CS3 is acting very buggy after installing my new monitor.

Hello,
I have been using CS3 since it was released on my powerbook with an old generation 20" lcd apple display. A buddy just gave me a samsung 244t lcd and now bridge doesn't show any previews or toggled changes unless I drag the bridge window out and back into view. I.E.: in the folders panel. If i toggle open any drive or folder nothing happens unless the window is dragged out of frame or minimized and brought back to normal view.
I have reinstall cs3 , purged cache ...... ANY THOUGHTS????
SYSTEM : 1.5 ghz powerbook with 2 gigs ram.
thanks

If you have that external Samsung LCD monitor connected through the digital video output of the MacBook, disconnect it from there and hook it up to the ANALOG output of the MacBook through the monitor's analog output.
You will need to buy a different adapter and cable if you don't have it, but it's the only way. I went through months of aggravation trying to solve a problem with my wife's MacBook, and that's how I finally fixed it.

Similar Messages

  • My macbook pro is very slow after instal OSX

    My macbook pro is very slow after instal OSX

    Fixing a Mavericks Installation Problem
    How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
    Try these in order:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • My macbook pro is very slow after installing mountain lion

    my macbook pro is very slow after installing mountain lion?  Is anyone else having this issue?

    If you don't use an SSD and bump your RAM up to 8 Gb's you may experience slow speeds, but I noticed slow speeds with your general configuration in SL.
    one thing you should consider right now is, Spotlight is Reindexing your hard drive, that takes time and resources, (resources which you don't necessarily have to spare).
    If you continue feeling like your performance is slow, you have a few options with this computer (I have the same one).
    the express card slot can house a wintec SSD drive. That little door on the side of your machine is pure gold for a really quick solution for speeding up your machine. I have one in mine right now i'm using as a scratch disk for CS6 but I used to boot from it, and the speed boost was out of this world.
    You could take out the internal HDD and put in a new SSD (I have a Vertex 4 from OCZ) it is completely over kill but my experience is pretty fast and I keep up with the later MBP models colleagues have.
    There are some other options for you like taking out the optical drive (however I don't know if I'm supposed to talk about that here). Google Data Doubler.
    You need to also set it to always use the 9600 chipset, this will increase performance a lot too. to do this go to system preferences>energy saver>Better Performance. This switches the video card to the better one and makes a world of difference.
    Lastly, your RAM. after an EFI Firmware update, our computer support up to 8GBs of RAM. Do it!
    Late 08 MBP 2.53 GHZ 9600 chipset 8gb ram, Vertex 4 SSD

  • App store is very slow after installing io6 on my iphone 4S

    email and app store are very slow after installing ios 6 on my iphone 4S

    Perhaps these suggestions will help:
    http://www.apple.com/batteries/iphone.html
    also
    http://theweek.com/article/index/250098/ios-7-battery-life-6-simple-ways-to-keep -your-iphone-powered-up
    http://www.tuaw.com/2013/09/18/how-to-stop-ios-7-from-destroying-your-iphones-ba ttery-life/
    One final unconfirmed possibility:
    http://ipadnerds.com/fix-battery-drain-issue-ios-7/
    Regards.

  • My wifi is very slow after installing mountain lion on my Mac book pro

    My wifi is very very slow after installing mountain lion on my MacBook pro.
    What can I do?

    Ha  ha, I misread that as "My wife is very slow after installing mountain lion on my Mac book pro"
    BTW on my MBPro (late 2009 with max RAM) Mountain Lion runs very well with no slowing down.

  • HT6114 My Macbook is running very slowly after installating mavericks. Could anyone help?

    My Macbook is running very slowly after installating mavericks. Could anyone help?

    OS X Mavericks: If your Mac runs slowly?
    Spotlight indexing make computer run slowly after a fresh installation of OS X.
    http://support.apple.com/kb/PH13895
    Startup in Safe Mode
    http://support.apple.com/kb/PH14204
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Increase disk space.
    http://support.apple.com/kb/PH13806
    Run EtreCheck and remove MacKeeper, CleanMyMac Norton Security, other third party aps,etc
    if you have installed those applications.
       https://discussions.apple.com/docs/DOC-6173

  • Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down after install of new 2nd internal WD IDE 320 gig hard drive, OS 10.4.11, orig HD is WD 80, RAM = 2 gig.  Help!

    Jumpy mouse and shut-downs on G4 mirror door when putting to sleep or just random shut down, is now occuring after install of new 2nd internal WD IDE 320 GB hard drive, running OS 10.4.11, orig HD is WD 80 GB, RAM = 2 gig.  Help!

    Hi Ted,
    At this point I think you should get Applejack...
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    Ignore the MacKeeper ad no matter what else you decide.
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.

  • TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

    After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
    == This happened ==
    Every time Firefox opened
    == I installed a new version ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

    If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
    It is possible that some files got broken with the latest update.

  • After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
    From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
    I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
    I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

  • TS1398 I can no longer transfer  photos from i photo on my mac to my i pad via iCloud. According to i photo the photos are on i cloud. There is plenty of storage space  available. This happened after installing a new wi fi printer

    I can no longer transfer photos from my mac to my i pad via i cloud
    Accordong to i photo on my mac the photos are in i cloud
    There is plenty of storage available
    Don't know if it is just a coincidence, but problem arose after installing a new wi fi printer

    There are apps such as Simple Transfer which allow you to transfer photos to/from your iPad and your computer via your wifi network - they will copy into the Camera Roll album in the Photos app on your iPad

  • My telus email no longer works after installing the new os Yosemite

    my telus email no longer works after installing the new os Yosemite

    This is a problem between Telus and Yosemite.  Telus, of course, blames Apple. 
    Check the box that says "Allow insecure authentication"  That will get your email working.
    However, this box will get un-checked when you stop start Mac Mail.  The next time you start Mail, you'll have to re-check it for each Telus account.  (This is the bit that Apple needs to fix.) 

  • After installing a new hard drive can I install snow leopard directly from snow leopard disc

    After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

    You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
    (64305)

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

    After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery.  Any suggestions?

    Did you format the new HDD?  What is the status of the old HDD?
    Do you have an early or late 2011 MBP?
    Ciao.

Maybe you are looking for