CS3 Need to learn how to do a multicam edit

Gentlemen:
Just over 2 weeks ago I purchased a Canon A1s to go along with an A1 which I’ve been borrowing for several months. A long time ago, I endeavored to pick up the basics on how to multi-track and since then forgot the process as I only did it once and was only partially successful.
Now that I really need to quickly relearn the process in earnest out of necessity, I’d really appreciate any recommendations or pointers to where I can find a good online or offline (step by step) tutorial geared towards newbies on how to get this up and recording.
A search on Dogpile didn’t yield too much and I figure there has to be a lot more on the subject in depth that clearly lays it out somewhere!
Adobes manual is not up to the task.
Thanks so much in advance

Everything you need is right here.....  Just amazing.  I love it !!
Gets off to a slow start, but just hang with it...........  Editing part comes a bit into the tutorial.
I used it with a 3 cam event project.
http://tv.adobe.com/watch/short-and-suite/multicam-sync-and-editing/

Similar Messages

  • I must purchase a photo editing tool and don't know if I should go with Photoshop or Lightroom. I need to learn how to do basic photo editing on pictures used for a news website. Thoughts? Thanks!

    I must purchase a photo editing tool and don't know if I should go with Photoshop or Lightroom. I need to learn how to do basic photo editing on pictures used for a news website. Thoughts? Thanks!

    Hi scienceiscool,
    You can go ahead with the photography plan as mentioned in the link below:
    https://creative.adobe.com/plans/photography?promoid=KLXML
    Kindly refer to the link below to get used to the application better:
    Photoshop CC tutorials from novice to expert
    Regards,
    Sheena K

  • Hello, i am new to the mac and i need to learn how to re image using an external hard drive

    Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID  then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • Need to learn how to create a slideshow in Flash

    Hello All,
    I'm new to Flash and I need to learn how to do a slideshow with exactly the same features as can be found in this link:
    http://www.esppromo.com/index.asp
    Just like at the link above, it needs to play through the slides automatically once the page is loaded, each slide needs to link to a specific URL, and I need controls similar to the boxes at the bottom so the viewer can click on any specific slide they wish to view (I'd like to have numbers in the boxes though). The transitions don't have to slide across like this. If a fade is easier, that would be fine.
    Since I've looked online, but can't find any tutorials for doing this in Flash Professional, I think I'll pick up a book on Flash. There are some online tutorials that are close but nothing that is exactly what I'm looking for.
    I'm just wondering if anyone can recommend a particular book that covers creating this type of slide show with the links and controls exactly as I need it to be. I see these types of slide shows on a lot of sites now, so I'm hoping that maybe someone else on this forum has had to learn how to do this and can recommend a book they used?
    I was looking at Adobe Flash Professional CS5 Classroom in a Book and it looked like it may be what I'm after, but I am rather cautious, as I don't want to end up with instructions that are close to what I am looking for, but not quite right.
    Actually, I thought I'd be able to do this fairly easily with Flash Catalyst, so I updated to Adobe CS5 Design Premium. I found that Flash Catalyst can be used to create a slide show like this, but unfortunately it won't play automatically when the page loads and the viewer has to manually click through the slides, which is not what I need. I could be wrong, but from what I've read, I need Flash Builder to add code so the slide show will play automatically if I create it in Flash Catalyst. Since it's not an option for me to buy more software at this time, I've decided to learn how to do this in Flash Professional.
    I really want to learn how to do this. I expect to go on and create more using Flash, but for now I just REALLY need to figure this slide show out.
    If anyone can help out, I'd really appreciate it!
    Thanks,
    William

    Edit:
    i'm sorry. it is a huge work to type this and will be confusing as hell. i'm already up to 1 full word page of explanation. Though i am able to do it, explaning it in full lengh is ... well.. very hard. Way harder than it is to make your flash itself.
    I can however point you to some element you should read about how to make them:
    - How to use timeline in flash cs4
    - how to create a button in flash cs4
    - How to make "CLASSIC TWEEN" in flash cs4
    - How to use ActionScript 2 ( AS2) basic command like : GetUrl, Gotoandplay, Stop and how to put those script in the right location. ( AS2 allow you to put script directly on the button itself. however it is best to put it in the Action Layer that you will have to build in the timeline.
    - How to import thing in library.
    keep in mind that what you want to make is mostly a Logic probleme...
    - Image 1 click = GetURL X,
    - After Y time, Switch image 1 to image 2 with animation. Do the same for the button.
    - If you click on button 1 while being on image 3, you have to set all the reverse animation in the timeline, and use a lot of Gotoandplay.
    Hope this help you a little.
    I'm sorry. i really wanted to help you do it, but it is just a monstruous job to write all this.

  • I am very new to mac products, I have a Mac Pro 13" I  need to learn how to use it ? looking video courses any will helpI

    I am very new to mac products, I have a Mac Pro 13" I  need to learn how to use it ? looking video courses any will help .....

    Go to www.apple.com for a start. See, also, Mac Basics.

  • I need to learn how to use all about java & mysql...help me!

    I have a situation here, I need to learn how to use java with mysql
    . Can I connect to a MYSQL DB with servlets?
    how can I build an e-mail server with java (no matter how difficult)
    please, I need help, and I really apreciate your help.
    thank you very much!!

