CS3 Installation, wrong language

Hello,
we installed CS3 (german) on a client PC (XP Prof, SP3) under the administrator account. If InDesign is started using other accounts the language is english. What goes wrong here? And how to fix it?
kind regards

I did, but is was no help, because the program started in English in spite of this. After this i tried to copy the correct (german) settings from the administrator account to the users branch, but this didn't work either. By the way: the user account has the same rights on the local machine as the administrator does...

Similar Messages

New installation : wrong language

Hi Sapers,
I have installed E-Sourcing 5.0.
When I start http://<hostname>:<port>/sourcing/fsbuyer/portal/login, the welcome page is not in english, but in dutch !
I have installed dutch and french language, english is installed by default.
How can I have my welcome page ( and the rest) in english.
Thanks in advance,
Eric.

Eric,
I forgot to mention, the option to change languages on the logon screen only applies to the logon screen itself.
After you have successfully logged into the system, you will have to navigate to your user account (use the hyperlink in the upper right hand corner that appears as your name) and change the language for your user account. This will change the language for all of the other system screens.
Best Regards, Scott

Impossible to uninstall v16. Automatically re-installs with wrong language (afrikaans) despite manual uninstall of rem Moreover keeps freezing windows explorer.

I Downloaded and installed v17 beta on my desktop (W7/64). OK
I noticed later that the version had changed without doing anything (moved back to v16.0.2, and displayed in Afrikaans).
Note that a second drawer is installed under Program files X86 (Mozilla maintenance service)
I uninstalled both drawers (Firefox & mozilla maintenance service) several times through windows control panel.
Every times remain some leftovers (e.g desktop icon, and the drawers listed above , but they are generally empty)
I tried cleaning registry afterwards (Tuneup utilities, Ccleaner) and even reboot the machine)
And it's always the same story: Firefox icon re-appears on my desktop, and can be normally opened . The software is always displayed in afrikaan language .
Moreover, I noticed (when I try to open the drawer (program files X86) that windows explorer freezes.
I had same problems on 2 windows 7 partitions, same computer. But never under windows 8
I really could do with a bit of help. It looks as though this piece of software is corrupt, and I really don't understand how it can manage to reappear a couple of minutes after being uninstalled .
Otherwise it's not a genuine Firefox version ?
Best regards
Philippe cante
I made screenshots of unistall/cleaning/opening process if that's of any interest to you But I can't attach a file!

The maintenance service runs as a background Window service if necessary and is responsible for downloading and applying an update for all installed Firefox versions without the need to respond to an UAC confirmation that comes with a dimmed window. You only need to give permission once when you install Firefox and the maintenance service isn't installed yet.
If the Firefox user interface (menu bar) is in the wrong language or if you want to change the current language then you can get Firefox in the language of your choice here:
*Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html

Wrong language in menu Acrobar Reader X

Wrong language used for show menus and etc.
Acrobat Reader 10.1.1. Downloaded by country language (russian). Installation used russian language. In administrator account all menus in russian language, but in users accounts menu in english. In user preference selected "russian". Try to delete registry key "HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\10.0" and copy it from administrator profile - not help.
Any idea?

There may be an easier way, but if I were you, I would try the following.
Remove all traces of Reader (not only the program) from your system using the Windows Installer Cleanup Utility. This is no longer supported by Microsoft because it can produce problems with Win 7, but you can still download it from from places like
http://majorgeeks.com/download.php?det=4459
Then, download the Reader installer from
http://get.adobe.com/reader/enterprise/
and perform a clean install.

Cannot install Photoshop CS3 - Installer just dissappeared

I have an issue installing Photoshop CS3 as follow:
I have removed all Photoshop CS3 Beta manually (Use control panel, deleted files and registries) as instructed in this web and get rid of all thing involved Adobe out of my computer.
When I clicked Setup.exe, a setup windows with progressive bar (See in http://www.thetaforce.com/image/cs3installer.jpg ) appeared shortly and then disappear!
Then nothing is happenned further. No error message. It just disappeared. I wait for an hour but nothing happened.
I tried to run Windows in clean mode (msconfig -> disable unneccessary services) and also disable Antivirus and Firewall etc. But this problem persists.
I'm running Windows Vista Home Premium (32Bit) and have Intel Centrino Duo 2.0GHz with 1.5GB of Ram (DDR2) and 100GB HDD. Graphic shared Intel 945GM Express Chipset.

