop and Illustrator CS, Audition 3, etc. So I'm guessing it's likely not an inability to read and write in the drive system. Display adapter is NVIDIA Quadro FX 570 -- seemingly working correctly, as far as basic business and still apps go.
But now that you mention it, this new machine has a Quad Core CPU. Maybe AE 7 doesn't understand that?
Time to push the budget a bit, a move up the scheduled upgrade to CS3, perhaps?

Cannot install Adobe CS3, Installer fails

Hi, everybody,
I hope somebody can help me here, as for almost 3 weeks now I am trying to install Adobe's CS3 Design Premium and I can't get it to work. Adobe's tech support is very friendly and comes with solutions and things to try now and then but first response time is really slow (48h) and secondly they haven't found a solution yet, though being escalated up in Tech Support levels already.
Problem:
Can't install CS3 (English version), Design Premium
Platform:
WinXP Professional SP2 2002 (all patches) US
Intel Pentium M 1.7 GHz
1.5 GB RAM
C:, D: Partition
On C: still 25 GB available
Computer is in domain.
Have tried to install it as local Admin and Domain-User (who is also in local Admin group with all rights).
Furthermore CS2 is installed, Macromedia, Office products etc.
Details:
1. Can start installer, all screens are accessible, can make entries everywhere.
2. Installation starts and progress bar appears.
3. Installers runs to the end (without any problem), summary screen comes.
4. Summary says that some products could not be installed.
5. Installer installed the "smaller" apps, like Acrobat, Device Central, Bridge etc. BUT NOT Flash, Photoshop, Illustrator etc.
Side effect is that, as Acrobat and Distiller cannot be activated by itself, I cannot use them anymore and the CS3 installer does remove these two CS2 products. Well, working with Reader currently :-(
Also, the numerous uninstallations (45 min!) remove also PDF plug-ins and Flash plug-ins, so a terrible situation to be in.
What I have tried so far (and which hasn't worked):
1. Ran CHKDSK over the hard disks, no issues.
2. Installed from hard disk (instead DVD).
3. Disabled all services and startups, as well as firewalls, virus scanners etc.
4. Let the cs3clean script run (provided by Adobe, which resolves problems if you had CS3 beta installed, which I didn't), with level 1 and 2.
5. Tried to install only specific applications (not all).
6. Ran MSCLeanup app.
7. Analyzed CS3 Install log for FAILED, Error Code 3 etc., no dramatic entries. Only thing that sometimes appears:
- Error 1303, not enough privileges for CONFIG.MSI, which seems to be a known MS issue when the hard disk responds too late. Of course privileges for CONFIG.MSI are there, also tried reapplying them, deleting folder etc.
8. Applied privileges new to all folders.
9. Ran a registry cleaner
10. Deinstalled Bridge 1.0
11. Tried it in Safe Mode, not possible (Installer says cannot be run in sfae mode).
More:
Adobe tech support also suggested to uninstall Bonjour, but I cannot find any entry and therefore have no idea how to uninstall. Add/Remove programs doesn't list it.
As the Installer runs about one hour, it is not only time-consuming, it also kills my productivity, as no Browser, Adobe or MS product can run when the installer is running.
Googled for error 1303 and CONFIG.MSI similar problems. Found numerous entries with CS3 installation issues, with some the CS3 Beta clean script helped, others had success with copying installation folder to hard disk, everybody something else (or no solution). And nothing that helped me.
As I know haven't heard from Adobe Tech Support for four working days, does anybody have any idea what else I could try?
Thanks
Matthias

There are log files that record the process of installation. If errors occur, they will be recorded in those log-files.
You should open up the log file in C:\Program Files\Common Files\Adobe\Installers. The file is called something like Adobe Creative Suite 3 Design Premium 1.0.log.gz (depending on your install type).
Pay attention to the file extension: it should be .log.gz and not just .log
To open it you should have a program like Winzip or Winrar, because it's an archive file containing a text file.
Search in the text file for the error message. Search for "Error ".
In my case it was "Error 1401.Could not create key \Software\Classes\.svg\OpenWithList\Illustrator.exe. Verify that you have sufficient access to that key, or contact your support personnel."
Now follow these steps:
1. Make sure you are logged in as an Administrator in Windows XP.
2. On the Windows TaskBar, choose Start, Run, type "regedit" (without quotes), and click OK.
3. Navigate to the following key that was of your error message (in my case it is: HKEY_LOCAL_MACHINE\Software\Classes\.svg\OpenWithList)
4. Right-click "OpenWithList" and choose Permissions.
5. Make sure your user name displays under "Group or user names."
NOTE: In the Windows XP Pro edition, the user name displays next to the word, Administrators.
In the Windows XP Home edition. the user name may display without the word, Administrator.
If you are not sure whether or not you are logged in as an Administrator, you can verify user rights in the Control Panel, User Accounts.
6. Verify that "System" also displays under "Group and User Names."
If the System name is not there, add it as follows:
7. In the Permissions for OpenWithList dialog box, click Add.
8. Type "System" (without quotes) in "Enter the object names to select" and click OK.
9. In "Permissions for System," make sure "Full control" and "Read" are set to "Allow."
10. Click OK, exit the Registry, and proceed with the install.
Read the tech note as well: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402035&sliceId=1
My problem was solved this way. Good luck!

