CS3 Motion Teen problem
I am trying to use motion tweening to fade some text in and
out in a flash movie - when I move the timeline in the .fla the
fade happens as it should on the stage, however, when I use the
'test movie' option or export the movie, the text just appears
static - without any of the fades. Does anyone know if there's
anywhere in the program that has some sort of control over this?
I've tried it in a fresh blank .fla, and occasionally it works as
it should. But it never works in the .fla that I have the rest of
the animation working in. Any ideas anyone...??
I'm assuming you have the text in a symbol of some sort. If
you are using a dynamic text field for the text, that would be the
likely cause of the problem. If so, embed the font in it, or change
it to a static text field. If it is not a dynamic text field, then
I am currently at a loss to offer more.
Similar Messages
-
Hello all
I have been developing a game using flash CS3. It involves a
variety of objects, movieclips, buttons and motion tweens and a
whole bunch of actionscript. The development has been coming along
very nicely and I havent been experiencing many problems, until
now. I was close to finishing the game (with everything running
smoothly) and suddenly, the motion tweens on certain objects have
become broken. instead of smoothly tweening the object flickers
from on position to the next.
This all happened after absolutely no changes had been made
to the game source (.fla) file. What is strange is that even my
previous versions of the game (dating weeks prior to this point) ar
now experiencing the same flickering on motion tweens as in the
current version.
So, I have come to the conclusion that this is the result of
perhaps a corrupt flash settings file. When I log off my PC (with
windows XP Pro)and log back in to the same machine as a different
user, the problem was solved!! horray.... that only lasted for a
day though. Soon the same problem began again under the different
user.
Can anyone help me out?
Thanks for the help,
CodieMy suggestion is to make sure you are using the current
version of Flash Player. If that doesn't work, try finding a legacy
version fo the Flash Player (since it used to work). If the legacy
version solves the issue, contact Adobe and submit a bug.
Personally I've never had such an issue. It is possible to delete
your preferences. If I remember right, they are located in both
your registry and on your hard drive. I don't recall where to find
the things you need to delete, and I remember I had a hard time
finding that information. Sorry I can't be more help. -
Flash cs3 "Motion tweening will not occur on layers with ungrouped..."
I am getting the error message: flash cs3 "Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol"
I have only one symbol in the layer, a graphic.
Does anyone know how I can correct the "problem"?
Thanks in advance.
karen.as the above poster mentioned I am guessing you have more than one object on that layer. you may have created a symbol from a shape and not selected the stroke.. that is pretty common.
to verify what is on a particular keyframe do a "select all" cntrl-a or cmd-a. maybe you will see more than one item selected.
look at the properties panel. if you have only one thing it will note the symbol or it will say "mixed".
perform this test in the first and last keyframe. -
I upgraded to CS3 with no problems except I now find that if
I attempt to delete a word of pdf file that I know is linked to an
htm page, DW no longer gives me a warning message. This means that
If I do a sync. any updated word or pdf files do not get uploaded
to the server. If I do re-create the site cache the files still do
not get "re-linked". Anybody got an idea what is going on? I have
an awful lot of pdfs and docs linked from my site.
Thanx in advanceI figured out if I drag the file window to the left it will
stay on the left. I thought
before in previous version when you select files to be on the
left the preferences menu they would go to the left. Problem
solved.
RazorTrak -
CS3 Illustrator crashing problem
Hello all,
Lately my illustrator cs3 has been crashing every time I try to save a new file. It is so frustrating after doing all the work and can't save. I work on Windows XP 2002 system. Can anyone help?
Thanks so much!Hi Jacob, Just so you know, I was in a hurry and no way was able to buy an expensive product to do my artwork project. I couldn't find older TRIAL versions to download without 3rd party attached programs & BS that could be bad to do.
But, I need to go back on the forum to say that I rebooted to try one more time and it worked. Don't know why it didn't work the first time around because it was a fresh open of Illustrator, hadn't been working on it for a month then the first time didn't work.
I don't have time to go back on the forum right now got to leave for work. You can mention you heard this from me if you want so that people aren't misinformed.
thanks for replying
Jacob Bugge <[email protected]> wrote:
Jacob Bugge http://forums.adobe.com/people/Jacob+Bugge created the discussion
"Re: CS3 Illustrator crashing problem"
To view the discussion, visit: http://forums.adobe.com/message/5926730#5926730 -
I use Windows XP. In Photoshop CS3, everytime I try to put the distance for Motion Blur, the hole program closes. I don't really know what to do! Can anyone please help me?