I finally got CS3 to install last night, I decided to vanilla install XP sp2 from scratch using a ghost copy.
I then ran the installer from the same physical disk but diffrent partition and I got 2 errors, CS3 and shared components failed to install. I was just about to throw the towel in, having cleanned my pc back to nothing but base XP sp2 install and then I thought why not put the whole 460mb package on the root or C:.
I ran the installer and uncompressed the file, which created the installer and executed. The options screen popup (at last!!) and I chose the default install location and few minutes later, CS3 was installed and running.
I then spent the next couple of hours updating XP with 80+ security patches, IE7 and all my other applications.
This may seem a bit drastic, but I can only conclude that this problem had nothing to do with CS3beta but rather a conflict with one or some XP security updates / patches.
Also, there must be something inherently wrong with the CS3 installer scripts, perhaps absolute rather dynamic file addressing as it just would not work if I put the installer on a different drive.
I've burnt nigh on 20 hours on this upgrade and finally have it running.
Focusing on the positives, my pc is running a lot quicker and has less bloatware than before, however getting a PC to be stable takes a lot of time and effort, which I now have to contend with. In fact, IE 7 is already crashing more than it did previsouly!
Looking on the bright side, I finally have access to my CS3beta PSDs with LR working in harmony.
I do hope others can solve the problem in a less drastic manner. For me, I felt it better to work from a know XP build to isolate the many variables.

I accidently bought a book in the wrong language, swedish, I dont speak swedish. How can I change it to English?

I accidently bought a book in the wrong language, swedish, I dont speak swedish. How can I change it to English?

Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book, click the arrow to the left of it, click the 'Report a Problem' button :
and then the 'Report a Problem' link on its line :
and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes, which it is currently doing for me) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption.

I am using the wrong language to access a secure website. How can I change it to English?

I am trying to access my university account from a computer in Germany and while I can access some features, such as e-mail, it is not allowing me access to my secure faculty account. The message I am getting is that I am using the wrong language, i.e. German, to access my account. How can I change the language to English, since the computer automatically uses German.

Put the link of the website into Google translate at [http://translate.google.com/#de|en|], then click the translate button. You will then get a link on the right hand side of the page which will take you to a translated version of the page.

ITunes match matched songs to wrong language

iTunes match has matched some of my Indian songs to wrong language. Many of the big budget movies these days are releasing their movies in several languages at the same time and making them all available to purchase from iTunes store. When I ripped a CD I already had, iTunes matched some of them into a wrong language. Name of the song is still showing original, but the actual track is in wrong language.
Is there any way I can force iTunes to re-match?

Songs that are ineligible because they are too low of a bit rate can be converted to a higher bit rate by right-clicking and creating either an AAC or MP3 version. Mind you, the quality will NOT improve; in fact it could degrade a little, but the songs will indeed be re-encoded at a higher bit rate. Once iTunes recognizes that they are encoded at a high enough bit rate, they will no longer be ineligible. And they greatest part is, if they are matched by iTunes, then not only will you have them in the iCloud, but you will be able to delete the original song files (do not select the option to delete them from iCloud) and re-download the matched songs from iTunes in far greater quality.

