CS3 Mac can't get ACR working since Sno Leopard

Since upgrading to Snow Leopard I had a range of problems.
I fixed them for a bit; re loading CS3, updating CS3, ACR etc
But then after I cropped  files I was getting error messages saying to install a printer (despite the Epson R288 working fine)
So I tried re loading (after deactivating) and now I am going in circles trying to find the right ACR and DNG reader working.
So; where are ACR updates for CS3 hid (CS4 is easy to find)
WHere does DNG converter reside
Thanks

Yeah I think I had gone down that path which when you select camera raw Macintosh and you end up with Ver 5.5 for ACR and ditto for DNG converter; but these turn out to be for CS4 if you go down on the download page and see the system requirements.
So I gave them another go, and found they don't work as it is the wrong PS version (CS3 not the CS4 these 5.5's are looking for)
So went and put the version 4.6 ACR for CS3 in and so far so good.
Thanks though, but Adobe have to confuse things by numbering ACR's in a cofused manner

Similar Messages

  • I have the Photoshop Photography Program and every time I try open Photoshop CC it asks me for a Serial Number. It keeps saying my trial period has ended. How can I get this working since Adobe doesn't issue Serial Numbers for CC.

    I have the Photoshop Photography Program and now every time I try open Photoshop CC it asks me for a Serial Number. It keeps saying my trial period has ended. How can I get this working since Adobe doesn't issue Serial Numbers for CC.

    Jodie84,
    I have just checked your account and found that you indeed have bought a Creative Cloud for Teams subscription but you have assigned the single seat to another user hence you ( If you are using your own Adobe ID ) are getting the trial error message.
    Two options : Either reassign the seat to your self or add an additional seat and invite your self in the same Team.
    Cheers,
    Kartikay Sharma

  • I have cs3 and can't get to work on 8.1 windows.  Can I download a trial of Fireworks and use my product key for full activation?

    I use only Photoshop and Fireworks from my CS3 cd.  It is not compatible with 8.1 windows.  Can I download a trial of Fireworks from the Adobe site and activate by using my product key from the original cd's?  I have looked for patches and to no avail.  Please help me with this as I need for making prints of my oil paintings.

    I rarely use Fireworks for printing, but rather to render or perfect my images.  I have used Fireworks for about 17 years and just feel comfortable with it.  I use Photoshop as well, and see the simularities.  I see the handwriting on the wall with Fireworks maybe going to greener pastures, but still feel comfortable with it.  I received my original Macromedia cd from my Son as a gift and another gift years later.  I am launching a new art form, "Conceptual Art" on my site, and require Fireworks.  Maybe its time to cross over to Photoshop, I'll see.  Thank you for your answer and your time. http://www.baywoodgallery.com/

  • WD elements formated on Mac - can I get it work on smart tv?

    Hi guys,  need your help please.  Formatted my WD on Mac, and downloaded some movies. I however when try to watch the movies, my smart tv can not detect any file in the device. Is this because the device is formatted from mac? Or the movie files format is *.mkv? thanksjo

    Hello and welcome to the WD community.
    In some cases Smart TVs do not see hard drives unless the drive is formatted in FAT32, However if the drive is visible on the TV, then make sure that the TV is able to play *.mkv files.

  • Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It te

    Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?

    The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
    (photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
    Did you ever have cs2 installed on this particular computer before?
    If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
    You'll need to use the non activation version of cs2 from here and the supplied serial number:
    Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products

  • I have the iphone 5 and it hasnt been a year yet and my lock button wont work. If  I take it to an apple store can I get it replaced since its still in the 1 year manufacture warranty?

    I have the iphone 5 and it hasnt been a year yet and my lock button wont work. If  I take it to an apple store can I get it replaced since its still in the 1 year manufacture warranty?

    Within the warranty period, unless the failure was caused by accidental damage it will be replaced for free. 

  • I have 2 itunes accounts - one work a/c and one home a/c, but when i sign in at home only my home songs appear even if I sign in my work a/c. I have authorised both computers to show both a/cs. How can I get my work a/c songs to appear at home?

    I have 2 itunes a/cs one at work and one at home. Both computers are authorised for the 2 a/cs, but I can;t get my work a/c songs to show on my home computer, even though I sign in my work a/c, and I can't get my home songs to show up on the  work computer even though I sign in my home a/c. V. frustrating!