System Info:
AMD Sempron 3000 +
1535 RAM.
163,3 G free.
ATI RADEON 9600 SE 128 MB.oops. :) forgot to post the link for you from the faq:
http://www.adobeforums.com/webx/.ef4a07f/1 -
Flash CS3 timeline display problems
I have just upgraded to Flash CS3 and immediately noticed a
problem when viewing and working with the Timeline window. When I
click on a frame (keyframe or other) it highlights that frame
completely white, which means I can no longer tell what type of
frame it is. The same happens if I highlight a series of frames,
they are all white and hard to interact with. If I highlight a
series of frames and attempt to Right-Click, I can rarely get a
sub-menu to show for quick options like 'Remove Frames' and 'Create
Motion Tween'. Most of the time my Right-Click is ignored
completely (ie nothing happens).
I have searched Google, Flashkit and Adobe site for help with
this, but no love. Has anyone else experienced this problem? The
rest of my CS3 install is working perfectly.
Computer: 20" iMac Intel 2.16Ghz Core 2 Duo, 2Gb RAM, 250Gb
HDD (~100Gb Free)
OS: Mac OS X 10.4.9
Version: Adobe Flash CS3 Version 9.0quote:
Originally posted by:
sczulu
Since upgrading from Flash V8, I'm having an issue where
prominent fonts (such as Myriad Pro) appear jaggy until the file is
published, making layout and design difficult. I've checked the
text display settings with now change in appearance. The files do
publish with anti-aliased text.
I've noticed this issue as well and was wondering why I was
having a problem, thanks for answering that question. -
Adobe Creative CS3 Design Premium - Problem with Photoshop CS3
Hi,
I have been trying to install Adobe Creative CS3 Design Premium for 2 days. The problem is when I try to install the software the Photoshop CS3 is gray out. I can install the all except the Photoshop. I have no idea what is wrong but has failed to install photoshop cs3. Do I need to unistall the Photoshop CS2 in order to make it work. Any help will be appreciated.
Thank you in advance.I have been looking at my error logs to try to see what my problem is and it only says the word error once at the bottom and I can't really tell what the error is for. It says successful on one line and then error on the next line. Is tehre anyone here that knows these logs well and can tell me what my problem is by reading my error logs?
[ 1] Tue Sep 8 11:23:16 2009 INFO
Completing installation for payload at /Volumes/Adobe CS3 Design Premium/Adobe CS3 Design Premium/Bootstrapper.dmg
[ 1] Tue Sep 8 11:23:16 2009 DEBUG
InstallPayload succeeded.
[ 0] Tue Sep 8 11:23:16 2009 ERROR
Log of: object
isRunning {string}: 0
Log of: string
0 {LOOP}: Reference to object up 0
percentComplete {string}: 100
Log of: string
0 {string}: 1
Log of: string
0 {LOOP}: Reference to object up 0
1 {string}: 0
Log of: string
0 {LOOP}: Reference to object up 0
2 {string}: 0
Log of: string
0 {LOOP}: Reference to object up 0
message {object}: [object Object]
Log of: object
code {string}: 0
Log of: string
0 {LOOP}: Reference to object up 0
args {object}: [object Object]
---end of log -
Dreamweaver CS3 First Run problems
Installing Dreamweaver CS3 Saga.
I've had some trouble and despite looking for answers and
trying a few things I'm getting nowhere. I've included a timeline
of events below to help explain.
0) System: New Dell Opliplex 745 running XP Pro Sp2 and
networked to a domain. Educational License ordered for MOPS school.
Disk delivered.
1) Tried installing in regular user's account. When it
prompted for admin details, I entered them, but it didn't work.
Insufficient rights to install, fair enough.
2) Logged on as domain admin. Tried installing. Failed!
Insufficient rights. Hmmm.
3) Logged on to local computer as administrator. Installed.
Success! However, could not find the serial number so selected
"trial" option. All worked ok. Emailed supplier to find out why
serial was not included with disk.
4) Gave regular user full admin rights on computer to avoid
future hassles.
5) Obtained serial from supplier (it was on the invoice).
Entered serial number while logged on as user. Dreamweaver accepted
serial but then a blank dialog box (titled Adobe Dreamweaver CS3)
opened over the top of the rest of Dreamweaver and froze up access
to Dreamweaver. Can't close box, can't interact with box apart from
moving it around over the top of DW. It doesn't count as a separate
window in the task bar.
6) Ended Dreamweaver process, loaded it again. Blank dialog
box appeared yet again however Dreamweaver began some adobe
updating. ~140mb download. Around 20mb in, some files began
installing - so far so good. Then, adobe updater vanished and we're
back to frozen dialog box.