    I have a situation here, I need to learn how to use
    java with mysql
    . Can I connect to a MYSQL DB with servlets?Yes... documentation to help you connect to any database can be found at http://java.sun.com/products/jdbc. To connect to MySQL, you'll need drivers (sourceforge.net), and the specific connection URL for those drivers will be included in the documentation.
    how can I build an e-mail server with java (no matter
    how difficult)If you're fairly new to JSP/Servlets, you may be in over your head here, since an email server is no easy application to code. Here's a link to the source code for the JAMES project... Apache's Java email server... maybe you can find some useful information there...
    http://www.ibiblio.org/pub/packages/infosystems/WWW/servers/apache/jakarta/james/source/

  • I need to learn how to use jump lists.

    '''bold text'''I need to learn how to use jump lists. acording to all that I have muddled thru my ereader will only download books I have purchased and free ones if I use a jump list. I don't know how. If this is the correct method for ereaders downloads someone please explain it, simply to me. I have a reader I am totally unable to use. I have read the manual many times. That info doesn't work.

    How is that related to Firefox support?

  • I need to learn how to manage pictures on my I-pad.  I get multiples of pics taken and many that cannot be deleted.

    I need to learn how to manage pictures on my I-pad.  I get multiples of pictures taken & there are pictures I want to delete but can't.

    If you're syncing with iTunes, you'll have to un-sync to remove the ones you want to take off.
    Manually managing content with iTunes

  • Need to learn how I can re size a big pdf file in a Mac Book air

    Need to learn how resize pdf file in a Mac Book Air

    Oh, it's certainly possible, I just don't recommend you do it.
    If you really want to do it, go to Tools - Pages - Split Document and proceed from there.

  • New To Mac's Need to learn how to use it!

    I recently have become the owner of a Power Mac G4. I am a longtime pc user and now I need to learn as much about the Mac. Where can I get good clear complete manuals or books on just how the Mac works and how do you move around in one, such as looking at directories, creating the same, installing software programs, etc.
    Thanks!

    Welcome to Mac-dom!
    Here's another great Apple page with lots of instructional videos if, like me, you are a visual learner:
    http://www.apple.com/findouthow/mac/
    When you start thinking about hardware questions, consider posting in the other G4 forum here. You model number indicates you have a G4 "Quicksliver," one generation older than the ones covered in this forum. The forum labeling is so cryptic that is hard to figure out exactly where to post G4 questions. Either place will work, frankly.
    Updating your equipment line in your profile will make it faster to get help. A lot of people don't know an M8493 is a Quicksilver, so use the name instead. Also do "About this Mac" from the Apple menu to find your processor speed and amount of RAM installed. Adding that to the equipment line helps everyone.
    I hope you enjoy the Apple forums as much as I do. I've learned a lot here!
    A

  • Help need to learn how to do this?

    1. Name, which has fields:
        - String lastname
        - String firstname
    2. Address, which has fields:
        - int stnum
        - String street
        - String city
        - String postalCode
    3. PassengerRecord, which has fields:
        - int passengerID
        - Name passengerName
        - Address passengerAddr
    4. Passengers, which has fields:
        - int numpassengers
        - PassengerRecord[] passRecords
    5. TrainStation, which has fields:
        - String  trainStationName
        - Address trainStationAddr
        - Passengers passengerRecs
    The main routine, in class MainClass, MUST look like this:
    public static void main(String[] args){
      TrainStation station = new TrainStation();
      station.readIn();
      System.out.printf("station=%s",station.toString());
    }//main
    which creates an instance of class TrainStation,
    then calls the readIn() function of that TrainStation object which will:
    1.  read in the  trainStationName, which is a String
    2.  read in the trainStationAddr, by calling trainStationAddr.readIn()
    3.  read in passengerRecs, by calling passengerRecs.readIn() which
        reads in the number of PassengerRecord objects and
        creates the array passRecords.
        Then, passengerRecs.readIn() calls readIn() on each
        passenger record in array passRecords, which will
        in turn read in the passengerID,
        and call passengerName.readIn(), and passengerAddr.readIn()
    After calling station.readIn(), main will print out all of
    the contents of the TrainStation object pointed to by printing
    station.toString().can someone help me learn this fast like any places where i can read and learn how to do this?

    javakingloww wrote:
    can someone help me learn this fast like any places where i can read and learn how to do this?Assuming you went to class and payed attention, I would review the notes you took during class. Otherwise I would review any handouts or online material available that saved you from writing notes that day.
    Mel

  • I need to learn how to add a page at the end of my video to put credits?

    I am editing for the first time EVER and need to know how to add credits to the end of a video

    There are different ways to add credits. Did you have anything particular in mind?
    You may find some ideas here:
    How to Create Scrolling Movie Credits in Adobe Premiere Pro - YouTube
    https://helpx.adobe.com/premiere-pro/using/rolling-crawling-titles.html
    Creating and Editing Titles

  • I need to learn how to use my iphone 4

    Is there a video I can watch to learn how to really use my phone???

    Here's a good starting point.
    You can also sign up for classes at your local Apple store.

  • I need to learn how to use Illustrator CS6

    I have tried to access both the help topics and the video tutorials for Illustrator CS6.  Help topics always have no listing for learning how to use the program.  And the video tutorials will not run.

    What does that mean "will not run?" Any error? Doesn't show? No sound?
    Which system? Which browser? Which page exactly?

  • How do I do multicam editing in final cut pro 10.2?

    I updated to FCP 10.2 and when I right click on my videos that I want to use for multicam editing it shows nothing

    I think you're selecting clips in the timeline… not in the browser, which is where you need to work when you create multi clips. .
    Russ

Maybe you are looking for