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Windows 8 installation failure with German language pack

Hi,
I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
Thanks in advance for your Support,
Ingo
Event-Details:
System
Provider
[ Name]
Microsoft-Windows-WindowsUpdateClient
[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}
EventID
20
Version
1
Level
2
Task
1
Opcode
13
Keywords
0x8000000000000028
TimeCreated
[ SystemTime]
2012-12-28T10:06:26.588367000Z
EventRecordID
2032
Correlation
Execution
[ ProcessID]
388
[ ThreadID]
2640
Channel
System
Computer
Lenovo-PC
Security
[ UserID]
S-1-5-18
EventData
errorCode
0x80070002
updateTitle
German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
updateGuid
{B9991A98-7903-4A91-B17A-818B1C1D9633}
updateRevisionNumber
200
serviceGuid
{9482F4B4-E343-43B6-B170-9A65BC822C77}

Hi SOL
For more information , please find the below download link.
http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
Thank you
please rate all useful information

Adobe Camera Raw 6.7 Installation Failure

From Adobe Bridge CS5, I enter Help, then Updates.
Adobe Application Manager informs me that I can update Adobe Camera Raw to 6.7.
I click to install, the software is downloaded tha I get an Installation Failure message.
When I click on 'Customer Support' on the screen, I am directed to 'http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html'.
At no point during the installation was I asked for the serial number.
Regards
Mike

Please confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]

Acrobat X pro installation failure

I always have had problem with Acrobat installation.
Last time it make me completely reinstalled Windows before I can successfully installed Acrobat. However, recently my Win 8.1 pro has had problem so I decided to reinstall Windows from scratch. Again, I encountered Acrobat installation failure.
Here are the error messages:
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Infact, the Creative Suite is the very few first applications I installed after Windows set up.
Any clues on why this happens. I'm tired of reinstalling Windows again and again. But Acrobat is important for me.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Itune installation failure

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"

I went a step further than before and got itunes running again.
The Updater had also installed Quicktime.
I launched quicktime, it appeared to be configuring and then launched. Then when I run Itunes now it is working...
Hope this is your problem also.

Adobe Player for Embedding installation failure

Multiple tries but only failure - have tried both the automatic update and also the standalone installer. Zero sucess. Since I have CS5 Master Collection hate to wate the better part of the day doing a clean re-install. Here is my most recent update log file.
Any suggestions on what I should try are welcome!
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 3.0.122.0
Win OS version: 6.1.0.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 185.497 miliseconds (0.185497 seconds) DTR = 21.5637 KBPS (0.0210583 MBPS)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup
Updating media info for: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,3.0.122.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[    4956] Sun Nov 14 07:48:25 2010 INFO
______ Verify Dependency Subscribers ______
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is: false
Action string for {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Common Files\Adobe\APE\3.1
[    4956] Sun Nov 14 07:48:26 2010 INFO
Payloads passed preflight validation.
Call PreSession Custom Hook
Calling the custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
::START TIMER:: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}]
[    5276] Sun Nov 14 07:48:26 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Command ARKPatchCommand failed.
[    5276] Sun Nov 14 07:48:26 2010 INFO
Completing installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Error rolling back command ARKPatchCommand
[    4956] Sun Nov 14 07:48:27 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}] took 1024.22 miliseconds (1.02422 seconds) DTR = 3.90539 KBPS (0.00381386 MBPS)
User specified overrideFile:
Calling the ROLLBACK custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul
No operation. We're done:
Updating driver data - Action: Remove driver entry
Updating driver data successful. Driver entry was removed. ARP estimated size 0KB
[    4956] Sun Nov 14 07:48:29 2010 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[    4956] Sun Nov 14 07:48:29 2010 ERROR
The following payload errors were found during install:
- Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
[    4956] Sun Nov 14 07:48:29 2010 INFO
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 7290.45 miliseconds (7.29045 seconds) DTR = 144.298 KBPS (0.140916 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
ERROR: 6 Command ARKPatchCommand failed.
ERROR: 6 Error rolling back command ARKPatchCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
Search the same string above to find when the error occured.
Exit Code: 7 - Unable to complete Silent workflow
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