    Hi,
    You will have to manually copy your music. Get a pen-drive big enough to accommodate all your music. And follow these steps:
    1. Create a new folder on the pen-drive.
    2. Copy the music from your work computer to the folder you just created. It's in (yourhomefolder)>Music>iTunes>iTunes Media>Music if you're using a Mac, or in C:\Users\(yourusername)\Music\iTunes\iTunes Media\Music if you're using Windows.
    3. Now on your home computer quit iTunes, and copy your music from work to the "Automatically Add to iTunes" folder in (yourhomefolder)>Music>iTunes>iTunes Media.
    4. Start iTunes. It will automatically start to process the files and move them to the appropriate place.
    Repeat these steps with your music from home on your work computer. Also I suggest to use only one iTunes account if possible.
    Hope it helps
    Regards,
    Gábor

  • In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?

    In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
    Thank you!

    When you erased the disk did you select Mac OS Extended Journaled as the format option?

  • My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

    My hard drive crashed on my Imac 24" 2009,  I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
    What external DVD can I get to work with the IMac?                              The Apple super drive is not compatible.

    Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

  • Can't get Mail working properly

    I just got my new MacPro this week, and it's really great except for I can't get Mail working right. I've set up my accounts and a few emails come through, though not many, and because it's been a week since I've been online, there should be many more than that. Also, I can't send any emails at all, no matter what I do. They will eventually go into my Sent box, but I've been sending them to myself to see if it's working, and they never come through. I spent an hour on the phone yesterday with the tech support for my ISP, and they told me that I'd have to talk to the Apple techs because they didn't have current info for *Mail 3.1*, the version I have, that the latest they had was for 2.something. So I called the Apple tech support and spent 2 hours on the phone with them, and they weren't able to help me get it going correctly either. It keeps giving me error messages such as Connection Failed, or Unable to Receive Mail, saying "there may be a problem with the mail server or network" and that "the connection to the server on ... port has timed out." I'm on DSL and am always online, so I know it's not the internet connection that's the problem. Can anybody give me some advice on what I should try? Any help will be gratefully appreciated!

    Is your ISP Verizon, Demon, or Glocalnet, then it might be Apples biggest Leopard Bug in conjunction with these ISP:s POP-servers.
    The one that randomly changes the settings in "advanced" from "password" to "APOP".
    The visual result of this bug is that you will get a popup-box where Mail asks you to enter your password. (Which is useless entering, since the preference settings are changed.)
    My advice counts only when you are supposed to use "password" as the correct setting in "Advanced" and in conjunction with some ISP:s.
    Michael

  • My itunes has stopped responding how can I get it working again

    My itunes has stopped responding how can I get it working again?

    I have a related issue (I think, hard to know for sure from the short frustrated post above).
    Since the last update of iTunes (11.0.5), it kind of freezes while checking for and downloading new podcasts. Processor load goes to 100% (sometimes above! figure from Swedish OSX "Aktivitetskontroll" which I can imagine is something like "Activity Control" or "Activity Manager" in English OSX) and stays there for a few minutes, 3-5 minutes is common. During that time the mouse pointer turns into a spinning ball when moved above iTunes. Other apps work ok meanwhile. (Four processors)
    Have a fixed connection to the internet, which I have tested while iTunes is frozen. We acheive above 100 Mbit/s downstream, 20 Mbit/s upstream, so the connection shouldn't be the problem.
    Any ideas on what to do?
    iTunes 11.0.5 (Swedish)
    MacOSX 10.8.4 (Swedish)
    iMac 27", late 2009 http://support.apple.com/kb/SP576

  • Can't get DRI working on new ATI driver

    Using the new ATI fglrx driver I'm experiencing the same corruption/watermark issues many people reported, and I read that enabling AIGLX fixes that.  Sure enough it did, but AIGLX shouldn't work without DRI.
    I've got the DRI module loaded, and the DRI section in my xorg.conf, but direct rendering isn't working so thusly I can't get compiz working.
    If I attempt glxinfo it tells me I have no protocol selected.
    Here is my /var/log/Xorg.0.log
    http://pastebin.com/m54192795
    I'm not sure what the problem is.  Thanks!

    enderandrew wrote:
    I can't turn on XGL, nor can I turn on AIGLX.
    I'm using KDE and Kwin.
    If I attempt glxinfo and glxgears to test that direct rendering is working, I get:
    "No protocol specified
    Error: unable to open display :0"
    I was earlier using this driver and AIGLX sucessfully with Sabayon and with Kubuntu.  We've been trying different distros for my wife's laptop, though at the moment we're pretty happy with Arch.  Note, I couldn't get the new ATI flgrx driver really to work at all with openSUSE on this laptop.  We'd consider using the open source radeon driver, but we have a Radeon Mobility 300 card in the laptop, and we couldn't get DRI to work on that radeon drivers, it says this particular chipset isn't supported.
    Compiz fails saying there is no display.  I'm at work, but when I get home in a few hours I can paste specific compiz errors, and the xorg.conf but Compiz isn't going to work until I can enable either AIGLX or XGL, and neither are going to work until direct rendering is working, which I suspect it isn't, since I can't run glxinfo.
    If you try to run glxinfo as root that is the error message you get but if you run as  user it works fine. At least on my box.