Cannot install Adobe CS3, Installer fails

Hi, everybody,
I hope somebody can help me here, as for almost 3 weeks now I am trying to install Adobe's CS3 Design Premium and I can't get it to work. Adobe's tech support is very friendly and comes with solutions and things to try now and then but first response time is really slow (48h) and secondly they haven't found a solution yet, though being escalated up in Tech Support levels already.
Problem:
Can't install CS3 (English version), Design Premium
Platform:
WinXP Professional SP2 2002 (all patches) US
Intel Pentium M 1.7 GHz
1.5 GB RAM
C:, D: Partition
On C: still 25 GB available
Computer is in domain.
Have tried to install it as local Admin and Domain-User (who is also in local Admin group with all rights).
Furthermore CS2 is installed, Macromedia, Office products etc.
Details:
1. Can start installer, all screens are accessible, can make entries everywhere.
2. Installation starts and progress bar appears.
3. Installers runs to the end (without any problem), summary screen comes.
4. Summary says that some products could not be installed.
5. Installer installed the "smaller" apps, like Acrobat, Device Central, Bridge etc. BUT NOT Flash, Photoshop, Illustrator etc.
Side effect is that, as Acrobat and Distiller cannot be activated by itself, I cannot use them anymore and the CS3 installer does remove these two CS2 products. Well, working with Reader currently :-(
Also, the numerous uninstallations (45 min!) remove also PDF plug-ins and Flash plug-ins, so a terrible situation to be in.
What I have tried so far (and which hasn't worked):
1. Ran CHKDSK over the hard disks, no issues.
2. Installed from hard disk (instead DVD).
3. Disabled all services and startups, as well as firewalls, virus scanners etc.
4. Let the cs3clean script run (provided by Adobe, which resolves problems if you had CS3 beta installed, which I didn't), with level 1 and 2.
5. Tried to install only specific applications (not all).
6. Ran MSCLeanup app.
7. Analyzed CS3 Install log for FAILED, Error Code 3 etc., no dramatic entries. Only thing that sometimes appears:
- Error 1303, not enough privileges for CONFIG.MSI, which seems to be a known MS issue when the hard disk responds too late. Of course privileges for CONFIG.MSI are there, also tried reapplying them, deleting folder etc.
8. Applied privileges new to all folders.
9. Ran a registry cleaner
10. Deinstalled Bridge 1.0
11. Tried it in Safe Mode, not possible (Installer says cannot be run in sfae mode).
More:
Adobe tech support also suggested to uninstall Bonjour, but I cannot find any entry and therefore have no idea how to uninstall. Add/Remove programs doesn't list it.
As the Installer runs about one hour, it is not only time-consuming, it also kills my productivity, as no Browser, Adobe or MS product can run when the installer is running.
Googled for error 1303 and CONFIG.MSI similar problems. Found numerous entries with CS3 installation issues, with some the CS3 Beta clean script helped, others had success with copying installation folder to hard disk, everybody something else (or no solution). And nothing that helped me.
As I know haven't heard from Adobe Tech Support for four working days, does anybody have any idea what else I could try?
Thanks
Matthias

There are log files that record the process of installation. If errors occur, they will be recorded in those log-files.
You should open up the log file in C:\Program Files\Common Files\Adobe\Installers. The file is called something like Adobe Creative Suite 3 Design Premium 1.0.log.gz (depending on your install type).
Pay attention to the file extension: it should be .log.gz and not just .log
To open it you should have a program like Winzip or Winrar, because it's an archive file containing a text file.
Search in the text file for the error message. Search for "Error ".
In my case it was "Error 1401.Could not create key \Software\Classes\.svg\OpenWithList\Illustrator.exe. Verify that you have sufficient access to that key, or contact your support personnel."
Now follow these steps:
1. Make sure you are logged in as an Administrator in Windows XP.
2. On the Windows TaskBar, choose Start, Run, type "regedit" (without quotes), and click OK.
3. Navigate to the following key that was of your error message (in my case it is: HKEY_LOCAL_MACHINE\Software\Classes\.svg\OpenWithList)
4. Right-click "OpenWithList" and choose Permissions.
5. Make sure your user name displays under "Group or user names."
NOTE: In the Windows XP Pro edition, the user name displays next to the word, Administrators.
In the Windows XP Home edition. the user name may display without the word, Administrator.
If you are not sure whether or not you are logged in as an Administrator, you can verify user rights in the Control Panel, User Accounts.
6. Verify that "System" also displays under "Group and User Names."
If the System name is not there, add it as follows:
7. In the Permissions for OpenWithList dialog box, click Add.
8. Type "System" (without quotes) in "Enter the object names to select" and click OK.
9. In "Permissions for System," make sure "Full control" and "Read" are set to "Allow."
10. Click OK, exit the Registry, and proceed with the install.
Read the tech note as well: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402035&sliceId=1
My problem was solved this way. Good luck!

Wrong language selection

Hi, I have a hp laserjet MFP M476nw and I choosed wrong language, when I started to install the printer, and of all languages it was chineese and thats not so easy to understand . Can somebody help me, please? Maybe someway to restart...