As an update to my previous post about the installation failure. I chatted with Adobe Customer Service but they were unable to help and told me to call tech support - last time I did that I was unable to resolve the problem after spending about 2 hours on the phone and they are only open during the week.
I solved the problem by:
1) Deactiviating CS5 Master Collection on my computer
2) Uninstalling the software from the control panel (I did not remove the serial number as I was planning on re-installing.
3) Downloading and running the Adobe CS5 Cleanup tool.
4) Reinstalling CS5 MC.
5) Downloading and installing all of the updates to bring the install up to date.
I am glad it is working as it should but really had better things to do with the 4-5 hours this took to do. Would be nice to have a tool to fix these types of problem without having to go thru the above especially considering the price the software costs...

Installation Error DW050: Adobe Illustrator CS5.1: failed due to language pack installation failure

I recently got a macbook Air and needed to reinstall my adobe creative suite to said new computer. I purchased creative suite online so I downloaded it from there and followed the installation instructions to a T.
I originally purchased Adobe Creative Suite in 2011 so it is version CS5.1
Everything installed successfully except Adobe Illustrator, which at the end left me this error message
ERROR: DW050: - Adobe Illustrator CS5.1_AdobeIllustrator15_1en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
how can I get illustrator on my computer?!
Hoping to sell my previous computer soon and I'm almost done transferring programs and photographs.
Thanks so much!

Which language is the application?
Which language is your system?
Which system?

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

CS6 Installation Failure - Adobe Genuine Software Verification Error

I am trying to install CS6 as a trial version on my Windows8 laptop but keep being told that my software is counterfeit (" Installation Failure - Adobe Genuine Software Verification Error").
I have uninstalled and re-downloaded it with no success, and the only forum post i can see on this suggests checking the date/time on the PC are correct (which they are).
Any further ideas?
Many thanks

Thanks very much for replying Mylenium - i found this before but it only contains a link to photoshopCC rather than CS6 unless I have missed it??. I have bought a licence for the student/teacher edition of CS6 (which I am still waiting for) so presume that downloading photoshop CC wont work.
I have also tried the 'troubleshoot' link provided but couldnt find anything specific to this error.
Has anyone successfully resolved this problem for CS6?
Cheers

Cannot install Photoshop CS3 - Installer just dissappeared

I have an issue installing Photoshop CS3 as follow:
I have removed all Photoshop CS3 Beta manually (Use control panel, deleted files and registries) as instructed in this web and get rid of all thing involved Adobe out of my computer.
When I clicked Setup.exe, a setup windows with progressive bar (See in http://www.thetaforce.com/image/cs3installer.jpg ) appeared shortly and then disappear!
Then nothing is happenned further. No error message. It just disappeared. I wait for an hour but nothing happened.
I tried to run Windows in clean mode (msconfig -> disable unneccessary services) and also disable Antivirus and Firewall etc. But this problem persists.
I'm running Windows Vista Home Premium (32Bit) and have Intel Centrino Duo 2.0GHz with 1.5GB of Ram (DDR2) and 100GB HDD. Graphic shared Intel 945GM Express Chipset.

I finally got CS3 to install last night, I decided to vanilla install XP sp2 from scratch using a ghost copy.
I then ran the installer from the same physical disk but diffrent partition and I got 2 errors, CS3 and shared components failed to install. I was just about to throw the towel in, having cleanned my pc back to nothing but base XP sp2 install and then I thought why not put the whole 460mb package on the root or C:.
I ran the installer and uncompressed the file, which created the installer and executed. The options screen popup (at last!!) and I chose the default install location and few minutes later, CS3 was installed and running.
I then spent the next couple of hours updating XP with 80+ security patches, IE7 and all my other applications.
This may seem a bit drastic, but I can only conclude that this problem had nothing to do with CS3beta but rather a conflict with one or some XP security updates / patches.
Also, there must be something inherently wrong with the CS3 installer scripts, perhaps absolute rather dynamic file addressing as it just would not work if I put the installer on a different drive.
I've burnt nigh on 20 hours on this upgrade and finally have it running.
Focusing on the positives, my pc is running a lot quicker and has less bloatware than before, however getting a PC to be stable takes a lot of time and effort, which I now have to contend with. In fact, IE 7 is already crashing more than it did previsouly!
Looking on the bright side, I finally have access to my CS3beta PSDs with LR working in harmony.
I do hope others can solve the problem in a less drastic manner. For me, I felt it better to work from a know XP build to isolate the many variables.

CS3 installation failure

Similar Messages

Maybe you are looking for