  • Can t get to work tint2 launcher

    I'm a beginner in arch linux and i'm trying to figure out why the laucher don't show up in my panel,
    i've set up the panel the way i want but i would like to have a few launcher
    I've try serveral thing but i can't get it to work,
    and chromium.desktop and gparted.desktop do exist in /usr/share/applications/
    tks
    Here my tint2rc
    # TINT2 CONFIG FILE
    # horizontal panel
    # squared taskbars
    # idirae config
    # Background definitions
    # ID 1
    rounded = 0
    border_width = 1
    background_color = #808080 20
    border_color = #ffffff 10
    # ID 2 - task active
    rounded = 0
    border_width = 0
    background_color = #feffff 0
    border_color = #d8d8d8 0
    # ID 3 - task
    rounded = 0
    border_width = 0
    background_color = #F5F5DC 0
    border_color = #000000 0
    # ID 4
    rounded = 0
    border_width = 1
    background_color = #888888 0
    border_color = #ED2323 60
    # ID 5 - taskbar
    rounded = 0
    border_width = 1
    background_color = #feffff 10
    border_color = #ffffff 10
    # ID 6 - active taskbar
    rounded = 0
    border_width = 1
    background_color = #feffff 30
    border_color = #ffffff 30
    # ID 7 - tooltip
    rounded = 3
    border_width = 0
    background_color = #222222 90
    border_color = #222222 90
    # ID 8
    rounded = 0
    border_width = 1
    background_color = #888888 20
    border_color = #888888 20
    # Panel
    panel_monitor = all
    panel_position = top left horizontal
    panel_items = LTSBC
    panel_size = 100% 32
    panel_margin = 0 1
    panel_padding = 3 3
    panel_dock = 0
    wm_menu = 1
    panel_layer = bottom
    panel_background_id = 1
    # Panel Autohide
    autohide = 0
    autohide_show_timeout = 0.3
    autohide_hide_timeout = 1.5
    autohide_height = 6
    strut_policy = follow_size
    # Taskbar
    taskbar_mode = multi_desktop
    taskbar_padding = 5 2
    taskbar_background_id = 5
    taskbar_active_background_id = 6
    taskbar_name = 1
    taskbar_name_background_id = 0
    taskbar_name_active_background_id = 0
    taskbar_name_font = Crisp 12
    taskbar_name_font_color = #ffffff 30
    taskbar_name_active_font_color = #ffffff 50
    # Tasks
    urgent_nb_of_blink = 20
    task_icon = 1
    task_text = 0
    task_centered = 1
    task_maximum_size = 20 20
    task_padding = 0 0
    task_background_id = 3
    task_active_background_id = 2
    task_urgent_background_id = 4
    task_iconified_background_id = 3
    # Task Icons
    task_icon_asb = 80 0 0
    task_active_icon_asb = 100 0 0
    task_urgent_icon_asb = 100 0 0
    task_iconified_icon_asb = 80 0 0
    # Fonts
    task_font = BankGothic Md BT 10
    task_font_color = #696969 60
    task_active_font_color = #696969 100
    task_urgent_font_color = #696969 100
    task_iconified_font_color = #696969 60
    font_shadow = 0
    # Launcher
    launcher_icon_theme = elementary
    launcher_padding = 2 2
    launcher_background_id = 1
    launcher_icon_size = 20
    # Specify icon theme names with launcher_icon_theme.
    # if you have an XSETTINGS manager running (like xfsettingsd), tint2 will follow your current theme.
    #launcher_icon_theme = AwOkenWhite
    # Each launcher_item_app must be a full path to a .desktop file
    launcher_item_app = /usr/share/applications/chromium.desktop
    launcher_item_app = /usr/share/applications/gparted.desktop
    # Clock
    time1_timezone = :/usr/share/zoneinfo/dir/Canada/Eastern
    time1_format = %I:%M %p
    time1_font = BankGothic Md BT 9
    #time2_format = %A, %B %d
    #time2_font = Ubuntu-L 7
    clock_font_color = #ffffff 80
    clock_padding = 5 0
    clock_background_id = 5
    clock_lclick_command = gsimplecal
    #lock_rclick_command =
    # System Tray
    systray = 1
    systray_padding = 2
    systray_sort = right2left
    systray_background_id = 5
    systray_icon_size = 20
    systray_icon_asb = 100 0 0
    # Tooltips
    tooltip = 0
    tooltip_padding = 2 2
    tooltip_show_timeout = 0.0
    tooltip_hide_timeout = 0.0
    tooltip_background_id = 7
    tooltip_font_color = #ff0000 100
    tooltip_font = Roboto-Thin normal 9.0
    # Mouse
    mouse_middle = none
    mouse_right = toggle
    mouse_scroll_up = toggle
    mouse_scroll_down = iconify
    # Battery
    battery = 1
    battery_hide = never
    battery_low_status = 10
    battery_low_cmd = notify-send "battery low"
    bat1_font = sans 8
    bat2_font = sans 6
    battery_font_color = #ffffff 80
    battery_padding = 5 0
    battery_background_id = 5
    # End of config
    Last edited by jolejo07 (2013-07-05 01:39:25)