7) Restarted computer. Logged on as user again, ran
Dreamweaver again. Frozen blank dialog box again HOWEVER I did find
that if I was quick I could interact normally with Dreamweaver,
open files, etc for a few seconds until dialog box kicks in. Also
when ending the task instead of ending the process, the windows
message says "The system cannot end this program because it is
waiting for a response from you. To return to windows and check the
status of the program, click cancel. If you choose to end the
program immediately, you will lose any unsaved data. To end the
program, click End Now." Obviously this refers to the blank dialog
box but I can't interact with the box so I can't respond to DW.
8) Remembering previous troubles, logged off and logged on to
local machine as administrator. Ran Dreamweaver again. This time an
initial dialog box asking about file associations popped up. Then,
Adobe update began running, this time 120mb download. Once again,
around 20mb in, some files installed and then Dreamweaver frozen
dialog box once more is revealed. The rest of the updates are
nowhere to be seen, adobe updater does not seem to be running any
more.
9) Found an issue in forums with corrupt Bonjour installation
causing DNS trouble. Figured this might be affecting the updates,
uninstalled the service as outlined elsewhere on this forum. Did
not help.
10) Decided to attempt a repair install from the disk. It
seemed to work but then only the shared components seemed to
install. But underneath that in the installation window, it said
both Dreamweaver and the Shared Components failed to install. So
did it fail or did it not fail? Your guess is as good as mine.
11) Ran Dreamweaver again. This time, a green "scrolling
credits" style window appeared, with "Click here to continue". Upon
clicking, the credits window disappeared and all looked well. I
alt-tabbed to something else but when I went back into Dreamweaver
the blank dialog window was back again.
I've searched the net, and scanned these forums but I am
unable to find a similar issue or any clue as to how to proceed
next.
I am going to try to uninstall Dreamweaver and reinstall it
fully, while logged on as local admin, probably I will use the CS3
clean script that I found on the forums to make sure its all gone;
and then I will enter the serial at the same time as installation
to avoid ever triggering the trial installation conditions. In the
meantime if anyone has any suggestions feel free to chip in with
ideas.
PS Further information which I just remembered: Internet
access is restricted by a proxy. Adobe updater worked fine after
giving it username and password to log on to the proxy. Perhaps
this frozen screen is trying to access the internet?Further information - when I tried to uninstall I was advised
by the uninstaller that I should deactivate CS3. But I couldn't
find how to do that in the few seconds before everything freezes.
I had an inspiration to pull the network plug out and sure
enough, the frozen window became a window which reads:
Dreamweaver is unable to connect to the internet to register
your product. I selected "Register Never" so hopefully this will
fix my problem! -
Adobe Flash CS3 detected a problem and has to be closed.
Hello,
I'm using Flash CS3 for a month, but the problem is that
since a week ago, flash CS3 stops working after 5 minutes of use.
So today I've downloaded the test version (30 days) in
another PC, but even with this other computer the software doesn't
works and has to be closed.
So that's not because of my computer. It's a more general
problem.
Did it happened to one of you? DO you know if flash CS3
doesn't work for everyone right now?
Do you know how to repair this kind of problem? I'm very
desperate and I really need to use flash. I don't know what to do.
Thank you very muchThere could be any number of items causing this. First off is do you have an active internet connection? If so have you tried rebooting you computer?
-
InDesign CS3 Swatch Palette Problem
Hi,
I have an issue in InDesign where the "Pantone Solid Coated" library is covering any other colour book I am trying to work with, including CMYK etc. Also I have to change a colour from Process to Spot and then back to Process again to be able to name it. I havd to re-install the Creative Suite on a different computer to the one I used before, and that's when this started. I am using CS3 Design Standard on an Intel Mac 10.4.11
If anyone has a solution, please do let me know as i have to use the programs more than 8 hours a day!
See attached screenshot below.
Thanks!!Hi Peter,
I did, but when I put them back I had the same swatch problem again, so will
have to re-save the settings I'm afraid.
Thanks!
Make copies of the files listed inthe link and store them in a safe place.
Next time you can just copy the backups into the real locations and you won't
need to rebuild anything.
> -
DW CS3 Page Properties problem - I don't have font, repeat options
I have been following some online tutorials and they are also in CS3, DW but my page properties layout and options are different within the program.
Is there something that needs updating/ downloading turning on in an advanced option? I have looked over the web and can find others with the same problem but not a solution.
Hope you can help.