Hi historyan,
Without having the printer in front of me, I can try to help based off of what I see in the user guide.
1. Touch the Setup button (the button with the wrench).
2. Use the Right arrow to scroll to System Setup (it should be pressed 4 times, though I'm not certain. Google Translate says that System Setup looks like 系统设置 Xìtǒng shèzhì in simplified Chinese, I don't know how accurate that is but it's worth a shot).
3. The first menu item should be Language, touch that.
4. Scroll until you recognize something that looks like this: 英語 Yīng yǔ (Google Translate says it should be English).
If that doesn't work, but you're able to get to the lanuauges menu, just try different languauges until you can find the right one.
Let me know how this goes!
Thanks,
Mike
I work on behalf of HP
**Click the KUDOS thumbs up button to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Some of my apps are with wrong language.

Some of my apps are with wrong language. Spotify is on holland and sleep cycle are on Chinese? Is there a way to change this ?
My region is set right (Norwegian)

Henrik,
You should try setting your general system language to English, followed by setting it to Dutch again. Fixed it for me. Apps that don't have a translation to Dutch (at least that's what i'm guessing) now appear in English (which I think is fine). So before this 'fix' the phone must have somehow thought Chinese was my second language...
https://discussions.apple.com/message/23148896#23148896
Regards,
Johan

Why is the wrong language appearing in various iCloud communications?

I get emails from iTunes, first welcoming me to iTunes and more annoyingly the notification of a shared photostream are in the wrong language. It's not a big deal with a regular emails, I can ignore them. But the notification of the shared photossteam from the iPad is not good. My friend replied he didn't understand Korean. :-)
This has been ongoing and few people have complained, I found it amusing until I tried to share a Photo Stream.
I checked all of my devices, everything is set to the US. The address and credit card is a US address. I signed out of everything, I really mean every instance of my Apple ID on every device was signed out. I powered all of them off and signed back in to just the iPad sent an invitation to myself and what resulted was the screen shot I attached.
Now, if there are no suggestions, (I'm doubt there will be), how do I inform Apple of this problem?
Thanks,
RS

Check out my post tonight as I think I have worked it out and it is a weird one:
https://discussions.apple.com/message/19773944#19773944
Hope this resolves your problem.

Opening templates, wrong language - need english

I am opening templates in iAuthor and am getting the wrong language.
I need english.
Anyone have a tip of what I need to do in order to fix this?
My lion OS is set with English as default.
thanks in advance,
Linda

Good to know nothing broken, but seems it could be a nice way to have template and then some tips on how to use the feature.
Some seem very easy to use and others not so. Like 3D and views.
Just played with Views more and ignored the text, so think I got it.
Seems to have lots of features, but many are from other products so seems like once you find out iAuthor can do the feature it is easy to implement.
I'm currently just playing around with all the features and creating test pages.
Very cool concept.
Thanks for your reply and helping.
Thanks,
Linda

Wrong language when choosing a preferred language which is not the main UI language in some iOS8 apps (including App Store)

I've chosen Galician as my preferred language in iOS8. Since the iPhone is not translated to Galician, only the apps which are translated into Galician show up in that language, but the UI shows in Spanish (the second preferred language). Or should it be like that, because some apps (Twitter, Telegram, even the App Store) which have an Spanish translation show up in English. The App Store is even buggier because its fine on my iPad and it used to be OK on my iPhone with these settings, but suddenly it switched to English only in the iPhone. No matter how many times I force quit or reboot the iPhone, wrong language is displayed in some apps.

I think correct behavior is for apps to use the 2nd language on the list, if they do not have the first but do have the 2nd. I don't know why some app would do otherwise.

Wrong language on new ipod touch

I ordered my new 32GB iPod Touch direct from Apple about 4 days ago. It arrived today. I have two problems. 1- it is currently displaying everything in the wrong language and I can't find anything in the online manual on how to change it. 2- when I type in the serial number on Apples support site, it says it's incorrect. I own many Apple product and have never had this much trouble. What a disappointment.
Any thoughts or suggestions

To change language go to Settings>General>International>Language. I would call AppleCare about eh number problem.

CS3 Installation, wrong language

Similar Messages

Maybe you are looking for