    I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
    it telling me
    ==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
    ==> ERROR: Cannot find the strip binary required for object file stripping.
    Last edited by jolejo07 (2013-07-05 01:45:21)

  • How can we get ADFSecurity work when used in OC4J, OID and OAM?

    I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
    But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
    I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
    system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
    But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
    - The app works fine when I use without OAM. ADF Security permissions work fine.
    - The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
    - When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
    In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
    LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
    We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
    How can we get ADFSecurity work when used with OID and OAM?

    Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
    We have application specific roles which we map to OID roles using orion-application.xml.
    Any pointers to achieve this would be greatly appreciated.
    thanks,
    Dipal

  • Can't get webutil working on AS

    Hi All,
    As topic, I can't get webutil working on the application server. I can run individual forms or sessions that do not utilise webutil. As soon as I have baseHTMLjinitiator/baseHTMLjpi/baseHTML defined in the bit of the formsweb.cfg that I am using, I get this problem. The webutiljini.htm etc are located in the forms/server directory as they should be.
    I've got it working fine on my 10.1.2 developer suite XP platform.
    I've been trying without success on the App Server. Version 10.1.2 under Win2003
    I have been right through the installation instructions several time trying to see what I have missed.
    I have installed version 1.0.6 of webutil and version 1.8 of jacob.
    I try and run the wu_test_106 form, and all I get is "Applet Started" at the bottom of the browser window, and a blank browser window.
    My URL is
    http://10.64.125.51:7778/forms/frmservlet?config=webutil1
    The config in the formsweb.cfg is:
    [webutil1]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    baseHTML=webutilbase.htm
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=generic
    form=wu_test_106.fmx
    width=100%
    height=100%
    separateFrame=True
    The other parameters are default. If I try a different form name it makes no difference.
    I've done the other configuration stuff, default.env, signing jar files, etc.
    The java console just shows:
    Oracle JInitiator: Version 1.3.1.22
    Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\griggto01
    Proxy Configuration: Manual Configuration
    Proxy:
    Proxy Overrides:
    JAR cache enabled
    Location: C:\Documents and Settings\griggto01\Oracle Jar Cache
    Maximum size: 50 MB
    Compression level: 0
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    q: hide console
    s: dump system properties
    t: dump thread list
    x: clear classloader cache
    0-5: set trace level to <n>
    Loading http://10.64.125.51:7778/forms/java/frmwebutil.jar from JAR cache
    RegisterWebUtil - Loading WebUtil Version 1.0.6
    Thanks for your help.
    Tony

    Hi Tony,
    Form your post it doesn't look like jacob.jar is being loaded. Can you confirm that you have the following files in the <ORACLE_AS>/forms directory:
    java\
       jacob.jar
       frmwebutil.jar
    webutil\
       d2kwut60.dll
       jacob.dllAlso open up your default.env file and check that
    ORACLE_HOME         -- is correct
    FORMS_PATH            -- has the path where wu_test_106.fmx is located
    WEBUTIL_CONFIG      -- is correct (I've experienced what you describe when this path was invalid)
    CLASSPATH             -- contains frmwebutil.jar
    Regards
    Tom Casserly

Maybe you are looking for