The link below at the bottom of the page on the left has a thumb nail of the properties page which matches mine, note no repeat, font and other options are missing compared to others and I imagine yours.
http://forums.macrumors.com/showthread.php?t=361918
thanksI had the same problem although it was a previous update rather than this one that caused the problem. Just hadn't got round to doing something about it - was using Bing images instead.
I searched for some answers this morning and seemed like most suggestions were a nuisance to try. Couldn't find 'Preferences button of HTTPS-Everywhere' as suggested above. Decided to check if No Script was blocking it. Sure enough. So problem is solved.
Thought I'd put it out there in case it helps someone else. Appreciate that people are so helpful on here. -
Dreamweaver CS3 Paste HTML Problem
Hi, I'm a fairly basic user of Dreamweaver CS3. I used to be
able to paste HTML into webpages with no problem. I have recently
upgraded to CS3 and that menu command (Paste HTML) seems to have
gone. Can anybody help?
Thanks, your help would be appreciated!dsbrett wrote:
> Hi, I'm a fairly basic user of Dreamweaver CS3. I used
to be able to paste HTML
> into webpages with no problem. I have recently upgraded
to CS3 and that menu
> command (Paste HTML) seems to have gone.
If you want to paste the actual HTML code into a page, just
switch to
Code view, and paste.
Copy, cut, and paste in Dreamweaver are context-specific. If
you copy a
section of a page in Design view, and paste it in Design
view,
Dreamweaver automatically copies and pastes the underlying
HTML. If you
copy in Code view, and paste into Design view, Dreamweaver
assumes that
you want to display the code (as you might want to do in an
online
tutorial), so it converts all the angle tags into HTML
entities and
displays the tags and attributes in the page.
The simple rule is copy and paste from Code view to Code
view, or from
Design view to Design view.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
Flash CS3 - Odd button problem
Hello, Ive upgraded to Flash CS3 and I'm having a problem
with buttons.
When I open up my site, the old buttons work fine to navigate
the site and open up URL links. I have the actions on their own
layer instead of having an onRelease on each button.
However, when I create new buttons, they don't work.
I've even tried copying the existing working buttons,
applying the exact same actionscript to figure out what's going on,
but that also doesn't work, those buttons won't open up the URLs.
Am I perhaps using the wrong publish settings/flash player
choice?
ThanksThe answer is "skins" just search under "Creating skins for
some instances" in the Flash CS3 help file. -
So I have been making an animation to a voice over for a project. Comes in at about 2000+ frames with each animations different "scene" location split into 16 layers.
If I play the entire movie from start to finish my 2nd to last "scene's" motion tweens play really fast and repeat randomly.
If I use a gotoAndPlay to the frame where this "scene" starts the motion tween plays as intended.
The problem "scene" is setup like all my others with the "scene" being in its own movieclip on the main timeline, and then nesting other movieclips inside it. When I remove the tweens from the nested movieclips there is no movement issue, but obviously there is also no movement which I need.
My fix so far has been to add a goToAndPlay on the first frame of the problem "scene", eg "gotoAndPlay(1895); above frame 1895" which plays the tween correctly but makes my audio stutter when it hits that frame. So is not exactly the desired effect.
Note: when I say "scene" I don't mean flash scenes more taking about the different shots/locations of my animation.
I've searched google for hours to try find a similar issues with no success. So really do appreciate any help or ideas from some more experienced flashersYou're trying to have different slices fade in? If you just
want the image,
as a whole to fade in, import it and convert it to a
MovieClip and fade in
the clip.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/
Maybe you are looking for
-
I get this error message when I try to back up my laptop: ' Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. " Anyone know how to fix it?
-
Null pointer exception when starting application
Hi: I had a application running fine, then i had to change some parameters in my RFC. I reimported the model, removed all the excess mapping, rebuild, deployed , restarted the server. Then when i run the application, i get the below error. Anyone has
-
Selection screen in ALV output
Hi Experts, My requirement is - A selection screen should pop up on the click of a button in the ALV output. Using the parameters I input on the selection screen anothor ALV should be displayed on the same page at the bottom. I'm displaying ALV using
-
How to view CLOB column in SQLdeveloper
I'd like to know how to display the value of a CLOB column when in SQLDeveloper. Thanks.
-
I tried to update Photoshop CS6 through CC, and PS got corrupted and wont open now.
I tried to update Photoshop CS6 through CC, and PS got corrupted and wont open now. I uninstalled it, but now I can't re-install photoshop...installer just gives me the option to uninstall. This is my job, so very important . Thanks Johnny